From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/sh/boards/mach-highlander/setup.c | 416 +++++++++++++++++++++++++++++++++ 1 file changed, 416 insertions(+) create mode 100644 arch/sh/boards/mach-highlander/setup.c (limited to 'arch/sh/boards/mach-highlander/setup.c') diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c new file mode 100644 index 000000000..533393d77 --- /dev/null +++ b/arch/sh/boards/mach-highlander/setup.c @@ -0,0 +1,416 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * arch/sh/boards/renesas/r7780rp/setup.c + * + * Renesas Solutions Highlander Support. + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2005 - 2008 Paul Mundt + * + * This contains support for the R7780RP-1, R7780MP, and R7785RP + * Highlander modules. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct r8a66597_platdata r8a66597_data = { + .xtal = R8A66597_PLATDATA_XTAL_12MHZ, + .vif = 1, +}; + +static struct resource r8a66597_usb_host_resources[] = { + [0] = { + .start = 0xA4200000, + .end = 0xA42000FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EXT1, /* irq number */ + .end = IRQ_EXT1, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, +}; + +static struct platform_device r8a66597_usb_host_device = { + .name = "r8a66597_hcd", + .id = -1, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &r8a66597_data, + }, + .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), + .resource = r8a66597_usb_host_resources, +}; + +static struct m66592_platdata usbf_platdata = { + .xtal = M66592_PLATDATA_XTAL_24MHZ, + .vif = 1, +}; + +static struct resource m66592_usb_peripheral_resources[] = { + [0] = { + .name = "m66592_udc", + .start = 0xb0000000, + .end = 0xb00000FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "m66592_udc", + .start = IRQ_EXT4, /* irq number */ + .end = IRQ_EXT4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device m66592_usb_peripheral_device = { + .name = "m66592_udc", + .id = -1, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &usbf_platdata, + }, + .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources), + .resource = m66592_usb_peripheral_resources, +}; + +static struct resource cf_ide_resources[] = { + [0] = { + .start = PA_AREA5_IO + 0x1000, + .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PA_AREA5_IO + 0x80c, + .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_CF, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_OBLED, + .end = PA_OBLED, + .flags = IORESOURCE_MEM, + }, +}; + +#ifndef CONFIG_SH_R7785RP +static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), +}; +#endif + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + + /* R7785RP has a slightly more sensible FPGA.. */ +#ifndef CONFIG_SH_R7785RP + .dev = { + .platform_data = &heartbeat_data, + }, +#endif + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct ax_plat_data ax88796_platdata = { + .flags = AXFLG_HAS_93CX6, + .wordlength = 2, + .dcr_val = 0x1, + .rcr_val = 0x40, +}; + +static struct resource ax88796_resources[] = { + { +#ifdef CONFIG_SH_R7780RP + .start = 0xa5800400, + .end = 0xa5800400 + (0x20 * 0x2) - 1, +#else + .start = 0xa4100400, + .end = 0xa4100400 + (0x20 * 0x2) - 1, +#endif + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_AX88796, + .end = IRQ_AX88796, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ax88796_device = { + .name = "ax88796", + .id = 0, + + .dev = { + .platform_data = &ax88796_platdata, + }, + + .num_resources = ARRAY_SIZE(ax88796_resources), + .resource = ax88796_resources, +}; + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 4, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +/* This config is flash board for mass production. */ +static struct resource nor_flash_resources[] = { + [0] = { + .start = PA_NORFLASH_ADDR, + .end = PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +static struct resource smbus_resources[] = { + [0] = { + .start = PA_SMCR, + .end = PA_SMCR + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SMBUS, + .end = IRQ_SMBUS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smbus_device = { + .name = "i2c-highlander", + .id = 0, + .num_resources = ARRAY_SIZE(smbus_resources), + .resource = smbus_resources, +}; + +static struct i2c_board_info __initdata highlander_i2c_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, +}; + +static struct platform_device *r7780rp_devices[] __initdata = { + &r8a66597_usb_host_device, + &m66592_usb_peripheral_device, + &heartbeat_device, + &smbus_device, + &nor_flash_device, +#ifndef CONFIG_SH_R7780RP + &ax88796_device, +#endif +}; + +/* + * The CF is connected using a 16-bit bus where 8-bit operations are + * unsupported. The linux ata driver is however using 8-bit operations, so + * insert a trapped io filter to convert 8-bit operations into 16-bit. + */ +static struct trapped_io cf_trapped_io = { + .resource = cf_ide_resources, + .num_resources = 2, + .minimum_bus_width = 16, +}; + +static int __init r7780rp_devices_setup(void) +{ + int ret = 0; + +#ifndef CONFIG_SH_R7780RP + if (register_trapped_io(&cf_trapped_io) == 0) + ret |= platform_device_register(&cf_ide_device); +#endif + + ret |= platform_add_devices(r7780rp_devices, + ARRAY_SIZE(r7780rp_devices)); + + ret |= i2c_register_board_info(0, highlander_i2c_devices, + ARRAY_SIZE(highlander_i2c_devices)); + + return ret; +} +device_initcall(r7780rp_devices_setup); + +/* + * Platform specific clocks + */ +static int ivdr_clk_enable(struct clk *clk) +{ + __raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL); + return 0; +} + +static void ivdr_clk_disable(struct clk *clk) +{ + __raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL); +} + +static struct sh_clk_ops ivdr_clk_ops = { + .enable = ivdr_clk_enable, + .disable = ivdr_clk_disable, +}; + +static struct clk ivdr_clk = { + .ops = &ivdr_clk_ops, +}; + +static struct clk *r7780rp_clocks[] = { + &ivdr_clk, +}; + +static struct clk_lookup lookups[] = { + /* main clocks */ + CLKDEV_CON_ID("ivdr_clk", &ivdr_clk), +}; + +static void r7780rp_power_off(void) +{ + if (mach_is_r7780mp() || mach_is_r7785rp()) + __raw_writew(0x0001, PA_POFF); +} + +/* + * Initialize the board + */ +static void __init highlander_setup(char **cmdline_p) +{ + u16 ver = __raw_readw(PA_VERREG); + int i; + + printk(KERN_INFO "Renesas Solutions Highlander %s support.\n", + mach_is_r7780rp() ? "R7780RP-1" : + mach_is_r7780mp() ? "R7780MP" : + "R7785RP"); + + printk(KERN_INFO "Board version: %d (revision %d), " + "FPGA version: %d (revision %d)\n", + (ver >> 12) & 0xf, (ver >> 8) & 0xf, + (ver >> 4) & 0xf, ver & 0xf); + + highlander_plat_pinmux_setup(); + + /* + * Enable the important clocks right away.. + */ + for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) { + struct clk *clk = r7780rp_clocks[i]; + + clk_register(clk); + clk_enable(clk); + } + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + __raw_writew(0x0000, PA_OBLED); /* Clear LED. */ + + if (mach_is_r7780rp()) + __raw_writew(0x0001, PA_SDPOW); /* SD Power ON */ + + __raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ + + pm_power_off = r7780rp_power_off; +} + +static unsigned char irl2irq[HL_NR_IRL]; + +static int highlander_irq_demux(int irq) +{ + if (irq >= HL_NR_IRL || irq < 0 || !irl2irq[irq]) + return irq; + + return irl2irq[irq]; +} + +static void __init highlander_init_irq(void) +{ + unsigned char *ucp = highlander_plat_irq_setup(); + + if (ucp) { + plat_irq_setup_pins(IRQ_MODE_IRL3210); + memcpy(irl2irq, ucp, HL_NR_IRL); + } +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_highlander __initmv = { + .mv_name = "Highlander", + .mv_setup = highlander_setup, + .mv_init_irq = highlander_init_irq, + .mv_irq_demux = highlander_irq_demux, +}; -- cgit v1.2.3