From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/sh/boards/mach-sdk7786/Makefile | 5 + arch/sh/boards/mach-sdk7786/fpga.c | 69 +++++++++ arch/sh/boards/mach-sdk7786/gpio.c | 46 ++++++ arch/sh/boards/mach-sdk7786/irq.c | 45 ++++++ arch/sh/boards/mach-sdk7786/nmi.c | 80 +++++++++++ arch/sh/boards/mach-sdk7786/setup.c | 266 +++++++++++++++++++++++++++++++++++ arch/sh/boards/mach-sdk7786/sram.c | 69 +++++++++ 7 files changed, 580 insertions(+) create mode 100644 arch/sh/boards/mach-sdk7786/Makefile create mode 100644 arch/sh/boards/mach-sdk7786/fpga.c create mode 100644 arch/sh/boards/mach-sdk7786/gpio.c create mode 100644 arch/sh/boards/mach-sdk7786/irq.c create mode 100644 arch/sh/boards/mach-sdk7786/nmi.c create mode 100644 arch/sh/boards/mach-sdk7786/setup.c create mode 100644 arch/sh/boards/mach-sdk7786/sram.c (limited to 'arch/sh/boards/mach-sdk7786') diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile new file mode 100644 index 000000000..731a87c69 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-y := fpga.o irq.o nmi.o setup.o + +obj-$(CONFIG_GPIOLIB) += gpio.o +obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c new file mode 100644 index 000000000..a37e1e88c --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/fpga.c @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDK7786 FPGA Support. + * + * Copyright (C) 2010 Paul Mundt + */ +#include +#include +#include +#include +#include + +#define FPGA_REGS_OFFSET 0x03fff800 +#define FPGA_REGS_SIZE 0x490 + +/* + * The FPGA can be mapped in any of the generally available areas, + * so we attempt to scan for it using the fixed SRSTR read magic. + * + * Once the FPGA is located, the rest of the mapping data for the other + * components can be determined dynamically from its section mapping + * registers. + */ +static void __iomem *sdk7786_fpga_probe(void) +{ + unsigned long area; + void __iomem *base; + + /* + * Iterate over all of the areas where the FPGA could be mapped. + * The possible range is anywhere from area 0 through 6, area 7 + * is reserved. + */ + for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) { + base = ioremap(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE); + if (!base) { + /* Failed to remap this area, move along. */ + continue; + } + + if (ioread16(base + SRSTR) == SRSTR_MAGIC) + return base; /* Found it! */ + + iounmap(base); + } + + return NULL; +} + +void __iomem *sdk7786_fpga_base; + +void __init sdk7786_fpga_init(void) +{ + u16 version, date; + + sdk7786_fpga_base = sdk7786_fpga_probe(); + if (unlikely(!sdk7786_fpga_base)) { + panic("FPGA detection failed.\n"); + return; + } + + version = fpga_read_reg(FPGAVR); + date = fpga_read_reg(FPGADR); + + pr_info("\tFPGA version:\t%d.%d (built on %d/%d/%d)\n", + bcd2bin(version >> 8) & 0xf, bcd2bin(version & 0xf), + ((date >> 12) & 0xf) + 2000, + (date >> 8) & 0xf, bcd2bin(date & 0xff)); +} diff --git a/arch/sh/boards/mach-sdk7786/gpio.c b/arch/sh/boards/mach-sdk7786/gpio.c new file mode 100644 index 000000000..c4587d101 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/gpio.c @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDK7786 FPGA USRGPIR Support. + * + * Copyright (C) 2010 Paul Mundt + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define NR_FPGA_GPIOS 8 + +static const char *usrgpir_gpio_names[NR_FPGA_GPIOS] = { + "in0", "in1", "in2", "in3", "in4", "in5", "in6", "in7", +}; + +static int usrgpir_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + /* always in */ + return 0; +} + +static int usrgpir_gpio_get(struct gpio_chip *chip, unsigned gpio) +{ + return !!(fpga_read_reg(USRGPIR) & (1 << gpio)); +} + +static struct gpio_chip usrgpir_gpio_chip = { + .label = "sdk7786-fpga", + .names = usrgpir_gpio_names, + .direction_input = usrgpir_gpio_direction_input, + .get = usrgpir_gpio_get, + .base = -1, /* don't care */ + .ngpio = NR_FPGA_GPIOS, +}; + +static int __init usrgpir_gpio_setup(void) +{ + return gpiochip_add_data(&usrgpir_gpio_chip, NULL); +} +device_initcall(usrgpir_gpio_setup); diff --git a/arch/sh/boards/mach-sdk7786/irq.c b/arch/sh/boards/mach-sdk7786/irq.c new file mode 100644 index 000000000..340c306ea --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/irq.c @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDK7786 FPGA IRQ Controller Support. + * + * Copyright (C) 2010 Matt Fleming + * Copyright (C) 2010 Paul Mundt + */ +#include +#include +#include + +enum { + ATA_IRQ_BIT = 1, + SPI_BUSY_BIT = 2, + LIRQ5_BIT = 3, + LIRQ6_BIT = 4, + LIRQ7_BIT = 5, + LIRQ8_BIT = 6, + KEY_IRQ_BIT = 7, + PEN_IRQ_BIT = 8, + ETH_IRQ_BIT = 9, + RTC_ALARM_BIT = 10, + CRYSTAL_FAIL_BIT = 12, + ETH_PME_BIT = 14, +}; + +void __init sdk7786_init_irq(void) +{ + unsigned int tmp; + + /* Enable priority encoding for all IRLs */ + fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR); + + /* Clear FPGA interrupt status registers */ + fpga_write_reg(0x0000, INTASR); + fpga_write_reg(0x0000, INTBSR); + + /* Unmask FPGA interrupts */ + tmp = fpga_read_reg(INTAMR); + tmp &= ~(1 << ETH_IRQ_BIT); + fpga_write_reg(tmp, INTAMR); + + plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK); + plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); +} diff --git a/arch/sh/boards/mach-sdk7786/nmi.c b/arch/sh/boards/mach-sdk7786/nmi.c new file mode 100644 index 000000000..afba49679 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/nmi.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDK7786 FPGA NMI Support. + * + * Copyright (C) 2010 Paul Mundt + */ +#include +#include +#include +#include + +enum { + NMI_MODE_MANUAL, + NMI_MODE_AUX, + NMI_MODE_MASKED, + NMI_MODE_ANY, + NMI_MODE_UNKNOWN, +}; + +/* + * Default to the manual NMI switch. + */ +static unsigned int __initdata nmi_mode = NMI_MODE_ANY; + +static int __init nmi_mode_setup(char *str) +{ + if (!str) + return 0; + + if (strcmp(str, "manual") == 0) + nmi_mode = NMI_MODE_MANUAL; + else if (strcmp(str, "aux") == 0) + nmi_mode = NMI_MODE_AUX; + else if (strcmp(str, "masked") == 0) + nmi_mode = NMI_MODE_MASKED; + else if (strcmp(str, "any") == 0) + nmi_mode = NMI_MODE_ANY; + else { + nmi_mode = NMI_MODE_UNKNOWN; + pr_warn("Unknown NMI mode %s\n", str); + } + + printk("Set NMI mode to %d\n", nmi_mode); + return 0; +} +early_param("nmi_mode", nmi_mode_setup); + +void __init sdk7786_nmi_init(void) +{ + unsigned int source, mask, tmp; + + switch (nmi_mode) { + case NMI_MODE_MANUAL: + source = NMISR_MAN_NMI; + mask = NMIMR_MAN_NMIM; + break; + case NMI_MODE_AUX: + source = NMISR_AUX_NMI; + mask = NMIMR_AUX_NMIM; + break; + case NMI_MODE_ANY: + source = NMISR_MAN_NMI | NMISR_AUX_NMI; + mask = NMIMR_MAN_NMIM | NMIMR_AUX_NMIM; + break; + case NMI_MODE_MASKED: + case NMI_MODE_UNKNOWN: + default: + source = mask = 0; + break; + } + + /* Set the NMI source */ + tmp = fpga_read_reg(NMISR); + tmp &= ~NMISR_MASK; + tmp |= source; + fpga_write_reg(tmp, NMISR); + + /* And the IRQ masking */ + fpga_write_reg(NMIMR_MASK ^ mask, NMIMR); +} diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c new file mode 100644 index 000000000..d183026db --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas Technology Europe SDK7786 Support. + * + * Copyright (C) 2010 Matt Fleming + * Copyright (C) 2010 Paul Mundt + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct resource heartbeat_resource = { + .start = 0x07fff8b0, + .end = 0x07fff8b0 + sizeof(u16) - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = 1, + .resource = &heartbeat_resource, +}; + +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .name = "smsc911x-memory", + .start = 0x07ffff00, + .end = 0x07ffff00 + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "smsc911x-irq", + .start = evt2irq(0x2c0), + .end = evt2irq(0x2c0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct resource smbus_fpga_resource = { + .start = 0x07fff9e0, + .end = 0x07fff9e0 + SZ_32 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device smbus_fpga_device = { + .name = "i2c-sdk7786", + .id = 0, + .num_resources = 1, + .resource = &smbus_fpga_resource, +}; + +static struct resource smbus_pcie_resource = { + .start = 0x07fffc30, + .end = 0x07fffc30 + SZ_32 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device smbus_pcie_device = { + .name = "i2c-sdk7786", + .id = 1, + .num_resources = 1, + .resource = &smbus_pcie_resource, +}; + +static struct i2c_board_info __initdata sdk7786_i2c_devices[] = { + { + I2C_BOARD_INFO("max6900", 0x68), + }, +}; + +static struct platform_device *sh7786_devices[] __initdata = { + &heartbeat_device, + &smsc911x_device, + &smbus_fpga_device, + &smbus_pcie_device, +}; + +static int sdk7786_i2c_setup(void) +{ + unsigned int tmp; + + /* + * Hand over I2C control to the FPGA. + */ + tmp = fpga_read_reg(SBCR); + tmp &= ~SCBR_I2CCEN; + tmp |= SCBR_I2CMEN; + fpga_write_reg(tmp, SBCR); + + return i2c_register_board_info(0, sdk7786_i2c_devices, + ARRAY_SIZE(sdk7786_i2c_devices)); +} + +static int __init sdk7786_devices_setup(void) +{ + int ret; + + ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices)); + if (unlikely(ret != 0)) + return ret; + + return sdk7786_i2c_setup(); +} +device_initcall(sdk7786_devices_setup); + +static int sdk7786_mode_pins(void) +{ + return fpga_read_reg(MODSWR); +} + +/* + * FPGA-driven PCIe clocks + * + * Historically these include the oscillator, clock B (slots 2/3/4) and + * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove + * everything under a single PCIe clocks enable bit that happens to map + * to the same bit position as the oscillator bit for earlier FPGA + * versions. + * + * Given that the legacy clocks have the side-effect of shutting the CPU + * off through the FPGA along with the PCI slots, we simply leave them in + * their initial state and don't bother registering them with the clock + * framework. + */ +static int sdk7786_pcie_clk_enable(struct clk *clk) +{ + fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR); + return 0; +} + +static void sdk7786_pcie_clk_disable(struct clk *clk) +{ + fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR); +} + +static struct sh_clk_ops sdk7786_pcie_clk_ops = { + .enable = sdk7786_pcie_clk_enable, + .disable = sdk7786_pcie_clk_disable, +}; + +static struct clk sdk7786_pcie_clk = { + .ops = &sdk7786_pcie_clk_ops, +}; + +static struct clk_lookup sdk7786_pcie_cl = { + .con_id = "pcie_plat_clk", + .clk = &sdk7786_pcie_clk, +}; + +static int sdk7786_clk_init(void) +{ + struct clk *clk; + int ret; + + /* + * Only handle the EXTAL case, anyone interfacing a crystal + * resonator will need to provide their own input clock. + */ + if (test_mode_pin(MODE_PIN9)) + return -EINVAL; + + clk = clk_get(NULL, "extal"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + ret = clk_set_rate(clk, 33333333); + clk_put(clk); + + /* + * Setup the FPGA clocks. + */ + ret = clk_register(&sdk7786_pcie_clk); + if (unlikely(ret)) { + pr_err("FPGA clock registration failed\n"); + return ret; + } + + clkdev_add(&sdk7786_pcie_cl); + + return 0; +} + +static void sdk7786_restart(char *cmd) +{ + fpga_write_reg(0xa5a5, SRSTR); +} + +static void sdk7786_power_off(void) +{ + fpga_write_reg(fpga_read_reg(PWRCR) | PWRCR_PDWNREQ, PWRCR); + + /* + * It can take up to 20us for the R8C to do its job, back off and + * wait a bit until we've been shut off. Even though newer FPGA + * versions don't set the ACK bit, the latency issue remains. + */ + while ((fpga_read_reg(PWRCR) & PWRCR_PDWNACK) == 0) + cpu_sleep(); +} + +/* Initialize the board */ +static void __init sdk7786_setup(char **cmdline_p) +{ + pr_info("Renesas Technology Europe SDK7786 support:\n"); + + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + sdk7786_fpga_init(); + sdk7786_nmi_init(); + + pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf); + + machine_ops.restart = sdk7786_restart; + pm_power_off = sdk7786_power_off; + + register_smp_ops(&shx3_smp_ops); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_sdk7786 __initmv = { + .mv_name = "SDK7786", + .mv_setup = sdk7786_setup, + .mv_mode_pins = sdk7786_mode_pins, + .mv_clk_init = sdk7786_clk_init, + .mv_init_irq = sdk7786_init_irq, +}; diff --git a/arch/sh/boards/mach-sdk7786/sram.c b/arch/sh/boards/mach-sdk7786/sram.c new file mode 100644 index 000000000..7c6ca976f --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/sram.c @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDK7786 FPGA SRAM Support. + * + * Copyright (C) 2010 Paul Mundt + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +static int __init fpga_sram_init(void) +{ + unsigned long phys; + unsigned int area; + void __iomem *vaddr; + int ret; + u16 data; + + /* Enable FPGA SRAM */ + data = fpga_read_reg(LCLASR); + data |= LCLASR_FRAMEN; + fpga_write_reg(data, LCLASR); + + /* + * FPGA_SEL determines the area mapping + */ + area = (data & LCLASR_FPGA_SEL_MASK) >> LCLASR_FPGA_SEL_SHIFT; + if (unlikely(area == LCLASR_AREA_MASK)) { + pr_err("FPGA memory unmapped.\n"); + return -ENXIO; + } + + /* + * The memory itself occupies a 2KiB range at the top of the area + * immediately below the system registers. + */ + phys = (area << 26) + SZ_64M - SZ_4K; + + /* + * The FPGA SRAM resides in translatable physical space, so set + * up a mapping prior to inserting it in to the pool. + */ + vaddr = ioremap(phys, SZ_2K); + if (unlikely(!vaddr)) { + pr_err("Failed remapping FPGA memory.\n"); + return -ENXIO; + } + + pr_info("Adding %dKiB of FPGA memory at 0x%08lx-0x%08lx " + "(area %d) to pool.\n", + SZ_2K >> 10, phys, phys + SZ_2K - 1, area); + + ret = gen_pool_add(sram_pool, (unsigned long)vaddr, SZ_2K, -1); + if (unlikely(ret < 0)) { + pr_err("Failed adding memory\n"); + iounmap(vaddr); + return ret; + } + + return 0; +} +postcore_initcall(fpga_sram_init); -- cgit v1.2.3