From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/sh/kernel/cpu/proc.c | 151 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 151 insertions(+) create mode 100644 arch/sh/kernel/cpu/proc.c (limited to 'arch/sh/kernel/cpu/proc.c') diff --git a/arch/sh/kernel/cpu/proc.c b/arch/sh/kernel/cpu/proc.c new file mode 100644 index 000000000..a306bcd6b --- /dev/null +++ b/arch/sh/kernel/cpu/proc.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include + +static const char *cpu_name[] = { + [CPU_SH7201] = "SH7201", + [CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263", + [CPU_SH7264] = "SH7264", [CPU_SH7269] = "SH7269", + [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", + [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", + [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", + [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", + [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720", + [CPU_SH7721] = "SH7721", [CPU_SH7729] = "SH7729", + [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S", + [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", + [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760", + [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", + [CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770", + [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", + [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", + [CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757", + [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", + [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723", + [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724", + [CPU_SH7372] = "SH7372", [CPU_SH7734] = "SH7734", + [CPU_J2] = "J2", + [CPU_SH_NONE] = "Unknown" +}; + +const char *get_cpu_subtype(struct sh_cpuinfo *c) +{ + return cpu_name[c->type]; +} +EXPORT_SYMBOL(get_cpu_subtype); + +#ifdef CONFIG_PROC_FS +/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */ +static const char *cpu_flags[] = { + "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", + "ptea", "llsc", "l2", "op32", "pteaex", NULL +}; + +static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c) +{ + unsigned long i; + + seq_printf(m, "cpu flags\t:"); + + if (!c->flags) { + seq_printf(m, " %s\n", cpu_flags[0]); + return; + } + + for (i = 0; cpu_flags[i]; i++) + if ((c->flags & (1 << i))) + seq_printf(m, " %s", cpu_flags[i+1]); + + seq_printf(m, "\n"); +} + +static void show_cacheinfo(struct seq_file *m, const char *type, + struct cache_info info) +{ + unsigned int cache_size; + + cache_size = info.ways * info.sets * info.linesz; + + seq_printf(m, "%s size\t: %2dKiB (%d-way)\n", + type, cache_size >> 10, info.ways); +} + +/* + * Get CPU information for use by the procfs. + */ +static int show_cpuinfo(struct seq_file *m, void *v) +{ + struct sh_cpuinfo *c = v; + unsigned int cpu = c - cpu_data; + + if (!cpu_online(cpu)) + return 0; + + if (cpu == 0) + seq_printf(m, "machine\t\t: %s\n", get_system_type()); + else + seq_printf(m, "\n"); + + seq_printf(m, "processor\t: %d\n", cpu); + seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); + seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c)); + if (c->cut_major == -1) + seq_printf(m, "cut\t\t: unknown\n"); + else if (c->cut_minor == -1) + seq_printf(m, "cut\t\t: %d.x\n", c->cut_major); + else + seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor); + + show_cpuflags(m, c); + + seq_printf(m, "cache type\t: "); + + /* + * Check for what type of cache we have, we support both the + * unified cache on the SH-2 and SH-3, as well as the harvard + * style cache on the SH-4. + */ + if (c->icache.flags & SH_CACHE_COMBINED) { + seq_printf(m, "unified\n"); + show_cacheinfo(m, "cache", c->icache); + } else { + seq_printf(m, "split (harvard)\n"); + show_cacheinfo(m, "icache", c->icache); + show_cacheinfo(m, "dcache", c->dcache); + } + + /* Optional secondary cache */ + if (c->flags & CPU_HAS_L2_CACHE) + show_cacheinfo(m, "scache", c->scache); + + seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits); + + seq_printf(m, "bogomips\t: %lu.%02lu\n", + c->loops_per_jiffy/(500000/HZ), + (c->loops_per_jiffy/(5000/HZ)) % 100); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < NR_CPUS ? cpu_data + *pos : NULL; +} +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} +static void c_stop(struct seq_file *m, void *v) +{ +} +const struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; +#endif /* CONFIG_PROC_FS */ -- cgit v1.2.3