From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/sh/kernel/cpu/sh2/Makefile | 12 ++ arch/sh/kernel/cpu/sh2/clock-sh7619.c | 74 +++++++ arch/sh/kernel/cpu/sh2/entry.S | 373 ++++++++++++++++++++++++++++++++++ arch/sh/kernel/cpu/sh2/ex.S | 44 ++++ arch/sh/kernel/cpu/sh2/probe.c | 71 +++++++ arch/sh/kernel/cpu/sh2/setup-sh7619.c | 205 +++++++++++++++++++ arch/sh/kernel/cpu/sh2/smp-j2.c | 136 +++++++++++++ 7 files changed, 915 insertions(+) create mode 100644 arch/sh/kernel/cpu/sh2/Makefile create mode 100644 arch/sh/kernel/cpu/sh2/clock-sh7619.c create mode 100644 arch/sh/kernel/cpu/sh2/entry.S create mode 100644 arch/sh/kernel/cpu/sh2/ex.S create mode 100644 arch/sh/kernel/cpu/sh2/probe.c create mode 100644 arch/sh/kernel/cpu/sh2/setup-sh7619.c create mode 100644 arch/sh/kernel/cpu/sh2/smp-j2.c (limited to 'arch/sh/kernel/cpu/sh2') diff --git a/arch/sh/kernel/cpu/sh2/Makefile b/arch/sh/kernel/cpu/sh2/Makefile new file mode 100644 index 000000000..214c3a5b1 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the Linux/SuperH SH-2 backends. +# + +obj-y := ex.o probe.o entry.o + +obj-$(CONFIG_CPU_SUBTYPE_SH7619) += setup-sh7619.o clock-sh7619.o + +# SMP setup +smp-$(CONFIG_CPU_J2) := smp-j2.o +obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c new file mode 100644 index 000000000..d66d194c7 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * arch/sh/kernel/cpu/sh2/clock-sh7619.c + * + * SH7619 support for the clock framework + * + * Copyright (C) 2006 Yoshinori Sato + * + * Based on clock-sh4.c + * Copyright (C) 2005 Paul Mundt + */ +#include +#include +#include +#include +#include +#include + +static const int pll1rate[] = {1,2}; +static const int pfc_divisors[] = {1,2,0,4}; +static unsigned int pll2_mult; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7]; +} + +static struct sh_clk_ops sh7619_master_clk_ops = { + .init = master_clk_init, +}; + +static unsigned long module_clk_recalc(struct clk *clk) +{ + int idx = (__raw_readw(FREQCR) & 0x0007); + return clk->parent->rate / pfc_divisors[idx]; +} + +static struct sh_clk_ops sh7619_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static unsigned long bus_clk_recalc(struct clk *clk) +{ + return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 7]; +} + +static struct sh_clk_ops sh7619_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static struct sh_clk_ops sh7619_cpu_clk_ops = { + .recalc = followparent_recalc, +}; + +static struct sh_clk_ops *sh7619_clk_ops[] = { + &sh7619_master_clk_ops, + &sh7619_module_clk_ops, + &sh7619_bus_clk_ops, + &sh7619_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx) +{ + if (test_mode_pin(MODE_PIN2 | MODE_PIN0) || + test_mode_pin(MODE_PIN2 | MODE_PIN1)) + pll2_mult = 2; + else if (test_mode_pin(MODE_PIN0) || test_mode_pin(MODE_PIN1)) + pll2_mult = 4; + + BUG_ON(!pll2_mult); + + if (idx < ARRAY_SIZE(sh7619_clk_ops)) + *ops = sh7619_clk_ops[idx]; +} diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S new file mode 100644 index 000000000..0a1c2bf21 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -0,0 +1,373 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * arch/sh/kernel/cpu/sh2/entry.S + * + * The SH-2 exception entry + * + * Copyright (C) 2005-2008 Yoshinori Sato + * Copyright (C) 2005 AXE,Inc. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Offsets to the stack */ +OFF_R0 = 0 /* Return value. New ABI also arg4 */ +OFF_R1 = 4 /* New ABI: arg5 */ +OFF_R2 = 8 /* New ABI: arg6 */ +OFF_R3 = 12 /* New ABI: syscall_nr */ +OFF_R4 = 16 /* New ABI: arg0 */ +OFF_R5 = 20 /* New ABI: arg1 */ +OFF_R6 = 24 /* New ABI: arg2 */ +OFF_R7 = 28 /* New ABI: arg3 */ +OFF_SP = (15*4) +OFF_PC = (16*4) +OFF_SR = (16*4+2*4) +OFF_TRA = (16*4+6*4) + +#include + +ENTRY(exception_handler) + ! stack + ! r0 <- point sp + ! r1 + ! pc + ! sr + ! r0 = temporary + ! r1 = vector (pseudo EXPEVT / INTEVT / TRA) + mov.l r2,@-sp + mov.l r3,@-sp + cli + mov.l $cpu_mode,r2 +#ifdef CONFIG_SMP + mov.l $cpuid,r3 + mov.l @r3,r3 + mov.l @r3,r3 + shll2 r3 + add r3,r2 +#endif + mov.l @r2,r0 + mov.l @(5*4,r15),r3 ! previous SR + or r0,r3 ! set MD + tst r0,r0 + bf/s 1f ! previous mode check + mov.l r3,@(5*4,r15) ! update SR + ! switch to kernel mode + mov.l __md_bit,r0 + mov.l r0,@r2 ! enter kernel mode + mov.l $current_thread_info,r2 +#ifdef CONFIG_SMP + mov.l $cpuid,r0 + mov.l @r0,r0 + mov.l @r0,r0 + shll2 r0 + add r0,r2 +#endif + mov.l @r2,r2 + mov #(THREAD_SIZE >> 8),r0 + shll8 r0 + add r2,r0 + mov r15,r2 ! r2 = user stack top + mov r0,r15 ! switch kernel stack + mov.l r1,@-r15 ! TRA + sts.l macl, @-r15 + sts.l mach, @-r15 + stc.l gbr, @-r15 + mov.l @(5*4,r2),r0 + mov.l r0,@-r15 ! original SR + sts.l pr,@-r15 + mov.l @(4*4,r2),r0 + mov.l r0,@-r15 ! original PC + mov r2,r3 + add #(4+2)*4,r3 ! rewind r0 - r3 + exception frame + mov.l r3,@-r15 ! original SP + mov.l r14,@-r15 + mov.l r13,@-r15 + mov.l r12,@-r15 + mov.l r11,@-r15 + mov.l r10,@-r15 + mov.l r9,@-r15 + mov.l r8,@-r15 + mov.l r7,@-r15 + mov.l r6,@-r15 + mov.l r5,@-r15 + mov.l r4,@-r15 + mov r1,r9 ! save TRA + mov r2,r8 ! copy user -> kernel stack + mov.l @(0,r8),r3 + mov.l r3,@-r15 + mov.l @(4,r8),r2 + mov.l r2,@-r15 + mov.l @(12,r8),r1 + mov.l r1,@-r15 + mov.l @(8,r8),r0 + bra 2f + mov.l r0,@-r15 +1: + ! in kernel exception + mov #(22-4-4-1)*4+4,r0 + mov r15,r2 + sub r0,r15 + mov.l @r2+,r0 ! old R3 + mov.l r0,@-r15 + mov.l @r2+,r0 ! old R2 + mov.l r0,@-r15 + mov.l @(4,r2),r0 ! old R1 + mov.l r0,@-r15 + mov.l @r2,r0 ! old R0 + mov.l r0,@-r15 + add #8,r2 + mov.l @r2+,r3 ! old PC + mov.l @r2+,r0 ! old SR + add #-4,r2 ! exception frame stub (sr) + mov.l r1,@-r2 ! TRA + sts.l macl, @-r2 + sts.l mach, @-r2 + stc.l gbr, @-r2 + mov.l r0,@-r2 ! save old SR + sts.l pr,@-r2 + mov.l r3,@-r2 ! save old PC + mov r2,r0 + add #8*4,r0 + mov.l r0,@-r2 ! save old SP + mov.l r14,@-r2 + mov.l r13,@-r2 + mov.l r12,@-r2 + mov.l r11,@-r2 + mov.l r10,@-r2 + mov.l r9,@-r2 + mov.l r8,@-r2 + mov.l r7,@-r2 + mov.l r6,@-r2 + mov.l r5,@-r2 + mov.l r4,@-r2 + mov r1,r9 + mov.l @(OFF_R0,r15),r0 + mov.l @(OFF_R1,r15),r1 + mov.l @(OFF_R2,r15),r2 + mov.l @(OFF_R3,r15),r3 +2: + mov #64,r8 + cmp/hs r8,r9 + bt interrupt_entry ! vec >= 64 is interrupt + mov #31,r8 + cmp/hs r8,r9 + bt trap_entry ! 64 > vec >= 31 is trap +#ifdef CONFIG_CPU_J2 + mov #16,r8 + cmp/hs r8,r9 + bt interrupt_entry ! 31 > vec >= 16 is interrupt +#endif + + mov.l 4f,r8 + mov r9,r4 + shll2 r9 + add r9,r8 + mov.l @r8,r8 ! exception handler address + tst r8,r8 + bf 3f + mov.l 8f,r8 ! unhandled exception +3: + mov.l 5f,r10 + jmp @r8 + lds r10,pr + +interrupt_entry: + mov r9,r4 + mov r15,r5 + mov.l 6f,r9 + mov.l 7f,r8 + jmp @r8 + lds r9,pr + + .align 2 +4: .long exception_handling_table +5: .long ret_from_exception +6: .long ret_from_irq +7: .long do_IRQ +8: .long exception_error + +trap_entry: + mov #0x30,r8 + cmp/ge r8,r9 ! vector 0x1f-0x2f is systemcall + bt 1f + mov #0x1f,r9 ! convert to unified SH2/3/4 trap number +1: + shll2 r9 ! TRA + bra system_call ! jump common systemcall entry + mov r9,r8 + +#if defined(CONFIG_SH_STANDARD_BIOS) + /* Unwind the stack and jmp to the debug entry */ +ENTRY(sh_bios_handler) + mov r15,r0 + add #(22-4)*4-4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + mov r15,r0 + mov.l @(OFF_SP,r0),r1 + mov #OFF_SR,r2 + mov.l @(r0,r2),r3 + mov.l r3,@-r1 + mov #OFF_SP,r2 + mov.l @(r0,r2),r3 + mov.l r3,@-r1 + mov r15,r0 + add #(22-4)*4-8,r0 + mov.l 1f,r2 + mov.l @r2,r2 + stc sr,r3 + mov.l r2,@r0 + mov.l r3,@(4,r0) + mov.l r1,@(8,r0) + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + mov.l @r15+, r7 + mov.l @r15+, r8 + mov.l @r15+, r9 + mov.l @r15+, r10 + mov.l @r15+, r11 + mov.l @r15+, r12 + mov.l @r15+, r13 + mov.l @r15+, r14 + add #8,r15 + lds.l @r15+, pr + mov.l @r15+,r15 + rte + nop + .align 2 +1: .long gdb_vbr_vector +#endif /* CONFIG_SH_STANDARD_BIOS */ + +ENTRY(address_error_trap_handler) + mov r15,r4 ! regs + mov #OFF_PC,r0 + mov.l @(r0,r15),r6 ! pc + mov.l 1f,r0 + jmp @r0 + mov #0,r5 ! writeaccess is unknown + + .align 2 +1: .long do_address_error + +restore_all: + stc sr,r0 + or #0xf0,r0 + ldc r0,sr ! all interrupt block (same BL = 1) + ! restore special register + ! overlap exception frame + mov r15,r0 + add #17*4,r0 + lds.l @r0+,pr + add #4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + mov r15,r0 + mov.l $cpu_mode,r2 +#ifdef CONFIG_SMP + mov.l $cpuid,r3 + mov.l @r3,r3 + mov.l @r3,r3 + shll2 r3 + add r3,r2 +#endif + mov #OFF_SR,r3 + mov.l @(r0,r3),r1 + mov.l __md_bit,r3 + and r1,r3 ! copy MD bit + mov.l r3,@r2 + shll2 r1 ! clear MD bit + shlr2 r1 + mov.l @(OFF_SP,r0),r2 + add #-8,r2 + mov.l r2,@(OFF_SP,r0) ! point exception frame top + mov.l r1,@(4,r2) ! set sr + mov #OFF_PC,r3 + mov.l @(r0,r3),r1 + mov.l r1,@r2 ! set pc + get_current_thread_info r0, r1 + mov.l $current_thread_info,r1 +#ifdef CONFIG_SMP + mov.l $cpuid,r3 + mov.l @r3,r3 + mov.l @r3,r3 + shll2 r3 + add r3,r1 +#endif + mov.l r0,@r1 + mov.l @r15+,r0 + mov.l @r15+,r1 + mov.l @r15+,r2 + mov.l @r15+,r3 + mov.l @r15+,r4 + mov.l @r15+,r5 + mov.l @r15+,r6 + mov.l @r15+,r7 + mov.l @r15+,r8 + mov.l @r15+,r9 + mov.l @r15+,r10 + mov.l @r15+,r11 + mov.l @r15+,r12 + mov.l @r15+,r13 + mov.l @r15+,r14 + mov.l @r15,r15 + rte + nop + + .align 2 +__md_bit: + .long 0x40000000 +$current_thread_info: + .long __current_thread_info +$cpu_mode: + .long __cpu_mode +#ifdef CONFIG_SMP +$cpuid: + .long sh2_cpuid_addr +#endif + +! common exception handler +#include "../../entry-common.S" + +#ifdef CONFIG_NR_CPUS +#define NR_CPUS CONFIG_NR_CPUS +#else +#define NR_CPUS 1 +#endif + + .data +! cpu operation mode +! bit30 = MD (compatible SH3/4) +__cpu_mode: + .rept NR_CPUS + .long 0x40000000 + .endr + +#ifdef CONFIG_SMP +.global sh2_cpuid_addr +sh2_cpuid_addr: + .long dummy_cpuid +dummy_cpuid: + .long 0 +#endif + + .section .bss +__current_thread_info: + .rept NR_CPUS + .long 0 + .endr + +ENTRY(exception_handling_table) + .space 4*32 diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S new file mode 100644 index 000000000..dd0cc887a --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/ex.S @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * arch/sh/kernel/cpu/sh2/ex.S + * + * The SH-2 exception vector table + * + * Copyright (C) 2005 Yoshinori Sato + */ + +#include + +! +! convert Exception Vector to Exception Number +! +exception_entry: +no = 0 + .rept 256 + mov.l r1,@-sp + bra exception_trampoline + mov #no,r1 +no = no + 1 + .endr +exception_trampoline: + mov.l r0,@-sp + mov.l $exception_handler,r0 + extu.b r1,r1 + jmp @r0 + extu.w r1,r1 + + .align 2 +$exception_entry: + .long exception_entry +$exception_handler: + .long exception_handler +! +! Exception Vector Base +! + .align 2 +ENTRY(vbr_base) +vector = 0 + .rept 256 + .long exception_entry + vector * 6 +vector = vector + 1 + .endr diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c new file mode 100644 index 000000000..d342ea088 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/probe.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * arch/sh/kernel/cpu/sh2/probe.c + * + * CPU Subtype Probing for SH-2. + * + * Copyright (C) 2002 Paul Mundt + */ +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_CPU_J2) +extern u32 __iomem *j2_ccr_base; +static int __init scan_cache(unsigned long node, const char *uname, + int depth, void *data) +{ + if (!of_flat_dt_is_compatible(node, "jcore,cache")) + return 0; + + j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node); + + return 1; +} +#endif + +void __ref cpu_probe(void) +{ +#if defined(CONFIG_CPU_SUBTYPE_SH7619) + boot_cpu_data.type = CPU_SH7619; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.dcache.way_incr = (1<<12); + boot_cpu_data.dcache.sets = 256; + boot_cpu_data.dcache.entry_shift = 4; + boot_cpu_data.dcache.linesz = L1_CACHE_BYTES; + boot_cpu_data.dcache.flags = 0; +#endif + +#if defined(CONFIG_CPU_J2) +#if defined(CONFIG_SMP) + unsigned cpu = hard_smp_processor_id(); +#else + unsigned cpu = 0; +#endif + if (cpu == 0) of_scan_flat_dt(scan_cache, NULL); + if (j2_ccr_base) __raw_writel(0x80000303, j2_ccr_base + 4*cpu); + if (cpu != 0) return; + boot_cpu_data.type = CPU_J2; + + /* These defaults are appropriate for the original/current + * J2 cache. Once there is a proper framework for getting cache + * info from device tree, we should switch to that. */ + boot_cpu_data.dcache.ways = 1; + boot_cpu_data.dcache.sets = 256; + boot_cpu_data.dcache.entry_shift = 5; + boot_cpu_data.dcache.linesz = 32; + boot_cpu_data.dcache.flags = 0; + + boot_cpu_data.flags |= CPU_HAS_CAS_L; +#else + /* + * SH-2 doesn't have separate caches + */ + boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED; +#endif + boot_cpu_data.icache = boot_cpu_data.dcache; + boot_cpu_data.family = CPU_FAMILY_SH2; +} diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c new file mode 100644 index 000000000..b1c877b6a --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SH7619 Setup + * + * Copyright (C) 2006 Yoshinori Sato + * Copyright (C) 2009 Paul Mundt + */ +#include +#include +#include +#include +#include +#include +#include +#include + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + WDT, EDMAC, CMT0, CMT1, + SCIF0, SCIF1, SCIF2, + HIF_HIFI, HIF_HIFBI, + DMAC0, DMAC1, DMAC2, DMAC3, + SIOF, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65), + INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67), + INTC_IRQ(IRQ4, 80), INTC_IRQ(IRQ5, 81), + INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83), + INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85), + INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87), + INTC_IRQ(SCIF0, 88), INTC_IRQ(SCIF0, 89), + INTC_IRQ(SCIF0, 90), INTC_IRQ(SCIF0, 91), + INTC_IRQ(SCIF1, 92), INTC_IRQ(SCIF1, 93), + INTC_IRQ(SCIF1, 94), INTC_IRQ(SCIF1, 95), + INTC_IRQ(SCIF2, 96), INTC_IRQ(SCIF2, 97), + INTC_IRQ(SCIF2, 98), INTC_IRQ(SCIF2, 99), + INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101), + INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105), + INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107), + INTC_IRQ(SIOF, 108), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, + { 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xf8080000, 0, 16, 4, /* IPRC */ { WDT, EDMAC, CMT0, CMT1 } }, + { 0xf8080002, 0, 16, 4, /* IPRD */ { SCIF0, SCIF1, SCIF2 } }, + { 0xf8080004, 0, 16, 4, /* IPRE */ { HIF_HIFI, HIF_HIFBI } }, + { 0xf8080006, 0, 16, 4, /* IPRF */ { DMAC0, DMAC1, DMAC2, DMAC3 } }, + { 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL, + NULL, prio_registers, NULL); + +static struct plat_sci_port scif0_platform_data = { + .scscr = SCSCR_REIE, + .type = PORT_SCIF, +}; + +static struct resource scif0_resources[] = { + DEFINE_RES_MEM(0xf8400000, 0x100), + DEFINE_RES_IRQ(88), +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .resource = scif0_resources, + .num_resources = ARRAY_SIZE(scif0_resources), + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .scscr = SCSCR_REIE, + .type = PORT_SCIF, +}; + +static struct resource scif1_resources[] = { + DEFINE_RES_MEM(0xf8410000, 0x100), + DEFINE_RES_IRQ(92), +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .resource = scif1_resources, + .num_resources = ARRAY_SIZE(scif1_resources), + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .scscr = SCSCR_REIE, + .type = PORT_SCIF, +}; + +static struct resource scif2_resources[] = { + DEFINE_RES_MEM(0xf8420000, 0x100), + DEFINE_RES_IRQ(96), +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .resource = scif2_resources, + .num_resources = ARRAY_SIZE(scif2_resources), + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct sh_eth_plat_data eth_platform_data = { + .phy = 1, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct resource eth_resources[] = { + [0] = { + .start = 0xfb000000, + .end = 0xfb0001c7, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 85, + .end = 85, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device eth_device = { + .name = "sh7619-ether", + .id = -1, + .dev = { + .platform_data = ð_platform_data, + }, + .num_resources = ARRAY_SIZE(eth_resources), + .resource = eth_resources, +}; + +static struct sh_timer_config cmt_platform_data = { + .channels_mask = 3, +}; + +static struct resource cmt_resources[] = { + DEFINE_RES_MEM(0xf84a0070, 0x10), + DEFINE_RES_IRQ(86), + DEFINE_RES_IRQ(87), +}; + +static struct platform_device cmt_device = { + .name = "sh-cmt-16", + .id = 0, + .dev = { + .platform_data = &cmt_platform_data, + }, + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), +}; + +static struct platform_device *sh7619_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + ð_device, + &cmt_device, +}; + +static int __init sh7619_devices_setup(void) +{ + return platform_add_devices(sh7619_devices, + ARRAY_SIZE(sh7619_devices)); +} +arch_initcall(sh7619_devices_setup); + +void __init plat_irq_setup(void) +{ + register_intc_controller(&intc_desc); +} + +static struct platform_device *sh7619_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &cmt_device, +}; + +#define STBCR3 0xf80a0000 + +void __init plat_early_device_setup(void) +{ + /* enable CMT clock */ + __raw_writeb(__raw_readb(STBCR3) & ~0x10, STBCR3); + + sh_early_platform_add_devices(sh7619_early_devices, + ARRAY_SIZE(sh7619_early_devices)); +} diff --git a/arch/sh/kernel/cpu/sh2/smp-j2.c b/arch/sh/kernel/cpu/sh2/smp-j2.c new file mode 100644 index 000000000..d0d5d8145 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/smp-j2.c @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SMP support for J2 processor + * + * Copyright (C) 2015-2016 Smart Energy Instruments, Inc. + */ + +#include +#include +#include +#include +#include +#include + +DEFINE_PER_CPU(unsigned, j2_ipi_messages); + +extern u32 *sh2_cpuid_addr; +static u32 *j2_ipi_trigger; +static int j2_ipi_irq; + +static irqreturn_t j2_ipi_interrupt_handler(int irq, void *arg) +{ + unsigned cpu = hard_smp_processor_id(); + volatile unsigned *pmsg = &per_cpu(j2_ipi_messages, cpu); + unsigned messages, i; + + do messages = *pmsg; + while (cmpxchg(pmsg, messages, 0) != messages); + + if (!messages) return IRQ_NONE; + + for (i=0; i