From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/sparc/Kconfig | 493 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 493 insertions(+) create mode 100644 arch/sparc/Kconfig (limited to 'arch/sparc/Kconfig') diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig new file mode 100644 index 000000000..4d3d1af90 --- /dev/null +++ b/arch/sparc/Kconfig @@ -0,0 +1,493 @@ +# SPDX-License-Identifier: GPL-2.0-only +config 64BIT + bool "64-bit kernel" if "$(ARCH)" = "sparc" + default "$(ARCH)" = "sparc64" + help + SPARC is a family of RISC microprocessors designed and marketed by + Sun Microsystems, incorporated. They are very widely found in Sun + workstations and clones. + + Say yes to build a 64-bit kernel - formerly known as sparc64 + Say no to build a 32-bit kernel - formerly known as sparc + +config SPARC + bool + default y + select ARCH_MIGHT_HAVE_PC_PARPORT if SPARC64 && PCI + select ARCH_MIGHT_HAVE_PC_SERIO + select DMA_OPS + select OF + select OF_PROMTREE + select HAVE_ASM_MODVERSIONS + select HAVE_ARCH_KGDB if !SMP || SPARC64 + select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_SECCOMP if SPARC64 + select HAVE_EXIT_THREAD + select HAVE_PCI + select SYSCTL_EXCEPTION_TRACE + select RTC_CLASS + select RTC_DRV_M48T59 + select RTC_SYSTOHC + select HAVE_ARCH_JUMP_LABEL if SPARC64 + select GENERIC_IRQ_SHOW + select ARCH_WANT_IPC_PARSE_VERSION + select GENERIC_PCI_IOMAP + select HAVE_NMI_WATCHDOG if SPARC64 + select HAVE_CBPF_JIT if SPARC32 + select HAVE_EBPF_JIT if SPARC64 + select HAVE_DEBUG_BUGVERBOSE + select GENERIC_SMP_IDLE_THREAD + select MODULES_USE_ELF_RELA + select PCI_SYSCALL if PCI + select PCI_MSI_ARCH_FALLBACKS if PCI_MSI + select ODD_RT_SIGACTION + select OLD_SIGSUSPEND + select CPU_NO_EFFICIENT_FFS + select LOCKDEP_SMALL if LOCKDEP + select NEED_DMA_MAP_STATE + select NEED_SG_DMA_LENGTH + select TRACE_IRQFLAGS_SUPPORT + +config SPARC32 + def_bool !64BIT + select ARCH_32BIT_OFF_T + select ARCH_HAS_SYNC_DMA_FOR_CPU + select CLZ_TAB + select DMA_DIRECT_REMAP + select GENERIC_ATOMIC64 + select HAVE_UID16 + select OLD_SIGACTION + select ZONE_DMA + +config SPARC64 + def_bool 64BIT + select ALTERNATE_USER_ADDRESS_SPACE + select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_KRETPROBES + select HAVE_KPROBES + select MMU_GATHER_RCU_TABLE_FREE if SMP + select MMU_GATHER_MERGE_VMAS + select MMU_GATHER_NO_FLUSH_CACHE + select HAVE_ARCH_TRANSPARENT_HUGEPAGE + select HAVE_DYNAMIC_FTRACE + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_SYSCALL_TRACEPOINTS + select HAVE_CONTEXT_TRACKING_USER + select HAVE_TIF_NOHZ + select HAVE_DEBUG_KMEMLEAK + select IOMMU_HELPER + select SPARSE_IRQ + select RTC_DRV_CMOS + select RTC_DRV_BQ4802 + select RTC_DRV_SUN4V + select RTC_DRV_STARFIRE + select HAVE_PERF_EVENTS + select PERF_USE_VMALLOC + select ARCH_HAVE_NMI_SAFE_CMPXCHG + select HAVE_C_RECORDMCOUNT + select HAVE_ARCH_AUDITSYSCALL + select ARCH_SUPPORTS_ATOMIC_RMW + select ARCH_SUPPORTS_DEBUG_PAGEALLOC + select HAVE_NMI + select HAVE_REGS_AND_STACK_ACCESS_API + select ARCH_USE_QUEUED_RWLOCKS + select ARCH_USE_QUEUED_SPINLOCKS + select GENERIC_TIME_VSYSCALL + select ARCH_CLOCKSOURCE_DATA + select ARCH_HAS_PTE_SPECIAL + select PCI_DOMAINS if PCI + select ARCH_HAS_GIGANTIC_PAGE + select HAVE_SOFTIRQ_ON_OWN_STACK + select HAVE_SETUP_PER_CPU_AREA + select NEED_PER_CPU_EMBED_FIRST_CHUNK + select NEED_PER_CPU_PAGE_FIRST_CHUNK + +config ARCH_PROC_KCORE_TEXT + def_bool y + +config CPU_BIG_ENDIAN + def_bool y + +config ARCH_ATU + bool + default y if SPARC64 + +config STACKTRACE_SUPPORT + bool + default y if SPARC64 + +config LOCKDEP_SUPPORT + bool + default y if SPARC64 + +config ARCH_HIBERNATION_POSSIBLE + def_bool y if SPARC64 + +config AUDIT_ARCH + bool + default y + +config MMU + bool + default y + +config HIGHMEM + bool + default y if SPARC32 + select KMAP_LOCAL + +config GENERIC_ISA_DMA + bool + default y if SPARC32 + +config PGTABLE_LEVELS + default 4 if 64BIT + default 3 + +config ARCH_SUPPORTS_UPROBES + def_bool y if SPARC64 + +menu "Processor type and features" + +config SMP + bool "Symmetric multi-processing support" + help + This enables support for systems with more than one CPU. If you have + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. + + If you say N here, the kernel will run on uni- and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + uniprocessor machines. On a uniprocessor machine, the kernel + will run faster if you say N here. + + People using multiprocessor machines who say Y here should also say + Y to "Enhanced Real Time Clock Support", below. The "Advanced Power + Management" code will be disabled if you say Y here. + + See also and the SMP-HOWTO + available at . + + If you don't know what to do here, say N. + +config NR_CPUS + int "Maximum number of CPUs" + depends on SMP + range 2 32 if SPARC32 + range 2 4096 if SPARC64 + default 32 if SPARC32 + default 4096 if SPARC64 + +source "kernel/Kconfig.hz" + +config GENERIC_HWEIGHT + bool + default y + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config ARCH_MAY_HAVE_PC_FDC + bool + default y + +config EMULATED_CMPXCHG + bool + default y if SPARC32 + help + Sparc32 does not have a CAS instruction like sparc64. cmpxchg() + is emulated, and therefore it is not completely atomic. + +# Makefile helpers +config SPARC32_SMP + bool + default y + depends on SPARC32 && SMP + +config SPARC64_SMP + bool + default y + depends on SPARC64 && SMP + +config EARLYFB + bool "Support for early boot text console" + default y + depends on SPARC64 + help + Say Y here to enable a faster early framebuffer boot console. + +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs" + depends on SPARC64 && SMP + help + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu/cpu#. + Say N if you want to disable CPU hotplug. + +if SPARC64 +source "drivers/cpufreq/Kconfig" +endif + +config US3_MC + tristate "UltraSPARC-III Memory Controller driver" + depends on SPARC64 + default y + help + This adds a driver for the UltraSPARC-III memory controller. + Loading this driver allows exact mnemonic strings to be + printed in the event of a memory error, so that the faulty DIMM + on the motherboard can be matched to the error. + + If in doubt, say Y, as this information can be very useful. + +# Global things across all Sun machines. +config GENERIC_LOCKBREAK + bool + default y + depends on SPARC64 && SMP && PREEMPTION + +config NUMA + bool "NUMA support" + depends on SPARC64 && SMP + +config NODES_SHIFT + int "Maximum NUMA Nodes (as a power of 2)" + range 4 5 if SPARC64 + default "5" + depends on NUMA + help + Specify the maximum number of NUMA Nodes available on the target + system. Increases memory reserved to accommodate various tables. + +config ARCH_SPARSEMEM_ENABLE + def_bool y if SPARC64 + select SPARSEMEM_VMEMMAP_ENABLE + +config ARCH_SPARSEMEM_DEFAULT + def_bool y if SPARC64 + +config ARCH_FORCE_MAX_ORDER + int "Maximum zone order" + default "13" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 13 means that the largest free memory block is 2^12 pages. + +if SPARC64 +source "kernel/power/Kconfig" +endif + +config SCHED_SMT + bool "SMT (Hyperthreading) scheduler support" + depends on SPARC64 && SMP + default y + help + SMT scheduler support improves the CPU scheduler's decision making + when dealing with SPARC cpus at a cost of slightly increased overhead + in some places. If unsure say N here. + +config SCHED_MC + bool "Multi-core scheduler support" + depends on SPARC64 && SMP + default y + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config CMDLINE_BOOL + bool "Default bootloader kernel arguments" + depends on SPARC64 + +config CMDLINE + string "Initial kernel command string" + depends on CMDLINE_BOOL + default "console=ttyS0,9600 root=/dev/sda1" + help + Say Y here if you want to be able to pass default arguments to + the kernel. This will be overridden by the bootloader, if you + use one (such as SILO). This is most useful if you want to boot + a kernel from TFTP, and want default options to be available + with having them passed on the command line. + + NOTE: This option WILL override the PROM bootargs setting! + +config SUN_PM + bool + default y if SPARC32 + help + Enable power management and CPU standby features on supported + SPARC platforms. + +config SPARC_LED + tristate "Sun4m LED driver" + depends on SPARC32 + help + This driver toggles the front-panel LED on sun4m systems + in a user-specifiable manner. Its state can be probed + by reading /proc/led and its blinking mode can be changed + via writes to /proc/led + +config SERIAL_CONSOLE + bool + depends on SPARC32 + default y + help + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (silo) about how to pass options to the kernel at + boot time.) + + If you don't have a graphics card installed and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + If unsure, say N. + +config SPARC_LEON + bool "Sparc Leon processor family" + depends on SPARC32 + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC + select USB_UHCI_BIG_ENDIAN_MMIO + select USB_UHCI_BIG_ENDIAN_DESC + help + If you say Y here if you are running on a SPARC-LEON processor. + The LEON processor is a synthesizable VHDL model of the + SPARC-v8 standard. LEON is part of the GRLIB collection of + IP cores that are distributed under GPL. GRLIB can be downloaded + from www.gaisler.com. You can download a sparc-linux cross-compilation + toolchain at www.gaisler.com. + +if SPARC_LEON +menu "U-Boot options" + +config UBOOT_LOAD_ADDR + hex "uImage Load Address" + default 0x40004000 + help + U-Boot kernel load address, the address in physical address space + where u-boot will place the Linux kernel before booting it. + This address is normally the base address of main memory + 0x4000. + +config UBOOT_FLASH_ADDR + hex "uImage.o Load Address" + default 0x00080000 + help + Optional setting only affecting the uImage.o ELF-image used to + download the uImage file to the target using a ELF-loader other than + U-Boot. It may for example be used to download an uImage to FLASH with + the GRMON utility before even starting u-boot. + +config UBOOT_ENTRY_ADDR + hex "uImage Entry Address" + default 0xf0004000 + help + Do not change this unless you know what you're doing. This is + hardcoded by the SPARC32 and LEON port. + + This is the virtual address u-boot jumps to when booting the Linux + Kernel. + +endmenu +endif + +endmenu + +menu "Bus options (PCI etc.)" +config SBUS + bool + default y + +config SBUSCHAR + bool + default y + +config SUN_LDOMS + bool "Sun Logical Domains support" + depends on SPARC64 + help + Say Y here is you want to support virtual devices via + Logical Domains. + +config PCIC_PCI + bool + depends on PCI && SPARC32 && !SPARC_LEON + default y + +config LEON_PCI + bool + depends on PCI && SPARC_LEON + default y + +config SPARC_GRPCI1 + bool "GRPCI Host Bridge Support" + depends on LEON_PCI + default y + help + Say Y here to include the GRPCI Host Bridge Driver. The GRPCI + PCI host controller is typically found in GRLIB SPARC32/LEON + systems. The driver has one property (all_pci_errors) controlled + from the bootloader that makes the GRPCI to generate interrupts + on detected PCI Parity and System errors. + +config SPARC_GRPCI2 + bool "GRPCI2 Host Bridge Support" + depends on LEON_PCI + default y + help + Say Y here to include the GRPCI2 Host Bridge Driver. + +config SUN_OPENPROMFS + tristate "Openprom tree appears in /proc/openprom" + help + If you say Y, the OpenPROM device tree will be available as a + virtual file system, which you can mount to /proc/openprom by "mount + -t openpromfs none /proc/openprom". + + To compile the /proc/openprom support as a module, choose M here: the + module will be called openpromfs. + + Only choose N if you know in advance that you will not need to modify + OpenPROM settings on the running system. + +# Makefile helpers +config SPARC64_PCI + bool + default y + depends on SPARC64 && PCI + +config SPARC64_PCI_MSI + bool + default y + depends on SPARC64_PCI && PCI_MSI + +endmenu + +config COMPAT + bool + depends on SPARC64 + default y + select HAVE_UID16 + select ARCH_WANT_OLD_COMPAT_IPC + select COMPAT_OLD_SIGACTION + +source "drivers/sbus/char/Kconfig" -- cgit v1.2.3