From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/sparc/include/asm/thread_info_64.h | 242 ++++++++++++++++++++++++++++++++ 1 file changed, 242 insertions(+) create mode 100644 arch/sparc/include/asm/thread_info_64.h (limited to 'arch/sparc/include/asm/thread_info_64.h') diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h new file mode 100644 index 000000000..1a44372e2 --- /dev/null +++ b/arch/sparc/include/asm/thread_info_64.h @@ -0,0 +1,242 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* thread_info.h: sparc64 low-level thread information + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#define NSWINS 7 + +#define TI_FLAG_BYTE_FAULT_CODE 0 +#define TI_FLAG_FAULT_CODE_SHIFT 56 +#define TI_FLAG_BYTE_WSTATE 1 +#define TI_FLAG_WSTATE_SHIFT 48 +#define TI_FLAG_BYTE_NOERROR 2 +#define TI_FLAG_BYTE_NOERROR_SHIFT 40 +#define TI_FLAG_BYTE_FPDEPTH 3 +#define TI_FLAG_FPDEPTH_SHIFT 32 +#define TI_FLAG_BYTE_CWP 4 +#define TI_FLAG_CWP_SHIFT 24 +#define TI_FLAG_BYTE_WSAVED 5 +#define TI_FLAG_WSAVED_SHIFT 16 + +#include + +#ifndef __ASSEMBLY__ + +#include +#include + +struct task_struct; + +struct thread_info { + /* D$ line 1 */ + struct task_struct *task; + unsigned long flags; + __u8 fpsaved[7]; + __u8 status; + unsigned long ksp; + + /* D$ line 2 */ + unsigned long fault_address; + struct pt_regs *kregs; + int preempt_count; /* 0 => preemptable, <0 => BUG */ + __u8 new_child; + __u8 __pad; + __u16 cpu; + + unsigned long *utraps; + + struct reg_window reg_window[NSWINS]; + unsigned long rwbuf_stkptrs[NSWINS]; + + unsigned long gsr[7]; + unsigned long xfsr[7]; + + struct pt_regs *kern_una_regs; + unsigned int kern_una_insn; + + unsigned long fpregs[(7 * 256) / sizeof(unsigned long)] + __attribute__ ((aligned(64))); +}; + +#endif /* !(__ASSEMBLY__) */ + +/* offsets into the thread_info struct for assembly code access */ +#define TI_TASK 0x00000000 +#define TI_FLAGS 0x00000008 +#define TI_FAULT_CODE (TI_FLAGS + TI_FLAG_BYTE_FAULT_CODE) +#define TI_WSTATE (TI_FLAGS + TI_FLAG_BYTE_WSTATE) +#define TI_CWP (TI_FLAGS + TI_FLAG_BYTE_CWP) +#define TI_FPDEPTH (TI_FLAGS + TI_FLAG_BYTE_FPDEPTH) +#define TI_WSAVED (TI_FLAGS + TI_FLAG_BYTE_WSAVED) +#define TI_SYS_NOERROR (TI_FLAGS + TI_FLAG_BYTE_NOERROR) +#define TI_FPSAVED 0x00000010 +#define TI_KSP 0x00000018 +#define TI_FAULT_ADDR 0x00000020 +#define TI_KREGS 0x00000028 +#define TI_PRE_COUNT 0x00000030 +#define TI_NEW_CHILD 0x00000034 +#define TI_CPU 0x00000036 +#define TI_UTRAPS 0x00000038 +#define TI_REG_WINDOW 0x00000040 +#define TI_RWIN_SPTRS 0x000003c0 +#define TI_GSR 0x000003f8 +#define TI_XFSR 0x00000430 +#define TI_KUNA_REGS 0x00000468 +#define TI_KUNA_INSN 0x00000470 +#define TI_FPREGS 0x00000480 + +/* We embed this in the uppermost byte of thread_info->flags */ +#define FAULT_CODE_WRITE 0x01 /* Write access, implies D-TLB */ +#define FAULT_CODE_DTLB 0x02 /* Miss happened in D-TLB */ +#define FAULT_CODE_ITLB 0x04 /* Miss happened in I-TLB */ +#define FAULT_CODE_WINFIXUP 0x08 /* Miss happened during spill/fill */ +#define FAULT_CODE_BLKCOMMIT 0x10 /* Use blk-commit ASI in copy_page */ +#define FAULT_CODE_BAD_RA 0x20 /* Bad RA for sun4v */ + +#if PAGE_SHIFT == 13 +#define THREAD_SIZE (2*PAGE_SIZE) +#define THREAD_SHIFT (PAGE_SHIFT + 1) +#else /* PAGE_SHIFT == 13 */ +#define THREAD_SIZE PAGE_SIZE +#define THREAD_SHIFT PAGE_SHIFT +#endif /* PAGE_SHIFT == 13 */ + +/* + * macros/functions for gaining access to the thread information structure + */ +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .preempt_count = INIT_PREEMPT_COUNT, \ + .kregs = (struct pt_regs *)(init_stack+THREAD_SIZE)-1 \ +} + +/* how to get the thread information struct from C */ +#ifndef BUILD_VDSO +register struct thread_info *current_thread_info_reg asm("g6"); +#define current_thread_info() (current_thread_info_reg) +#else +extern struct thread_info *current_thread_info(void); +#endif + +/* thread information allocation */ +#if PAGE_SHIFT == 13 +#define THREAD_SIZE_ORDER 1 +#else /* PAGE_SHIFT == 13 */ +#define THREAD_SIZE_ORDER 0 +#endif /* PAGE_SHIFT == 13 */ + +#define __thread_flag_byte_ptr(ti) \ + ((unsigned char *)(&((ti)->flags))) +#define __cur_thread_flag_byte_ptr __thread_flag_byte_ptr(current_thread_info()) + +#define get_thread_fault_code() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE]) +#define set_thread_fault_code(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE] = (val)) +#define get_thread_wstate() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE]) +#define set_thread_wstate(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE] = (val)) +#define get_thread_cwp() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP]) +#define set_thread_cwp(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP] = (val)) +#define get_thread_noerror() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_NOERROR]) +#define set_thread_noerror(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_NOERROR] = (val)) +#define get_thread_fpdepth() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH]) +#define set_thread_fpdepth(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH] = (val)) +#define get_thread_wsaved() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED]) +#define set_thread_wsaved(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED] = (val)) +#endif /* !(__ASSEMBLY__) */ + +/* + * Thread information flags, only 16 bits are available as we encode + * other values into the upper 6 bytes. + * + * On trap return we need to test several values: + * + * user: need_resched, notify_resume, sigpending, wsaved + * kernel: fpdepth + * + * So to check for work in the kernel case we simply load the fpdepth + * byte out of the flags and test it. For the user case we encode the + * lower 3 bytes of flags as follows: + * ---------------------------------------- + * | wsaved | flags byte 1 | flags byte 2 | + * ---------------------------------------- + * This optimizes the user test into: + * ldx [%g6 + TI_FLAGS], REG1 + * sethi %hi(_TIF_USER_WORK_MASK), REG2 + * or REG2, %lo(_TIF_USER_WORK_MASK), REG2 + * andcc REG1, REG2, %g0 + * be,pt no_work_to_do + * nop + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_NOTIFY_SIGNAL 4 /* signal notifications exist */ +#define TIF_UNALIGNED 5 /* allowed to do unaligned accesses */ +#define TIF_UPROBE 6 /* breakpointed or singlestepped */ +#define TIF_32BIT 7 /* 32-bit binary */ +#define TIF_NOHZ 8 /* in adaptive nohz mode */ +#define TIF_SECCOMP 9 /* secure computing */ +#define TIF_SYSCALL_AUDIT 10 /* syscall auditing active */ +#define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */ +/* NOTE: Thread flags >= 12 should be ones we have no interest + * in using in assembly, else we can't use the mask as + * an immediate value in instructions such as andcc. + */ +#define TIF_MCDPER 12 /* Precise MCD exception */ +#define TIF_MEMDIE 13 /* is terminating due to OOM killer */ +#define TIF_POLLING_NRFLAG 14 + +#define _TIF_SYSCALL_TRACE (1<