From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/sparc/kernel/etrap_32.S | 281 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 281 insertions(+) create mode 100644 arch/sparc/kernel/etrap_32.S (limited to 'arch/sparc/kernel/etrap_32.S') diff --git a/arch/sparc/kernel/etrap_32.S b/arch/sparc/kernel/etrap_32.S new file mode 100644 index 000000000..9f243f918 --- /dev/null +++ b/arch/sparc/kernel/etrap_32.S @@ -0,0 +1,281 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * etrap.S: Sparc trap window preparation for entry into the + * Linux kernel. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Registers to not touch at all. */ +#define t_psr l0 /* Set by caller */ +#define t_pc l1 /* Set by caller */ +#define t_npc l2 /* Set by caller */ +#define t_wim l3 /* Set by caller */ +#define t_twinmask l4 /* Set at beginning of this entry routine. */ +#define t_kstack l5 /* Set right before pt_regs frame is built */ +#define t_retpc l6 /* If you change this, change winmacro.h header file */ +#define t_systable l7 /* Never touch this, could be the syscall table ptr. */ +#define curptr g6 /* Set after pt_regs frame is built */ + + .text + .align 4 + + /* SEVEN WINDOW PATCH INSTRUCTIONS */ + .globl tsetup_7win_patch1, tsetup_7win_patch2 + .globl tsetup_7win_patch3, tsetup_7win_patch4 + .globl tsetup_7win_patch5, tsetup_7win_patch6 +tsetup_7win_patch1: sll %t_wim, 0x6, %t_wim +tsetup_7win_patch2: and %g2, 0x7f, %g2 +tsetup_7win_patch3: and %g2, 0x7f, %g2 +tsetup_7win_patch4: and %g1, 0x7f, %g1 +tsetup_7win_patch5: sll %t_wim, 0x6, %t_wim +tsetup_7win_patch6: and %g2, 0x7f, %g2 + /* END OF PATCH INSTRUCTIONS */ + + /* At trap time, interrupts and all generic traps do the + * following: + * + * rd %psr, %l0 + * b some_handler + * rd %wim, %l3 + * nop + * + * Then 'some_handler' if it needs a trap frame (ie. it has + * to call c-code and the trap cannot be handled in-window) + * then it does the SAVE_ALL macro in entry.S which does + * + * sethi %hi(trap_setup), %l4 + * jmpl %l4 + %lo(trap_setup), %l6 + * nop + */ + + /* 2 3 4 window number + * ----- + * O T S mnemonic + * + * O == Current window before trap + * T == Window entered when trap occurred + * S == Window we will need to save if (1<w_saved */ + st %g0, [%curptr + TI_W_SAVED] + + /* See if we are in the trap window. */ + andcc %t_twinmask, %t_wim, %g0 + bne trap_setup_user_spill ! yep we are + orn %g0, %t_twinmask, %g1 ! negate trap win mask into %g1 + + /* Trap from user, but not into the invalid window. + * Calculate new umask. The way this works is, + * any window from the %wim at trap time until + * the window right before the one we are in now, + * is a user window. A diagram: + * + * 7 6 5 4 3 2 1 0 window number + * --------------- + * I L T mnemonic + * + * Window 'I' is the invalid window in our example, + * window 'L' is the window the user was in when + * the trap occurred, window T is the trap window + * we are in now. So therefore, windows 5, 4 and + * 3 are user windows. The following sequence + * computes the user winmask to represent this. + */ + subcc %t_wim, %t_twinmask, %g2 + bneg,a 1f + sub %g2, 0x1, %g2 +1: + andn %g2, %t_twinmask, %g2 +tsetup_patch3: + and %g2, 0xff, %g2 ! patched on 7win Sparcs + st %g2, [%curptr + TI_UWINMASK] ! store new umask + + jmpl %t_retpc + 0x8, %g0 ! return to caller + mov %t_kstack, %sp ! and onto kernel stack + +trap_setup_user_spill: + /* A spill occurred from either kernel or user mode + * and there exist some user windows to deal with. + * A mask of the currently valid user windows + * is in %g1 upon entry to here. + */ + +tsetup_patch4: + and %g1, 0xff, %g1 ! patched on 7win Sparcs, mask + srl %t_wim, 0x1, %g2 ! compute new %wim +tsetup_patch5: + sll %t_wim, 0x7, %t_wim ! patched on 7win Sparcs + or %t_wim, %g2, %g2 ! %g2 is new %wim +tsetup_patch6: + and %g2, 0xff, %g2 ! patched on 7win Sparcs + andn %g1, %g2, %g1 ! clear this bit in %g1 + st %g1, [%curptr + TI_UWINMASK] + + save %g0, %g0, %g0 + + wr %g2, 0x0, %wim + + /* Call MMU-architecture dependent stack checking + * routine. + */ + b tsetup_srmmu_stackchk + andcc %sp, 0x7, %g0 + + /* Architecture specific stack checking routines. When either + * of these routines are called, the globals are free to use + * as they have been safely stashed on the new kernel stack + * pointer. Thus the definition below for simplicity. + */ +#define glob_tmp g1 + + .globl tsetup_srmmu_stackchk +tsetup_srmmu_stackchk: + /* Check results of callers andcc %sp, 0x7, %g0 */ + bne trap_setup_user_stack_is_bolixed + sethi %hi(PAGE_OFFSET), %glob_tmp + + cmp %glob_tmp, %sp + bleu,a 1f +LEON_PI( lda [%g0] ASI_LEON_MMUREGS, %glob_tmp) ! read MMU control +SUN_PI_( lda [%g0] ASI_M_MMUREGS, %glob_tmp) ! read MMU control + +trap_setup_user_stack_is_bolixed: + /* From user/kernel into invalid window w/bad user + * stack. Save bad user stack, and return to caller. + */ + SAVE_BOLIXED_USER_STACK(curptr, g3) + restore %g0, %g0, %g0 + + jmpl %t_retpc + 0x8, %g0 + mov %t_kstack, %sp + +1: + /* Clear the fault status and turn on the no_fault bit. */ + or %glob_tmp, 0x2, %glob_tmp ! or in no_fault bit +LEON_PI(sta %glob_tmp, [%g0] ASI_LEON_MMUREGS) ! set it +SUN_PI_(sta %glob_tmp, [%g0] ASI_M_MMUREGS) ! set it + + /* Dump the registers and cross fingers. */ + STORE_WINDOW(sp) + + /* Clear the no_fault bit and check the status. */ + andn %glob_tmp, 0x2, %glob_tmp +LEON_PI(sta %glob_tmp, [%g0] ASI_LEON_MMUREGS) +SUN_PI_(sta %glob_tmp, [%g0] ASI_M_MMUREGS) + + mov AC_M_SFAR, %glob_tmp +LEON_PI(lda [%glob_tmp] ASI_LEON_MMUREGS, %g0) +SUN_PI_(lda [%glob_tmp] ASI_M_MMUREGS, %g0) + + mov AC_M_SFSR, %glob_tmp +LEON_PI(lda [%glob_tmp] ASI_LEON_MMUREGS, %glob_tmp)! save away status of winstore +SUN_PI_(lda [%glob_tmp] ASI_M_MMUREGS, %glob_tmp) ! save away status of winstore + + andcc %glob_tmp, 0x2, %g0 ! did we fault? + bne trap_setup_user_stack_is_bolixed ! failure + nop + + restore %g0, %g0, %g0 + + jmpl %t_retpc + 0x8, %g0 + mov %t_kstack, %sp + -- cgit v1.2.3