From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/sparc/lib/copy_page.S | 253 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 253 insertions(+) create mode 100644 arch/sparc/lib/copy_page.S (limited to 'arch/sparc/lib/copy_page.S') diff --git a/arch/sparc/lib/copy_page.S b/arch/sparc/lib/copy_page.S new file mode 100644 index 000000000..5ebcfd479 --- /dev/null +++ b/arch/sparc/lib/copy_page.S @@ -0,0 +1,253 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* clear_page.S: UltraSparc optimized copy page. + * + * Copyright (C) 1996, 1998, 1999, 2000, 2004 David S. Miller (davem@redhat.com) + * Copyright (C) 1997 Jakub Jelinek (jakub@redhat.com) + */ + +#include +#include +#include +#include +#include +#include +#include + + /* What we used to do was lock a TLB entry into a specific + * TLB slot, clear the page with interrupts disabled, then + * restore the original TLB entry. This was great for + * disturbing the TLB as little as possible, but it meant + * we had to keep interrupts disabled for a long time. + * + * Now, we simply use the normal TLB loading mechanism, + * and this makes the cpu choose a slot all by itself. + * Then we do a normal TLB flush on exit. We need only + * disable preemption during the clear. + */ + +#define DCACHE_SIZE (PAGE_SIZE * 2) + +#if (PAGE_SHIFT == 13) +#define PAGE_SIZE_REM 0x80 +#elif (PAGE_SHIFT == 16) +#define PAGE_SIZE_REM 0x100 +#else +#error Wrong PAGE_SHIFT specified +#endif + +#define TOUCH(reg0, reg1, reg2, reg3, reg4, reg5, reg6, reg7) \ + fsrc2 %reg0, %f48; fsrc2 %reg1, %f50; \ + fsrc2 %reg2, %f52; fsrc2 %reg3, %f54; \ + fsrc2 %reg4, %f56; fsrc2 %reg5, %f58; \ + fsrc2 %reg6, %f60; fsrc2 %reg7, %f62; + + .text + + .align 32 + .globl copy_user_page + .type copy_user_page,#function + EXPORT_SYMBOL(copy_user_page) +copy_user_page: /* %o0=dest, %o1=src, %o2=vaddr */ + lduw [%g6 + TI_PRE_COUNT], %o4 + sethi %hi(PAGE_OFFSET), %g2 + sethi %hi(PAGE_SIZE), %o3 + + ldx [%g2 + %lo(PAGE_OFFSET)], %g2 + sethi %hi(PAGE_KERNEL_LOCKED), %g3 + + ldx [%g3 + %lo(PAGE_KERNEL_LOCKED)], %g3 + sub %o0, %g2, %g1 ! dest paddr + + sub %o1, %g2, %g2 ! src paddr + + and %o2, %o3, %o0 ! vaddr D-cache alias bit + or %g1, %g3, %g1 ! dest TTE data + + or %g2, %g3, %g2 ! src TTE data + sethi %hi(TLBTEMP_BASE), %o3 + + sethi %hi(DCACHE_SIZE), %o1 + add %o0, %o3, %o0 ! dest TTE vaddr + + add %o4, 1, %o2 + add %o0, %o1, %o1 ! src TTE vaddr + + /* Disable preemption. */ + mov TLB_TAG_ACCESS, %g3 + stw %o2, [%g6 + TI_PRE_COUNT] + + /* Load TLB entries. */ + rdpr %pstate, %o2 + wrpr %o2, PSTATE_IE, %pstate + stxa %o0, [%g3] ASI_DMMU + stxa %g1, [%g0] ASI_DTLB_DATA_IN + membar #Sync + stxa %o1, [%g3] ASI_DMMU + stxa %g2, [%g0] ASI_DTLB_DATA_IN + membar #Sync + wrpr %o2, 0x0, %pstate + +cheetah_copy_page_insn: + ba,pt %xcc, 9f + nop + +1: + VISEntryHalf + membar #StoreLoad | #StoreStore | #LoadStore + sethi %hi((PAGE_SIZE/64)-2), %o2 + mov %o0, %g1 + prefetch [%o1 + 0x000], #one_read + or %o2, %lo((PAGE_SIZE/64)-2), %o2 + prefetch [%o1 + 0x040], #one_read + prefetch [%o1 + 0x080], #one_read + prefetch [%o1 + 0x0c0], #one_read + ldd [%o1 + 0x000], %f0 + prefetch [%o1 + 0x100], #one_read + ldd [%o1 + 0x008], %f2 + prefetch [%o1 + 0x140], #one_read + ldd [%o1 + 0x010], %f4 + prefetch [%o1 + 0x180], #one_read + fsrc2 %f0, %f16 + ldd [%o1 + 0x018], %f6 + fsrc2 %f2, %f18 + ldd [%o1 + 0x020], %f8 + fsrc2 %f4, %f20 + ldd [%o1 + 0x028], %f10 + fsrc2 %f6, %f22 + ldd [%o1 + 0x030], %f12 + fsrc2 %f8, %f24 + ldd [%o1 + 0x038], %f14 + fsrc2 %f10, %f26 + ldd [%o1 + 0x040], %f0 +1: ldd [%o1 + 0x048], %f2 + fsrc2 %f12, %f28 + ldd [%o1 + 0x050], %f4 + fsrc2 %f14, %f30 + stda %f16, [%o0] ASI_BLK_P + ldd [%o1 + 0x058], %f6 + fsrc2 %f0, %f16 + ldd [%o1 + 0x060], %f8 + fsrc2 %f2, %f18 + ldd [%o1 + 0x068], %f10 + fsrc2 %f4, %f20 + ldd [%o1 + 0x070], %f12 + fsrc2 %f6, %f22 + ldd [%o1 + 0x078], %f14 + fsrc2 %f8, %f24 + ldd [%o1 + 0x080], %f0 + prefetch [%o1 + 0x180], #one_read + fsrc2 %f10, %f26 + subcc %o2, 1, %o2 + add %o0, 0x40, %o0 + bne,pt %xcc, 1b + add %o1, 0x40, %o1 + + ldd [%o1 + 0x048], %f2 + fsrc2 %f12, %f28 + ldd [%o1 + 0x050], %f4 + fsrc2 %f14, %f30 + stda %f16, [%o0] ASI_BLK_P + ldd [%o1 + 0x058], %f6 + fsrc2 %f0, %f16 + ldd [%o1 + 0x060], %f8 + fsrc2 %f2, %f18 + ldd [%o1 + 0x068], %f10 + fsrc2 %f4, %f20 + ldd [%o1 + 0x070], %f12 + fsrc2 %f6, %f22 + add %o0, 0x40, %o0 + ldd [%o1 + 0x078], %f14 + fsrc2 %f8, %f24 + fsrc2 %f10, %f26 + fsrc2 %f12, %f28 + fsrc2 %f14, %f30 + stda %f16, [%o0] ASI_BLK_P + membar #Sync + VISExitHalf + ba,pt %xcc, 5f + nop + +9: + VISEntry + ldub [%g6 + TI_FAULT_CODE], %g3 + mov %o0, %g1 + cmp %g3, 0 + rd %asi, %g3 + be,a,pt %icc, 1f + wr %g0, ASI_BLK_P, %asi + wr %g0, ASI_BLK_COMMIT_P, %asi +1: ldda [%o1] ASI_BLK_P, %f0 + add %o1, 0x40, %o1 + ldda [%o1] ASI_BLK_P, %f16 + add %o1, 0x40, %o1 + sethi %hi(PAGE_SIZE), %o2 +1: TOUCH(f0, f2, f4, f6, f8, f10, f12, f14) + ldda [%o1] ASI_BLK_P, %f32 + stda %f48, [%o0] %asi + add %o1, 0x40, %o1 + sub %o2, 0x40, %o2 + add %o0, 0x40, %o0 + TOUCH(f16, f18, f20, f22, f24, f26, f28, f30) + ldda [%o1] ASI_BLK_P, %f0 + stda %f48, [%o0] %asi + add %o1, 0x40, %o1 + sub %o2, 0x40, %o2 + add %o0, 0x40, %o0 + TOUCH(f32, f34, f36, f38, f40, f42, f44, f46) + ldda [%o1] ASI_BLK_P, %f16 + stda %f48, [%o0] %asi + sub %o2, 0x40, %o2 + add %o1, 0x40, %o1 + cmp %o2, PAGE_SIZE_REM + bne,pt %xcc, 1b + add %o0, 0x40, %o0 +#if (PAGE_SHIFT == 16) + TOUCH(f0, f2, f4, f6, f8, f10, f12, f14) + ldda [%o1] ASI_BLK_P, %f32 + stda %f48, [%o0] %asi + add %o1, 0x40, %o1 + sub %o2, 0x40, %o2 + add %o0, 0x40, %o0 + TOUCH(f16, f18, f20, f22, f24, f26, f28, f30) + ldda [%o1] ASI_BLK_P, %f0 + stda %f48, [%o0] %asi + add %o1, 0x40, %o1 + sub %o2, 0x40, %o2 + add %o0, 0x40, %o0 + membar #Sync + stda %f32, [%o0] %asi + add %o0, 0x40, %o0 + stda %f0, [%o0] %asi +#else + membar #Sync + stda %f0, [%o0] %asi + add %o0, 0x40, %o0 + stda %f16, [%o0] %asi +#endif + membar #Sync + wr %g3, 0x0, %asi + VISExit + +5: + stxa %g0, [%g1] ASI_DMMU_DEMAP + membar #Sync + + sethi %hi(DCACHE_SIZE), %g2 + stxa %g0, [%g1 + %g2] ASI_DMMU_DEMAP + membar #Sync + + retl + stw %o4, [%g6 + TI_PRE_COUNT] + + .size copy_user_page, .-copy_user_page + + .globl cheetah_patch_copy_page +cheetah_patch_copy_page: + sethi %hi(0x01000000), %o1 ! NOP + sethi %hi(cheetah_copy_page_insn), %o0 + or %o0, %lo(cheetah_copy_page_insn), %o0 + stw %o1, [%o0] + membar #StoreStore + flush %o0 + retl + nop -- cgit v1.2.3