From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/sparc/vdso/Makefile | 145 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 arch/sparc/vdso/Makefile (limited to 'arch/sparc/vdso/Makefile') diff --git a/arch/sparc/vdso/Makefile b/arch/sparc/vdso/Makefile new file mode 100644 index 000000000..77d7b9032 --- /dev/null +++ b/arch/sparc/vdso/Makefile @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Building vDSO images for sparc. +# + +VDSO64-$(CONFIG_SPARC64) := y +VDSOCOMPAT-$(CONFIG_COMPAT) := y + +# files to link into the vdso +vobjs-y := vdso-note.o vclock_gettime.o + +# files to link into kernel +obj-y += vma.o + +# vDSO images to build +vdso_img-$(VDSO64-y) += 64 +vdso_img-$(VDSOCOMPAT-y) += 32 + +vobjs := $(foreach F,$(vobjs-y),$(obj)/$F) + +$(obj)/vdso.o: $(obj)/vdso.so + +targets += vdso.lds $(vobjs-y) + +# Build the vDSO image C files and link them in. +vdso_img_objs := $(vdso_img-y:%=vdso-image-%.o) +vdso_img_cfiles := $(vdso_img-y:%=vdso-image-%.c) +vdso_img_sodbg := $(vdso_img-y:%=vdso%.so.dbg) +obj-y += $(vdso_img_objs) +targets += $(vdso_img_cfiles) +targets += $(vdso_img_sodbg) $(vdso_img-y:%=vdso%.so) + +CPPFLAGS_vdso.lds += -P -C + +VDSO_LDFLAGS_vdso.lds = -m elf64_sparc -soname linux-vdso.so.1 --no-undefined \ + -z max-page-size=8192 + +$(obj)/vdso64.so.dbg: $(obj)/vdso.lds $(vobjs) FORCE + $(call if_changed,vdso) + +HOST_EXTRACFLAGS += -I$(srctree)/tools/include +hostprogs += vdso2c + +quiet_cmd_vdso2c = VDSO2C $@ + cmd_vdso2c = $(obj)/vdso2c $< $(<:%.dbg=%) $@ + +$(obj)/vdso-image-%.c: $(obj)/vdso%.so.dbg $(obj)/vdso%.so $(obj)/vdso2c FORCE + $(call if_changed,vdso2c) + +# +# Don't omit frame pointers for ease of userspace debugging, but do +# optimize sibling calls. +# +CFL := $(PROFILING) -mcmodel=medlow -fPIC -O2 -fasynchronous-unwind-tables -m64 \ + $(filter -g%,$(KBUILD_CFLAGS)) -fno-stack-protector \ + -fno-omit-frame-pointer -foptimize-sibling-calls \ + -DDISABLE_BRANCH_PROFILING -DBUILD_VDSO + +SPARC_REG_CFLAGS = -ffixed-g4 -ffixed-g5 -fcall-used-g5 -fcall-used-g7 + +$(vobjs): KBUILD_CFLAGS := $(filter-out $(RANDSTRUCT_CFLAGS) $(GCC_PLUGINS_CFLAGS) $(SPARC_REG_CFLAGS),$(KBUILD_CFLAGS)) $(CFL) + +# +# vDSO code runs in userspace and -pg doesn't help with profiling anyway. +# +CFLAGS_REMOVE_vclock_gettime.o = -pg +CFLAGS_REMOVE_vdso32/vclock_gettime.o = -pg + +$(obj)/%.so: OBJCOPYFLAGS := -S +$(obj)/%.so: $(obj)/%.so.dbg FORCE + $(call if_changed,objcopy) + +CPPFLAGS_vdso32/vdso32.lds = $(CPPFLAGS_vdso.lds) +VDSO_LDFLAGS_vdso32.lds = -m elf32_sparc -soname linux-gate.so.1 + +#This makes sure the $(obj) subdirectory exists even though vdso32/ +#is not a kbuild sub-make subdirectory +override obj-dirs = $(dir $(obj)) $(obj)/vdso32/ + +targets += vdso32/vdso32.lds +targets += vdso32/vdso-note.o +targets += vdso32/vclock_gettime.o + +KBUILD_AFLAGS_32 := $(filter-out -m64,$(KBUILD_AFLAGS)) -DBUILD_VDSO +$(obj)/vdso32.so.dbg: KBUILD_AFLAGS = $(KBUILD_AFLAGS_32) +$(obj)/vdso32.so.dbg: asflags-$(CONFIG_SPARC64) += -m32 + +KBUILD_CFLAGS_32 := $(filter-out -m64,$(KBUILD_CFLAGS)) +KBUILD_CFLAGS_32 := $(filter-out -mcmodel=medlow,$(KBUILD_CFLAGS_32)) +KBUILD_CFLAGS_32 := $(filter-out -fno-pic,$(KBUILD_CFLAGS_32)) +KBUILD_CFLAGS_32 := $(filter-out $(RANDSTRUCT_CFLAGS),$(KBUILD_CFLAGS_32)) +KBUILD_CFLAGS_32 := $(filter-out $(GCC_PLUGINS_CFLAGS),$(KBUILD_CFLAGS_32)) +KBUILD_CFLAGS_32 := $(filter-out $(SPARC_REG_CFLAGS),$(KBUILD_CFLAGS_32)) +KBUILD_CFLAGS_32 += -m32 -msoft-float -fpic +KBUILD_CFLAGS_32 += -fno-stack-protector +KBUILD_CFLAGS_32 += $(call cc-option, -foptimize-sibling-calls) +KBUILD_CFLAGS_32 += -fno-omit-frame-pointer +KBUILD_CFLAGS_32 += -DDISABLE_BRANCH_PROFILING +KBUILD_CFLAGS_32 += -mv8plus +$(obj)/vdso32.so.dbg: KBUILD_CFLAGS = $(KBUILD_CFLAGS_32) + +$(obj)/vdso32.so.dbg: FORCE \ + $(obj)/vdso32/vdso32.lds \ + $(obj)/vdso32/vclock_gettime.o \ + $(obj)/vdso32/vdso-note.o + $(call if_changed,vdso) + +# +# The DSO images are built using a special linker script. +# +quiet_cmd_vdso = VDSO $@ + cmd_vdso = $(LD) -nostdlib -o $@ \ + $(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \ + -T $(filter %.lds,$^) $(filter %.o,$^) && \ + sh $(srctree)/$(src)/checkundef.sh '$(OBJDUMP)' '$@' + +VDSO_LDFLAGS = -shared --hash-style=both --build-id=sha1 -Bsymbolic +GCOV_PROFILE := n + +# +# Install the unstripped copies of vdso*.so. If our toolchain supports +# build-id, install .build-id links as well. +# +quiet_cmd_vdso_install = INSTALL $(@:install_%=%) +define cmd_vdso_install + cp $< "$(MODLIB)/vdso/$(@:install_%=%)"; \ + if readelf -n $< |grep -q 'Build ID'; then \ + buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \ + first=`echo $$buildid | cut -b-2`; \ + last=`echo $$buildid | cut -b3-`; \ + mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \ + ln -sf "../../$(@:install_%=%)" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \ + fi +endef + +vdso_img_insttargets := $(vdso_img_sodbg:%.dbg=install_%) + +$(MODLIB)/vdso: FORCE + @mkdir -p $(MODLIB)/vdso + +$(vdso_img_insttargets): install_%: $(obj)/%.dbg $(MODLIB)/vdso FORCE + $(call cmd,vdso_install) + +PHONY += vdso_install $(vdso_img_insttargets) +vdso_install: $(vdso_img_insttargets) FORCE -- cgit v1.2.3