From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/um/drivers/port_kern.c | 303 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 303 insertions(+) create mode 100644 arch/um/drivers/port_kern.c (limited to 'arch/um/drivers/port_kern.c') diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c new file mode 100644 index 000000000..efa8b7304 --- /dev/null +++ b/arch/um/drivers/port_kern.c @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{linux.intel,addtoit}.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "port.h" + +struct port_list { + struct list_head list; + atomic_t wait_count; + int has_connection; + struct completion done; + int port; + int fd; + spinlock_t lock; + struct list_head pending; + struct list_head connections; +}; + +struct port_dev { + struct port_list *port; + int helper_pid; + int telnetd_pid; +}; + +struct connection { + struct list_head list; + int fd; + int helper_pid; + int socket[2]; + int telnetd_pid; + struct port_list *port; +}; + +static irqreturn_t pipe_interrupt(int irq, void *data) +{ + struct connection *conn = data; + int fd; + + fd = os_rcv_fd(conn->socket[0], &conn->helper_pid); + if (fd < 0) { + if (fd == -EAGAIN) + return IRQ_NONE; + + printk(KERN_ERR "pipe_interrupt : os_rcv_fd returned %d\n", + -fd); + os_close_file(conn->fd); + } + + list_del(&conn->list); + + conn->fd = fd; + list_add(&conn->list, &conn->port->connections); + + complete(&conn->port->done); + return IRQ_HANDLED; +} + +#define NO_WAITER_MSG \ + "****\n" \ + "There are currently no UML consoles waiting for port connections.\n" \ + "Either disconnect from one to make it available or activate some more\n" \ + "by enabling more consoles in the UML /etc/inittab.\n" \ + "****\n" + +static int port_accept(struct port_list *port) +{ + struct connection *conn; + int fd, socket[2], pid; + + fd = port_connection(port->fd, socket, &pid); + if (fd < 0) { + if (fd != -EAGAIN) + printk(KERN_ERR "port_accept : port_connection " + "returned %d\n", -fd); + goto out; + } + + conn = kmalloc(sizeof(*conn), GFP_ATOMIC); + if (conn == NULL) { + printk(KERN_ERR "port_accept : failed to allocate " + "connection\n"); + goto out_close; + } + *conn = ((struct connection) + { .list = LIST_HEAD_INIT(conn->list), + .fd = fd, + .socket = { socket[0], socket[1] }, + .telnetd_pid = pid, + .port = port }); + + if (um_request_irq(TELNETD_IRQ, socket[0], IRQ_READ, pipe_interrupt, + IRQF_SHARED, "telnetd", conn) < 0) { + printk(KERN_ERR "port_accept : failed to get IRQ for " + "telnetd\n"); + goto out_free; + } + + if (atomic_read(&port->wait_count) == 0) { + os_write_file(fd, NO_WAITER_MSG, sizeof(NO_WAITER_MSG)); + printk(KERN_ERR "No one waiting for port\n"); + } + list_add(&conn->list, &port->pending); + return 1; + + out_free: + kfree(conn); + out_close: + os_close_file(fd); + os_kill_process(pid, 1); + out: + return 0; +} + +static DEFINE_MUTEX(ports_mutex); +static LIST_HEAD(ports); + +static void port_work_proc(struct work_struct *unused) +{ + struct port_list *port; + struct list_head *ele; + unsigned long flags; + + local_irq_save(flags); + list_for_each(ele, &ports) { + port = list_entry(ele, struct port_list, list); + if (!port->has_connection) + continue; + + while (port_accept(port)) + ; + port->has_connection = 0; + } + local_irq_restore(flags); +} + +DECLARE_WORK(port_work, port_work_proc); + +static irqreturn_t port_interrupt(int irq, void *data) +{ + struct port_list *port = data; + + port->has_connection = 1; + schedule_work(&port_work); + return IRQ_HANDLED; +} + +void *port_data(int port_num) +{ + struct list_head *ele; + struct port_list *port; + struct port_dev *dev = NULL; + int fd; + + mutex_lock(&ports_mutex); + list_for_each(ele, &ports) { + port = list_entry(ele, struct port_list, list); + if (port->port == port_num) + goto found; + } + port = kmalloc(sizeof(struct port_list), GFP_KERNEL); + if (port == NULL) { + printk(KERN_ERR "Allocation of port list failed\n"); + goto out; + } + + fd = port_listen_fd(port_num); + if (fd < 0) { + printk(KERN_ERR "binding to port %d failed, errno = %d\n", + port_num, -fd); + goto out_free; + } + + if (um_request_irq(ACCEPT_IRQ, fd, IRQ_READ, port_interrupt, + IRQF_SHARED, "port", port) < 0) { + printk(KERN_ERR "Failed to get IRQ for port %d\n", port_num); + goto out_close; + } + + *port = ((struct port_list) + { .list = LIST_HEAD_INIT(port->list), + .wait_count = ATOMIC_INIT(0), + .has_connection = 0, + .port = port_num, + .fd = fd, + .pending = LIST_HEAD_INIT(port->pending), + .connections = LIST_HEAD_INIT(port->connections) }); + spin_lock_init(&port->lock); + init_completion(&port->done); + list_add(&port->list, &ports); + + found: + dev = kmalloc(sizeof(struct port_dev), GFP_KERNEL); + if (dev == NULL) { + printk(KERN_ERR "Allocation of port device entry failed\n"); + goto out; + } + + *dev = ((struct port_dev) { .port = port, + .helper_pid = -1, + .telnetd_pid = -1 }); + goto out; + + out_close: + os_close_file(fd); + out_free: + kfree(port); + out: + mutex_unlock(&ports_mutex); + return dev; +} + +int port_wait(void *data) +{ + struct port_dev *dev = data; + struct connection *conn; + struct port_list *port = dev->port; + int fd; + + atomic_inc(&port->wait_count); + while (1) { + fd = -ERESTARTSYS; + if (wait_for_completion_interruptible(&port->done)) + goto out; + + spin_lock(&port->lock); + + conn = list_entry(port->connections.next, struct connection, + list); + list_del(&conn->list); + spin_unlock(&port->lock); + + os_shutdown_socket(conn->socket[0], 1, 1); + os_close_file(conn->socket[0]); + os_shutdown_socket(conn->socket[1], 1, 1); + os_close_file(conn->socket[1]); + + /* This is done here because freeing an IRQ can't be done + * within the IRQ handler. So, pipe_interrupt always ups + * the semaphore regardless of whether it got a successful + * connection. Then we loop here throwing out failed + * connections until a good one is found. + */ + um_free_irq(TELNETD_IRQ, conn); + + if (conn->fd >= 0) + break; + os_close_file(conn->fd); + kfree(conn); + } + + fd = conn->fd; + dev->helper_pid = conn->helper_pid; + dev->telnetd_pid = conn->telnetd_pid; + kfree(conn); + out: + atomic_dec(&port->wait_count); + return fd; +} + +void port_remove_dev(void *d) +{ + struct port_dev *dev = d; + + if (dev->helper_pid != -1) + os_kill_process(dev->helper_pid, 0); + if (dev->telnetd_pid != -1) + os_kill_process(dev->telnetd_pid, 1); + dev->helper_pid = -1; + dev->telnetd_pid = -1; +} + +void port_kern_free(void *d) +{ + struct port_dev *dev = d; + + port_remove_dev(dev); + kfree(dev); +} + +static void free_port(void) +{ + struct list_head *ele; + struct port_list *port; + + list_for_each(ele, &ports) { + port = list_entry(ele, struct port_list, list); + free_irq_by_fd(port->fd); + os_close_file(port->fd); + } +} + +__uml_exitcall(free_port); -- cgit v1.2.3