From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/um/drivers/umcast_kern.c | 188 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 188 insertions(+) create mode 100644 arch/um/drivers/umcast_kern.c (limited to 'arch/um/drivers/umcast_kern.c') diff --git a/arch/um/drivers/umcast_kern.c b/arch/um/drivers/umcast_kern.c new file mode 100644 index 000000000..595a54f2b --- /dev/null +++ b/arch/um/drivers/umcast_kern.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * user-mode-linux networking multicast transport + * Copyright (C) 2001 by Harald Welte + * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) + * + * based on the existing uml-networking code, which is + * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and + * James Leu (jleu@mindspring.net). + * Copyright (C) 2001 by various other people who didn't put their name here. + * + */ + +#include +#include +#include "umcast.h" +#include + +struct umcast_init { + char *addr; + int lport; + int rport; + int ttl; + bool unicast; +}; + +static void umcast_init(struct net_device *dev, void *data) +{ + struct uml_net_private *pri; + struct umcast_data *dpri; + struct umcast_init *init = data; + + pri = netdev_priv(dev); + dpri = (struct umcast_data *) pri->user; + dpri->addr = init->addr; + dpri->lport = init->lport; + dpri->rport = init->rport; + dpri->unicast = init->unicast; + dpri->ttl = init->ttl; + dpri->dev = dev; + + if (dpri->unicast) { + printk(KERN_INFO "ucast backend address: %s:%u listen port: " + "%u\n", dpri->addr, dpri->rport, dpri->lport); + } else { + printk(KERN_INFO "mcast backend multicast address: %s:%u, " + "TTL:%u\n", dpri->addr, dpri->lport, dpri->ttl); + } +} + +static int umcast_read(int fd, struct sk_buff *skb, struct uml_net_private *lp) +{ + return net_recvfrom(fd, skb_mac_header(skb), + skb->dev->mtu + ETH_HEADER_OTHER); +} + +static int umcast_write(int fd, struct sk_buff *skb, struct uml_net_private *lp) +{ + return umcast_user_write(fd, skb->data, skb->len, + (struct umcast_data *) &lp->user); +} + +static const struct net_kern_info umcast_kern_info = { + .init = umcast_init, + .protocol = eth_protocol, + .read = umcast_read, + .write = umcast_write, +}; + +static int mcast_setup(char *str, char **mac_out, void *data) +{ + struct umcast_init *init = data; + char *port_str = NULL, *ttl_str = NULL, *remain; + char *last; + + *init = ((struct umcast_init) + { .addr = "239.192.168.1", + .lport = 1102, + .ttl = 1 }); + + remain = split_if_spec(str, mac_out, &init->addr, &port_str, &ttl_str, + NULL); + if (remain != NULL) { + printk(KERN_ERR "mcast_setup - Extra garbage on " + "specification : '%s'\n", remain); + return 0; + } + + if (port_str != NULL) { + init->lport = simple_strtoul(port_str, &last, 10); + if ((*last != '\0') || (last == port_str)) { + printk(KERN_ERR "mcast_setup - Bad port : '%s'\n", + port_str); + return 0; + } + } + + if (ttl_str != NULL) { + init->ttl = simple_strtoul(ttl_str, &last, 10); + if ((*last != '\0') || (last == ttl_str)) { + printk(KERN_ERR "mcast_setup - Bad ttl : '%s'\n", + ttl_str); + return 0; + } + } + + init->unicast = false; + init->rport = init->lport; + + printk(KERN_INFO "Configured mcast device: %s:%u-%u\n", init->addr, + init->lport, init->ttl); + + return 1; +} + +static int ucast_setup(char *str, char **mac_out, void *data) +{ + struct umcast_init *init = data; + char *lport_str = NULL, *rport_str = NULL, *remain; + char *last; + + *init = ((struct umcast_init) + { .addr = "", + .lport = 1102, + .rport = 1102 }); + + remain = split_if_spec(str, mac_out, &init->addr, + &lport_str, &rport_str, NULL); + if (remain != NULL) { + printk(KERN_ERR "ucast_setup - Extra garbage on " + "specification : '%s'\n", remain); + return 0; + } + + if (lport_str != NULL) { + init->lport = simple_strtoul(lport_str, &last, 10); + if ((*last != '\0') || (last == lport_str)) { + printk(KERN_ERR "ucast_setup - Bad listen port : " + "'%s'\n", lport_str); + return 0; + } + } + + if (rport_str != NULL) { + init->rport = simple_strtoul(rport_str, &last, 10); + if ((*last != '\0') || (last == rport_str)) { + printk(KERN_ERR "ucast_setup - Bad remote port : " + "'%s'\n", rport_str); + return 0; + } + } + + init->unicast = true; + + printk(KERN_INFO "Configured ucast device: :%u -> %s:%u\n", + init->lport, init->addr, init->rport); + + return 1; +} + +static struct transport mcast_transport = { + .list = LIST_HEAD_INIT(mcast_transport.list), + .name = "mcast", + .setup = mcast_setup, + .user = &umcast_user_info, + .kern = &umcast_kern_info, + .private_size = sizeof(struct umcast_data), + .setup_size = sizeof(struct umcast_init), +}; + +static struct transport ucast_transport = { + .list = LIST_HEAD_INIT(ucast_transport.list), + .name = "ucast", + .setup = ucast_setup, + .user = &umcast_user_info, + .kern = &umcast_kern_info, + .private_size = sizeof(struct umcast_data), + .setup_size = sizeof(struct umcast_init), +}; + +static int register_umcast(void) +{ + register_transport(&mcast_transport); + register_transport(&ucast_transport); + return 0; +} + +late_initcall(register_umcast); -- cgit v1.2.3