From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/um/drivers/xterm.c | 229 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 229 insertions(+) create mode 100644 arch/um/drivers/xterm.c (limited to 'arch/um/drivers/xterm.c') diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c new file mode 100644 index 000000000..6918de5e2 --- /dev/null +++ b/arch/um/drivers/xterm.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include "chan_user.h" +#include +#include +#include "xterm.h" + +struct xterm_chan { + int pid; + int helper_pid; + int chan_fd; + char *title; + int device; + int raw; + struct termios tt; +}; + +static void *xterm_init(char *str, int device, const struct chan_opts *opts) +{ + struct xterm_chan *data; + + data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL); + if (data == NULL) + return NULL; + *data = ((struct xterm_chan) { .pid = -1, + .helper_pid = -1, + .chan_fd = -1, + .device = device, + .title = opts->xterm_title, + .raw = opts->raw } ); + return data; +} + +/* Only changed by xterm_setup, which is a setup */ +static char *terminal_emulator = CONFIG_XTERM_CHAN_DEFAULT_EMULATOR; +static char *title_switch = "-T"; +static char *exec_switch = "-e"; + +static int __init xterm_setup(char *line, int *add) +{ + *add = 0; + terminal_emulator = line; + + line = strchr(line, ','); + if (line == NULL) + return 0; + + *line++ = '\0'; + if (*line) + title_switch = line; + + line = strchr(line, ','); + if (line == NULL) + return 0; + + *line++ = '\0'; + if (*line) + exec_switch = line; + + return 0; +} + +__uml_setup("xterm=", xterm_setup, +"xterm=,,<exec switch>\n" +" Specifies an alternate terminal emulator to use for the debugger,\n" +" consoles, and serial lines when they are attached to the xterm channel.\n" +" The values are the terminal emulator binary, the switch it uses to set\n" +" its title, and the switch it uses to execute a subprocess,\n" +" respectively. The title switch must have the form '<switch> title',\n" +" not '<switch>=title'. Similarly, the exec switch must have the form\n" +" '<switch> command arg1 arg2 ...'.\n" +" The default values are 'xterm=" CONFIG_XTERM_CHAN_DEFAULT_EMULATOR + ",-T,-e'.\n" +" Values for gnome-terminal are 'xterm=gnome-terminal,-t,-x'.\n\n" +); + +static int xterm_open(int input, int output, int primary, void *d, + char **dev_out) +{ + struct xterm_chan *data = d; + int pid, fd, new, err; + char title[256], file[] = "/tmp/xterm-pipeXXXXXX"; + char *argv[] = { terminal_emulator, title_switch, title, exec_switch, + OS_LIB_PATH "/uml/port-helper", "-uml-socket", + file, NULL }; + + if (access(argv[4], X_OK) < 0) + argv[4] = "port-helper"; + + /* + * Check that DISPLAY is set, this doesn't guarantee the xterm + * will work but w/o it we can be pretty sure it won't. + */ + if (getenv("DISPLAY") == NULL) { + printk(UM_KERN_ERR "xterm_open: $DISPLAY not set.\n"); + return -ENODEV; + } + + /* + * This business of getting a descriptor to a temp file, + * deleting the file and closing the descriptor is just to get + * a known-unused name for the Unix socket that we really + * want. + */ + fd = mkstemp(file); + if (fd < 0) { + err = -errno; + printk(UM_KERN_ERR "xterm_open : mkstemp failed, errno = %d\n", + errno); + return err; + } + + if (unlink(file)) { + err = -errno; + printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n", + errno); + close(fd); + return err; + } + close(fd); + + fd = os_create_unix_socket(file, sizeof(file), 1); + if (fd < 0) { + printk(UM_KERN_ERR "xterm_open : create_unix_socket failed, " + "errno = %d\n", -fd); + return fd; + } + + sprintf(title, data->title, data->device); + pid = run_helper(NULL, NULL, argv); + if (pid < 0) { + err = pid; + printk(UM_KERN_ERR "xterm_open : run_helper failed, " + "errno = %d\n", -err); + goto out_close1; + } + + err = os_set_fd_block(fd, 0); + if (err < 0) { + printk(UM_KERN_ERR "xterm_open : failed to set descriptor " + "non-blocking, err = %d\n", -err); + goto out_kill; + } + + data->chan_fd = fd; + new = xterm_fd(fd, &data->helper_pid); + if (new < 0) { + err = new; + printk(UM_KERN_ERR "xterm_open : os_rcv_fd failed, err = %d\n", + -err); + goto out_kill; + } + + err = os_set_fd_block(new, 0); + if (err) { + printk(UM_KERN_ERR "xterm_open : failed to set xterm " + "descriptor non-blocking, err = %d\n", -err); + goto out_close2; + } + + CATCH_EINTR(err = tcgetattr(new, &data->tt)); + if (err) { + new = err; + goto out_close2; + } + + if (data->raw) { + err = raw(new); + if (err) { + new = err; + goto out_close2; + } + } + + unlink(file); + data->pid = pid; + *dev_out = NULL; + + return new; + + out_close2: + close(new); + out_kill: + os_kill_process(pid, 1); + out_close1: + close(fd); + + return err; +} + +static void xterm_close(int fd, void *d) +{ + struct xterm_chan *data = d; + + if (data->pid != -1) + os_kill_process(data->pid, 1); + data->pid = -1; + + if (data->helper_pid != -1) + os_kill_process(data->helper_pid, 0); + data->helper_pid = -1; + + if (data->chan_fd != -1) + os_close_file(data->chan_fd); + os_close_file(fd); +} + +const struct chan_ops xterm_ops = { + .type = "xterm", + .init = xterm_init, + .open = xterm_open, + .close = xterm_close, + .read = generic_read, + .write = generic_write, + .console_write = generic_console_write, + .window_size = generic_window_size, + .free = generic_free, + .winch = 1, +}; -- cgit v1.2.3