From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/um/os-Linux/main.c | 254 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 254 insertions(+) create mode 100644 arch/um/os-Linux/main.c (limited to 'arch/um/os-Linux/main.c') diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c new file mode 100644 index 000000000..c8a42ecbd --- /dev/null +++ b/arch/um/os-Linux/main.c @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) + * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PGD_BOUND (4 * 1024 * 1024) +#define STACKSIZE (8 * 1024 * 1024) +#define THREAD_NAME_LEN (256) + +long elf_aux_hwcap; + +static void set_stklim(void) +{ + struct rlimit lim; + + if (getrlimit(RLIMIT_STACK, &lim) < 0) { + perror("getrlimit"); + exit(1); + } + if ((lim.rlim_cur == RLIM_INFINITY) || (lim.rlim_cur > STACKSIZE)) { + lim.rlim_cur = STACKSIZE; + if (setrlimit(RLIMIT_STACK, &lim) < 0) { + perror("setrlimit"); + exit(1); + } + } +} + +static void last_ditch_exit(int sig) +{ + uml_cleanup(); + exit(1); +} + +static void install_fatal_handler(int sig) +{ + struct sigaction action; + + /* All signals are enabled in this handler ... */ + sigemptyset(&action.sa_mask); + + /* + * ... including the signal being handled, plus we want the + * handler reset to the default behavior, so that if an exit + * handler is hanging for some reason, the UML will just die + * after this signal is sent a second time. + */ + action.sa_flags = SA_RESETHAND | SA_NODEFER; + action.sa_restorer = NULL; + action.sa_handler = last_ditch_exit; + if (sigaction(sig, &action, NULL) < 0) { + os_warn("failed to install handler for signal %d " + "- errno = %d\n", sig, errno); + exit(1); + } +} + +#define UML_LIB_PATH ":" OS_LIB_PATH "/uml" + +static void setup_env_path(void) +{ + char *new_path = NULL; + char *old_path = NULL; + int path_len = 0; + + old_path = getenv("PATH"); + /* + * if no PATH variable is set or it has an empty value + * just use the default + /usr/lib/uml + */ + if (!old_path || (path_len = strlen(old_path)) == 0) { + if (putenv("PATH=:/bin:/usr/bin/" UML_LIB_PATH)) + perror("couldn't putenv"); + return; + } + + /* append /usr/lib/uml to the existing path */ + path_len += strlen("PATH=" UML_LIB_PATH) + 1; + new_path = malloc(path_len); + if (!new_path) { + perror("couldn't malloc to set a new PATH"); + return; + } + snprintf(new_path, path_len, "PATH=%s" UML_LIB_PATH, old_path); + if (putenv(new_path)) { + perror("couldn't putenv to set a new PATH"); + free(new_path); + } +} + +extern void scan_elf_aux( char **envp); + +int __init main(int argc, char **argv, char **envp) +{ + char **new_argv; + int ret, i, err; + + set_stklim(); + + setup_env_path(); + + setsid(); + + new_argv = malloc((argc + 1) * sizeof(char *)); + if (new_argv == NULL) { + perror("Mallocing argv"); + exit(1); + } + for (i = 0; i < argc; i++) { + new_argv[i] = strdup(argv[i]); + if (new_argv[i] == NULL) { + perror("Mallocing an arg"); + exit(1); + } + } + new_argv[argc] = NULL; + + /* + * Allow these signals to bring down a UML if all other + * methods of control fail. + */ + install_fatal_handler(SIGINT); + install_fatal_handler(SIGTERM); + +#ifdef CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA + scan_elf_aux(envp); +#endif + + change_sig(SIGPIPE, 0); + ret = linux_main(argc, argv); + + /* + * Disable SIGPROF - I have no idea why libc doesn't do this or turn + * off the profiling time, but UML dies with a SIGPROF just before + * exiting when profiling is active. + */ + change_sig(SIGPROF, 0); + + /* + * This signal stuff used to be in the reboot case. However, + * sometimes a timer signal can come in when we're halting (reproducably + * when writing out gcov information, presumably because that takes + * some time) and cause a segfault. + */ + + /* stop timers and set timer signal to be ignored */ + os_timer_disable(); + + /* disable SIGIO for the fds and set SIGIO to be ignored */ + err = deactivate_all_fds(); + if (err) + os_warn("deactivate_all_fds failed, errno = %d\n", -err); + + /* + * Let any pending signals fire now. This ensures + * that they won't be delivered after the exec, when + * they are definitely not expected. + */ + unblock_signals(); + + os_info("\n"); + /* Reboot */ + if (ret) { + execvp(new_argv[0], new_argv); + perror("Failed to exec kernel"); + ret = 1; + } + return uml_exitcode; +} + +extern void *__real_malloc(int); + +void *__wrap_malloc(int size) +{ + void *ret; + + if (!kmalloc_ok) + return __real_malloc(size); + else if (size <= UM_KERN_PAGE_SIZE) + /* finding contiguous pages can be hard*/ + ret = uml_kmalloc(size, UM_GFP_KERNEL); + else ret = vmalloc(size); + + /* + * glibc people insist that if malloc fails, errno should be + * set by malloc as well. So we do. + */ + if (ret == NULL) + errno = ENOMEM; + + return ret; +} + +void *__wrap_calloc(int n, int size) +{ + void *ptr = __wrap_malloc(n * size); + + if (ptr == NULL) + return NULL; + memset(ptr, 0, n * size); + return ptr; +} + +extern void __real_free(void *); + +extern unsigned long high_physmem; + +void __wrap_free(void *ptr) +{ + unsigned long addr = (unsigned long) ptr; + + /* + * We need to know how the allocation happened, so it can be correctly + * freed. This is done by seeing what region of memory the pointer is + * in - + * physical memory - kmalloc/kfree + * kernel virtual memory - vmalloc/vfree + * anywhere else - malloc/free + * If kmalloc is not yet possible, then either high_physmem and/or + * end_vm are still 0 (as at startup), in which case we call free, or + * we have set them, but anyway addr has not been allocated from those + * areas. So, in both cases __real_free is called. + * + * CAN_KMALLOC is checked because it would be bad to free a buffer + * with kmalloc/vmalloc after they have been turned off during + * shutdown. + * XXX: However, we sometimes shutdown CAN_KMALLOC temporarily, so + * there is a possibility for memory leaks. + */ + + if ((addr >= uml_physmem) && (addr < high_physmem)) { + if (kmalloc_ok) + kfree(ptr); + } + else if ((addr >= start_vm) && (addr < end_vm)) { + if (kmalloc_ok) + vfree(ptr); + } + else __real_free(ptr); +} -- cgit v1.2.3