From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/boot/Makefile | 159 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 159 insertions(+) create mode 100644 arch/x86/boot/Makefile (limited to 'arch/x86/boot/Makefile') diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile new file mode 100644 index 000000000..9e38ffaad --- /dev/null +++ b/arch/x86/boot/Makefile @@ -0,0 +1,159 @@ +# +# arch/x86/boot/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1994 by Linus Torvalds +# Changed by many, many contributors over the years. +# + +# Sanitizer runtimes are unavailable and cannot be linked for early boot code. +KASAN_SANITIZE := n +KCSAN_SANITIZE := n +KMSAN_SANITIZE := n +OBJECT_FILES_NON_STANDARD := y + +# Kernel does not boot with kcov instrumentation here. +# One of the problems observed was insertion of __sanitizer_cov_trace_pc() +# callback into middle of per-cpu data enabling code. Thus the callback observed +# inconsistent state and crashed. We are interested mostly in syscall coverage, +# so boot code is not interesting anyway. +KCOV_INSTRUMENT := n + +# If you want to preset the SVGA mode, uncomment the next line and +# set SVGA_MODE to whatever number you want. +# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode. +# The number is the same as you would ordinarily press at bootup. + +SVGA_MODE := -DSVGA_MODE=NORMAL_VGA + +targets := vmlinux.bin setup.bin setup.elf bzImage +targets += fdimage fdimage144 fdimage288 image.iso hdimage +subdir- := compressed + +setup-y += a20.o bioscall.o cmdline.o copy.o cpu.o cpuflags.o cpucheck.o +setup-y += early_serial_console.o edd.o header.o main.o memory.o +setup-y += pm.o pmjump.o printf.o regs.o string.o tty.o video.o +setup-y += video-mode.o version.o +setup-$(CONFIG_X86_APM_BOOT) += apm.o + +# The link order of the video-*.o modules can matter. In particular, +# video-vga.o *must* be listed first, followed by video-vesa.o. +# Hardware-specific drivers should follow in the order they should be +# probed, and video-bios.o should typically be last. +setup-y += video-vga.o +setup-y += video-vesa.o +setup-y += video-bios.o + +targets += $(setup-y) +hostprogs := tools/build +hostprogs += mkcpustr + +HOST_EXTRACFLAGS += -I$(srctree)/tools/include \ + -include include/generated/autoconf.h \ + -D__EXPORTED_HEADERS__ + +ifdef CONFIG_X86_FEATURE_NAMES +$(obj)/cpu.o: $(obj)/cpustr.h + +quiet_cmd_cpustr = CPUSTR $@ + cmd_cpustr = $(obj)/mkcpustr > $@ +$(obj)/cpustr.h: $(obj)/mkcpustr FORCE + $(call if_changed,cpustr) +endif +targets += cpustr.h + +# --------------------------------------------------------------------------- + +KBUILD_CFLAGS := $(REALMODE_CFLAGS) -D_SETUP +KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ +KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=) +KBUILD_CFLAGS += -fno-asynchronous-unwind-tables +GCOV_PROFILE := n +UBSAN_SANITIZE := n + +$(obj)/bzImage: asflags-y := $(SVGA_MODE) + +quiet_cmd_image = BUILD $@ +silent_redirect_image = >/dev/null +cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \ + $(obj)/zoffset.h $@ $($(quiet)redirect_image) + +$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE + $(call if_changed,image) + @$(kecho) 'Kernel: $@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')' + +OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S +$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE + $(call if_changed,objcopy) + +SETUP_OBJS = $(addprefix $(obj)/,$(setup-y)) + +sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [a-zA-Z] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|efi32_pe_entry\|input_data\|kernel_info\|_end\|_ehead\|_text\|z_.*\)$$/\#define ZO_\2 0x\1/p' + +quiet_cmd_zoffset = ZOFFSET $@ + cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@ + +targets += zoffset.h +$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE + $(call if_changed,zoffset) + + +AFLAGS_header.o += -I$(objtree)/$(obj) +$(obj)/header.o: $(obj)/zoffset.h + +LDFLAGS_setup.elf := -m elf_i386 -z noexecstack -T +$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE + $(call if_changed,ld) + +OBJCOPYFLAGS_setup.bin := -O binary +$(obj)/setup.bin: $(obj)/setup.elf FORCE + $(call if_changed,objcopy) + +$(obj)/compressed/vmlinux: FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed $@ + +# Set this if you want to pass append arguments to the +# bzdisk/fdimage/hdimage/isoimage kernel +FDARGS = +# Set this if you want one or more initrds included in the image +FDINITRD = + +imgdeps = $(obj)/bzImage $(obj)/mtools.conf $(src)/genimage.sh + +$(obj)/mtools.conf: $(src)/mtools.conf.in + sed -e 's|@OBJ@|$(obj)|g' < $< > $@ + +targets += mtools.conf + +# genimage.sh requires bash, but it also has a bunch of other +# external dependencies. +quiet_cmd_genimage = GENIMAGE $3 +cmd_genimage = $(BASH) $(srctree)/$(src)/genimage.sh $2 $3 $(obj)/bzImage \ + $(obj)/mtools.conf '$(FDARGS)' $(FDINITRD) + +PHONY += bzdisk fdimage fdimage144 fdimage288 hdimage isoimage + +# This requires write access to /dev/fd0 +# All images require syslinux to be installed; hdimage also requires +# EDK2/OVMF if the kernel is compiled with the EFI stub. +bzdisk: $(imgdeps) + $(call cmd,genimage,bzdisk,/dev/fd0) + +fdimage fdimage144: $(imgdeps) + $(call cmd,genimage,fdimage144,$(obj)/fdimage) + @$(kecho) 'Kernel: $(obj)/fdimage is ready' + +fdimage288: $(imgdeps) + $(call cmd,genimage,fdimage288,$(obj)/fdimage) + @$(kecho) 'Kernel: $(obj)/fdimage is ready' + +hdimage: $(imgdeps) + $(call cmd,genimage,hdimage,$(obj)/hdimage) + @$(kecho) 'Kernel: $(obj)/hdimage is ready' + +isoimage: $(imgdeps) + $(call cmd,genimage,isoimage,$(obj)/image.iso) + @$(kecho) 'Kernel: $(obj)/image.iso is ready' -- cgit v1.2.3