From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/boot/compressed/efi_mixed.S | 345 +++++++++++++++++++++++++++++++++++ 1 file changed, 345 insertions(+) create mode 100644 arch/x86/boot/compressed/efi_mixed.S (limited to 'arch/x86/boot/compressed/efi_mixed.S') diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S new file mode 100644 index 000000000..4ca70bf93 --- /dev/null +++ b/arch/x86/boot/compressed/efi_mixed.S @@ -0,0 +1,345 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming + * + * Early support for invoking 32-bit EFI services from a 64-bit kernel. + * + * Because this thunking occurs before ExitBootServices() we have to + * restore the firmware's 32-bit GDT and IDT before we make EFI service + * calls. + * + * On the plus side, we don't have to worry about mangling 64-bit + * addresses into 32-bits because we're executing with an identity + * mapped pagetable and haven't transitioned to 64-bit virtual addresses + * yet. + */ + +#include +#include +#include +#include +#include + + .code64 + .text +/* + * When booting in 64-bit mode on 32-bit EFI firmware, startup_64_mixed_mode() + * is the first thing that runs after switching to long mode. Depending on + * whether the EFI handover protocol or the compat entry point was used to + * enter the kernel, it will either branch to the 64-bit EFI handover + * entrypoint at offset 0x390 in the image, or to the 64-bit EFI PE/COFF + * entrypoint efi_pe_entry(). In the former case, the bootloader must provide a + * struct bootparams pointer as the third argument, so the presence of such a + * pointer is used to disambiguate. + * + * +--------------+ + * +------------------+ +------------+ +------>| efi_pe_entry | + * | efi32_pe_entry |---->| | | +-----------+--+ + * +------------------+ | | +------+----------------+ | + * | startup_32 |---->| startup_64_mixed_mode | | + * +------------------+ | | +------+----------------+ V + * | efi32_stub_entry |---->| | | +------------------+ + * +------------------+ +------------+ +---->| efi64_stub_entry | + * +-------------+----+ + * +------------+ +----------+ | + * | startup_64 |<----| efi_main |<--------------+ + * +------------+ +----------+ + */ +SYM_FUNC_START(startup_64_mixed_mode) + lea efi32_boot_args(%rip), %rdx + mov 0(%rdx), %edi + mov 4(%rdx), %esi + mov 8(%rdx), %edx // saved bootparams pointer + test %edx, %edx + jnz efi64_stub_entry + /* + * efi_pe_entry uses MS calling convention, which requires 32 bytes of + * shadow space on the stack even if all arguments are passed in + * registers. We also need an additional 8 bytes for the space that + * would be occupied by the return address, and this also results in + * the correct stack alignment for entry. + */ + sub $40, %rsp + mov %rdi, %rcx // MS calling convention + mov %rsi, %rdx + jmp efi_pe_entry +SYM_FUNC_END(startup_64_mixed_mode) + +SYM_FUNC_START(__efi64_thunk) + push %rbp + push %rbx + + movl %ds, %eax + push %rax + movl %es, %eax + push %rax + movl %ss, %eax + push %rax + + /* Copy args passed on stack */ + movq 0x30(%rsp), %rbp + movq 0x38(%rsp), %rbx + movq 0x40(%rsp), %rax + + /* + * Convert x86-64 ABI params to i386 ABI + */ + subq $64, %rsp + movl %esi, 0x0(%rsp) + movl %edx, 0x4(%rsp) + movl %ecx, 0x8(%rsp) + movl %r8d, 0xc(%rsp) + movl %r9d, 0x10(%rsp) + movl %ebp, 0x14(%rsp) + movl %ebx, 0x18(%rsp) + movl %eax, 0x1c(%rsp) + + leaq 0x20(%rsp), %rbx + sgdt (%rbx) + sidt 16(%rbx) + + leaq 1f(%rip), %rbp + + /* + * Switch to IDT and GDT with 32-bit segments. These are the firmware + * GDT and IDT that were installed when the kernel started executing. + * The pointers were saved by the efi32_entry() routine below. + * + * Pass the saved DS selector to the 32-bit code, and use far return to + * restore the saved CS selector. + */ + lidt efi32_boot_idt(%rip) + lgdt efi32_boot_gdt(%rip) + + movzwl efi32_boot_ds(%rip), %edx + movzwq efi32_boot_cs(%rip), %rax + pushq %rax + leaq efi_enter32(%rip), %rax + pushq %rax + lretq + +1: addq $64, %rsp + movq %rdi, %rax + + pop %rbx + movl %ebx, %ss + pop %rbx + movl %ebx, %es + pop %rbx + movl %ebx, %ds + /* Clear out 32-bit selector from FS and GS */ + xorl %ebx, %ebx + movl %ebx, %fs + movl %ebx, %gs + + pop %rbx + pop %rbp + RET +SYM_FUNC_END(__efi64_thunk) + + .code32 +/* + * EFI service pointer must be in %edi. + * + * The stack should represent the 32-bit calling convention. + */ +SYM_FUNC_START_LOCAL(efi_enter32) + /* Load firmware selector into data and stack segment registers */ + movl %edx, %ds + movl %edx, %es + movl %edx, %fs + movl %edx, %gs + movl %edx, %ss + + /* Reload pgtables */ + movl %cr3, %eax + movl %eax, %cr3 + + /* Disable paging */ + movl %cr0, %eax + btrl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + + /* Disable long mode via EFER */ + movl $MSR_EFER, %ecx + rdmsr + btrl $_EFER_LME, %eax + wrmsr + + call *%edi + + /* We must preserve return value */ + movl %eax, %edi + + /* + * Some firmware will return with interrupts enabled. Be sure to + * disable them before we switch GDTs and IDTs. + */ + cli + + lidtl 16(%ebx) + lgdtl (%ebx) + + movl %cr4, %eax + btsl $(X86_CR4_PAE_BIT), %eax + movl %eax, %cr4 + + movl %cr3, %eax + movl %eax, %cr3 + + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + wrmsr + + xorl %eax, %eax + lldt %ax + + pushl $__KERNEL_CS + pushl %ebp + + /* Enable paging */ + movl %cr0, %eax + btsl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + lret +SYM_FUNC_END(efi_enter32) + +/* + * This is the common EFI stub entry point for mixed mode. + * + * Arguments: %ecx image handle + * %edx EFI system table pointer + * %esi struct bootparams pointer (or NULL when not using + * the EFI handover protocol) + * + * Since this is the point of no return for ordinary execution, no registers + * are considered live except for the function parameters. [Note that the EFI + * stub may still exit and return to the firmware using the Exit() EFI boot + * service.] + */ +SYM_FUNC_START(efi32_entry) + call 1f +1: pop %ebx + + /* Save firmware GDTR and code/data selectors */ + sgdtl (efi32_boot_gdt - 1b)(%ebx) + movw %cs, (efi32_boot_cs - 1b)(%ebx) + movw %ds, (efi32_boot_ds - 1b)(%ebx) + + /* Store firmware IDT descriptor */ + sidtl (efi32_boot_idt - 1b)(%ebx) + + /* Store boot arguments */ + leal (efi32_boot_args - 1b)(%ebx), %ebx + movl %ecx, 0(%ebx) + movl %edx, 4(%ebx) + movl %esi, 8(%ebx) + movb $0x0, 12(%ebx) // efi_is64 + + /* Disable paging */ + movl %cr0, %eax + btrl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + + jmp startup_32 +SYM_FUNC_END(efi32_entry) + +#define ST32_boottime 60 // offsetof(efi_system_table_32_t, boottime) +#define BS32_handle_protocol 88 // offsetof(efi_boot_services_32_t, handle_protocol) +#define LI32_image_base 32 // offsetof(efi_loaded_image_32_t, image_base) + +/* + * efi_status_t efi32_pe_entry(efi_handle_t image_handle, + * efi_system_table_32_t *sys_table) + */ +SYM_FUNC_START(efi32_pe_entry) + pushl %ebp + movl %esp, %ebp + pushl %eax // dummy push to allocate loaded_image + + pushl %ebx // save callee-save registers + pushl %edi + + call verify_cpu // check for long mode support + testl %eax, %eax + movl $0x80000003, %eax // EFI_UNSUPPORTED + jnz 2f + + call 1f +1: pop %ebx + + /* Get the loaded image protocol pointer from the image handle */ + leal -4(%ebp), %eax + pushl %eax // &loaded_image + leal (loaded_image_proto - 1b)(%ebx), %eax + pushl %eax // pass the GUID address + pushl 8(%ebp) // pass the image handle + + /* + * Note the alignment of the stack frame. + * sys_table + * handle <-- 16-byte aligned on entry by ABI + * return address + * frame pointer + * loaded_image <-- local variable + * saved %ebx <-- 16-byte aligned here + * saved %edi + * &loaded_image + * &loaded_image_proto + * handle <-- 16-byte aligned for call to handle_protocol + */ + + movl 12(%ebp), %eax // sys_table + movl ST32_boottime(%eax), %eax // sys_table->boottime + call *BS32_handle_protocol(%eax) // sys_table->boottime->handle_protocol + addl $12, %esp // restore argument space + testl %eax, %eax + jnz 2f + + movl 8(%ebp), %ecx // image_handle + movl 12(%ebp), %edx // sys_table + movl -4(%ebp), %esi // loaded_image + movl LI32_image_base(%esi), %esi // loaded_image->image_base + leal (startup_32 - 1b)(%ebx), %ebp // runtime address of startup_32 + /* + * We need to set the image_offset variable here since startup_32() will + * use it before we get to the 64-bit efi_pe_entry() in C code. + */ + subl %esi, %ebp // calculate image_offset + movl %ebp, (image_offset - 1b)(%ebx) // save image_offset + xorl %esi, %esi + jmp efi32_entry // pass %ecx, %edx, %esi + // no other registers remain live + +2: popl %edi // restore callee-save registers + popl %ebx + leave + RET +SYM_FUNC_END(efi32_pe_entry) + + .section ".rodata" + /* EFI loaded image protocol GUID */ + .balign 4 +SYM_DATA_START_LOCAL(loaded_image_proto) + .long 0x5b1b31a1 + .word 0x9562, 0x11d2 + .byte 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b +SYM_DATA_END(loaded_image_proto) + + .data + .balign 8 +SYM_DATA_START_LOCAL(efi32_boot_gdt) + .word 0 + .quad 0 +SYM_DATA_END(efi32_boot_gdt) + +SYM_DATA_START_LOCAL(efi32_boot_idt) + .word 0 + .quad 0 +SYM_DATA_END(efi32_boot_idt) + +SYM_DATA_LOCAL(efi32_boot_cs, .word 0) +SYM_DATA_LOCAL(efi32_boot_ds, .word 0) +SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0) +SYM_DATA(efi_is64, .byte 1) -- cgit v1.2.3