From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/boot/edd.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 180 insertions(+) create mode 100644 arch/x86/boot/edd.c (limited to 'arch/x86/boot/edd.c') diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c new file mode 100644 index 000000000..1fb4bc70c --- /dev/null +++ b/arch/x86/boot/edd.c @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * Get EDD BIOS disk information + */ + +#include "boot.h" +#include +#include "string.h" + +#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) + +/* + * Read the MBR (first sector) from a specific device. + */ +static int read_mbr(u8 devno, void *buf) +{ + struct biosregs ireg, oreg; + + initregs(&ireg); + ireg.ax = 0x0201; /* Legacy Read, one sector */ + ireg.cx = 0x0001; /* Sector 0-0-1 */ + ireg.dl = devno; + ireg.bx = (size_t)buf; + + intcall(0x13, &ireg, &oreg); + + return -(oreg.eflags & X86_EFLAGS_CF); /* 0 or -1 */ +} + +static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig) +{ + int sector_size; + char *mbrbuf_ptr, *mbrbuf_end; + u32 buf_base, mbr_base; + extern char _end[]; + u16 mbr_magic; + + sector_size = ei->params.bytes_per_sector; + if (!sector_size) + sector_size = 512; /* Best available guess */ + + /* Produce a naturally aligned buffer on the heap */ + buf_base = (ds() << 4) + (u32)&_end; + mbr_base = (buf_base+sector_size-1) & ~(sector_size-1); + mbrbuf_ptr = _end + (mbr_base-buf_base); + mbrbuf_end = mbrbuf_ptr + sector_size; + + /* Make sure we actually have space on the heap... */ + if (!(boot_params.hdr.loadflags & CAN_USE_HEAP)) + return -1; + if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr) + return -1; + + memset(mbrbuf_ptr, 0, sector_size); + if (read_mbr(devno, mbrbuf_ptr)) + return -1; + + *mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET]; + mbr_magic = *(u16 *)&mbrbuf_ptr[510]; + + /* check for valid MBR magic */ + return mbr_magic == 0xAA55 ? 0 : -1; +} + +static int get_edd_info(u8 devno, struct edd_info *ei) +{ + struct biosregs ireg, oreg; + + memset(ei, 0, sizeof(*ei)); + + /* Check Extensions Present */ + + initregs(&ireg); + ireg.ah = 0x41; + ireg.bx = EDDMAGIC1; + ireg.dl = devno; + intcall(0x13, &ireg, &oreg); + + if (oreg.eflags & X86_EFLAGS_CF) + return -1; /* No extended information */ + + if (oreg.bx != EDDMAGIC2) + return -1; + + ei->device = devno; + ei->version = oreg.ah; /* EDD version number */ + ei->interface_support = oreg.cx; /* EDD functionality subsets */ + + /* Extended Get Device Parameters */ + + ei->params.length = sizeof(ei->params); + ireg.ah = 0x48; + ireg.si = (size_t)&ei->params; + intcall(0x13, &ireg, &oreg); + + /* Get legacy CHS parameters */ + + /* Ralf Brown recommends setting ES:DI to 0:0 */ + ireg.ah = 0x08; + ireg.es = 0; + intcall(0x13, &ireg, &oreg); + + if (!(oreg.eflags & X86_EFLAGS_CF)) { + ei->legacy_max_cylinder = oreg.ch + ((oreg.cl & 0xc0) << 2); + ei->legacy_max_head = oreg.dh; + ei->legacy_sectors_per_track = oreg.cl & 0x3f; + } + + return 0; +} + +void query_edd(void) +{ + char eddarg[8]; + int do_mbr = 1; +#ifdef CONFIG_EDD_OFF + int do_edd = 0; +#else + int do_edd = 1; +#endif + int be_quiet; + int devno; + struct edd_info ei, *edp; + u32 *mbrptr; + + if (cmdline_find_option("edd", eddarg, sizeof(eddarg)) > 0) { + if (!strcmp(eddarg, "skipmbr") || !strcmp(eddarg, "skip")) { + do_edd = 1; + do_mbr = 0; + } + else if (!strcmp(eddarg, "off")) + do_edd = 0; + else if (!strcmp(eddarg, "on")) + do_edd = 1; + } + + be_quiet = cmdline_find_option_bool("quiet"); + + edp = boot_params.eddbuf; + mbrptr = boot_params.edd_mbr_sig_buffer; + + if (!do_edd) + return; + + /* Bugs in OnBoard or AddOnCards Bios may hang the EDD probe, + * so give a hint if this happens. + */ + + if (!be_quiet) + printf("Probing EDD (edd=off to disable)... "); + + for (devno = 0x80; devno < 0x80+EDD_MBR_SIG_MAX; devno++) { + /* + * Scan the BIOS-supported hard disks and query EDD + * information... + */ + if (!get_edd_info(devno, &ei) + && boot_params.eddbuf_entries < EDDMAXNR) { + memcpy(edp, &ei, sizeof(ei)); + edp++; + boot_params.eddbuf_entries++; + } + + if (do_mbr && !read_mbr_sig(devno, &ei, mbrptr++)) + boot_params.edd_mbr_sig_buf_entries = devno-0x80+1; + } + + if (!be_quiet) + printf("ok\n"); +} + +#endif -- cgit v1.2.3