From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/crypto/Kconfig | 522 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 522 insertions(+) create mode 100644 arch/x86/crypto/Kconfig (limited to 'arch/x86/crypto/Kconfig') diff --git a/arch/x86/crypto/Kconfig b/arch/x86/crypto/Kconfig new file mode 100644 index 000000000..9bbfd01cf --- /dev/null +++ b/arch/x86/crypto/Kconfig @@ -0,0 +1,522 @@ +# SPDX-License-Identifier: GPL-2.0 + +menu "Accelerated Cryptographic Algorithms for CPU (x86)" + +config CRYPTO_CURVE25519_X86 + tristate "Public key crypto: Curve25519 (ADX)" + depends on X86 && 64BIT + select CRYPTO_LIB_CURVE25519_GENERIC + select CRYPTO_ARCH_HAVE_LIB_CURVE25519 + help + Curve25519 algorithm + + Architecture: x86_64 using: + - ADX (large integer arithmetic) + +config CRYPTO_AES_NI_INTEL + tristate "Ciphers: AES, modes: ECB, CBC, CTS, CTR, XTR, XTS, GCM (AES-NI)" + depends on X86 + select CRYPTO_AEAD + select CRYPTO_LIB_AES + select CRYPTO_ALGAPI + select CRYPTO_SKCIPHER + select CRYPTO_SIMD + help + Block cipher: AES cipher algorithms + AEAD cipher: AES with GCM + Length-preserving ciphers: AES with ECB, CBC, CTS, CTR, XTR, XTS + + Architecture: x86 (32-bit and 64-bit) using: + - AES-NI (AES new instructions) + +config CRYPTO_BLOWFISH_X86_64 + tristate "Ciphers: Blowfish, modes: ECB, CBC" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_BLOWFISH_COMMON + imply CRYPTO_CTR + help + Block cipher: Blowfish cipher algorithm + Length-preserving ciphers: Blowfish with ECB and CBC modes + + Architecture: x86_64 + +config CRYPTO_CAMELLIA_X86_64 + tristate "Ciphers: Camellia with modes: ECB, CBC" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + imply CRYPTO_CTR + help + Block cipher: Camellia cipher algorithms + Length-preserving ciphers: Camellia with ECB and CBC modes + + Architecture: x86_64 + +config CRYPTO_CAMELLIA_AESNI_AVX_X86_64 + tristate "Ciphers: Camellia with modes: ECB, CBC (AES-NI/AVX)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_CAMELLIA_X86_64 + select CRYPTO_SIMD + imply CRYPTO_XTS + help + Length-preserving ciphers: Camellia with ECB and CBC modes + + Architecture: x86_64 using: + - AES-NI (AES New Instructions) + - AVX (Advanced Vector Extensions) + +config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 + tristate "Ciphers: Camellia with modes: ECB, CBC (AES-NI/AVX2)" + depends on X86 && 64BIT + select CRYPTO_CAMELLIA_AESNI_AVX_X86_64 + help + Length-preserving ciphers: Camellia with ECB and CBC modes + + Architecture: x86_64 using: + - AES-NI (AES New Instructions) + - AVX2 (Advanced Vector Extensions 2) + +config CRYPTO_CAST5_AVX_X86_64 + tristate "Ciphers: CAST5 with modes: ECB, CBC (AVX)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_CAST5 + select CRYPTO_CAST_COMMON + select CRYPTO_SIMD + imply CRYPTO_CTR + help + Length-preserving ciphers: CAST5 (CAST-128) cipher algorithm + (RFC2144) with ECB and CBC modes + + Architecture: x86_64 using: + - AVX (Advanced Vector Extensions) + + Processes 16 blocks in parallel. + +config CRYPTO_CAST6_AVX_X86_64 + tristate "Ciphers: CAST6 with modes: ECB, CBC (AVX)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_CAST6 + select CRYPTO_CAST_COMMON + select CRYPTO_SIMD + imply CRYPTO_XTS + imply CRYPTO_CTR + help + Length-preserving ciphers: CAST6 (CAST-256) cipher algorithm + (RFC2612) with ECB and CBC modes + + Architecture: x86_64 using: + - AVX (Advanced Vector Extensions) + + Processes eight blocks in parallel. + +config CRYPTO_DES3_EDE_X86_64 + tristate "Ciphers: Triple DES EDE with modes: ECB, CBC" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_LIB_DES + imply CRYPTO_CTR + help + Block cipher: Triple DES EDE (FIPS 46-3) cipher algorithm + Length-preserving ciphers: Triple DES EDE with ECB and CBC modes + + Architecture: x86_64 + + Processes one or three blocks in parallel. + +config CRYPTO_SERPENT_SSE2_X86_64 + tristate "Ciphers: Serpent with modes: ECB, CBC (SSE2)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_SERPENT + select CRYPTO_SIMD + imply CRYPTO_CTR + help + Length-preserving ciphers: Serpent cipher algorithm + with ECB and CBC modes + + Architecture: x86_64 using: + - SSE2 (Streaming SIMD Extensions 2) + + Processes eight blocks in parallel. + +config CRYPTO_SERPENT_SSE2_586 + tristate "Ciphers: Serpent with modes: ECB, CBC (32-bit with SSE2)" + depends on X86 && !64BIT + select CRYPTO_SKCIPHER + select CRYPTO_SERPENT + select CRYPTO_SIMD + imply CRYPTO_CTR + help + Length-preserving ciphers: Serpent cipher algorithm + with ECB and CBC modes + + Architecture: x86 (32-bit) using: + - SSE2 (Streaming SIMD Extensions 2) + + Processes four blocks in parallel. + +config CRYPTO_SERPENT_AVX_X86_64 + tristate "Ciphers: Serpent with modes: ECB, CBC (AVX)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_SERPENT + select CRYPTO_SIMD + imply CRYPTO_XTS + imply CRYPTO_CTR + help + Length-preserving ciphers: Serpent cipher algorithm + with ECB and CBC modes + + Architecture: x86_64 using: + - AVX (Advanced Vector Extensions) + + Processes eight blocks in parallel. + +config CRYPTO_SERPENT_AVX2_X86_64 + tristate "Ciphers: Serpent with modes: ECB, CBC (AVX2)" + depends on X86 && 64BIT + select CRYPTO_SERPENT_AVX_X86_64 + help + Length-preserving ciphers: Serpent cipher algorithm + with ECB and CBC modes + + Architecture: x86_64 using: + - AVX2 (Advanced Vector Extensions 2) + + Processes 16 blocks in parallel. + +config CRYPTO_SM4_AESNI_AVX_X86_64 + tristate "Ciphers: SM4 with modes: ECB, CBC, CFB, CTR (AES-NI/AVX)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_SIMD + select CRYPTO_ALGAPI + select CRYPTO_SM4 + help + Length-preserving ciphers: SM4 cipher algorithms + (OSCCA GB/T 32907-2016) with ECB, CBC, CFB, and CTR modes + + Architecture: x86_64 using: + - AES-NI (AES New Instructions) + - AVX (Advanced Vector Extensions) + + Through two affine transforms, + we can use the AES S-Box to simulate the SM4 S-Box to achieve the + effect of instruction acceleration. + + If unsure, say N. + +config CRYPTO_SM4_AESNI_AVX2_X86_64 + tristate "Ciphers: SM4 with modes: ECB, CBC, CFB, CTR (AES-NI/AVX2)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_SIMD + select CRYPTO_ALGAPI + select CRYPTO_SM4 + select CRYPTO_SM4_AESNI_AVX_X86_64 + help + Length-preserving ciphers: SM4 cipher algorithms + (OSCCA GB/T 32907-2016) with ECB, CBC, CFB, and CTR modes + + Architecture: x86_64 using: + - AES-NI (AES New Instructions) + - AVX2 (Advanced Vector Extensions 2) + + Through two affine transforms, + we can use the AES S-Box to simulate the SM4 S-Box to achieve the + effect of instruction acceleration. + + If unsure, say N. + +config CRYPTO_TWOFISH_586 + tristate "Ciphers: Twofish (32-bit)" + depends on (X86 || UML_X86) && !64BIT + select CRYPTO_ALGAPI + select CRYPTO_TWOFISH_COMMON + imply CRYPTO_CTR + help + Block cipher: Twofish cipher algorithm + + Architecture: x86 (32-bit) + +config CRYPTO_TWOFISH_X86_64 + tristate "Ciphers: Twofish" + depends on (X86 || UML_X86) && 64BIT + select CRYPTO_ALGAPI + select CRYPTO_TWOFISH_COMMON + imply CRYPTO_CTR + help + Block cipher: Twofish cipher algorithm + + Architecture: x86_64 + +config CRYPTO_TWOFISH_X86_64_3WAY + tristate "Ciphers: Twofish with modes: ECB, CBC (3-way parallel)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_TWOFISH_COMMON + select CRYPTO_TWOFISH_X86_64 + help + Length-preserving cipher: Twofish cipher algorithm + with ECB and CBC modes + + Architecture: x86_64 + + Processes three blocks in parallel, better utilizing resources of + out-of-order CPUs. + +config CRYPTO_TWOFISH_AVX_X86_64 + tristate "Ciphers: Twofish with modes: ECB, CBC (AVX)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_SIMD + select CRYPTO_TWOFISH_COMMON + select CRYPTO_TWOFISH_X86_64 + select CRYPTO_TWOFISH_X86_64_3WAY + imply CRYPTO_XTS + help + Length-preserving cipher: Twofish cipher algorithm + with ECB and CBC modes + + Architecture: x86_64 using: + - AVX (Advanced Vector Extensions) + + Processes eight blocks in parallel. + +config CRYPTO_ARIA_AESNI_AVX_X86_64 + tristate "Ciphers: ARIA with modes: ECB, CTR (AES-NI/AVX/GFNI)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_SIMD + select CRYPTO_ALGAPI + select CRYPTO_ARIA + help + Length-preserving cipher: ARIA cipher algorithms + (RFC 5794) with ECB and CTR modes + + Architecture: x86_64 using: + - AES-NI (AES New Instructions) + - AVX (Advanced Vector Extensions) + - GFNI (Galois Field New Instructions) + + Processes 16 blocks in parallel. + +config CRYPTO_ARIA_AESNI_AVX2_X86_64 + tristate "Ciphers: ARIA with modes: ECB, CTR (AES-NI/AVX2/GFNI)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_SIMD + select CRYPTO_ALGAPI + select CRYPTO_ARIA + select CRYPTO_ARIA_AESNI_AVX_X86_64 + help + Length-preserving cipher: ARIA cipher algorithms + (RFC 5794) with ECB and CTR modes + + Architecture: x86_64 using: + - AES-NI (AES New Instructions) + - AVX2 (Advanced Vector Extensions) + - GFNI (Galois Field New Instructions) + + Processes 32 blocks in parallel. + +config CRYPTO_ARIA_GFNI_AVX512_X86_64 + tristate "Ciphers: ARIA with modes: ECB, CTR (AVX512/GFNI)" + depends on X86 && 64BIT && AS_AVX512 && AS_GFNI + select CRYPTO_SKCIPHER + select CRYPTO_SIMD + select CRYPTO_ALGAPI + select CRYPTO_ARIA + select CRYPTO_ARIA_AESNI_AVX_X86_64 + select CRYPTO_ARIA_AESNI_AVX2_X86_64 + help + Length-preserving cipher: ARIA cipher algorithms + (RFC 5794) with ECB and CTR modes + + Architecture: x86_64 using: + - AVX512 (Advanced Vector Extensions) + - GFNI (Galois Field New Instructions) + + Processes 64 blocks in parallel. + +config CRYPTO_CHACHA20_X86_64 + tristate "Ciphers: ChaCha20, XChaCha20, XChaCha12 (SSSE3/AVX2/AVX-512VL)" + depends on X86 && 64BIT + select CRYPTO_SKCIPHER + select CRYPTO_LIB_CHACHA_GENERIC + select CRYPTO_ARCH_HAVE_LIB_CHACHA + help + Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12 + stream cipher algorithms + + Architecture: x86_64 using: + - SSSE3 (Supplemental SSE3) + - AVX2 (Advanced Vector Extensions 2) + - AVX-512VL (Advanced Vector Extensions-512VL) + +config CRYPTO_AEGIS128_AESNI_SSE2 + tristate "AEAD ciphers: AEGIS-128 (AES-NI/SSE2)" + depends on X86 && 64BIT + select CRYPTO_AEAD + select CRYPTO_SIMD + help + AEGIS-128 AEAD algorithm + + Architecture: x86_64 using: + - AES-NI (AES New Instructions) + - SSE2 (Streaming SIMD Extensions 2) + +config CRYPTO_NHPOLY1305_SSE2 + tristate "Hash functions: NHPoly1305 (SSE2)" + depends on X86 && 64BIT + select CRYPTO_NHPOLY1305 + help + NHPoly1305 hash function for Adiantum + + Architecture: x86_64 using: + - SSE2 (Streaming SIMD Extensions 2) + +config CRYPTO_NHPOLY1305_AVX2 + tristate "Hash functions: NHPoly1305 (AVX2)" + depends on X86 && 64BIT + select CRYPTO_NHPOLY1305 + help + NHPoly1305 hash function for Adiantum + + Architecture: x86_64 using: + - AVX2 (Advanced Vector Extensions 2) + +config CRYPTO_BLAKE2S_X86 + bool "Hash functions: BLAKE2s (SSSE3/AVX-512)" + depends on X86 && 64BIT + select CRYPTO_LIB_BLAKE2S_GENERIC + select CRYPTO_ARCH_HAVE_LIB_BLAKE2S + help + BLAKE2s cryptographic hash function (RFC 7693) + + Architecture: x86_64 using: + - SSSE3 (Supplemental SSE3) + - AVX-512 (Advanced Vector Extensions-512) + +config CRYPTO_POLYVAL_CLMUL_NI + tristate "Hash functions: POLYVAL (CLMUL-NI)" + depends on X86 && 64BIT + select CRYPTO_POLYVAL + help + POLYVAL hash function for HCTR2 + + Architecture: x86_64 using: + - CLMUL-NI (carry-less multiplication new instructions) + +config CRYPTO_POLY1305_X86_64 + tristate "Hash functions: Poly1305 (SSE2/AVX2)" + depends on X86 && 64BIT + select CRYPTO_LIB_POLY1305_GENERIC + select CRYPTO_ARCH_HAVE_LIB_POLY1305 + help + Poly1305 authenticator algorithm (RFC7539) + + Architecture: x86_64 using: + - SSE2 (Streaming SIMD Extensions 2) + - AVX2 (Advanced Vector Extensions 2) + +config CRYPTO_SHA1_SSSE3 + tristate "Hash functions: SHA-1 (SSSE3/AVX/AVX2/SHA-NI)" + depends on X86 && 64BIT + select CRYPTO_SHA1 + select CRYPTO_HASH + help + SHA-1 secure hash algorithm (FIPS 180) + + Architecture: x86_64 using: + - SSSE3 (Supplemental SSE3) + - AVX (Advanced Vector Extensions) + - AVX2 (Advanced Vector Extensions 2) + - SHA-NI (SHA Extensions New Instructions) + +config CRYPTO_SHA256_SSSE3 + tristate "Hash functions: SHA-224 and SHA-256 (SSSE3/AVX/AVX2/SHA-NI)" + depends on X86 && 64BIT + select CRYPTO_SHA256 + select CRYPTO_HASH + help + SHA-224 and SHA-256 secure hash algorithms (FIPS 180) + + Architecture: x86_64 using: + - SSSE3 (Supplemental SSE3) + - AVX (Advanced Vector Extensions) + - AVX2 (Advanced Vector Extensions 2) + - SHA-NI (SHA Extensions New Instructions) + +config CRYPTO_SHA512_SSSE3 + tristate "Hash functions: SHA-384 and SHA-512 (SSSE3/AVX/AVX2)" + depends on X86 && 64BIT + select CRYPTO_SHA512 + select CRYPTO_HASH + help + SHA-384 and SHA-512 secure hash algorithms (FIPS 180) + + Architecture: x86_64 using: + - SSSE3 (Supplemental SSE3) + - AVX (Advanced Vector Extensions) + - AVX2 (Advanced Vector Extensions 2) + +config CRYPTO_SM3_AVX_X86_64 + tristate "Hash functions: SM3 (AVX)" + depends on X86 && 64BIT + select CRYPTO_HASH + select CRYPTO_SM3 + help + SM3 secure hash function as defined by OSCCA GM/T 0004-2012 SM3 + + Architecture: x86_64 using: + - AVX (Advanced Vector Extensions) + + If unsure, say N. + +config CRYPTO_GHASH_CLMUL_NI_INTEL + tristate "Hash functions: GHASH (CLMUL-NI)" + depends on X86 && 64BIT + select CRYPTO_CRYPTD + help + GCM GHASH hash function (NIST SP800-38D) + + Architecture: x86_64 using: + - CLMUL-NI (carry-less multiplication new instructions) + +config CRYPTO_CRC32C_INTEL + tristate "CRC32c (SSE4.2/PCLMULQDQ)" + depends on X86 + select CRYPTO_HASH + help + CRC32c CRC algorithm with the iSCSI polynomial (RFC 3385 and RFC 3720) + + Architecture: x86 (32-bit and 64-bit) using: + - SSE4.2 (Streaming SIMD Extensions 4.2) CRC32 instruction + - PCLMULQDQ (carry-less multiplication) + +config CRYPTO_CRC32_PCLMUL + tristate "CRC32 (PCLMULQDQ)" + depends on X86 + select CRYPTO_HASH + select CRC32 + help + CRC32 CRC algorithm (IEEE 802.3) + + Architecture: x86 (32-bit and 64-bit) using: + - PCLMULQDQ (carry-less multiplication) + +config CRYPTO_CRCT10DIF_PCLMUL + tristate "CRCT10DIF (PCLMULQDQ)" + depends on X86 && 64BIT && CRC_T10DIF + select CRYPTO_HASH + help + CRC16 CRC algorithm used for the T10 (SCSI) Data Integrity Field (DIF) + + Architecture: x86_64 using: + - PCLMULQDQ (carry-less multiplication) + +endmenu -- cgit v1.2.3