From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/entry/entry_64_compat.S | 355 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 355 insertions(+) create mode 100644 arch/x86/entry/entry_64_compat.S (limited to 'arch/x86/entry/entry_64_compat.S') diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S new file mode 100644 index 000000000..70150298f --- /dev/null +++ b/arch/x86/entry/entry_64_compat.S @@ -0,0 +1,355 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Compatibility mode system call entry point for x86-64. + * + * Copyright 2000-2002 Andi Kleen, SuSE Labs. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "calling.h" + + .section .entry.text, "ax" + +/* + * 32-bit SYSENTER entry. + * + * 32-bit system calls through the vDSO's __kernel_vsyscall enter here + * on 64-bit kernels running on Intel CPUs. + * + * The SYSENTER instruction, in principle, should *only* occur in the + * vDSO. In practice, a small number of Android devices were shipped + * with a copy of Bionic that inlined a SYSENTER instruction. This + * never happened in any of Google's Bionic versions -- it only happened + * in a narrow range of Intel-provided versions. + * + * SYSENTER loads SS, RSP, CS, and RIP from previously programmed MSRs. + * IF and VM in RFLAGS are cleared (IOW: interrupts are off). + * SYSENTER does not save anything on the stack, + * and does not save old RIP (!!!), RSP, or RFLAGS. + * + * Arguments: + * eax system call number + * ebx arg1 + * ecx arg2 + * edx arg3 + * esi arg4 + * edi arg5 + * ebp user stack + * 0(%ebp) arg6 + */ +SYM_CODE_START(entry_SYSENTER_compat) + UNWIND_HINT_ENTRY + ENDBR + /* Interrupts are off on entry. */ + swapgs + + pushq %rax + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax + popq %rax + + movq PER_CPU_VAR(pcpu_hot + X86_top_of_stack), %rsp + + /* Construct struct pt_regs on stack */ + pushq $__USER_DS /* pt_regs->ss */ + pushq $0 /* pt_regs->sp = 0 (placeholder) */ + + /* + * Push flags. This is nasty. First, interrupts are currently + * off, but we need pt_regs->flags to have IF set. Second, if TS + * was set in usermode, it's still set, and we're singlestepping + * through this code. do_SYSENTER_32() will fix up IF. + */ + pushfq /* pt_regs->flags (except IF = 0) */ + pushq $__USER32_CS /* pt_regs->cs */ + pushq $0 /* pt_regs->ip = 0 (placeholder) */ +SYM_INNER_LABEL(entry_SYSENTER_compat_after_hwframe, SYM_L_GLOBAL) + + /* + * User tracing code (ptrace or signal handlers) might assume that + * the saved RAX contains a 32-bit number when we're invoking a 32-bit + * syscall. Just in case the high bits are nonzero, zero-extend + * the syscall number. (This could almost certainly be deleted + * with no ill effects.) + */ + movl %eax, %eax + + pushq %rax /* pt_regs->orig_ax */ + PUSH_AND_CLEAR_REGS rax=$-ENOSYS + UNWIND_HINT_REGS + + cld + + IBRS_ENTER + UNTRAIN_RET + + /* + * SYSENTER doesn't filter flags, so we need to clear NT and AC + * ourselves. To save a few cycles, we can check whether + * either was set instead of doing an unconditional popfq. + * This needs to happen before enabling interrupts so that + * we don't get preempted with NT set. + * + * If TF is set, we will single-step all the way to here -- do_debug + * will ignore all the traps. (Yes, this is slow, but so is + * single-stepping in general. This allows us to avoid having + * a more complicated code to handle the case where a user program + * forces us to single-step through the SYSENTER entry code.) + * + * NB.: .Lsysenter_fix_flags is a label with the code under it moved + * out-of-line as an optimization: NT is unlikely to be set in the + * majority of the cases and instead of polluting the I$ unnecessarily, + * we're keeping that code behind a branch which will predict as + * not-taken and therefore its instructions won't be fetched. + */ + testl $X86_EFLAGS_NT|X86_EFLAGS_AC|X86_EFLAGS_TF, EFLAGS(%rsp) + jnz .Lsysenter_fix_flags +.Lsysenter_flags_fixed: + + movq %rsp, %rdi + call do_SYSENTER_32 + /* XEN PV guests always use IRET path */ + ALTERNATIVE "testl %eax, %eax; jz swapgs_restore_regs_and_return_to_usermode", \ + "jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV + jmp sysret32_from_system_call + +.Lsysenter_fix_flags: + pushq $X86_EFLAGS_FIXED + popfq + jmp .Lsysenter_flags_fixed +SYM_INNER_LABEL(__end_entry_SYSENTER_compat, SYM_L_GLOBAL) +SYM_CODE_END(entry_SYSENTER_compat) + +/* + * 32-bit SYSCALL entry. + * + * 32-bit system calls through the vDSO's __kernel_vsyscall enter here + * on 64-bit kernels running on AMD CPUs. + * + * The SYSCALL instruction, in principle, should *only* occur in the + * vDSO. In practice, it appears that this really is the case. + * As evidence: + * + * - The calling convention for SYSCALL has changed several times without + * anyone noticing. + * + * - Prior to the in-kernel X86_BUG_SYSRET_SS_ATTRS fixup, anything + * user task that did SYSCALL without immediately reloading SS + * would randomly crash. + * + * - Most programmers do not directly target AMD CPUs, and the 32-bit + * SYSCALL instruction does not exist on Intel CPUs. Even on AMD + * CPUs, Linux disables the SYSCALL instruction on 32-bit kernels + * because the SYSCALL instruction in legacy/native 32-bit mode (as + * opposed to compat mode) is sufficiently poorly designed as to be + * essentially unusable. + * + * 32-bit SYSCALL saves RIP to RCX, clears RFLAGS.RF, then saves + * RFLAGS to R11, then loads new SS, CS, and RIP from previously + * programmed MSRs. RFLAGS gets masked by a value from another MSR + * (so CLD and CLAC are not needed). SYSCALL does not save anything on + * the stack and does not change RSP. + * + * Note: RFLAGS saving+masking-with-MSR happens only in Long mode + * (in legacy 32-bit mode, IF, RF and VM bits are cleared and that's it). + * Don't get confused: RFLAGS saving+masking depends on Long Mode Active bit + * (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes + * or target CS descriptor's L bit (SYSCALL does not read segment descriptors). + * + * Arguments: + * eax system call number + * ecx return address + * ebx arg1 + * ebp arg2 (note: not saved in the stack frame, should not be touched) + * edx arg3 + * esi arg4 + * edi arg5 + * esp user stack + * 0(%esp) arg6 + */ +SYM_CODE_START(entry_SYSCALL_compat) + UNWIND_HINT_ENTRY + ENDBR + /* Interrupts are off on entry. */ + swapgs + + /* Stash user ESP */ + movl %esp, %r8d + + /* Use %rsp as scratch reg. User ESP is stashed in r8 */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp + + /* Switch to the kernel stack */ + movq PER_CPU_VAR(pcpu_hot + X86_top_of_stack), %rsp + +SYM_INNER_LABEL(entry_SYSCALL_compat_safe_stack, SYM_L_GLOBAL) + ANNOTATE_NOENDBR + + /* Construct struct pt_regs on stack */ + pushq $__USER_DS /* pt_regs->ss */ + pushq %r8 /* pt_regs->sp */ + pushq %r11 /* pt_regs->flags */ + pushq $__USER32_CS /* pt_regs->cs */ + pushq %rcx /* pt_regs->ip */ +SYM_INNER_LABEL(entry_SYSCALL_compat_after_hwframe, SYM_L_GLOBAL) + movl %eax, %eax /* discard orig_ax high bits */ + pushq %rax /* pt_regs->orig_ax */ + PUSH_AND_CLEAR_REGS rcx=%rbp rax=$-ENOSYS + UNWIND_HINT_REGS + + IBRS_ENTER + UNTRAIN_RET + + movq %rsp, %rdi + call do_fast_syscall_32 + /* XEN PV guests always use IRET path */ + ALTERNATIVE "testl %eax, %eax; jz swapgs_restore_regs_and_return_to_usermode", \ + "jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV + + /* Opportunistic SYSRET */ +sysret32_from_system_call: + /* + * We are not going to return to userspace from the trampoline + * stack. So let's erase the thread stack right now. + */ + STACKLEAK_ERASE + + IBRS_EXIT + + movq RBX(%rsp), %rbx /* pt_regs->rbx */ + movq RBP(%rsp), %rbp /* pt_regs->rbp */ + movq EFLAGS(%rsp), %r11 /* pt_regs->flags (in r11) */ + movq RIP(%rsp), %rcx /* pt_regs->ip (in rcx) */ + addq $RAX, %rsp /* Skip r8-r15 */ + popq %rax /* pt_regs->rax */ + popq %rdx /* Skip pt_regs->cx */ + popq %rdx /* pt_regs->dx */ + popq %rsi /* pt_regs->si */ + popq %rdi /* pt_regs->di */ + + /* + * USERGS_SYSRET32 does: + * GSBASE = user's GS base + * EIP = ECX + * RFLAGS = R11 + * CS = __USER32_CS + * SS = __USER_DS + * + * ECX will not match pt_regs->cx, but we're returning to a vDSO + * trampoline that will fix up RCX, so this is okay. + * + * R12-R15 are callee-saved, so they contain whatever was in them + * when the system call started, which is already known to user + * code. We zero R8-R10 to avoid info leaks. + */ + movq RSP-ORIG_RAX(%rsp), %rsp +SYM_INNER_LABEL(entry_SYSRETL_compat_unsafe_stack, SYM_L_GLOBAL) + ANNOTATE_NOENDBR + + /* + * The original userspace %rsp (RSP-ORIG_RAX(%rsp)) is stored + * on the process stack which is not mapped to userspace and + * not readable after we SWITCH_TO_USER_CR3. Delay the CR3 + * switch until after after the last reference to the process + * stack. + * + * %r8/%r9 are zeroed before the sysret, thus safe to clobber. + */ + SWITCH_TO_USER_CR3_NOSTACK scratch_reg=%r8 scratch_reg2=%r9 + + xorl %r8d, %r8d + xorl %r9d, %r9d + xorl %r10d, %r10d + swapgs + sysretl +SYM_INNER_LABEL(entry_SYSRETL_compat_end, SYM_L_GLOBAL) + ANNOTATE_NOENDBR + int3 +SYM_CODE_END(entry_SYSCALL_compat) + +/* + * 32-bit legacy system call entry. + * + * 32-bit x86 Linux system calls traditionally used the INT $0x80 + * instruction. INT $0x80 lands here. + * + * This entry point can be used by 32-bit and 64-bit programs to perform + * 32-bit system calls. Instances of INT $0x80 can be found inline in + * various programs and libraries. It is also used by the vDSO's + * __kernel_vsyscall fallback for hardware that doesn't support a faster + * entry method. Restarted 32-bit system calls also fall back to INT + * $0x80 regardless of what instruction was originally used to do the + * system call. + * + * This is considered a slow path. It is not used by most libc + * implementations on modern hardware except during process startup. + * + * Arguments: + * eax system call number + * ebx arg1 + * ecx arg2 + * edx arg3 + * esi arg4 + * edi arg5 + * ebp arg6 + */ +SYM_CODE_START(entry_INT80_compat) + UNWIND_HINT_ENTRY + ENDBR + /* + * Interrupts are off on entry. + */ + ASM_CLAC /* Do this early to minimize exposure */ + ALTERNATIVE "swapgs", "", X86_FEATURE_XENPV + + /* + * User tracing code (ptrace or signal handlers) might assume that + * the saved RAX contains a 32-bit number when we're invoking a 32-bit + * syscall. Just in case the high bits are nonzero, zero-extend + * the syscall number. (This could almost certainly be deleted + * with no ill effects.) + */ + movl %eax, %eax + + /* switch to thread stack expects orig_ax and rdi to be pushed */ + pushq %rax /* pt_regs->orig_ax */ + + /* Need to switch before accessing the thread stack. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax + + /* In the Xen PV case we already run on the thread stack. */ + ALTERNATIVE "", "jmp .Lint80_keep_stack", X86_FEATURE_XENPV + + movq %rsp, %rax + movq PER_CPU_VAR(pcpu_hot + X86_top_of_stack), %rsp + + pushq 5*8(%rax) /* regs->ss */ + pushq 4*8(%rax) /* regs->rsp */ + pushq 3*8(%rax) /* regs->eflags */ + pushq 2*8(%rax) /* regs->cs */ + pushq 1*8(%rax) /* regs->ip */ + pushq 0*8(%rax) /* regs->orig_ax */ +.Lint80_keep_stack: + + PUSH_AND_CLEAR_REGS rax=$-ENOSYS + UNWIND_HINT_REGS + + cld + + IBRS_ENTER + UNTRAIN_RET + + movq %rsp, %rdi + call do_int80_syscall_32 + jmp swapgs_restore_regs_and_return_to_usermode +SYM_CODE_END(entry_INT80_compat) -- cgit v1.2.3