From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/include/asm/asm.h | 225 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 225 insertions(+) create mode 100644 arch/x86/include/asm/asm.h (limited to 'arch/x86/include/asm/asm.h') diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h new file mode 100644 index 000000000..fbcfec4dc --- /dev/null +++ b/arch/x86/include/asm/asm.h @@ -0,0 +1,225 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_ASM_H +#define _ASM_X86_ASM_H + +#ifdef __ASSEMBLY__ +# define __ASM_FORM(x, ...) x,## __VA_ARGS__ +# define __ASM_FORM_RAW(x, ...) x,## __VA_ARGS__ +# define __ASM_FORM_COMMA(x, ...) x,## __VA_ARGS__, +# define __ASM_REGPFX % +#else +#include +# define __ASM_FORM(x, ...) " " __stringify(x,##__VA_ARGS__) " " +# define __ASM_FORM_RAW(x, ...) __stringify(x,##__VA_ARGS__) +# define __ASM_FORM_COMMA(x, ...) " " __stringify(x,##__VA_ARGS__) "," +# define __ASM_REGPFX %% +#endif + +#define _ASM_BYTES(x, ...) __ASM_FORM(.byte x,##__VA_ARGS__ ;) + +#ifndef __x86_64__ +/* 32 bit */ +# define __ASM_SEL(a,b) __ASM_FORM(a) +# define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(a) +#else +/* 64 bit */ +# define __ASM_SEL(a,b) __ASM_FORM(b) +# define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(b) +#endif + +#define __ASM_SIZE(inst, ...) __ASM_SEL(inst##l##__VA_ARGS__, \ + inst##q##__VA_ARGS__) +#define __ASM_REG(reg) __ASM_SEL_RAW(e##reg, r##reg) + +#define _ASM_PTR __ASM_SEL(.long, .quad) +#define _ASM_ALIGN __ASM_SEL(.balign 4, .balign 8) + +#define _ASM_MOV __ASM_SIZE(mov) +#define _ASM_INC __ASM_SIZE(inc) +#define _ASM_DEC __ASM_SIZE(dec) +#define _ASM_ADD __ASM_SIZE(add) +#define _ASM_SUB __ASM_SIZE(sub) +#define _ASM_XADD __ASM_SIZE(xadd) +#define _ASM_MUL __ASM_SIZE(mul) + +#define _ASM_AX __ASM_REG(ax) +#define _ASM_BX __ASM_REG(bx) +#define _ASM_CX __ASM_REG(cx) +#define _ASM_DX __ASM_REG(dx) +#define _ASM_SP __ASM_REG(sp) +#define _ASM_BP __ASM_REG(bp) +#define _ASM_SI __ASM_REG(si) +#define _ASM_DI __ASM_REG(di) + +/* Adds a (%rip) suffix on 64 bits only; for immediate memory references */ +#define _ASM_RIP(x) __ASM_SEL_RAW(x, x (__ASM_REGPFX rip)) + +#ifndef __x86_64__ +/* 32 bit */ + +#define _ASM_ARG1 _ASM_AX +#define _ASM_ARG2 _ASM_DX +#define _ASM_ARG3 _ASM_CX + +#define _ASM_ARG1L eax +#define _ASM_ARG2L edx +#define _ASM_ARG3L ecx + +#define _ASM_ARG1W ax +#define _ASM_ARG2W dx +#define _ASM_ARG3W cx + +#define _ASM_ARG1B al +#define _ASM_ARG2B dl +#define _ASM_ARG3B cl + +#else +/* 64 bit */ + +#define _ASM_ARG1 _ASM_DI +#define _ASM_ARG2 _ASM_SI +#define _ASM_ARG3 _ASM_DX +#define _ASM_ARG4 _ASM_CX +#define _ASM_ARG5 r8 +#define _ASM_ARG6 r9 + +#define _ASM_ARG1Q rdi +#define _ASM_ARG2Q rsi +#define _ASM_ARG3Q rdx +#define _ASM_ARG4Q rcx +#define _ASM_ARG5Q r8 +#define _ASM_ARG6Q r9 + +#define _ASM_ARG1L edi +#define _ASM_ARG2L esi +#define _ASM_ARG3L edx +#define _ASM_ARG4L ecx +#define _ASM_ARG5L r8d +#define _ASM_ARG6L r9d + +#define _ASM_ARG1W di +#define _ASM_ARG2W si +#define _ASM_ARG3W dx +#define _ASM_ARG4W cx +#define _ASM_ARG5W r8w +#define _ASM_ARG6W r9w + +#define _ASM_ARG1B dil +#define _ASM_ARG2B sil +#define _ASM_ARG3B dl +#define _ASM_ARG4B cl +#define _ASM_ARG5B r8b +#define _ASM_ARG6B r9b + +#endif + +/* + * Macros to generate condition code outputs from inline assembly, + * The output operand must be type "bool". + */ +#ifdef __GCC_ASM_FLAG_OUTPUTS__ +# define CC_SET(c) "\n\t/* output condition code " #c "*/\n" +# define CC_OUT(c) "=@cc" #c +#else +# define CC_SET(c) "\n\tset" #c " %[_cc_" #c "]\n" +# define CC_OUT(c) [_cc_ ## c] "=qm" +#endif + +#ifdef __KERNEL__ + +# include + +/* Exception table entry */ +#ifdef __ASSEMBLY__ + +# define _ASM_EXTABLE_TYPE(from, to, type) \ + .pushsection "__ex_table","a" ; \ + .balign 4 ; \ + .long (from) - . ; \ + .long (to) - . ; \ + .long type ; \ + .popsection + +# ifdef CONFIG_KPROBES +# define _ASM_NOKPROBE(entry) \ + .pushsection "_kprobe_blacklist","aw" ; \ + _ASM_ALIGN ; \ + _ASM_PTR (entry); \ + .popsection +# else +# define _ASM_NOKPROBE(entry) +# endif + +#else /* ! __ASSEMBLY__ */ + +# define DEFINE_EXTABLE_TYPE_REG \ + ".macro extable_type_reg type:req reg:req\n" \ + ".set .Lfound, 0\n" \ + ".set .Lregnr, 0\n" \ + ".irp rs,rax,rcx,rdx,rbx,rsp,rbp,rsi,rdi,r8,r9,r10,r11,r12,r13,r14,r15\n" \ + ".ifc \\reg, %%\\rs\n" \ + ".set .Lfound, .Lfound+1\n" \ + ".long \\type + (.Lregnr << 8)\n" \ + ".endif\n" \ + ".set .Lregnr, .Lregnr+1\n" \ + ".endr\n" \ + ".set .Lregnr, 0\n" \ + ".irp rs,eax,ecx,edx,ebx,esp,ebp,esi,edi,r8d,r9d,r10d,r11d,r12d,r13d,r14d,r15d\n" \ + ".ifc \\reg, %%\\rs\n" \ + ".set .Lfound, .Lfound+1\n" \ + ".long \\type + (.Lregnr << 8)\n" \ + ".endif\n" \ + ".set .Lregnr, .Lregnr+1\n" \ + ".endr\n" \ + ".if (.Lfound != 1)\n" \ + ".error \"extable_type_reg: bad register argument\"\n" \ + ".endif\n" \ + ".endm\n" + +# define UNDEFINE_EXTABLE_TYPE_REG \ + ".purgem extable_type_reg\n" + +# define _ASM_EXTABLE_TYPE(from, to, type) \ + " .pushsection \"__ex_table\",\"a\"\n" \ + " .balign 4\n" \ + " .long (" #from ") - .\n" \ + " .long (" #to ") - .\n" \ + " .long " __stringify(type) " \n" \ + " .popsection\n" + +# define _ASM_EXTABLE_TYPE_REG(from, to, type, reg) \ + " .pushsection \"__ex_table\",\"a\"\n" \ + " .balign 4\n" \ + " .long (" #from ") - .\n" \ + " .long (" #to ") - .\n" \ + DEFINE_EXTABLE_TYPE_REG \ + "extable_type_reg reg=" __stringify(reg) ", type=" __stringify(type) " \n"\ + UNDEFINE_EXTABLE_TYPE_REG \ + " .popsection\n" + +/* For C file, we already have NOKPROBE_SYMBOL macro */ + +/* + * This output constraint should be used for any inline asm which has a "call" + * instruction. Otherwise the asm may be inserted before the frame pointer + * gets set up by the containing function. If you forget to do this, objtool + * may print a "call without frame pointer save/setup" warning. + */ +register unsigned long current_stack_pointer asm(_ASM_SP); +#define ASM_CALL_CONSTRAINT "+r" (current_stack_pointer) +#endif /* __ASSEMBLY__ */ + +#define _ASM_EXTABLE(from, to) \ + _ASM_EXTABLE_TYPE(from, to, EX_TYPE_DEFAULT) + +#define _ASM_EXTABLE_UA(from, to) \ + _ASM_EXTABLE_TYPE(from, to, EX_TYPE_UACCESS) + +#define _ASM_EXTABLE_CPY(from, to) \ + _ASM_EXTABLE_TYPE(from, to, EX_TYPE_COPY) + +#define _ASM_EXTABLE_FAULT(from, to) \ + _ASM_EXTABLE_TYPE(from, to, EX_TYPE_FAULT) + +#endif /* __KERNEL__ */ +#endif /* _ASM_X86_ASM_H */ -- cgit v1.2.3