From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/include/asm/microcode.h | 138 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 138 insertions(+) create mode 100644 arch/x86/include/asm/microcode.h (limited to 'arch/x86/include/asm/microcode.h') diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h new file mode 100644 index 000000000..320566a04 --- /dev/null +++ b/arch/x86/include/asm/microcode.h @@ -0,0 +1,138 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_MICROCODE_H +#define _ASM_X86_MICROCODE_H + +#include +#include +#include + +struct ucode_patch { + struct list_head plist; + void *data; /* Intel uses only this one */ + unsigned int size; + u32 patch_id; + u16 equiv_cpu; +}; + +extern struct list_head microcode_cache; + +struct cpu_signature { + unsigned int sig; + unsigned int pf; + unsigned int rev; +}; + +struct device; + +enum ucode_state { + UCODE_OK = 0, + UCODE_NEW, + UCODE_UPDATED, + UCODE_NFOUND, + UCODE_ERROR, +}; + +struct microcode_ops { + enum ucode_state (*request_microcode_fw) (int cpu, struct device *); + + void (*microcode_fini_cpu) (int cpu); + + /* + * The generic 'microcode_core' part guarantees that + * the callbacks below run on a target cpu when they + * are being called. + * See also the "Synchronization" section in microcode_core.c. + */ + enum ucode_state (*apply_microcode) (int cpu); + int (*collect_cpu_info) (int cpu, struct cpu_signature *csig); +}; + +struct ucode_cpu_info { + struct cpu_signature cpu_sig; + void *mc; +}; +extern struct ucode_cpu_info ucode_cpu_info[]; +struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa); + +#ifdef CONFIG_MICROCODE_INTEL +extern struct microcode_ops * __init init_intel_microcode(void); +#else +static inline struct microcode_ops * __init init_intel_microcode(void) +{ + return NULL; +} +#endif /* CONFIG_MICROCODE_INTEL */ + +#ifdef CONFIG_MICROCODE_AMD +extern struct microcode_ops * __init init_amd_microcode(void); +extern void __exit exit_amd_microcode(void); +#else +static inline struct microcode_ops * __init init_amd_microcode(void) +{ + return NULL; +} +static inline void __exit exit_amd_microcode(void) {} +#endif + +#define MAX_UCODE_COUNT 128 + +#define QCHAR(a, b, c, d) ((a) + ((b) << 8) + ((c) << 16) + ((d) << 24)) +#define CPUID_INTEL1 QCHAR('G', 'e', 'n', 'u') +#define CPUID_INTEL2 QCHAR('i', 'n', 'e', 'I') +#define CPUID_INTEL3 QCHAR('n', 't', 'e', 'l') +#define CPUID_AMD1 QCHAR('A', 'u', 't', 'h') +#define CPUID_AMD2 QCHAR('e', 'n', 't', 'i') +#define CPUID_AMD3 QCHAR('c', 'A', 'M', 'D') + +#define CPUID_IS(a, b, c, ebx, ecx, edx) \ + (!((ebx ^ (a))|(edx ^ (b))|(ecx ^ (c)))) + +/* + * In early loading microcode phase on BSP, boot_cpu_data is not set up yet. + * x86_cpuid_vendor() gets vendor id for BSP. + * + * In 32 bit AP case, accessing boot_cpu_data needs linear address. To simplify + * coding, we still use x86_cpuid_vendor() to get vendor id for AP. + * + * x86_cpuid_vendor() gets vendor information directly from CPUID. + */ +static inline int x86_cpuid_vendor(void) +{ + u32 eax = 0x00000000; + u32 ebx, ecx = 0, edx; + + native_cpuid(&eax, &ebx, &ecx, &edx); + + if (CPUID_IS(CPUID_INTEL1, CPUID_INTEL2, CPUID_INTEL3, ebx, ecx, edx)) + return X86_VENDOR_INTEL; + + if (CPUID_IS(CPUID_AMD1, CPUID_AMD2, CPUID_AMD3, ebx, ecx, edx)) + return X86_VENDOR_AMD; + + return X86_VENDOR_UNKNOWN; +} + +static inline unsigned int x86_cpuid_family(void) +{ + u32 eax = 0x00000001; + u32 ebx, ecx = 0, edx; + + native_cpuid(&eax, &ebx, &ecx, &edx); + + return x86_family(eax); +} + +#ifdef CONFIG_MICROCODE +extern void __init load_ucode_bsp(void); +extern void load_ucode_ap(void); +void reload_early_microcode(unsigned int cpu); +extern bool initrd_gone; +void microcode_bsp_resume(void); +#else +static inline void __init load_ucode_bsp(void) { } +static inline void load_ucode_ap(void) { } +static inline void reload_early_microcode(unsigned int cpu) { } +static inline void microcode_bsp_resume(void) { } +#endif + +#endif /* _ASM_X86_MICROCODE_H */ -- cgit v1.2.3