From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 21 Feb 2023 18:24:12 -0800
Subject: Merge tag 'net-next-6.3' of
 git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...
---
 arch/x86/include/uapi/asm/Kbuild            |   4 +
 arch/x86/include/uapi/asm/a.out.h           |  21 ++
 arch/x86/include/uapi/asm/amd_hsmp.h        | 307 ++++++++++++++++
 arch/x86/include/uapi/asm/auxvec.h          |  20 ++
 arch/x86/include/uapi/asm/bitsperlong.h     |  14 +
 arch/x86/include/uapi/asm/boot.h            |  11 +
 arch/x86/include/uapi/asm/bootparam.h       | 284 +++++++++++++++
 arch/x86/include/uapi/asm/byteorder.h       |   7 +
 arch/x86/include/uapi/asm/debugreg.h        |  82 +++++
 arch/x86/include/uapi/asm/e820.h            |  82 +++++
 arch/x86/include/uapi/asm/hw_breakpoint.h   |   2 +
 arch/x86/include/uapi/asm/hwcap2.h          |  13 +
 arch/x86/include/uapi/asm/ist.h             |  30 ++
 arch/x86/include/uapi/asm/kvm.h             | 532 ++++++++++++++++++++++++++++
 arch/x86/include/uapi/asm/kvm_para.h        | 153 ++++++++
 arch/x86/include/uapi/asm/kvm_perf.h        |  17 +
 arch/x86/include/uapi/asm/ldt.h             |  48 +++
 arch/x86/include/uapi/asm/mce.h             |  45 +++
 arch/x86/include/uapi/asm/mman.h            |  17 +
 arch/x86/include/uapi/asm/msgbuf.h          |  35 ++
 arch/x86/include/uapi/asm/msr.h             |  14 +
 arch/x86/include/uapi/asm/mtrr.h            | 124 +++++++
 arch/x86/include/uapi/asm/perf_regs.h       |  58 +++
 arch/x86/include/uapi/asm/posix_types.h     |  10 +
 arch/x86/include/uapi/asm/posix_types_32.h  |  26 ++
 arch/x86/include/uapi/asm/posix_types_64.h  |  20 ++
 arch/x86/include/uapi/asm/posix_types_x32.h |  20 ++
 arch/x86/include/uapi/asm/prctl.h           |  23 ++
 arch/x86/include/uapi/asm/processor-flags.h | 168 +++++++++
 arch/x86/include/uapi/asm/ptrace-abi.h      |  94 +++++
 arch/x86/include/uapi/asm/ptrace.h          |  86 +++++
 arch/x86/include/uapi/asm/sembuf.h          |  36 ++
 arch/x86/include/uapi/asm/setup.h           |   1 +
 arch/x86/include/uapi/asm/sgx.h             | 232 ++++++++++++
 arch/x86/include/uapi/asm/shmbuf.h          |  47 +++
 arch/x86/include/uapi/asm/sigcontext.h      | 389 ++++++++++++++++++++
 arch/x86/include/uapi/asm/sigcontext32.h    |   9 +
 arch/x86/include/uapi/asm/siginfo.h         |  15 +
 arch/x86/include/uapi/asm/signal.h          | 112 ++++++
 arch/x86/include/uapi/asm/stat.h            | 138 ++++++++
 arch/x86/include/uapi/asm/statfs.h          |  13 +
 arch/x86/include/uapi/asm/svm.h             | 243 +++++++++++++
 arch/x86/include/uapi/asm/swab.h            |  37 ++
 arch/x86/include/uapi/asm/ucontext.h        |  56 +++
 arch/x86/include/uapi/asm/unistd.h          |  25 ++
 arch/x86/include/uapi/asm/vm86.h            | 130 +++++++
 arch/x86/include/uapi/asm/vmx.h             | 167 +++++++++
 arch/x86/include/uapi/asm/vsyscall.h        |  13 +
 48 files changed, 4030 insertions(+)
 create mode 100644 arch/x86/include/uapi/asm/Kbuild
 create mode 100644 arch/x86/include/uapi/asm/a.out.h
 create mode 100644 arch/x86/include/uapi/asm/amd_hsmp.h
 create mode 100644 arch/x86/include/uapi/asm/auxvec.h
 create mode 100644 arch/x86/include/uapi/asm/bitsperlong.h
 create mode 100644 arch/x86/include/uapi/asm/boot.h
 create mode 100644 arch/x86/include/uapi/asm/bootparam.h
 create mode 100644 arch/x86/include/uapi/asm/byteorder.h
 create mode 100644 arch/x86/include/uapi/asm/debugreg.h
 create mode 100644 arch/x86/include/uapi/asm/e820.h
 create mode 100644 arch/x86/include/uapi/asm/hw_breakpoint.h
 create mode 100644 arch/x86/include/uapi/asm/hwcap2.h
 create mode 100644 arch/x86/include/uapi/asm/ist.h
 create mode 100644 arch/x86/include/uapi/asm/kvm.h
 create mode 100644 arch/x86/include/uapi/asm/kvm_para.h
 create mode 100644 arch/x86/include/uapi/asm/kvm_perf.h
 create mode 100644 arch/x86/include/uapi/asm/ldt.h
 create mode 100644 arch/x86/include/uapi/asm/mce.h
 create mode 100644 arch/x86/include/uapi/asm/mman.h
 create mode 100644 arch/x86/include/uapi/asm/msgbuf.h
 create mode 100644 arch/x86/include/uapi/asm/msr.h
 create mode 100644 arch/x86/include/uapi/asm/mtrr.h
 create mode 100644 arch/x86/include/uapi/asm/perf_regs.h
 create mode 100644 arch/x86/include/uapi/asm/posix_types.h
 create mode 100644 arch/x86/include/uapi/asm/posix_types_32.h
 create mode 100644 arch/x86/include/uapi/asm/posix_types_64.h
 create mode 100644 arch/x86/include/uapi/asm/posix_types_x32.h
 create mode 100644 arch/x86/include/uapi/asm/prctl.h
 create mode 100644 arch/x86/include/uapi/asm/processor-flags.h
 create mode 100644 arch/x86/include/uapi/asm/ptrace-abi.h
 create mode 100644 arch/x86/include/uapi/asm/ptrace.h
 create mode 100644 arch/x86/include/uapi/asm/sembuf.h
 create mode 100644 arch/x86/include/uapi/asm/setup.h
 create mode 100644 arch/x86/include/uapi/asm/sgx.h
 create mode 100644 arch/x86/include/uapi/asm/shmbuf.h
 create mode 100644 arch/x86/include/uapi/asm/sigcontext.h
 create mode 100644 arch/x86/include/uapi/asm/sigcontext32.h
 create mode 100644 arch/x86/include/uapi/asm/siginfo.h
 create mode 100644 arch/x86/include/uapi/asm/signal.h
 create mode 100644 arch/x86/include/uapi/asm/stat.h
 create mode 100644 arch/x86/include/uapi/asm/statfs.h
 create mode 100644 arch/x86/include/uapi/asm/svm.h
 create mode 100644 arch/x86/include/uapi/asm/swab.h
 create mode 100644 arch/x86/include/uapi/asm/ucontext.h
 create mode 100644 arch/x86/include/uapi/asm/unistd.h
 create mode 100644 arch/x86/include/uapi/asm/vm86.h
 create mode 100644 arch/x86/include/uapi/asm/vmx.h
 create mode 100644 arch/x86/include/uapi/asm/vsyscall.h

(limited to 'arch/x86/include/uapi/asm')

diff --git a/arch/x86/include/uapi/asm/Kbuild b/arch/x86/include/uapi/asm/Kbuild
new file mode 100644
index 000000000..39606a856
--- /dev/null
+++ b/arch/x86/include/uapi/asm/Kbuild
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+generated-y += unistd_32.h
+generated-y += unistd_64.h
+generated-y += unistd_x32.h
diff --git a/arch/x86/include/uapi/asm/a.out.h b/arch/x86/include/uapi/asm/a.out.h
new file mode 100644
index 000000000..094c49d8e
--- /dev/null
+++ b/arch/x86/include/uapi/asm/a.out.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_A_OUT_H
+#define _ASM_X86_A_OUT_H
+
+struct exec
+{
+	unsigned int a_info;	/* Use macros N_MAGIC, etc for access */
+	unsigned a_text;	/* length of text, in bytes */
+	unsigned a_data;	/* length of data, in bytes */
+	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+	unsigned a_syms;	/* length of symbol table data in file, in bytes */
+	unsigned a_entry;	/* start address */
+	unsigned a_trsize;	/* length of relocation info for text, in bytes */
+	unsigned a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#endif /* _ASM_X86_A_OUT_H */
diff --git a/arch/x86/include/uapi/asm/amd_hsmp.h b/arch/x86/include/uapi/asm/amd_hsmp.h
new file mode 100644
index 000000000..769b93944
--- /dev/null
+++ b/arch/x86/include/uapi/asm/amd_hsmp.h
@@ -0,0 +1,307 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
+#ifndef _UAPI_ASM_X86_AMD_HSMP_H_
+#define _UAPI_ASM_X86_AMD_HSMP_H_
+
+#include <linux/types.h>
+
+#pragma pack(4)
+
+#define HSMP_MAX_MSG_LEN 8
+
+/*
+ * HSMP Messages supported
+ */
+enum hsmp_message_ids {
+	HSMP_TEST = 1,			/* 01h Increments input value by 1 */
+	HSMP_GET_SMU_VER,		/* 02h SMU FW version */
+	HSMP_GET_PROTO_VER,		/* 03h HSMP interface version */
+	HSMP_GET_SOCKET_POWER,		/* 04h average package power consumption */
+	HSMP_SET_SOCKET_POWER_LIMIT,	/* 05h Set the socket power limit */
+	HSMP_GET_SOCKET_POWER_LIMIT,	/* 06h Get current socket power limit */
+	HSMP_GET_SOCKET_POWER_LIMIT_MAX,/* 07h Get maximum socket power value */
+	HSMP_SET_BOOST_LIMIT,		/* 08h Set a core maximum frequency limit */
+	HSMP_SET_BOOST_LIMIT_SOCKET,	/* 09h Set socket maximum frequency level */
+	HSMP_GET_BOOST_LIMIT,		/* 0Ah Get current frequency limit */
+	HSMP_GET_PROC_HOT,		/* 0Bh Get PROCHOT status */
+	HSMP_SET_XGMI_LINK_WIDTH,	/* 0Ch Set max and min width of xGMI Link */
+	HSMP_SET_DF_PSTATE,		/* 0Dh Alter APEnable/Disable messages behavior */
+	HSMP_SET_AUTO_DF_PSTATE,	/* 0Eh Enable DF P-State Performance Boost algorithm */
+	HSMP_GET_FCLK_MCLK,		/* 0Fh Get FCLK and MEMCLK for current socket */
+	HSMP_GET_CCLK_THROTTLE_LIMIT,	/* 10h Get CCLK frequency limit in socket */
+	HSMP_GET_C0_PERCENT,		/* 11h Get average C0 residency in socket */
+	HSMP_SET_NBIO_DPM_LEVEL,	/* 12h Set max/min LCLK DPM Level for a given NBIO */
+	HSMP_GET_NBIO_DPM_LEVEL,	/* 13h Get LCLK DPM level min and max for a given NBIO */
+	HSMP_GET_DDR_BANDWIDTH,		/* 14h Get theoretical maximum and current DDR Bandwidth */
+	HSMP_GET_TEMP_MONITOR,		/* 15h Get socket temperature */
+	HSMP_GET_DIMM_TEMP_RANGE,	/* 16h Get per-DIMM temperature range and refresh rate */
+	HSMP_GET_DIMM_POWER,		/* 17h Get per-DIMM power consumption */
+	HSMP_GET_DIMM_THERMAL,		/* 18h Get per-DIMM thermal sensors */
+	HSMP_GET_SOCKET_FREQ_LIMIT,	/* 19h Get current active frequency per socket */
+	HSMP_GET_CCLK_CORE_LIMIT,	/* 1Ah Get CCLK frequency limit per core */
+	HSMP_GET_RAILS_SVI,		/* 1Bh Get SVI-based Telemetry for all rails */
+	HSMP_GET_SOCKET_FMAX_FMIN,	/* 1Ch Get Fmax and Fmin per socket */
+	HSMP_GET_IOLINK_BANDWITH,	/* 1Dh Get current bandwidth on IO Link */
+	HSMP_GET_XGMI_BANDWITH,		/* 1Eh Get current bandwidth on xGMI Link */
+	HSMP_SET_GMI3_WIDTH,		/* 1Fh Set max and min GMI3 Link width */
+	HSMP_SET_PCI_RATE,		/* 20h Control link rate on PCIe devices */
+	HSMP_SET_POWER_MODE,		/* 21h Select power efficiency profile policy */
+	HSMP_SET_PSTATE_MAX_MIN,	/* 22h Set the max and min DF P-State  */
+	HSMP_MSG_ID_MAX,
+};
+
+struct hsmp_message {
+	__u32	msg_id;			/* Message ID */
+	__u16	num_args;		/* Number of input argument words in message */
+	__u16	response_sz;		/* Number of expected output/response words */
+	__u32	args[HSMP_MAX_MSG_LEN];	/* argument/response buffer */
+	__u16	sock_ind;		/* socket number */
+};
+
+enum hsmp_msg_type {
+	HSMP_RSVD = -1,
+	HSMP_SET  = 0,
+	HSMP_GET  = 1,
+};
+
+struct hsmp_msg_desc {
+	int num_args;
+	int response_sz;
+	enum hsmp_msg_type type;
+};
+
+/*
+ * User may use these comments as reference, please find the
+ * supported list of messages and message definition in the
+ * HSMP chapter of respective family/model PPR.
+ *
+ * Not supported messages would return -ENOMSG.
+ */
+static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
+	/* RESERVED */
+	{0, 0, HSMP_RSVD},
+
+	/*
+	 * HSMP_TEST, num_args = 1, response_sz = 1
+	 * input:  args[0] = xx
+	 * output: args[0] = xx + 1
+	 */
+	{1, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_SMU_VER, num_args = 0, response_sz = 1
+	 * output: args[0] = smu fw ver
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_PROTO_VER, num_args = 0, response_sz = 1
+	 * output: args[0] = proto version
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_SOCKET_POWER, num_args = 0, response_sz = 1
+	 * output: args[0] = socket power in mWatts
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_SET_SOCKET_POWER_LIMIT, num_args = 1, response_sz = 0
+	 * input: args[0] = power limit value in mWatts
+	 */
+	{1, 0, HSMP_SET},
+
+	/*
+	 * HSMP_GET_SOCKET_POWER_LIMIT, num_args = 0, response_sz = 1
+	 * output: args[0] = socket power limit value in mWatts
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_SOCKET_POWER_LIMIT_MAX, num_args = 0, response_sz = 1
+	 * output: args[0] = maximuam socket power limit in mWatts
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_SET_BOOST_LIMIT, num_args = 1, response_sz = 0
+	 * input: args[0] = apic id[31:16] + boost limit value in MHz[15:0]
+	 */
+	{1, 0, HSMP_SET},
+
+	/*
+	 * HSMP_SET_BOOST_LIMIT_SOCKET, num_args = 1, response_sz = 0
+	 * input: args[0] = boost limit value in MHz
+	 */
+	{1, 0, HSMP_SET},
+
+	/*
+	 * HSMP_GET_BOOST_LIMIT, num_args = 1, response_sz = 1
+	 * input: args[0] = apic id
+	 * output: args[0] = boost limit value in MHz
+	 */
+	{1, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_PROC_HOT, num_args = 0, response_sz = 1
+	 * output: args[0] = proc hot status
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_SET_XGMI_LINK_WIDTH, num_args = 1, response_sz = 0
+	 * input: args[0] = min link width[15:8] + max link width[7:0]
+	 */
+	{1, 0, HSMP_SET},
+
+	/*
+	 * HSMP_SET_DF_PSTATE, num_args = 1, response_sz = 0
+	 * input: args[0] = df pstate[7:0]
+	 */
+	{1, 0, HSMP_SET},
+
+	/* HSMP_SET_AUTO_DF_PSTATE, num_args = 0, response_sz = 0 */
+	{0, 0, HSMP_SET},
+
+	/*
+	 * HSMP_GET_FCLK_MCLK, num_args = 0, response_sz = 2
+	 * output: args[0] = fclk in MHz, args[1] = mclk in MHz
+	 */
+	{0, 2, HSMP_GET},
+
+	/*
+	 * HSMP_GET_CCLK_THROTTLE_LIMIT, num_args = 0, response_sz = 1
+	 * output: args[0] = core clock in MHz
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_C0_PERCENT, num_args = 0, response_sz = 1
+	 * output: args[0] = average c0 residency
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_SET_NBIO_DPM_LEVEL, num_args = 1, response_sz = 0
+	 * input: args[0] = nbioid[23:16] + max dpm level[15:8] + min dpm level[7:0]
+	 */
+	{1, 0, HSMP_SET},
+
+	/*
+	 * HSMP_GET_NBIO_DPM_LEVEL, num_args = 1, response_sz = 1
+	 * input: args[0] = nbioid[23:16]
+	 * output: args[0] = max dpm level[15:8] + min dpm level[7:0]
+	 */
+	{1, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_DDR_BANDWIDTH, num_args = 0, response_sz = 1
+	 * output: args[0] = max bw in Gbps[31:20] + utilised bw in Gbps[19:8] +
+	 * bw in percentage[7:0]
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_TEMP_MONITOR, num_args = 0, response_sz = 1
+	 * output: args[0] = temperature in degree celsius. [15:8] integer part +
+	 * [7:5] fractional part
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_DIMM_TEMP_RANGE, num_args = 1, response_sz = 1
+	 * input: args[0] = DIMM address[7:0]
+	 * output: args[0] = refresh rate[3] + temperature range[2:0]
+	 */
+	{1, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_DIMM_POWER, num_args = 1, response_sz = 1
+	 * input: args[0] = DIMM address[7:0]
+	 * output: args[0] = DIMM power in mW[31:17] + update rate in ms[16:8] +
+	 * DIMM address[7:0]
+	 */
+	{1, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_DIMM_THERMAL, num_args = 1, response_sz = 1
+	 * input: args[0] = DIMM address[7:0]
+	 * output: args[0] = temperature in degree celcius[31:21] + update rate in ms[16:8] +
+	 * DIMM address[7:0]
+	 */
+	{1, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_SOCKET_FREQ_LIMIT, num_args = 0, response_sz = 1
+	 * output: args[0] = frequency in MHz[31:16] + frequency source[15:0]
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_CCLK_CORE_LIMIT, num_args = 1, response_sz = 1
+	 * input: args[0] = apic id [31:0]
+	 * output: args[0] = frequency in MHz[31:0]
+	 */
+	{1, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_RAILS_SVI, num_args = 0, response_sz = 1
+	 * output: args[0] = power in mW[31:0]
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_SOCKET_FMAX_FMIN, num_args = 0, response_sz = 1
+	 * output: args[0] = fmax in MHz[31:16] + fmin in MHz[15:0]
+	 */
+	{0, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_IOLINK_BANDWITH, num_args = 1, response_sz = 1
+	 * input: args[0] = link id[15:8] + bw type[2:0]
+	 * output: args[0] = io bandwidth in Mbps[31:0]
+	 */
+	{1, 1, HSMP_GET},
+
+	/*
+	 * HSMP_GET_XGMI_BANDWITH, num_args = 1, response_sz = 1
+	 * input: args[0] = link id[15:8] + bw type[2:0]
+	 * output: args[0] = xgmi bandwidth in Mbps[31:0]
+	 */
+	{1, 1, HSMP_GET},
+
+	/*
+	 * HSMP_SET_GMI3_WIDTH, num_args = 1, response_sz = 0
+	 * input: args[0] = min link width[15:8] + max link width[7:0]
+	 */
+	{1, 0, HSMP_SET},
+
+	/*
+	 * HSMP_SET_PCI_RATE, num_args = 1, response_sz = 1
+	 * input: args[0] = link rate control value
+	 * output: args[0] = previous link rate control value
+	 */
+	{1, 1, HSMP_SET},
+
+	/*
+	 * HSMP_SET_POWER_MODE, num_args = 1, response_sz = 0
+	 * input: args[0] = power efficiency mode[2:0]
+	 */
+	{1, 0, HSMP_SET},
+
+	/*
+	 * HSMP_SET_PSTATE_MAX_MIN, num_args = 1, response_sz = 0
+	 * input: args[0] = min df pstate[15:8] + max df pstate[7:0]
+	 */
+	{1, 0, HSMP_SET},
+};
+
+/* Reset to default packing */
+#pragma pack()
+
+/* Define unique ioctl command for hsmp msgs using generic _IOWR */
+#define HSMP_BASE_IOCTL_NR	0xF8
+#define HSMP_IOCTL_CMD		_IOWR(HSMP_BASE_IOCTL_NR, 0, struct hsmp_message)
+
+#endif /*_ASM_X86_AMD_HSMP_H_*/
diff --git a/arch/x86/include/uapi/asm/auxvec.h b/arch/x86/include/uapi/asm/auxvec.h
new file mode 100644
index 000000000..6beb55bbe
--- /dev/null
+++ b/arch/x86/include/uapi/asm/auxvec.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_AUXVEC_H
+#define _ASM_X86_AUXVEC_H
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them, start the x86-specific ones at 32.
+ */
+#ifdef __i386__
+#define AT_SYSINFO		32
+#endif
+#define AT_SYSINFO_EHDR		33
+
+/* entries in ARCH_DLINFO: */
+#if defined(CONFIG_IA32_EMULATION) || !defined(CONFIG_X86_64)
+# define AT_VECTOR_SIZE_ARCH 3
+#else /* else it's non-compat x86-64 */
+# define AT_VECTOR_SIZE_ARCH 2
+#endif
+
+#endif /* _ASM_X86_AUXVEC_H */
diff --git a/arch/x86/include/uapi/asm/bitsperlong.h b/arch/x86/include/uapi/asm/bitsperlong.h
new file mode 100644
index 000000000..5d72c8458
--- /dev/null
+++ b/arch/x86/include/uapi/asm/bitsperlong.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_X86_BITSPERLONG_H
+#define __ASM_X86_BITSPERLONG_H
+
+#if defined(__x86_64__) && !defined(__ILP32__)
+# define __BITS_PER_LONG 64
+#else
+# define __BITS_PER_LONG 32
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* __ASM_X86_BITSPERLONG_H */
+
diff --git a/arch/x86/include/uapi/asm/boot.h b/arch/x86/include/uapi/asm/boot.h
new file mode 100644
index 000000000..88ffc5aee
--- /dev/null
+++ b/arch/x86/include/uapi/asm/boot.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_BOOT_H
+#define _UAPI_ASM_X86_BOOT_H
+
+/* Internal svga startup constants */
+#define NORMAL_VGA	0xffff		/* 80x25 mode */
+#define EXTENDED_VGA	0xfffe		/* 80x50 mode */
+#define ASK_VGA		0xfffd		/* ask for it at bootup */
+
+
+#endif /* _UAPI_ASM_X86_BOOT_H */
diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h
new file mode 100644
index 000000000..01d19fc22
--- /dev/null
+++ b/arch/x86/include/uapi/asm/bootparam.h
@@ -0,0 +1,284 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_BOOTPARAM_H
+#define _ASM_X86_BOOTPARAM_H
+
+/* setup_data/setup_indirect types */
+#define SETUP_NONE			0
+#define SETUP_E820_EXT			1
+#define SETUP_DTB			2
+#define SETUP_PCI			3
+#define SETUP_EFI			4
+#define SETUP_APPLE_PROPERTIES		5
+#define SETUP_JAILHOUSE			6
+#define SETUP_CC_BLOB			7
+#define SETUP_IMA			8
+#define SETUP_RNG_SEED			9
+#define SETUP_ENUM_MAX			SETUP_RNG_SEED
+
+#define SETUP_INDIRECT			(1<<31)
+#define SETUP_TYPE_MAX			(SETUP_ENUM_MAX | SETUP_INDIRECT)
+
+/* ram_size flags */
+#define RAMDISK_IMAGE_START_MASK	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000
+
+/* loadflags */
+#define LOADED_HIGH	(1<<0)
+#define KASLR_FLAG	(1<<1)
+#define QUIET_FLAG	(1<<5)
+#define KEEP_SEGMENTS	(1<<6)
+#define CAN_USE_HEAP	(1<<7)
+
+/* xloadflags */
+#define XLF_KERNEL_64			(1<<0)
+#define XLF_CAN_BE_LOADED_ABOVE_4G	(1<<1)
+#define XLF_EFI_HANDOVER_32		(1<<2)
+#define XLF_EFI_HANDOVER_64		(1<<3)
+#define XLF_EFI_KEXEC			(1<<4)
+#define XLF_5LEVEL			(1<<5)
+#define XLF_5LEVEL_ENABLED		(1<<6)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/screen_info.h>
+#include <linux/apm_bios.h>
+#include <linux/edd.h>
+#include <asm/ist.h>
+#include <video/edid.h>
+
+/* extensible setup data list node */
+struct setup_data {
+	__u64 next;
+	__u32 type;
+	__u32 len;
+	__u8 data[];
+};
+
+/* extensible setup indirect data node */
+struct setup_indirect {
+	__u32 type;
+	__u32 reserved;  /* Reserved, must be set to zero. */
+	__u64 len;
+	__u64 addr;
+};
+
+struct setup_header {
+	__u8	setup_sects;
+	__u16	root_flags;
+	__u32	syssize;
+	__u16	ram_size;
+	__u16	vid_mode;
+	__u16	root_dev;
+	__u16	boot_flag;
+	__u16	jump;
+	__u32	header;
+	__u16	version;
+	__u32	realmode_swtch;
+	__u16	start_sys_seg;
+	__u16	kernel_version;
+	__u8	type_of_loader;
+	__u8	loadflags;
+	__u16	setup_move_size;
+	__u32	code32_start;
+	__u32	ramdisk_image;
+	__u32	ramdisk_size;
+	__u32	bootsect_kludge;
+	__u16	heap_end_ptr;
+	__u8	ext_loader_ver;
+	__u8	ext_loader_type;
+	__u32	cmd_line_ptr;
+	__u32	initrd_addr_max;
+	__u32	kernel_alignment;
+	__u8	relocatable_kernel;
+	__u8	min_alignment;
+	__u16	xloadflags;
+	__u32	cmdline_size;
+	__u32	hardware_subarch;
+	__u64	hardware_subarch_data;
+	__u32	payload_offset;
+	__u32	payload_length;
+	__u64	setup_data;
+	__u64	pref_address;
+	__u32	init_size;
+	__u32	handover_offset;
+	__u32	kernel_info_offset;
+} __attribute__((packed));
+
+struct sys_desc_table {
+	__u16 length;
+	__u8  table[14];
+};
+
+/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
+struct olpc_ofw_header {
+	__u32 ofw_magic;	/* OFW signature */
+	__u32 ofw_version;
+	__u32 cif_handler;	/* callback into OFW */
+	__u32 irq_desc_table;
+} __attribute__((packed));
+
+struct efi_info {
+	__u32 efi_loader_signature;
+	__u32 efi_systab;
+	__u32 efi_memdesc_size;
+	__u32 efi_memdesc_version;
+	__u32 efi_memmap;
+	__u32 efi_memmap_size;
+	__u32 efi_systab_hi;
+	__u32 efi_memmap_hi;
+};
+
+/*
+ * This is the maximum number of entries in struct boot_params::e820_table
+ * (the zeropage), which is part of the x86 boot protocol ABI:
+ */
+#define E820_MAX_ENTRIES_ZEROPAGE 128
+
+/*
+ * The E820 memory region entry of the boot protocol ABI:
+ */
+struct boot_e820_entry {
+	__u64 addr;
+	__u64 size;
+	__u32 type;
+} __attribute__((packed));
+
+/*
+ * Smallest compatible version of jailhouse_setup_data required by this kernel.
+ */
+#define JAILHOUSE_SETUP_REQUIRED_VERSION	1
+
+/*
+ * The boot loader is passing platform information via this Jailhouse-specific
+ * setup data structure.
+ */
+struct jailhouse_setup_data {
+	struct {
+		__u16	version;
+		__u16	compatible_version;
+	} __attribute__((packed)) hdr;
+	struct {
+		__u16	pm_timer_address;
+		__u16	num_cpus;
+		__u64	pci_mmconfig_base;
+		__u32	tsc_khz;
+		__u32	apic_khz;
+		__u8	standard_ioapic;
+		__u8	cpu_ids[255];
+	} __attribute__((packed)) v1;
+	struct {
+		__u32	flags;
+	} __attribute__((packed)) v2;
+} __attribute__((packed));
+
+/*
+ * IMA buffer setup data information from the previous kernel during kexec
+ */
+struct ima_setup_data {
+	__u64 addr;
+	__u64 size;
+} __attribute__((packed));
+
+/* The so-called "zeropage" */
+struct boot_params {
+	struct screen_info screen_info;			/* 0x000 */
+	struct apm_bios_info apm_bios_info;		/* 0x040 */
+	__u8  _pad2[4];					/* 0x054 */
+	__u64  tboot_addr;				/* 0x058 */
+	struct ist_info ist_info;			/* 0x060 */
+	__u64 acpi_rsdp_addr;				/* 0x070 */
+	__u8  _pad3[8];					/* 0x078 */
+	__u8  hd0_info[16];	/* obsolete! */		/* 0x080 */
+	__u8  hd1_info[16];	/* obsolete! */		/* 0x090 */
+	struct sys_desc_table sys_desc_table; /* obsolete! */	/* 0x0a0 */
+	struct olpc_ofw_header olpc_ofw_header;		/* 0x0b0 */
+	__u32 ext_ramdisk_image;			/* 0x0c0 */
+	__u32 ext_ramdisk_size;				/* 0x0c4 */
+	__u32 ext_cmd_line_ptr;				/* 0x0c8 */
+	__u8  _pad4[112];				/* 0x0cc */
+	__u32 cc_blob_address;				/* 0x13c */
+	struct edid_info edid_info;			/* 0x140 */
+	struct efi_info efi_info;			/* 0x1c0 */
+	__u32 alt_mem_k;				/* 0x1e0 */
+	__u32 scratch;		/* Scratch field! */	/* 0x1e4 */
+	__u8  e820_entries;				/* 0x1e8 */
+	__u8  eddbuf_entries;				/* 0x1e9 */
+	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
+	__u8  kbd_status;				/* 0x1eb */
+	__u8  secure_boot;				/* 0x1ec */
+	__u8  _pad5[2];					/* 0x1ed */
+	/*
+	 * The sentinel is set to a nonzero value (0xff) in header.S.
+	 *
+	 * A bootloader is supposed to only take setup_header and put
+	 * it into a clean boot_params buffer. If it turns out that
+	 * it is clumsy or too generous with the buffer, it most
+	 * probably will pick up the sentinel variable too. The fact
+	 * that this variable then is still 0xff will let kernel
+	 * know that some variables in boot_params are invalid and
+	 * kernel should zero out certain portions of boot_params.
+	 */
+	__u8  sentinel;					/* 0x1ef */
+	__u8  _pad6[1];					/* 0x1f0 */
+	struct setup_header hdr;    /* setup header */	/* 0x1f1 */
+	__u8  _pad7[0x290-0x1f1-sizeof(struct setup_header)];
+	__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX];	/* 0x290 */
+	struct boot_e820_entry e820_table[E820_MAX_ENTRIES_ZEROPAGE]; /* 0x2d0 */
+	__u8  _pad8[48];				/* 0xcd0 */
+	struct edd_info eddbuf[EDDMAXNR];		/* 0xd00 */
+	__u8  _pad9[276];				/* 0xeec */
+} __attribute__((packed));
+
+/**
+ * enum x86_hardware_subarch - x86 hardware subarchitecture
+ *
+ * The x86 hardware_subarch and hardware_subarch_data were added as of the x86
+ * boot protocol 2.07 to help distinguish and support custom x86 boot
+ * sequences. This enum represents accepted values for the x86
+ * hardware_subarch.  Custom x86 boot sequences (not X86_SUBARCH_PC) do not
+ * have or simply *cannot* make use of natural stubs like BIOS or EFI, the
+ * hardware_subarch can be used on the Linux entry path to revector to a
+ * subarchitecture stub when needed. This subarchitecture stub can be used to
+ * set up Linux boot parameters or for special care to account for nonstandard
+ * handling of page tables.
+ *
+ * These enums should only ever be used by x86 code, and the code that uses
+ * it should be well contained and compartmentalized.
+ *
+ * KVM and Xen HVM do not have a subarch as these are expected to follow
+ * standard x86 boot entries. If there is a genuine need for "hypervisor" type
+ * that should be considered separately in the future. Future guest types
+ * should seriously consider working with standard x86 boot stubs such as
+ * the BIOS or EFI boot stubs.
+ *
+ * WARNING: this enum is only used for legacy hacks, for platform features that
+ *	    are not easily enumerated or discoverable. You should not ever use
+ *	    this for new features.
+ *
+ * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
+ *	PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
+ * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
+ * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
+ * 	which start at asm startup_xen() entry point and later jump to the C
+ * 	xen_start_kernel() entry point. Both domU and dom0 type of guests are
+ * 	currently supported through this PV boot path.
+ * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
+ *	systems which do not have the PCI legacy interfaces.
+ * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
+ * 	for settop boxes and media devices, the use of a subarch for CE4100
+ * 	is more of a hack...
+ */
+enum x86_hardware_subarch {
+	X86_SUBARCH_PC = 0,
+	X86_SUBARCH_LGUEST,
+	X86_SUBARCH_XEN,
+	X86_SUBARCH_INTEL_MID,
+	X86_SUBARCH_CE4100,
+	X86_NR_SUBARCHS,
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_BOOTPARAM_H */
diff --git a/arch/x86/include/uapi/asm/byteorder.h b/arch/x86/include/uapi/asm/byteorder.h
new file mode 100644
index 000000000..149143cab
--- /dev/null
+++ b/arch/x86/include/uapi/asm/byteorder.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_BYTEORDER_H
+#define _ASM_X86_BYTEORDER_H
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_X86_BYTEORDER_H */
diff --git a/arch/x86/include/uapi/asm/debugreg.h b/arch/x86/include/uapi/asm/debugreg.h
new file mode 100644
index 000000000..0007ba077
--- /dev/null
+++ b/arch/x86/include/uapi/asm/debugreg.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_DEBUGREG_H
+#define _UAPI_ASM_X86_DEBUGREG_H
+
+
+/* Indicate the register numbers for a number of the specific
+   debug registers.  Registers 0-3 contain the addresses we wish to trap on */
+#define DR_FIRSTADDR 0        /* u_debugreg[DR_FIRSTADDR] */
+#define DR_LASTADDR 3         /* u_debugreg[DR_LASTADDR]  */
+
+#define DR_STATUS 6           /* u_debugreg[DR_STATUS]     */
+#define DR_CONTROL 7          /* u_debugreg[DR_CONTROL] */
+
+/* Define a few things for the status register.  We can use this to determine
+   which debugging register was responsible for the trap.  The other bits
+   are either reserved or not of interest to us. */
+
+/* Define reserved bits in DR6 which are always set to 1 */
+#define DR6_RESERVED	(0xFFFF0FF0)
+
+#define DR_TRAP0	(0x1)		/* db0 */
+#define DR_TRAP1	(0x2)		/* db1 */
+#define DR_TRAP2	(0x4)		/* db2 */
+#define DR_TRAP3	(0x8)		/* db3 */
+#define DR_TRAP_BITS	(DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)
+
+#define DR_BUS_LOCK	(0x800)		/* bus_lock */
+#define DR_STEP		(0x4000)	/* single-step */
+#define DR_SWITCH	(0x8000)	/* task switch */
+
+/* Now define a bunch of things for manipulating the control register.
+   The top two bytes of the control register consist of 4 fields of 4
+   bits - each field corresponds to one of the four debug registers,
+   and indicates what types of access we trap on, and how large the data
+   field is that we are looking at */
+
+#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */
+#define DR_CONTROL_SIZE 4   /* 4 control bits per register */
+
+#define DR_RW_EXECUTE (0x0)   /* Settings for the access types to trap on */
+#define DR_RW_WRITE (0x1)
+#define DR_RW_READ (0x3)
+
+#define DR_LEN_1 (0x0) /* Settings for data length to trap on */
+#define DR_LEN_2 (0x4)
+#define DR_LEN_4 (0xC)
+#define DR_LEN_8 (0x8)
+
+/* The low byte to the control register determine which registers are
+   enabled.  There are 4 fields of two bits.  One bit is "local", meaning
+   that the processor will reset the bit after a task switch and the other
+   is global meaning that we have to explicitly reset the bit.  With linux,
+   you can use either one, since we explicitly zero the register when we enter
+   kernel mode. */
+
+#define DR_LOCAL_ENABLE_SHIFT 0    /* Extra shift to the local enable bit */
+#define DR_GLOBAL_ENABLE_SHIFT 1   /* Extra shift to the global enable bit */
+#define DR_LOCAL_ENABLE (0x1)      /* Local enable for reg 0 */
+#define DR_GLOBAL_ENABLE (0x2)     /* Global enable for reg 0 */
+#define DR_ENABLE_SIZE 2           /* 2 enable bits per register */
+
+#define DR_LOCAL_ENABLE_MASK (0x55)  /* Set  local bits for all 4 regs */
+#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
+
+/* The second byte to the control register has a few special things.
+   We can slow the instruction pipeline for instructions coming via the
+   gdt or the ldt if we want to.  I am not sure why this is an advantage */
+
+#ifdef __i386__
+#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */
+#else
+#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */
+#endif
+
+#define DR_LOCAL_SLOWDOWN (0x100)   /* Local slow the pipeline */
+#define DR_GLOBAL_SLOWDOWN (0x200)  /* Global slow the pipeline */
+
+/*
+ * HW breakpoint additions
+ */
+
+#endif /* _UAPI_ASM_X86_DEBUGREG_H */
diff --git a/arch/x86/include/uapi/asm/e820.h b/arch/x86/include/uapi/asm/e820.h
new file mode 100644
index 000000000..2f491efe3
--- /dev/null
+++ b/arch/x86/include/uapi/asm/e820.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_E820_H
+#define _UAPI_ASM_X86_E820_H
+#define E820MAP	0x2d0		/* our map */
+#define E820MAX	128		/* number of entries in E820MAP */
+
+/*
+ * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the
+ * constrained space in the zeropage.  If we have more nodes than
+ * that, and if we've booted off EFI firmware, then the EFI tables
+ * passed us from the EFI firmware can list more nodes.  Size our
+ * internal memory map tables to have room for these additional
+ * nodes, based on up to three entries per node for which the
+ * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT),
+ * plus E820MAX, allowing space for the possible duplicate E820
+ * entries that might need room in the same arrays, prior to the
+ * call to sanitize_e820_map() to remove duplicates.  The allowance
+ * of three memory map entries per node is "enough" entries for
+ * the initial hardware platform motivating this mechanism to make
+ * use of additional EFI map entries.  Future platforms may want
+ * to allow more than three entries per node or otherwise refine
+ * this size.
+ */
+
+#ifndef __KERNEL__
+#define E820_X_MAX E820MAX
+#endif
+
+#define E820NR	0x1e8		/* # entries in E820MAP */
+
+#define E820_RAM	1
+#define E820_RESERVED	2
+#define E820_ACPI	3
+#define E820_NVS	4
+#define E820_UNUSABLE	5
+#define E820_PMEM	7
+
+/*
+ * This is a non-standardized way to represent ADR or NVDIMM regions that
+ * persist over a reboot.  The kernel will ignore their special capabilities
+ * unless the CONFIG_X86_PMEM_LEGACY option is set.
+ *
+ * ( Note that older platforms also used 6 for the same type of memory,
+ *   but newer versions switched to 12 as 6 was assigned differently.  Some
+ *   time they will learn... )
+ */
+#define E820_PRAM	12
+
+/*
+ * reserved RAM used by kernel itself
+ * if CONFIG_INTEL_TXT is enabled, memory of this type will be
+ * included in the S3 integrity calculation and so should not include
+ * any memory that BIOS might alter over the S3 transition
+ */
+#define E820_RESERVED_KERN        128
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+struct e820entry {
+	__u64 addr;	/* start of memory segment */
+	__u64 size;	/* size of memory segment */
+	__u32 type;	/* type of memory segment */
+} __attribute__((packed));
+
+struct e820map {
+	__u32 nr_map;
+	struct e820entry map[E820_X_MAX];
+};
+
+#define ISA_START_ADDRESS	0xa0000
+#define ISA_END_ADDRESS		0x100000
+
+#define BIOS_BEGIN		0x000a0000
+#define BIOS_END		0x00100000
+
+#define BIOS_ROM_BASE		0xffe00000
+#define BIOS_ROM_END		0xffffffff
+
+#endif /* __ASSEMBLY__ */
+
+
+#endif /* _UAPI_ASM_X86_E820_H */
diff --git a/arch/x86/include/uapi/asm/hw_breakpoint.h b/arch/x86/include/uapi/asm/hw_breakpoint.h
new file mode 100644
index 000000000..6789884c7
--- /dev/null
+++ b/arch/x86/include/uapi/asm/hw_breakpoint.h
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* */
diff --git a/arch/x86/include/uapi/asm/hwcap2.h b/arch/x86/include/uapi/asm/hwcap2.h
new file mode 100644
index 000000000..054604aba
--- /dev/null
+++ b/arch/x86/include/uapi/asm/hwcap2.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_HWCAP2_H
+#define _ASM_X86_HWCAP2_H
+
+#include <linux/const.h>
+
+/* MONITOR/MWAIT enabled in Ring 3 */
+#define HWCAP2_RING3MWAIT		_BITUL(0)
+
+/* Kernel allows FSGSBASE instructions available in Ring 3 */
+#define HWCAP2_FSGSBASE			_BITUL(1)
+
+#endif
diff --git a/arch/x86/include/uapi/asm/ist.h b/arch/x86/include/uapi/asm/ist.h
new file mode 100644
index 000000000..eac5b2079
--- /dev/null
+++ b/arch/x86/include/uapi/asm/ist.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Include file for the interface to IST BIOS
+ * Copyright 2002 Andy Grover <andrew.grover@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef _UAPI_ASM_X86_IST_H
+#define _UAPI_ASM_X86_IST_H
+
+
+
+#include <linux/types.h>
+
+struct ist_info {
+	__u32 signature;
+	__u32 command;
+	__u32 event;
+	__u32 perf_level;
+};
+
+#endif /* _UAPI_ASM_X86_IST_H */
diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h
new file mode 100644
index 000000000..e48deab89
--- /dev/null
+++ b/arch/x86/include/uapi/asm/kvm.h
@@ -0,0 +1,532 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_KVM_H
+#define _ASM_X86_KVM_H
+
+/*
+ * KVM x86 specific structures and definitions
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define KVM_PIO_PAGE_OFFSET 1
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 2
+#define KVM_DIRTY_LOG_PAGE_OFFSET 64
+
+#define DE_VECTOR 0
+#define DB_VECTOR 1
+#define BP_VECTOR 3
+#define OF_VECTOR 4
+#define BR_VECTOR 5
+#define UD_VECTOR 6
+#define NM_VECTOR 7
+#define DF_VECTOR 8
+#define TS_VECTOR 10
+#define NP_VECTOR 11
+#define SS_VECTOR 12
+#define GP_VECTOR 13
+#define PF_VECTOR 14
+#define MF_VECTOR 16
+#define AC_VECTOR 17
+#define MC_VECTOR 18
+#define XM_VECTOR 19
+#define VE_VECTOR 20
+
+/* Select x86 specific features in <linux/kvm.h> */
+#define __KVM_HAVE_PIT
+#define __KVM_HAVE_IOAPIC
+#define __KVM_HAVE_IRQ_LINE
+#define __KVM_HAVE_MSI
+#define __KVM_HAVE_USER_NMI
+#define __KVM_HAVE_GUEST_DEBUG
+#define __KVM_HAVE_MSIX
+#define __KVM_HAVE_MCE
+#define __KVM_HAVE_PIT_STATE2
+#define __KVM_HAVE_XEN_HVM
+#define __KVM_HAVE_VCPU_EVENTS
+#define __KVM_HAVE_DEBUGREGS
+#define __KVM_HAVE_XSAVE
+#define __KVM_HAVE_XCRS
+#define __KVM_HAVE_READONLY_MEM
+
+/* Architectural interrupt line count. */
+#define KVM_NR_INTERRUPTS 256
+
+/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
+struct kvm_pic_state {
+	__u8 last_irr;	/* edge detection */
+	__u8 irr;		/* interrupt request register */
+	__u8 imr;		/* interrupt mask register */
+	__u8 isr;		/* interrupt service register */
+	__u8 priority_add;	/* highest irq priority */
+	__u8 irq_base;
+	__u8 read_reg_select;
+	__u8 poll;
+	__u8 special_mask;
+	__u8 init_state;
+	__u8 auto_eoi;
+	__u8 rotate_on_auto_eoi;
+	__u8 special_fully_nested_mode;
+	__u8 init4;		/* true if 4 byte init */
+	__u8 elcr;		/* PIIX edge/trigger selection */
+	__u8 elcr_mask;
+};
+
+#define KVM_IOAPIC_NUM_PINS  24
+struct kvm_ioapic_state {
+	__u64 base_address;
+	__u32 ioregsel;
+	__u32 id;
+	__u32 irr;
+	__u32 pad;
+	union {
+		__u64 bits;
+		struct {
+			__u8 vector;
+			__u8 delivery_mode:3;
+			__u8 dest_mode:1;
+			__u8 delivery_status:1;
+			__u8 polarity:1;
+			__u8 remote_irr:1;
+			__u8 trig_mode:1;
+			__u8 mask:1;
+			__u8 reserve:7;
+			__u8 reserved[4];
+			__u8 dest_id;
+		} fields;
+	} redirtbl[KVM_IOAPIC_NUM_PINS];
+};
+
+#define KVM_IRQCHIP_PIC_MASTER   0
+#define KVM_IRQCHIP_PIC_SLAVE    1
+#define KVM_IRQCHIP_IOAPIC       2
+#define KVM_NR_IRQCHIPS          3
+
+#define KVM_RUN_X86_SMM		 (1 << 0)
+#define KVM_RUN_X86_BUS_LOCK     (1 << 1)
+
+/* for KVM_GET_REGS and KVM_SET_REGS */
+struct kvm_regs {
+	/* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+	__u64 rax, rbx, rcx, rdx;
+	__u64 rsi, rdi, rsp, rbp;
+	__u64 r8,  r9,  r10, r11;
+	__u64 r12, r13, r14, r15;
+	__u64 rip, rflags;
+};
+
+/* for KVM_GET_LAPIC and KVM_SET_LAPIC */
+#define KVM_APIC_REG_SIZE 0x400
+struct kvm_lapic_state {
+	char regs[KVM_APIC_REG_SIZE];
+};
+
+struct kvm_segment {
+	__u64 base;
+	__u32 limit;
+	__u16 selector;
+	__u8  type;
+	__u8  present, dpl, db, s, l, g, avl;
+	__u8  unusable;
+	__u8  padding;
+};
+
+struct kvm_dtable {
+	__u64 base;
+	__u16 limit;
+	__u16 padding[3];
+};
+
+
+/* for KVM_GET_SREGS and KVM_SET_SREGS */
+struct kvm_sregs {
+	/* out (KVM_GET_SREGS) / in (KVM_SET_SREGS) */
+	struct kvm_segment cs, ds, es, fs, gs, ss;
+	struct kvm_segment tr, ldt;
+	struct kvm_dtable gdt, idt;
+	__u64 cr0, cr2, cr3, cr4, cr8;
+	__u64 efer;
+	__u64 apic_base;
+	__u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
+};
+
+struct kvm_sregs2 {
+	/* out (KVM_GET_SREGS2) / in (KVM_SET_SREGS2) */
+	struct kvm_segment cs, ds, es, fs, gs, ss;
+	struct kvm_segment tr, ldt;
+	struct kvm_dtable gdt, idt;
+	__u64 cr0, cr2, cr3, cr4, cr8;
+	__u64 efer;
+	__u64 apic_base;
+	__u64 flags;
+	__u64 pdptrs[4];
+};
+#define KVM_SREGS2_FLAGS_PDPTRS_VALID 1
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+	__u8  fpr[8][16];
+	__u16 fcw;
+	__u16 fsw;
+	__u8  ftwx;  /* in fxsave format */
+	__u8  pad1;
+	__u16 last_opcode;
+	__u64 last_ip;
+	__u64 last_dp;
+	__u8  xmm[16][16];
+	__u32 mxcsr;
+	__u32 pad2;
+};
+
+struct kvm_msr_entry {
+	__u32 index;
+	__u32 reserved;
+	__u64 data;
+};
+
+/* for KVM_GET_MSRS and KVM_SET_MSRS */
+struct kvm_msrs {
+	__u32 nmsrs; /* number of msrs in entries */
+	__u32 pad;
+
+	struct kvm_msr_entry entries[];
+};
+
+/* for KVM_GET_MSR_INDEX_LIST */
+struct kvm_msr_list {
+	__u32 nmsrs; /* number of msrs in entries */
+	__u32 indices[];
+};
+
+/* Maximum size of any access bitmap in bytes */
+#define KVM_MSR_FILTER_MAX_BITMAP_SIZE 0x600
+
+/* for KVM_X86_SET_MSR_FILTER */
+struct kvm_msr_filter_range {
+#define KVM_MSR_FILTER_READ  (1 << 0)
+#define KVM_MSR_FILTER_WRITE (1 << 1)
+#define KVM_MSR_FILTER_RANGE_VALID_MASK (KVM_MSR_FILTER_READ | \
+					 KVM_MSR_FILTER_WRITE)
+	__u32 flags;
+	__u32 nmsrs; /* number of msrs in bitmap */
+	__u32 base;  /* MSR index the bitmap starts at */
+	__u8 *bitmap; /* a 1 bit allows the operations in flags, 0 denies */
+};
+
+#define KVM_MSR_FILTER_MAX_RANGES 16
+struct kvm_msr_filter {
+#ifndef __KERNEL__
+#define KVM_MSR_FILTER_DEFAULT_ALLOW (0 << 0)
+#endif
+#define KVM_MSR_FILTER_DEFAULT_DENY  (1 << 0)
+#define KVM_MSR_FILTER_VALID_MASK (KVM_MSR_FILTER_DEFAULT_DENY)
+	__u32 flags;
+	struct kvm_msr_filter_range ranges[KVM_MSR_FILTER_MAX_RANGES];
+};
+
+struct kvm_cpuid_entry {
+	__u32 function;
+	__u32 eax;
+	__u32 ebx;
+	__u32 ecx;
+	__u32 edx;
+	__u32 padding;
+};
+
+/* for KVM_SET_CPUID */
+struct kvm_cpuid {
+	__u32 nent;
+	__u32 padding;
+	struct kvm_cpuid_entry entries[];
+};
+
+struct kvm_cpuid_entry2 {
+	__u32 function;
+	__u32 index;
+	__u32 flags;
+	__u32 eax;
+	__u32 ebx;
+	__u32 ecx;
+	__u32 edx;
+	__u32 padding[3];
+};
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX		(1 << 0)
+#define KVM_CPUID_FLAG_STATEFUL_FUNC		(1 << 1)
+#define KVM_CPUID_FLAG_STATE_READ_NEXT		(1 << 2)
+
+/* for KVM_SET_CPUID2 */
+struct kvm_cpuid2 {
+	__u32 nent;
+	__u32 padding;
+	struct kvm_cpuid_entry2 entries[];
+};
+
+/* for KVM_GET_PIT and KVM_SET_PIT */
+struct kvm_pit_channel_state {
+	__u32 count; /* can be 65536 */
+	__u16 latched_count;
+	__u8 count_latched;
+	__u8 status_latched;
+	__u8 status;
+	__u8 read_state;
+	__u8 write_state;
+	__u8 write_latch;
+	__u8 rw_mode;
+	__u8 mode;
+	__u8 bcd;
+	__u8 gate;
+	__s64 count_load_time;
+};
+
+struct kvm_debug_exit_arch {
+	__u32 exception;
+	__u32 pad;
+	__u64 pc;
+	__u64 dr6;
+	__u64 dr7;
+};
+
+#define KVM_GUESTDBG_USE_SW_BP		0x00010000
+#define KVM_GUESTDBG_USE_HW_BP		0x00020000
+#define KVM_GUESTDBG_INJECT_DB		0x00040000
+#define KVM_GUESTDBG_INJECT_BP		0x00080000
+#define KVM_GUESTDBG_BLOCKIRQ		0x00100000
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+	__u64 debugreg[8];
+};
+
+struct kvm_pit_state {
+	struct kvm_pit_channel_state channels[3];
+};
+
+#define KVM_PIT_FLAGS_HPET_LEGACY     0x00000001
+#define KVM_PIT_FLAGS_SPEAKER_DATA_ON 0x00000002
+
+struct kvm_pit_state2 {
+	struct kvm_pit_channel_state channels[3];
+	__u32 flags;
+	__u32 reserved[9];
+};
+
+struct kvm_reinject_control {
+	__u8 pit_reinject;
+	__u8 reserved[31];
+};
+
+/* When set in flags, include corresponding fields on KVM_SET_VCPU_EVENTS */
+#define KVM_VCPUEVENT_VALID_NMI_PENDING	0x00000001
+#define KVM_VCPUEVENT_VALID_SIPI_VECTOR	0x00000002
+#define KVM_VCPUEVENT_VALID_SHADOW	0x00000004
+#define KVM_VCPUEVENT_VALID_SMM		0x00000008
+#define KVM_VCPUEVENT_VALID_PAYLOAD	0x00000010
+#define KVM_VCPUEVENT_VALID_TRIPLE_FAULT	0x00000020
+
+/* Interrupt shadow states */
+#define KVM_X86_SHADOW_INT_MOV_SS	0x01
+#define KVM_X86_SHADOW_INT_STI		0x02
+
+/* for KVM_GET/SET_VCPU_EVENTS */
+struct kvm_vcpu_events {
+	struct {
+		__u8 injected;
+		__u8 nr;
+		__u8 has_error_code;
+		__u8 pending;
+		__u32 error_code;
+	} exception;
+	struct {
+		__u8 injected;
+		__u8 nr;
+		__u8 soft;
+		__u8 shadow;
+	} interrupt;
+	struct {
+		__u8 injected;
+		__u8 pending;
+		__u8 masked;
+		__u8 pad;
+	} nmi;
+	__u32 sipi_vector;
+	__u32 flags;
+	struct {
+		__u8 smm;
+		__u8 pending;
+		__u8 smm_inside_nmi;
+		__u8 latched_init;
+	} smi;
+	struct {
+		__u8 pending;
+	} triple_fault;
+	__u8 reserved[26];
+	__u8 exception_has_payload;
+	__u64 exception_payload;
+};
+
+/* for KVM_GET/SET_DEBUGREGS */
+struct kvm_debugregs {
+	__u64 db[4];
+	__u64 dr6;
+	__u64 dr7;
+	__u64 flags;
+	__u64 reserved[9];
+};
+
+/* for KVM_CAP_XSAVE and KVM_CAP_XSAVE2 */
+struct kvm_xsave {
+	/*
+	 * KVM_GET_XSAVE2 and KVM_SET_XSAVE write and read as many bytes
+	 * as are returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2)
+	 * respectively, when invoked on the vm file descriptor.
+	 *
+	 * The size value returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2)
+	 * will always be at least 4096. Currently, it is only greater
+	 * than 4096 if a dynamic feature has been enabled with
+	 * ``arch_prctl()``, but this may change in the future.
+	 *
+	 * The offsets of the state save areas in struct kvm_xsave follow
+	 * the contents of CPUID leaf 0xD on the host.
+	 */
+	__u32 region[1024];
+	__u32 extra[];
+};
+
+#define KVM_MAX_XCRS	16
+
+struct kvm_xcr {
+	__u32 xcr;
+	__u32 reserved;
+	__u64 value;
+};
+
+struct kvm_xcrs {
+	__u32 nr_xcrs;
+	__u32 flags;
+	struct kvm_xcr xcrs[KVM_MAX_XCRS];
+	__u64 padding[16];
+};
+
+#define KVM_SYNC_X86_REGS      (1UL << 0)
+#define KVM_SYNC_X86_SREGS     (1UL << 1)
+#define KVM_SYNC_X86_EVENTS    (1UL << 2)
+
+#define KVM_SYNC_X86_VALID_FIELDS \
+	(KVM_SYNC_X86_REGS| \
+	 KVM_SYNC_X86_SREGS| \
+	 KVM_SYNC_X86_EVENTS)
+
+/* kvm_sync_regs struct included by kvm_run struct */
+struct kvm_sync_regs {
+	/* Members of this structure are potentially malicious.
+	 * Care must be taken by code reading, esp. interpreting,
+	 * data fields from them inside KVM to prevent TOCTOU and
+	 * double-fetch types of vulnerabilities.
+	 */
+	struct kvm_regs regs;
+	struct kvm_sregs sregs;
+	struct kvm_vcpu_events events;
+};
+
+#define KVM_X86_QUIRK_LINT0_REENABLED		(1 << 0)
+#define KVM_X86_QUIRK_CD_NW_CLEARED		(1 << 1)
+#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE		(1 << 2)
+#define KVM_X86_QUIRK_OUT_7E_INC_RIP		(1 << 3)
+#define KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT	(1 << 4)
+#define KVM_X86_QUIRK_FIX_HYPERCALL_INSN	(1 << 5)
+#define KVM_X86_QUIRK_MWAIT_NEVER_UD_FAULTS	(1 << 6)
+
+#define KVM_STATE_NESTED_FORMAT_VMX	0
+#define KVM_STATE_NESTED_FORMAT_SVM	1
+
+#define KVM_STATE_NESTED_GUEST_MODE	0x00000001
+#define KVM_STATE_NESTED_RUN_PENDING	0x00000002
+#define KVM_STATE_NESTED_EVMCS		0x00000004
+#define KVM_STATE_NESTED_MTF_PENDING	0x00000008
+#define KVM_STATE_NESTED_GIF_SET	0x00000100
+
+#define KVM_STATE_NESTED_SMM_GUEST_MODE	0x00000001
+#define KVM_STATE_NESTED_SMM_VMXON	0x00000002
+
+#define KVM_STATE_NESTED_VMX_VMCS_SIZE	0x1000
+
+#define KVM_STATE_NESTED_SVM_VMCB_SIZE	0x1000
+
+#define KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE	0x00000001
+
+/* attributes for system fd (group 0) */
+#define KVM_X86_XCOMP_GUEST_SUPP	0
+
+struct kvm_vmx_nested_state_data {
+	__u8 vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE];
+	__u8 shadow_vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE];
+};
+
+struct kvm_vmx_nested_state_hdr {
+	__u64 vmxon_pa;
+	__u64 vmcs12_pa;
+
+	struct {
+		__u16 flags;
+	} smm;
+
+	__u16 pad;
+
+	__u32 flags;
+	__u64 preemption_timer_deadline;
+};
+
+struct kvm_svm_nested_state_data {
+	/* Save area only used if KVM_STATE_NESTED_RUN_PENDING.  */
+	__u8 vmcb12[KVM_STATE_NESTED_SVM_VMCB_SIZE];
+};
+
+struct kvm_svm_nested_state_hdr {
+	__u64 vmcb_pa;
+};
+
+/* for KVM_CAP_NESTED_STATE */
+struct kvm_nested_state {
+	__u16 flags;
+	__u16 format;
+	__u32 size;
+
+	union {
+		struct kvm_vmx_nested_state_hdr vmx;
+		struct kvm_svm_nested_state_hdr svm;
+
+		/* Pad the header to 128 bytes.  */
+		__u8 pad[120];
+	} hdr;
+
+	/*
+	 * Define data region as 0 bytes to preserve backwards-compatability
+	 * to old definition of kvm_nested_state in order to avoid changing
+	 * KVM_{GET,PUT}_NESTED_STATE ioctl values.
+	 */
+	union {
+		struct kvm_vmx_nested_state_data vmx[0];
+		struct kvm_svm_nested_state_data svm[0];
+	} data;
+};
+
+/* for KVM_CAP_PMU_EVENT_FILTER */
+struct kvm_pmu_event_filter {
+	__u32 action;
+	__u32 nevents;
+	__u32 fixed_counter_bitmap;
+	__u32 flags;
+	__u32 pad[4];
+	__u64 events[];
+};
+
+#define KVM_PMU_EVENT_ALLOW 0
+#define KVM_PMU_EVENT_DENY 1
+
+/* for KVM_{GET,SET,HAS}_DEVICE_ATTR */
+#define KVM_VCPU_TSC_CTRL 0 /* control group for the timestamp counter (TSC) */
+#define   KVM_VCPU_TSC_OFFSET 0 /* attribute for the TSC offset */
+
+#endif /* _ASM_X86_KVM_H */
diff --git a/arch/x86/include/uapi/asm/kvm_para.h b/arch/x86/include/uapi/asm/kvm_para.h
new file mode 100644
index 000000000..6e64b27b2
--- /dev/null
+++ b/arch/x86/include/uapi/asm/kvm_para.h
@@ -0,0 +1,153 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_KVM_PARA_H
+#define _UAPI_ASM_X86_KVM_PARA_H
+
+#include <linux/types.h>
+
+/* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx.  It
+ * should be used to determine that a VM is running under KVM.
+ */
+#define KVM_CPUID_SIGNATURE	0x40000000
+#define KVM_SIGNATURE "KVMKVMKVM\0\0\0"
+
+/* This CPUID returns two feature bitmaps in eax, edx. Before enabling
+ * a particular paravirtualization, the appropriate feature bit should
+ * be checked in eax. The performance hint feature bit should be checked
+ * in edx.
+ */
+#define KVM_CPUID_FEATURES	0x40000001
+#define KVM_FEATURE_CLOCKSOURCE		0
+#define KVM_FEATURE_NOP_IO_DELAY	1
+#define KVM_FEATURE_MMU_OP		2
+/* This indicates that the new set of kvmclock msrs
+ * are available. The use of 0x11 and 0x12 is deprecated
+ */
+#define KVM_FEATURE_CLOCKSOURCE2        3
+#define KVM_FEATURE_ASYNC_PF		4
+#define KVM_FEATURE_STEAL_TIME		5
+#define KVM_FEATURE_PV_EOI		6
+#define KVM_FEATURE_PV_UNHALT		7
+#define KVM_FEATURE_PV_TLB_FLUSH	9
+#define KVM_FEATURE_ASYNC_PF_VMEXIT	10
+#define KVM_FEATURE_PV_SEND_IPI	11
+#define KVM_FEATURE_POLL_CONTROL	12
+#define KVM_FEATURE_PV_SCHED_YIELD	13
+#define KVM_FEATURE_ASYNC_PF_INT	14
+#define KVM_FEATURE_MSI_EXT_DEST_ID	15
+#define KVM_FEATURE_HC_MAP_GPA_RANGE	16
+#define KVM_FEATURE_MIGRATION_CONTROL	17
+
+#define KVM_HINTS_REALTIME      0
+
+/* The last 8 bits are used to indicate how to interpret the flags field
+ * in pvclock structure. If no bits are set, all flags are ignored.
+ */
+#define KVM_FEATURE_CLOCKSOURCE_STABLE_BIT	24
+
+#define MSR_KVM_WALL_CLOCK  0x11
+#define MSR_KVM_SYSTEM_TIME 0x12
+
+#define KVM_MSR_ENABLED 1
+/* Custom MSRs falls in the range 0x4b564d00-0x4b564dff */
+#define MSR_KVM_WALL_CLOCK_NEW  0x4b564d00
+#define MSR_KVM_SYSTEM_TIME_NEW 0x4b564d01
+#define MSR_KVM_ASYNC_PF_EN 0x4b564d02
+#define MSR_KVM_STEAL_TIME  0x4b564d03
+#define MSR_KVM_PV_EOI_EN      0x4b564d04
+#define MSR_KVM_POLL_CONTROL	0x4b564d05
+#define MSR_KVM_ASYNC_PF_INT	0x4b564d06
+#define MSR_KVM_ASYNC_PF_ACK	0x4b564d07
+#define MSR_KVM_MIGRATION_CONTROL	0x4b564d08
+
+struct kvm_steal_time {
+	__u64 steal;
+	__u32 version;
+	__u32 flags;
+	__u8  preempted;
+	__u8  u8_pad[3];
+	__u32 pad[11];
+};
+
+#define KVM_VCPU_PREEMPTED          (1 << 0)
+#define KVM_VCPU_FLUSH_TLB          (1 << 1)
+
+#define KVM_CLOCK_PAIRING_WALLCLOCK 0
+struct kvm_clock_pairing {
+	__s64 sec;
+	__s64 nsec;
+	__u64 tsc;
+	__u32 flags;
+	__u32 pad[9];
+};
+
+#define KVM_STEAL_ALIGNMENT_BITS 5
+#define KVM_STEAL_VALID_BITS ((-1ULL << (KVM_STEAL_ALIGNMENT_BITS + 1)))
+#define KVM_STEAL_RESERVED_MASK (((1 << KVM_STEAL_ALIGNMENT_BITS) - 1 ) << 1)
+
+#define KVM_MAX_MMU_OP_BATCH           32
+
+#define KVM_ASYNC_PF_ENABLED			(1 << 0)
+#define KVM_ASYNC_PF_SEND_ALWAYS		(1 << 1)
+#define KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT	(1 << 2)
+#define KVM_ASYNC_PF_DELIVERY_AS_INT		(1 << 3)
+
+/* MSR_KVM_ASYNC_PF_INT */
+#define KVM_ASYNC_PF_VEC_MASK			GENMASK(7, 0)
+
+/* MSR_KVM_MIGRATION_CONTROL */
+#define KVM_MIGRATION_READY		(1 << 0)
+
+/* KVM_HC_MAP_GPA_RANGE */
+#define KVM_MAP_GPA_RANGE_PAGE_SZ_4K	0
+#define KVM_MAP_GPA_RANGE_PAGE_SZ_2M	(1 << 0)
+#define KVM_MAP_GPA_RANGE_PAGE_SZ_1G	(1 << 1)
+#define KVM_MAP_GPA_RANGE_ENC_STAT(n)	(n << 4)
+#define KVM_MAP_GPA_RANGE_ENCRYPTED	KVM_MAP_GPA_RANGE_ENC_STAT(1)
+#define KVM_MAP_GPA_RANGE_DECRYPTED	KVM_MAP_GPA_RANGE_ENC_STAT(0)
+
+/* Operations for KVM_HC_MMU_OP */
+#define KVM_MMU_OP_WRITE_PTE            1
+#define KVM_MMU_OP_FLUSH_TLB	        2
+#define KVM_MMU_OP_RELEASE_PT	        3
+
+/* Payload for KVM_HC_MMU_OP */
+struct kvm_mmu_op_header {
+	__u32 op;
+	__u32 pad;
+};
+
+struct kvm_mmu_op_write_pte {
+	struct kvm_mmu_op_header header;
+	__u64 pte_phys;
+	__u64 pte_val;
+};
+
+struct kvm_mmu_op_flush_tlb {
+	struct kvm_mmu_op_header header;
+};
+
+struct kvm_mmu_op_release_pt {
+	struct kvm_mmu_op_header header;
+	__u64 pt_phys;
+};
+
+#define KVM_PV_REASON_PAGE_NOT_PRESENT 1
+#define KVM_PV_REASON_PAGE_READY 2
+
+struct kvm_vcpu_pv_apf_data {
+	/* Used for 'page not present' events delivered via #PF */
+	__u32 flags;
+
+	/* Used for 'page ready' events delivered via interrupt notification */
+	__u32 token;
+
+	__u8 pad[56];
+	__u32 enabled;
+};
+
+#define KVM_PV_EOI_BIT 0
+#define KVM_PV_EOI_MASK (0x1 << KVM_PV_EOI_BIT)
+#define KVM_PV_EOI_ENABLED KVM_PV_EOI_MASK
+#define KVM_PV_EOI_DISABLED 0x0
+
+#endif /* _UAPI_ASM_X86_KVM_PARA_H */
diff --git a/arch/x86/include/uapi/asm/kvm_perf.h b/arch/x86/include/uapi/asm/kvm_perf.h
new file mode 100644
index 000000000..125cf5cdf
--- /dev/null
+++ b/arch/x86/include/uapi/asm/kvm_perf.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_KVM_PERF_H
+#define _ASM_X86_KVM_PERF_H
+
+#include <asm/svm.h>
+#include <asm/vmx.h>
+#include <asm/kvm.h>
+
+#define DECODE_STR_LEN 20
+
+#define VCPU_ID "vcpu_id"
+
+#define KVM_ENTRY_TRACE "kvm:kvm_entry"
+#define KVM_EXIT_TRACE "kvm:kvm_exit"
+#define KVM_EXIT_REASON "exit_reason"
+
+#endif /* _ASM_X86_KVM_PERF_H */
diff --git a/arch/x86/include/uapi/asm/ldt.h b/arch/x86/include/uapi/asm/ldt.h
new file mode 100644
index 000000000..d62ac5db0
--- /dev/null
+++ b/arch/x86/include/uapi/asm/ldt.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * ldt.h
+ *
+ * Definitions of structures used with the modify_ldt system call.
+ */
+#ifndef _ASM_X86_LDT_H
+#define _ASM_X86_LDT_H
+
+/* Maximum number of LDT entries supported. */
+#define LDT_ENTRIES	8192
+/* The size of each LDT entry. */
+#define LDT_ENTRY_SIZE	8
+
+#ifndef __ASSEMBLY__
+/*
+ * Note on 64bit base and limit is ignored and you cannot set DS/ES/CS
+ * not to the default values if you still want to do syscalls. This
+ * call is more for 32bit mode therefore.
+ */
+struct user_desc {
+	unsigned int  entry_number;
+	unsigned int  base_addr;
+	unsigned int  limit;
+	unsigned int  seg_32bit:1;
+	unsigned int  contents:2;
+	unsigned int  read_exec_only:1;
+	unsigned int  limit_in_pages:1;
+	unsigned int  seg_not_present:1;
+	unsigned int  useable:1;
+#ifdef __x86_64__
+	/*
+	 * Because this bit is not present in 32-bit user code, user
+	 * programs can pass uninitialized values here.  Therefore, in
+	 * any context in which a user_desc comes from a 32-bit program,
+	 * the kernel must act as though lm == 0, regardless of the
+	 * actual value.
+	 */
+	unsigned int  lm:1;
+#endif
+};
+
+#define MODIFY_LDT_CONTENTS_DATA	0
+#define MODIFY_LDT_CONTENTS_STACK	1
+#define MODIFY_LDT_CONTENTS_CODE	2
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_X86_LDT_H */
diff --git a/arch/x86/include/uapi/asm/mce.h b/arch/x86/include/uapi/asm/mce.h
new file mode 100644
index 000000000..db9adc081
--- /dev/null
+++ b/arch/x86/include/uapi/asm/mce.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_MCE_H
+#define _UAPI_ASM_X86_MCE_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * Fields are zero when not available. Also, this struct is shared with
+ * userspace mcelog and thus must keep existing fields at current offsets.
+ * Only add new fields to the end of the structure
+ */
+struct mce {
+	__u64 status;		/* Bank's MCi_STATUS MSR */
+	__u64 misc;		/* Bank's MCi_MISC MSR */
+	__u64 addr;		/* Bank's MCi_ADDR MSR */
+	__u64 mcgstatus;	/* Machine Check Global Status MSR */
+	__u64 ip;		/* Instruction Pointer when the error happened */
+	__u64 tsc;		/* CPU time stamp counter */
+	__u64 time;		/* Wall time_t when error was detected */
+	__u8  cpuvendor;	/* Kernel's X86_VENDOR enum */
+	__u8  inject_flags;	/* Software inject flags */
+	__u8  severity;		/* Error severity */
+	__u8  pad;
+	__u32 cpuid;		/* CPUID 1 EAX */
+	__u8  cs;		/* Code segment */
+	__u8  bank;		/* Machine check bank reporting the error */
+	__u8  cpu;		/* CPU number; obsoleted by extcpu */
+	__u8  finished;		/* Entry is valid */
+	__u32 extcpu;		/* Linux CPU number that detected the error */
+	__u32 socketid;		/* CPU socket ID */
+	__u32 apicid;		/* CPU initial APIC ID */
+	__u64 mcgcap;		/* MCGCAP MSR: machine check capabilities of CPU */
+	__u64 synd;		/* MCA_SYND MSR: only valid on SMCA systems */
+	__u64 ipid;		/* MCA_IPID MSR: only valid on SMCA systems */
+	__u64 ppin;		/* Protected Processor Inventory Number */
+	__u32 microcode;	/* Microcode revision */
+	__u64 kflags;		/* Internal kernel use */
+};
+
+#define MCE_GET_RECORD_LEN   _IOR('M', 1, int)
+#define MCE_GET_LOG_LEN      _IOR('M', 2, int)
+#define MCE_GETCLEAR_FLAGS   _IOR('M', 3, int)
+
+#endif /* _UAPI_ASM_X86_MCE_H */
diff --git a/arch/x86/include/uapi/asm/mman.h b/arch/x86/include/uapi/asm/mman.h
new file mode 100644
index 000000000..775dbd3af
--- /dev/null
+++ b/arch/x86/include/uapi/asm/mman.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_MMAN_H
+#define _ASM_X86_MMAN_H
+
+#define MAP_32BIT	0x40		/* only give out 32bit addresses */
+
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+#define arch_calc_vm_prot_bits(prot, key) (		\
+		((key) & 0x1 ? VM_PKEY_BIT0 : 0) |      \
+		((key) & 0x2 ? VM_PKEY_BIT1 : 0) |      \
+		((key) & 0x4 ? VM_PKEY_BIT2 : 0) |      \
+		((key) & 0x8 ? VM_PKEY_BIT3 : 0))
+#endif
+
+#include <asm-generic/mman.h>
+
+#endif /* _ASM_X86_MMAN_H */
diff --git a/arch/x86/include/uapi/asm/msgbuf.h b/arch/x86/include/uapi/asm/msgbuf.h
new file mode 100644
index 000000000..ac83e25bb
--- /dev/null
+++ b/arch/x86/include/uapi/asm/msgbuf.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_X64_MSGBUF_H
+#define __ASM_X64_MSGBUF_H
+
+#if !defined(__x86_64__) || !defined(__ILP32__)
+#include <asm-generic/msgbuf.h>
+#else
+
+#include <asm/ipcbuf.h>
+
+/*
+ * The msqid64_ds structure for x86 architecture with x32 ABI.
+ *
+ * On x86-32 and x86-64 we can just use the generic definition, but
+ * x32 uses the same binary layout as x86_64, which is different
+ * from other 32-bit architectures.
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_long_t msg_stime;	/* last msgsnd time */
+	__kernel_long_t msg_rtime;	/* last msgrcv time */
+	__kernel_long_t msg_ctime;	/* last change time */
+	__kernel_ulong_t msg_cbytes;	/* current number of bytes on queue */
+	__kernel_ulong_t msg_qnum;	/* number of messages in queue */
+	__kernel_ulong_t msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	__kernel_ulong_t __unused4;
+	__kernel_ulong_t __unused5;
+};
+
+#endif
+
+#endif /* __ASM_GENERIC_MSGBUF_H */
diff --git a/arch/x86/include/uapi/asm/msr.h b/arch/x86/include/uapi/asm/msr.h
new file mode 100644
index 000000000..e7516b402
--- /dev/null
+++ b/arch/x86/include/uapi/asm/msr.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_MSR_H
+#define _UAPI_ASM_X86_MSR_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define X86_IOC_RDMSR_REGS	_IOWR('c', 0xA0, __u32[8])
+#define X86_IOC_WRMSR_REGS	_IOWR('c', 0xA1, __u32[8])
+
+#endif /* __ASSEMBLY__ */
+#endif /* _UAPI_ASM_X86_MSR_H */
diff --git a/arch/x86/include/uapi/asm/mtrr.h b/arch/x86/include/uapi/asm/mtrr.h
new file mode 100644
index 000000000..376563f2b
--- /dev/null
+++ b/arch/x86/include/uapi/asm/mtrr.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: LGPL-2.0+ WITH Linux-syscall-note */
+/*  Generic MTRR (Memory Type Range Register) ioctls.
+
+    Copyright (C) 1997-1999  Richard Gooch
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Library General Public
+    License as published by the Free Software Foundation; either
+    version 2 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Library General Public License for more details.
+
+    You should have received a copy of the GNU Library General Public
+    License along with this library; if not, write to the Free
+    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Richard Gooch may be reached by email at  rgooch@atnf.csiro.au
+    The postal address is:
+      Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
+*/
+#ifndef _UAPI_ASM_X86_MTRR_H
+#define _UAPI_ASM_X86_MTRR_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/errno.h>
+
+#define	MTRR_IOCTL_BASE	'M'
+
+/* Warning: this structure has a different order from i386
+   on x86-64. The 32bit emulation code takes care of that.
+   But you need to use this for 64bit, otherwise your X server
+   will break. */
+
+#ifdef __i386__
+struct mtrr_sentry {
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int type;     /*  Type of region   */
+};
+
+struct mtrr_gentry {
+    unsigned int regnum;   /*  Register number  */
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int type;     /*  Type of region   */
+};
+
+#else /* __i386__ */
+
+struct mtrr_sentry {
+	__u64 base;		/*  Base address     */
+	__u32 size;		/*  Size of region   */
+	__u32 type;		/*  Type of region   */
+};
+
+struct mtrr_gentry {
+	__u64 base;		/*  Base address     */
+	__u32 size;		/*  Size of region   */
+	__u32 regnum;		/*  Register number  */
+	__u32 type;		/*  Type of region   */
+	__u32 _pad;		/*  Unused	     */
+};
+
+#endif /* !__i386__ */
+
+struct mtrr_var_range {
+	__u32 base_lo;
+	__u32 base_hi;
+	__u32 mask_lo;
+	__u32 mask_hi;
+};
+
+/* In the Intel processor's MTRR interface, the MTRR type is always held in
+   an 8 bit field: */
+typedef __u8 mtrr_type;
+
+#define MTRR_NUM_FIXED_RANGES 88
+#define MTRR_MAX_VAR_RANGES 256
+
+struct mtrr_state_type {
+	struct mtrr_var_range var_ranges[MTRR_MAX_VAR_RANGES];
+	mtrr_type fixed_ranges[MTRR_NUM_FIXED_RANGES];
+	unsigned char enabled;
+	unsigned char have_fixed;
+	mtrr_type def_type;
+};
+
+#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
+#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
+
+/*  These are the various ioctls  */
+#define MTRRIOC_ADD_ENTRY        _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry)
+#define MTRRIOC_SET_ENTRY        _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry)
+#define MTRRIOC_DEL_ENTRY        _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry)
+#define MTRRIOC_GET_ENTRY        _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry)
+#define MTRRIOC_KILL_ENTRY       _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry)
+#define MTRRIOC_ADD_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry)
+#define MTRRIOC_SET_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry)
+#define MTRRIOC_DEL_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry)
+#define MTRRIOC_GET_PAGE_ENTRY   _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry)
+#define MTRRIOC_KILL_PAGE_ENTRY  _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry)
+
+/* MTRR memory types, which are defined in SDM */
+#define MTRR_TYPE_UNCACHABLE 0
+#define MTRR_TYPE_WRCOMB     1
+/*#define MTRR_TYPE_         2*/
+/*#define MTRR_TYPE_         3*/
+#define MTRR_TYPE_WRTHROUGH  4
+#define MTRR_TYPE_WRPROT     5
+#define MTRR_TYPE_WRBACK     6
+#define MTRR_NUM_TYPES       7
+
+/*
+ * Invalid MTRR memory type.  mtrr_type_lookup() returns this value when
+ * MTRRs are disabled.  Note, this value is allocated from the reserved
+ * values (0x7-0xff) of the MTRR memory types.
+ */
+#define MTRR_TYPE_INVALID    0xff
+
+#endif /* _UAPI_ASM_X86_MTRR_H */
diff --git a/arch/x86/include/uapi/asm/perf_regs.h b/arch/x86/include/uapi/asm/perf_regs.h
new file mode 100644
index 000000000..7c9d2bb38
--- /dev/null
+++ b/arch/x86/include/uapi/asm/perf_regs.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_PERF_REGS_H
+#define _ASM_X86_PERF_REGS_H
+
+enum perf_event_x86_regs {
+	PERF_REG_X86_AX,
+	PERF_REG_X86_BX,
+	PERF_REG_X86_CX,
+	PERF_REG_X86_DX,
+	PERF_REG_X86_SI,
+	PERF_REG_X86_DI,
+	PERF_REG_X86_BP,
+	PERF_REG_X86_SP,
+	PERF_REG_X86_IP,
+	PERF_REG_X86_FLAGS,
+	PERF_REG_X86_CS,
+	PERF_REG_X86_SS,
+	PERF_REG_X86_DS,
+	PERF_REG_X86_ES,
+	PERF_REG_X86_FS,
+	PERF_REG_X86_GS,
+	PERF_REG_X86_R8,
+	PERF_REG_X86_R9,
+	PERF_REG_X86_R10,
+	PERF_REG_X86_R11,
+	PERF_REG_X86_R12,
+	PERF_REG_X86_R13,
+	PERF_REG_X86_R14,
+	PERF_REG_X86_R15,
+	/* These are the limits for the GPRs. */
+	PERF_REG_X86_32_MAX = PERF_REG_X86_GS + 1,
+	PERF_REG_X86_64_MAX = PERF_REG_X86_R15 + 1,
+
+	/* These all need two bits set because they are 128bit */
+	PERF_REG_X86_XMM0  = 32,
+	PERF_REG_X86_XMM1  = 34,
+	PERF_REG_X86_XMM2  = 36,
+	PERF_REG_X86_XMM3  = 38,
+	PERF_REG_X86_XMM4  = 40,
+	PERF_REG_X86_XMM5  = 42,
+	PERF_REG_X86_XMM6  = 44,
+	PERF_REG_X86_XMM7  = 46,
+	PERF_REG_X86_XMM8  = 48,
+	PERF_REG_X86_XMM9  = 50,
+	PERF_REG_X86_XMM10 = 52,
+	PERF_REG_X86_XMM11 = 54,
+	PERF_REG_X86_XMM12 = 56,
+	PERF_REG_X86_XMM13 = 58,
+	PERF_REG_X86_XMM14 = 60,
+	PERF_REG_X86_XMM15 = 62,
+
+	/* These include both GPRs and XMMX registers */
+	PERF_REG_X86_XMM_MAX = PERF_REG_X86_XMM15 + 2,
+};
+
+#define PERF_REG_EXTENDED_MASK	(~((1ULL << PERF_REG_X86_XMM0) - 1))
+
+#endif /* _ASM_X86_PERF_REGS_H */
diff --git a/arch/x86/include/uapi/asm/posix_types.h b/arch/x86/include/uapi/asm/posix_types.h
new file mode 100644
index 000000000..c661e95f0
--- /dev/null
+++ b/arch/x86/include/uapi/asm/posix_types.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __KERNEL__
+# ifdef __i386__
+#  include <asm/posix_types_32.h>
+# elif defined(__ILP32__)
+#  include <asm/posix_types_x32.h>
+# else
+#  include <asm/posix_types_64.h>
+# endif
+#endif
diff --git a/arch/x86/include/uapi/asm/posix_types_32.h b/arch/x86/include/uapi/asm/posix_types_32.h
new file mode 100644
index 000000000..840659f4b
--- /dev/null
+++ b/arch/x86/include/uapi/asm/posix_types_32.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_POSIX_TYPES_32_H
+#define _ASM_X86_POSIX_TYPES_32_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short	__kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
+
+typedef unsigned short	__kernel_ipc_pid_t;
+#define __kernel_ipc_pid_t __kernel_ipc_pid_t
+
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+#define __kernel_uid_t __kernel_uid_t
+
+typedef unsigned short	__kernel_old_dev_t;
+#define __kernel_old_dev_t __kernel_old_dev_t
+
+#include <asm-generic/posix_types.h>
+
+#endif /* _ASM_X86_POSIX_TYPES_32_H */
diff --git a/arch/x86/include/uapi/asm/posix_types_64.h b/arch/x86/include/uapi/asm/posix_types_64.h
new file mode 100644
index 000000000..515afb805
--- /dev/null
+++ b/arch/x86/include/uapi/asm/posix_types_64.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_POSIX_TYPES_64_H
+#define _ASM_X86_POSIX_TYPES_64_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+#define __kernel_old_uid_t __kernel_old_uid_t
+
+typedef unsigned long	__kernel_old_dev_t;
+#define __kernel_old_dev_t __kernel_old_dev_t
+
+#include <asm-generic/posix_types.h>
+
+#endif /* _ASM_X86_POSIX_TYPES_64_H */
diff --git a/arch/x86/include/uapi/asm/posix_types_x32.h b/arch/x86/include/uapi/asm/posix_types_x32.h
new file mode 100644
index 000000000..f60479b07
--- /dev/null
+++ b/arch/x86/include/uapi/asm/posix_types_x32.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_POSIX_TYPES_X32_H
+#define _ASM_X86_POSIX_TYPES_X32_H
+
+/*
+ * This file is only used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ *
+ * These types should generally match the ones used by the 64-bit kernel,
+ *
+ */
+
+typedef long long __kernel_long_t;
+typedef unsigned long long __kernel_ulong_t;
+#define __kernel_long_t __kernel_long_t
+
+#include <asm/posix_types_64.h>
+
+#endif /* _ASM_X86_POSIX_TYPES_X32_H */
diff --git a/arch/x86/include/uapi/asm/prctl.h b/arch/x86/include/uapi/asm/prctl.h
new file mode 100644
index 000000000..500b96e71
--- /dev/null
+++ b/arch/x86/include/uapi/asm/prctl.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_PRCTL_H
+#define _ASM_X86_PRCTL_H
+
+#define ARCH_SET_GS			0x1001
+#define ARCH_SET_FS			0x1002
+#define ARCH_GET_FS			0x1003
+#define ARCH_GET_GS			0x1004
+
+#define ARCH_GET_CPUID			0x1011
+#define ARCH_SET_CPUID			0x1012
+
+#define ARCH_GET_XCOMP_SUPP		0x1021
+#define ARCH_GET_XCOMP_PERM		0x1022
+#define ARCH_REQ_XCOMP_PERM		0x1023
+#define ARCH_GET_XCOMP_GUEST_PERM	0x1024
+#define ARCH_REQ_XCOMP_GUEST_PERM	0x1025
+
+#define ARCH_MAP_VDSO_X32		0x2001
+#define ARCH_MAP_VDSO_32		0x2002
+#define ARCH_MAP_VDSO_64		0x2003
+
+#endif /* _ASM_X86_PRCTL_H */
diff --git a/arch/x86/include/uapi/asm/processor-flags.h b/arch/x86/include/uapi/asm/processor-flags.h
new file mode 100644
index 000000000..c47cc7f2f
--- /dev/null
+++ b/arch/x86/include/uapi/asm/processor-flags.h
@@ -0,0 +1,168 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_PROCESSOR_FLAGS_H
+#define _UAPI_ASM_X86_PROCESSOR_FLAGS_H
+/* Various flags defined: can be included from assembler. */
+
+#include <linux/const.h>
+
+/*
+ * EFLAGS bits
+ */
+#define X86_EFLAGS_CF_BIT	0 /* Carry Flag */
+#define X86_EFLAGS_CF		_BITUL(X86_EFLAGS_CF_BIT)
+#define X86_EFLAGS_FIXED_BIT	1 /* Bit 1 - always on */
+#define X86_EFLAGS_FIXED	_BITUL(X86_EFLAGS_FIXED_BIT)
+#define X86_EFLAGS_PF_BIT	2 /* Parity Flag */
+#define X86_EFLAGS_PF		_BITUL(X86_EFLAGS_PF_BIT)
+#define X86_EFLAGS_AF_BIT	4 /* Auxiliary carry Flag */
+#define X86_EFLAGS_AF		_BITUL(X86_EFLAGS_AF_BIT)
+#define X86_EFLAGS_ZF_BIT	6 /* Zero Flag */
+#define X86_EFLAGS_ZF		_BITUL(X86_EFLAGS_ZF_BIT)
+#define X86_EFLAGS_SF_BIT	7 /* Sign Flag */
+#define X86_EFLAGS_SF		_BITUL(X86_EFLAGS_SF_BIT)
+#define X86_EFLAGS_TF_BIT	8 /* Trap Flag */
+#define X86_EFLAGS_TF		_BITUL(X86_EFLAGS_TF_BIT)
+#define X86_EFLAGS_IF_BIT	9 /* Interrupt Flag */
+#define X86_EFLAGS_IF		_BITUL(X86_EFLAGS_IF_BIT)
+#define X86_EFLAGS_DF_BIT	10 /* Direction Flag */
+#define X86_EFLAGS_DF		_BITUL(X86_EFLAGS_DF_BIT)
+#define X86_EFLAGS_OF_BIT	11 /* Overflow Flag */
+#define X86_EFLAGS_OF		_BITUL(X86_EFLAGS_OF_BIT)
+#define X86_EFLAGS_IOPL_BIT	12 /* I/O Privilege Level (2 bits) */
+#define X86_EFLAGS_IOPL		(_AC(3,UL) << X86_EFLAGS_IOPL_BIT)
+#define X86_EFLAGS_NT_BIT	14 /* Nested Task */
+#define X86_EFLAGS_NT		_BITUL(X86_EFLAGS_NT_BIT)
+#define X86_EFLAGS_RF_BIT	16 /* Resume Flag */
+#define X86_EFLAGS_RF		_BITUL(X86_EFLAGS_RF_BIT)
+#define X86_EFLAGS_VM_BIT	17 /* Virtual Mode */
+#define X86_EFLAGS_VM		_BITUL(X86_EFLAGS_VM_BIT)
+#define X86_EFLAGS_AC_BIT	18 /* Alignment Check/Access Control */
+#define X86_EFLAGS_AC		_BITUL(X86_EFLAGS_AC_BIT)
+#define X86_EFLAGS_VIF_BIT	19 /* Virtual Interrupt Flag */
+#define X86_EFLAGS_VIF		_BITUL(X86_EFLAGS_VIF_BIT)
+#define X86_EFLAGS_VIP_BIT	20 /* Virtual Interrupt Pending */
+#define X86_EFLAGS_VIP		_BITUL(X86_EFLAGS_VIP_BIT)
+#define X86_EFLAGS_ID_BIT	21 /* CPUID detection */
+#define X86_EFLAGS_ID		_BITUL(X86_EFLAGS_ID_BIT)
+
+/*
+ * Basic CPU control in CR0
+ */
+#define X86_CR0_PE_BIT		0 /* Protection Enable */
+#define X86_CR0_PE		_BITUL(X86_CR0_PE_BIT)
+#define X86_CR0_MP_BIT		1 /* Monitor Coprocessor */
+#define X86_CR0_MP		_BITUL(X86_CR0_MP_BIT)
+#define X86_CR0_EM_BIT		2 /* Emulation */
+#define X86_CR0_EM		_BITUL(X86_CR0_EM_BIT)
+#define X86_CR0_TS_BIT		3 /* Task Switched */
+#define X86_CR0_TS		_BITUL(X86_CR0_TS_BIT)
+#define X86_CR0_ET_BIT		4 /* Extension Type */
+#define X86_CR0_ET		_BITUL(X86_CR0_ET_BIT)
+#define X86_CR0_NE_BIT		5 /* Numeric Error */
+#define X86_CR0_NE		_BITUL(X86_CR0_NE_BIT)
+#define X86_CR0_WP_BIT		16 /* Write Protect */
+#define X86_CR0_WP		_BITUL(X86_CR0_WP_BIT)
+#define X86_CR0_AM_BIT		18 /* Alignment Mask */
+#define X86_CR0_AM		_BITUL(X86_CR0_AM_BIT)
+#define X86_CR0_NW_BIT		29 /* Not Write-through */
+#define X86_CR0_NW		_BITUL(X86_CR0_NW_BIT)
+#define X86_CR0_CD_BIT		30 /* Cache Disable */
+#define X86_CR0_CD		_BITUL(X86_CR0_CD_BIT)
+#define X86_CR0_PG_BIT		31 /* Paging */
+#define X86_CR0_PG		_BITUL(X86_CR0_PG_BIT)
+
+/*
+ * Paging options in CR3
+ */
+#define X86_CR3_PWT_BIT		3 /* Page Write Through */
+#define X86_CR3_PWT		_BITUL(X86_CR3_PWT_BIT)
+#define X86_CR3_PCD_BIT		4 /* Page Cache Disable */
+#define X86_CR3_PCD		_BITUL(X86_CR3_PCD_BIT)
+
+#define X86_CR3_PCID_BITS	12
+#define X86_CR3_PCID_MASK	(_AC((1UL << X86_CR3_PCID_BITS) - 1, UL))
+
+#define X86_CR3_PCID_NOFLUSH_BIT 63 /* Preserve old PCID */
+#define X86_CR3_PCID_NOFLUSH    _BITULL(X86_CR3_PCID_NOFLUSH_BIT)
+
+/*
+ * Intel CPU features in CR4
+ */
+#define X86_CR4_VME_BIT		0 /* enable vm86 extensions */
+#define X86_CR4_VME		_BITUL(X86_CR4_VME_BIT)
+#define X86_CR4_PVI_BIT		1 /* virtual interrupts flag enable */
+#define X86_CR4_PVI		_BITUL(X86_CR4_PVI_BIT)
+#define X86_CR4_TSD_BIT		2 /* disable time stamp at ipl 3 */
+#define X86_CR4_TSD		_BITUL(X86_CR4_TSD_BIT)
+#define X86_CR4_DE_BIT		3 /* enable debugging extensions */
+#define X86_CR4_DE		_BITUL(X86_CR4_DE_BIT)
+#define X86_CR4_PSE_BIT		4 /* enable page size extensions */
+#define X86_CR4_PSE		_BITUL(X86_CR4_PSE_BIT)
+#define X86_CR4_PAE_BIT		5 /* enable physical address extensions */
+#define X86_CR4_PAE		_BITUL(X86_CR4_PAE_BIT)
+#define X86_CR4_MCE_BIT		6 /* Machine check enable */
+#define X86_CR4_MCE		_BITUL(X86_CR4_MCE_BIT)
+#define X86_CR4_PGE_BIT		7 /* enable global pages */
+#define X86_CR4_PGE		_BITUL(X86_CR4_PGE_BIT)
+#define X86_CR4_PCE_BIT		8 /* enable performance counters at ipl 3 */
+#define X86_CR4_PCE		_BITUL(X86_CR4_PCE_BIT)
+#define X86_CR4_OSFXSR_BIT	9 /* enable fast FPU save and restore */
+#define X86_CR4_OSFXSR		_BITUL(X86_CR4_OSFXSR_BIT)
+#define X86_CR4_OSXMMEXCPT_BIT	10 /* enable unmasked SSE exceptions */
+#define X86_CR4_OSXMMEXCPT	_BITUL(X86_CR4_OSXMMEXCPT_BIT)
+#define X86_CR4_UMIP_BIT	11 /* enable UMIP support */
+#define X86_CR4_UMIP		_BITUL(X86_CR4_UMIP_BIT)
+#define X86_CR4_LA57_BIT	12 /* enable 5-level page tables */
+#define X86_CR4_LA57		_BITUL(X86_CR4_LA57_BIT)
+#define X86_CR4_VMXE_BIT	13 /* enable VMX virtualization */
+#define X86_CR4_VMXE		_BITUL(X86_CR4_VMXE_BIT)
+#define X86_CR4_SMXE_BIT	14 /* enable safer mode (TXT) */
+#define X86_CR4_SMXE		_BITUL(X86_CR4_SMXE_BIT)
+#define X86_CR4_FSGSBASE_BIT	16 /* enable RDWRFSGS support */
+#define X86_CR4_FSGSBASE	_BITUL(X86_CR4_FSGSBASE_BIT)
+#define X86_CR4_PCIDE_BIT	17 /* enable PCID support */
+#define X86_CR4_PCIDE		_BITUL(X86_CR4_PCIDE_BIT)
+#define X86_CR4_OSXSAVE_BIT	18 /* enable xsave and xrestore */
+#define X86_CR4_OSXSAVE		_BITUL(X86_CR4_OSXSAVE_BIT)
+#define X86_CR4_SMEP_BIT	20 /* enable SMEP support */
+#define X86_CR4_SMEP		_BITUL(X86_CR4_SMEP_BIT)
+#define X86_CR4_SMAP_BIT	21 /* enable SMAP support */
+#define X86_CR4_SMAP		_BITUL(X86_CR4_SMAP_BIT)
+#define X86_CR4_PKE_BIT		22 /* enable Protection Keys support */
+#define X86_CR4_PKE		_BITUL(X86_CR4_PKE_BIT)
+#define X86_CR4_CET_BIT		23 /* enable Control-flow Enforcement Technology */
+#define X86_CR4_CET		_BITUL(X86_CR4_CET_BIT)
+
+/*
+ * x86-64 Task Priority Register, CR8
+ */
+#define X86_CR8_TPR		_AC(0x0000000f,UL) /* task priority register */
+
+/*
+ * AMD and Transmeta use MSRs for configuration; see <asm/msr-index.h>
+ */
+
+/*
+ *      NSC/Cyrix CPU configuration register indexes
+ */
+#define CX86_PCR0	0x20
+#define CX86_GCR	0xb8
+#define CX86_CCR0	0xc0
+#define CX86_CCR1	0xc1
+#define CX86_CCR2	0xc2
+#define CX86_CCR3	0xc3
+#define CX86_CCR4	0xe8
+#define CX86_CCR5	0xe9
+#define CX86_CCR6	0xea
+#define CX86_CCR7	0xeb
+#define CX86_PCR1	0xf0
+#define CX86_DIR0	0xfe
+#define CX86_DIR1	0xff
+#define CX86_ARR_BASE	0xc4
+#define CX86_RCR_BASE	0xdc
+
+#define CR0_STATE	(X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \
+			 X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \
+			 X86_CR0_PG)
+
+#endif /* _UAPI_ASM_X86_PROCESSOR_FLAGS_H */
diff --git a/arch/x86/include/uapi/asm/ptrace-abi.h b/arch/x86/include/uapi/asm/ptrace-abi.h
new file mode 100644
index 000000000..16074b9c9
--- /dev/null
+++ b/arch/x86/include/uapi/asm/ptrace-abi.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_PTRACE_ABI_H
+#define _ASM_X86_PTRACE_ABI_H
+
+#ifdef __i386__
+
+#define EBX 0
+#define ECX 1
+#define EDX 2
+#define ESI 3
+#define EDI 4
+#define EBP 5
+#define EAX 6
+#define DS 7
+#define ES 8
+#define FS 9
+#define GS 10
+#define ORIG_EAX 11
+#define EIP 12
+#define CS  13
+#define EFL 14
+#define UESP 15
+#define SS   16
+#define FRAME_SIZE 17
+
+#else /* __i386__ */
+
+#if defined(__ASSEMBLY__) || defined(__FRAME_OFFSETS)
+/*
+ * C ABI says these regs are callee-preserved. They aren't saved on kernel entry
+ * unless syscall needs a complete, fully filled "struct pt_regs".
+ */
+#define R15 0
+#define R14 8
+#define R13 16
+#define R12 24
+#define RBP 32
+#define RBX 40
+/* These regs are callee-clobbered. Always saved on kernel entry. */
+#define R11 48
+#define R10 56
+#define R9 64
+#define R8 72
+#define RAX 80
+#define RCX 88
+#define RDX 96
+#define RSI 104
+#define RDI 112
+/*
+ * On syscall entry, this is syscall#. On CPU exception, this is error code.
+ * On hw interrupt, it's IRQ number:
+ */
+#define ORIG_RAX 120
+/* Return frame for iretq */
+#define RIP 128
+#define CS 136
+#define EFLAGS 144
+#define RSP 152
+#define SS 160
+#endif /* __ASSEMBLY__ */
+
+/* top of stack page */
+#define FRAME_SIZE 168
+
+#endif /* !__i386__ */
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_GETFPXREGS         18
+#define PTRACE_SETFPXREGS         19
+
+#define PTRACE_OLDSETOPTIONS      21
+
+/* only useful for access 32bit programs / kernels */
+#define PTRACE_GET_THREAD_AREA    25
+#define PTRACE_SET_THREAD_AREA    26
+
+#ifdef __x86_64__
+# define PTRACE_ARCH_PRCTL	  30
+#endif
+
+#define PTRACE_SYSEMU		  31
+#define PTRACE_SYSEMU_SINGLESTEP  32
+
+#define PTRACE_SINGLEBLOCK	33	/* resume execution until next branch */
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+#endif /* _ASM_X86_PTRACE_ABI_H */
diff --git a/arch/x86/include/uapi/asm/ptrace.h b/arch/x86/include/uapi/asm/ptrace.h
new file mode 100644
index 000000000..85165c0ed
--- /dev/null
+++ b/arch/x86/include/uapi/asm/ptrace.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_PTRACE_H
+#define _UAPI_ASM_X86_PTRACE_H
+
+#include <linux/compiler.h>	/* For __user */
+#include <asm/ptrace-abi.h>
+#include <asm/processor-flags.h>
+
+
+#ifndef __ASSEMBLY__
+
+#ifdef __i386__
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+#ifndef __KERNEL__
+
+struct pt_regs {
+	long ebx;
+	long ecx;
+	long edx;
+	long esi;
+	long edi;
+	long ebp;
+	long eax;
+	int  xds;
+	int  xes;
+	int  xfs;
+	int  xgs;
+	long orig_eax;
+	long eip;
+	int  xcs;
+	long eflags;
+	long esp;
+	int  xss;
+};
+
+#endif /* __KERNEL__ */
+
+#else /* __i386__ */
+
+#ifndef __KERNEL__
+
+struct pt_regs {
+/*
+ * C ABI says these regs are callee-preserved. They aren't saved on kernel entry
+ * unless syscall needs a complete, fully filled "struct pt_regs".
+ */
+	unsigned long r15;
+	unsigned long r14;
+	unsigned long r13;
+	unsigned long r12;
+	unsigned long rbp;
+	unsigned long rbx;
+/* These regs are callee-clobbered. Always saved on kernel entry. */
+	unsigned long r11;
+	unsigned long r10;
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long rax;
+	unsigned long rcx;
+	unsigned long rdx;
+	unsigned long rsi;
+	unsigned long rdi;
+/*
+ * On syscall entry, this is syscall#. On CPU exception, this is error code.
+ * On hw interrupt, it's IRQ number:
+ */
+	unsigned long orig_rax;
+/* Return frame for iretq */
+	unsigned long rip;
+	unsigned long cs;
+	unsigned long eflags;
+	unsigned long rsp;
+	unsigned long ss;
+/* top of stack page */
+};
+
+#endif /* __KERNEL__ */
+#endif /* !__i386__ */
+
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _UAPI_ASM_X86_PTRACE_H */
diff --git a/arch/x86/include/uapi/asm/sembuf.h b/arch/x86/include/uapi/asm/sembuf.h
new file mode 100644
index 000000000..71205b02a
--- /dev/null
+++ b/arch/x86/include/uapi/asm/sembuf.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_SEMBUF_H
+#define _ASM_X86_SEMBUF_H
+
+#include <asm/ipcbuf.h>
+
+/*
+ * The semid64_ds structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 32-bit values
+ *
+ * x86_64 and x32 incorrectly added padding here, so the structures
+ * are still incompatible with the padding on x86.
+ */
+struct semid64_ds {
+	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
+#ifdef __i386__
+	unsigned long	sem_otime;	/* last semop time */
+	unsigned long	sem_otime_high;
+	unsigned long	sem_ctime;	/* last change time */
+	unsigned long	sem_ctime_high;
+#else
+	__kernel_long_t sem_otime;	/* last semop time */
+	__kernel_ulong_t __unused1;
+	__kernel_long_t sem_ctime;	/* last change time */
+	__kernel_ulong_t __unused2;
+#endif
+	__kernel_ulong_t sem_nsems;	/* no. of semaphores in array */
+	__kernel_ulong_t __unused3;
+	__kernel_ulong_t __unused4;
+};
+
+#endif /* _ASM_X86_SEMBUF_H */
diff --git a/arch/x86/include/uapi/asm/setup.h b/arch/x86/include/uapi/asm/setup.h
new file mode 100644
index 000000000..79a9626b5
--- /dev/null
+++ b/arch/x86/include/uapi/asm/setup.h
@@ -0,0 +1 @@
+/* */
diff --git a/arch/x86/include/uapi/asm/sgx.h b/arch/x86/include/uapi/asm/sgx.h
new file mode 100644
index 000000000..2dd35bbdc
--- /dev/null
+++ b/arch/x86/include/uapi/asm/sgx.h
@@ -0,0 +1,232 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright(c) 2016-20 Intel Corporation.
+ */
+#ifndef _UAPI_ASM_X86_SGX_H
+#define _UAPI_ASM_X86_SGX_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/**
+ * enum sgx_page_flags - page control flags
+ * %SGX_PAGE_MEASURE:	Measure the page contents with a sequence of
+ *			ENCLS[EEXTEND] operations.
+ */
+enum sgx_page_flags {
+	SGX_PAGE_MEASURE	= 0x01,
+};
+
+#define SGX_MAGIC 0xA4
+
+#define SGX_IOC_ENCLAVE_CREATE \
+	_IOW(SGX_MAGIC, 0x00, struct sgx_enclave_create)
+#define SGX_IOC_ENCLAVE_ADD_PAGES \
+	_IOWR(SGX_MAGIC, 0x01, struct sgx_enclave_add_pages)
+#define SGX_IOC_ENCLAVE_INIT \
+	_IOW(SGX_MAGIC, 0x02, struct sgx_enclave_init)
+#define SGX_IOC_ENCLAVE_PROVISION \
+	_IOW(SGX_MAGIC, 0x03, struct sgx_enclave_provision)
+#define SGX_IOC_VEPC_REMOVE_ALL \
+	_IO(SGX_MAGIC, 0x04)
+#define SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS \
+	_IOWR(SGX_MAGIC, 0x05, struct sgx_enclave_restrict_permissions)
+#define SGX_IOC_ENCLAVE_MODIFY_TYPES \
+	_IOWR(SGX_MAGIC, 0x06, struct sgx_enclave_modify_types)
+#define SGX_IOC_ENCLAVE_REMOVE_PAGES \
+	_IOWR(SGX_MAGIC, 0x07, struct sgx_enclave_remove_pages)
+
+/**
+ * struct sgx_enclave_create - parameter structure for the
+ *                             %SGX_IOC_ENCLAVE_CREATE ioctl
+ * @src:	address for the SECS page data
+ */
+struct sgx_enclave_create  {
+	__u64	src;
+};
+
+/**
+ * struct sgx_enclave_add_pages - parameter structure for the
+ *                                %SGX_IOC_ENCLAVE_ADD_PAGE ioctl
+ * @src:	start address for the page data
+ * @offset:	starting page offset
+ * @length:	length of the data (multiple of the page size)
+ * @secinfo:	address for the SECINFO data
+ * @flags:	page control flags
+ * @count:	number of bytes added (multiple of the page size)
+ */
+struct sgx_enclave_add_pages {
+	__u64 src;
+	__u64 offset;
+	__u64 length;
+	__u64 secinfo;
+	__u64 flags;
+	__u64 count;
+};
+
+/**
+ * struct sgx_enclave_init - parameter structure for the
+ *                           %SGX_IOC_ENCLAVE_INIT ioctl
+ * @sigstruct:	address for the SIGSTRUCT data
+ */
+struct sgx_enclave_init {
+	__u64 sigstruct;
+};
+
+/**
+ * struct sgx_enclave_provision - parameter structure for the
+ *				  %SGX_IOC_ENCLAVE_PROVISION ioctl
+ * @fd:		file handle of /dev/sgx_provision
+ */
+struct sgx_enclave_provision {
+	__u64 fd;
+};
+
+/**
+ * struct sgx_enclave_restrict_permissions - parameters for ioctl
+ *                                        %SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS
+ * @offset:	starting page offset (page aligned relative to enclave base
+ *		address defined in SECS)
+ * @length:	length of memory (multiple of the page size)
+ * @permissions:new permission bits for pages in range described by @offset
+ *              and @length
+ * @result:	(output) SGX result code of ENCLS[EMODPR] function
+ * @count:	(output) bytes successfully changed (multiple of page size)
+ */
+struct sgx_enclave_restrict_permissions {
+	__u64 offset;
+	__u64 length;
+	__u64 permissions;
+	__u64 result;
+	__u64 count;
+};
+
+/**
+ * struct sgx_enclave_modify_types - parameters for ioctl
+ *                                   %SGX_IOC_ENCLAVE_MODIFY_TYPES
+ * @offset:	starting page offset (page aligned relative to enclave base
+ *		address defined in SECS)
+ * @length:	length of memory (multiple of the page size)
+ * @page_type:	new type for pages in range described by @offset and @length
+ * @result:	(output) SGX result code of ENCLS[EMODT] function
+ * @count:	(output) bytes successfully changed (multiple of page size)
+ */
+struct sgx_enclave_modify_types {
+	__u64 offset;
+	__u64 length;
+	__u64 page_type;
+	__u64 result;
+	__u64 count;
+};
+
+/**
+ * struct sgx_enclave_remove_pages - %SGX_IOC_ENCLAVE_REMOVE_PAGES parameters
+ * @offset:	starting page offset (page aligned relative to enclave base
+ *		address defined in SECS)
+ * @length:	length of memory (multiple of the page size)
+ * @count:	(output) bytes successfully changed (multiple of page size)
+ *
+ * Regular (PT_REG) or TCS (PT_TCS) can be removed from an initialized
+ * enclave if the system supports SGX2. First, the %SGX_IOC_ENCLAVE_MODIFY_TYPES
+ * ioctl() should be used to change the page type to PT_TRIM. After that
+ * succeeds ENCLU[EACCEPT] should be run from within the enclave and then
+ * %SGX_IOC_ENCLAVE_REMOVE_PAGES can be used to complete the page removal.
+ */
+struct sgx_enclave_remove_pages {
+	__u64 offset;
+	__u64 length;
+	__u64 count;
+};
+
+struct sgx_enclave_run;
+
+/**
+ * typedef sgx_enclave_user_handler_t - Exit handler function accepted by
+ *					__vdso_sgx_enter_enclave()
+ * @run:	The run instance given by the caller
+ *
+ * The register parameters contain the snapshot of their values at enclave
+ * exit. An invalid ENCLU function number will cause -EINVAL to be returned
+ * to the caller.
+ *
+ * Return:
+ * - <= 0:	The given value is returned back to the caller.
+ * - > 0:	ENCLU function to invoke, either EENTER or ERESUME.
+ */
+typedef int (*sgx_enclave_user_handler_t)(long rdi, long rsi, long rdx,
+					  long rsp, long r8, long r9,
+					  struct sgx_enclave_run *run);
+
+/**
+ * struct sgx_enclave_run - the execution context of __vdso_sgx_enter_enclave()
+ * @tcs:			TCS used to enter the enclave
+ * @function:			The last seen ENCLU function (EENTER, ERESUME or EEXIT)
+ * @exception_vector:		The interrupt vector of the exception
+ * @exception_error_code:	The exception error code pulled out of the stack
+ * @exception_addr:		The address that triggered the exception
+ * @user_handler:		User provided callback run on exception
+ * @user_data:			Data passed to the user handler
+ * @reserved			Reserved for future extensions
+ *
+ * If @user_handler is provided, the handler will be invoked on all return paths
+ * of the normal flow.  The user handler may transfer control, e.g. via a
+ * longjmp() call or a C++ exception, without returning to
+ * __vdso_sgx_enter_enclave().
+ */
+struct sgx_enclave_run {
+	__u64 tcs;
+	__u32 function;
+	__u16 exception_vector;
+	__u16 exception_error_code;
+	__u64 exception_addr;
+	__u64 user_handler;
+	__u64 user_data;
+	__u8  reserved[216];
+};
+
+/**
+ * typedef vdso_sgx_enter_enclave_t - Prototype for __vdso_sgx_enter_enclave(),
+ *				      a vDSO function to enter an SGX enclave.
+ * @rdi:	Pass-through value for RDI
+ * @rsi:	Pass-through value for RSI
+ * @rdx:	Pass-through value for RDX
+ * @function:	ENCLU function, must be EENTER or ERESUME
+ * @r8:		Pass-through value for R8
+ * @r9:		Pass-through value for R9
+ * @run:	struct sgx_enclave_run, must be non-NULL
+ *
+ * NOTE: __vdso_sgx_enter_enclave() does not ensure full compliance with the
+ * x86-64 ABI, e.g. doesn't handle XSAVE state.  Except for non-volatile
+ * general purpose registers, EFLAGS.DF, and RSP alignment, preserving/setting
+ * state in accordance with the x86-64 ABI is the responsibility of the enclave
+ * and its runtime, i.e. __vdso_sgx_enter_enclave() cannot be called from C
+ * code without careful consideration by both the enclave and its runtime.
+ *
+ * All general purpose registers except RAX, RBX and RCX are passed as-is to the
+ * enclave.  RAX, RBX and RCX are consumed by EENTER and ERESUME and are loaded
+ * with @function, asynchronous exit pointer, and @run.tcs respectively.
+ *
+ * RBP and the stack are used to anchor __vdso_sgx_enter_enclave() to the
+ * pre-enclave state, e.g. to retrieve @run.exception and @run.user_handler
+ * after an enclave exit.  All other registers are available for use by the
+ * enclave and its runtime, e.g. an enclave can push additional data onto the
+ * stack (and modify RSP) to pass information to the optional user handler (see
+ * below).
+ *
+ * Most exceptions reported on ENCLU, including those that occur within the
+ * enclave, are fixed up and reported synchronously instead of being delivered
+ * via a standard signal. Debug Exceptions (#DB) and Breakpoints (#BP) are
+ * never fixed up and are always delivered via standard signals. On synchronously
+ * reported exceptions, -EFAULT is returned and details about the exception are
+ * recorded in @run.exception, the optional sgx_enclave_exception struct.
+ *
+ * Return:
+ * - 0:		ENCLU function was successfully executed.
+ * - -EINVAL:	Invalid ENCL number (neither EENTER nor ERESUME).
+ */
+typedef int (*vdso_sgx_enter_enclave_t)(unsigned long rdi, unsigned long rsi,
+					unsigned long rdx, unsigned int function,
+					unsigned long r8,  unsigned long r9,
+					struct sgx_enclave_run *run);
+
+#endif /* _UAPI_ASM_X86_SGX_H */
diff --git a/arch/x86/include/uapi/asm/shmbuf.h b/arch/x86/include/uapi/asm/shmbuf.h
new file mode 100644
index 000000000..13775bfdf
--- /dev/null
+++ b/arch/x86/include/uapi/asm/shmbuf.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_X86_SHMBUF_H
+#define __ASM_X86_SHMBUF_H
+
+#if !defined(__x86_64__) || !defined(__ILP32__)
+#include <asm-generic/shmbuf.h>
+#else
+
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
+
+/*
+ * The shmid64_ds structure for x86 architecture with x32 ABI.
+ *
+ * On x86-32 and x86-64 we can just use the generic definition, but
+ * x32 uses the same binary layout as x86_64, which is different
+ * from other 32-bit architectures.
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	__kernel_size_t		shm_segsz;	/* size of segment (bytes) */
+	__kernel_long_t		shm_atime;	/* last attach time */
+	__kernel_long_t		shm_dtime;	/* last detach time */
+	__kernel_long_t		shm_ctime;	/* last change time */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	__kernel_ulong_t	shm_nattch;	/* no. of current attaches */
+	__kernel_ulong_t	__unused4;
+	__kernel_ulong_t	__unused5;
+};
+
+struct shminfo64 {
+	__kernel_ulong_t	shmmax;
+	__kernel_ulong_t	shmmin;
+	__kernel_ulong_t	shmmni;
+	__kernel_ulong_t	shmseg;
+	__kernel_ulong_t	shmall;
+	__kernel_ulong_t	__unused1;
+	__kernel_ulong_t	__unused2;
+	__kernel_ulong_t	__unused3;
+	__kernel_ulong_t	__unused4;
+};
+
+#endif
+
+#endif /* __ASM_X86_SHMBUF_H */
diff --git a/arch/x86/include/uapi/asm/sigcontext.h b/arch/x86/include/uapi/asm/sigcontext.h
new file mode 100644
index 000000000..d0d9b331d
--- /dev/null
+++ b/arch/x86/include/uapi/asm/sigcontext.h
@@ -0,0 +1,389 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_SIGCONTEXT_H
+#define _UAPI_ASM_X86_SIGCONTEXT_H
+
+/*
+ * Linux signal context definitions. The sigcontext includes a complex
+ * hierarchy of CPU and FPU state, available to user-space (on the stack) when
+ * a signal handler is executed.
+ *
+ * As over the years this ABI grew from its very simple roots towards
+ * supporting more and more CPU state organically, some of the details (which
+ * were rather clever hacks back in the days) became a bit quirky by today.
+ *
+ * The current ABI includes flexible provisions for future extensions, so we
+ * won't have to grow new quirks for quite some time. Promise!
+ */
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#define FP_XSTATE_MAGIC1		0x46505853U
+#define FP_XSTATE_MAGIC2		0x46505845U
+#define FP_XSTATE_MAGIC2_SIZE		sizeof(FP_XSTATE_MAGIC2)
+
+/*
+ * Bytes 464..511 in the current 512-byte layout of the FXSAVE/FXRSTOR frame
+ * are reserved for SW usage. On CPUs supporting XSAVE/XRSTOR, these bytes are
+ * used to extend the fpstate pointer in the sigcontext, which now includes the
+ * extended state information along with fpstate information.
+ *
+ * If sw_reserved.magic1 == FP_XSTATE_MAGIC1 then there's a
+ * sw_reserved.extended_size bytes large extended context area present. (The
+ * last 32-bit word of this extended area (at the
+ * fpstate+extended_size-FP_XSTATE_MAGIC2_SIZE address) is set to
+ * FP_XSTATE_MAGIC2 so that you can sanity check your size calculations.)
+ *
+ * This extended area typically grows with newer CPUs that have larger and
+ * larger XSAVE areas.
+ */
+struct _fpx_sw_bytes {
+	/*
+	 * If set to FP_XSTATE_MAGIC1 then this is an xstate context.
+	 * 0 if a legacy frame.
+	 */
+	__u32				magic1;
+
+	/*
+	 * Total size of the fpstate area:
+	 *
+	 *  - if magic1 == 0 then it's sizeof(struct _fpstate)
+	 *  - if magic1 == FP_XSTATE_MAGIC1 then it's sizeof(struct _xstate)
+	 *    plus extensions (if any)
+	 */
+	__u32				extended_size;
+
+	/*
+	 * Feature bit mask (including FP/SSE/extended state) that is present
+	 * in the memory layout:
+	 */
+	__u64				xfeatures;
+
+	/*
+	 * Actual XSAVE state size, based on the xfeatures saved in the layout.
+	 * 'extended_size' is greater than 'xstate_size':
+	 */
+	__u32				xstate_size;
+
+	/* For future use: */
+	__u32				padding[7];
+};
+
+/*
+ * As documented in the iBCS2 standard:
+ *
+ * The first part of "struct _fpstate" is just the normal i387 hardware setup,
+ * the extra "status" word is used to save the coprocessor status word before
+ * entering the handler.
+ *
+ * The FPU state data structure has had to grow to accommodate the extended FPU
+ * state required by the Streaming SIMD Extensions.  There is no documented
+ * standard to accomplish this at the moment.
+ */
+
+/* 10-byte legacy floating point register: */
+struct _fpreg {
+	__u16				significand[4];
+	__u16				exponent;
+};
+
+/* 16-byte floating point register: */
+struct _fpxreg {
+	__u16				significand[4];
+	__u16				exponent;
+	__u16				padding[3];
+};
+
+/* 16-byte XMM register: */
+struct _xmmreg {
+	__u32				element[4];
+};
+
+#define X86_FXSR_MAGIC			0x0000
+
+/*
+ * The 32-bit FPU frame:
+ */
+struct _fpstate_32 {
+	/* Legacy FPU environment: */
+	__u32				cw;
+	__u32				sw;
+	__u32				tag;
+	__u32				ipoff;
+	__u32				cssel;
+	__u32				dataoff;
+	__u32				datasel;
+	struct _fpreg			_st[8];
+	__u16				status;
+	__u16				magic;		/* 0xffff: regular FPU data only */
+							/* 0x0000: FXSR FPU data */
+
+	/* FXSR FPU environment */
+	__u32				_fxsr_env[6];	/* FXSR FPU env is ignored */
+	__u32				mxcsr;
+	__u32				reserved;
+	struct _fpxreg			_fxsr_st[8];	/* FXSR FPU reg data is ignored */
+	struct _xmmreg			_xmm[8];	/* First 8 XMM registers */
+	union {
+		__u32			padding1[44];	/* Second 8 XMM registers plus padding */
+		__u32			padding[44];	/* Alias name for old user-space */
+	};
+
+	union {
+		__u32			padding2[12];
+		struct _fpx_sw_bytes	sw_reserved;	/* Potential extended state is encoded here */
+	};
+};
+
+/*
+ * The 64-bit FPU frame. (FXSAVE format and later)
+ *
+ * Note1: If sw_reserved.magic1 == FP_XSTATE_MAGIC1 then the structure is
+ *        larger: 'struct _xstate'. Note that 'struct _xstate' embeds
+ *        'struct _fpstate' so that you can always assume the _fpstate portion
+ *        exists so that you can check the magic value.
+ *
+ * Note2: Reserved fields may someday contain valuable data. Always
+ *	  save/restore them when you change signal frames.
+ */
+struct _fpstate_64 {
+	__u16				cwd;
+	__u16				swd;
+	/* Note this is not the same as the 32-bit/x87/FSAVE twd: */
+	__u16				twd;
+	__u16				fop;
+	__u64				rip;
+	__u64				rdp;
+	__u32				mxcsr;
+	__u32				mxcsr_mask;
+	__u32				st_space[32];	/*  8x  FP registers, 16 bytes each */
+	__u32				xmm_space[64];	/* 16x XMM registers, 16 bytes each */
+	__u32				reserved2[12];
+	union {
+		__u32			reserved3[12];
+		struct _fpx_sw_bytes	sw_reserved;	/* Potential extended state is encoded here */
+	};
+};
+
+#ifdef __i386__
+# define _fpstate _fpstate_32
+#else
+# define _fpstate _fpstate_64
+#endif
+
+struct _header {
+	__u64				xfeatures;
+	__u64				reserved1[2];
+	__u64				reserved2[5];
+};
+
+struct _ymmh_state {
+	/* 16x YMM registers, 16 bytes each: */
+	__u32				ymmh_space[64];
+};
+
+/*
+ * Extended state pointed to by sigcontext::fpstate.
+ *
+ * In addition to the fpstate, information encoded in _xstate::xstate_hdr
+ * indicates the presence of other extended state information supported
+ * by the CPU and kernel:
+ */
+struct _xstate {
+	struct _fpstate			fpstate;
+	struct _header			xstate_hdr;
+	struct _ymmh_state		ymmh;
+	/* New processor state extensions go here: */
+};
+
+/*
+ * The 32-bit signal frame:
+ */
+struct sigcontext_32 {
+	__u16				gs, __gsh;
+	__u16				fs, __fsh;
+	__u16				es, __esh;
+	__u16				ds, __dsh;
+	__u32				di;
+	__u32				si;
+	__u32				bp;
+	__u32				sp;
+	__u32				bx;
+	__u32				dx;
+	__u32				cx;
+	__u32				ax;
+	__u32				trapno;
+	__u32				err;
+	__u32				ip;
+	__u16				cs, __csh;
+	__u32				flags;
+	__u32				sp_at_signal;
+	__u16				ss, __ssh;
+
+	/*
+	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
+	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
+	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
+	 * of extended memory layout. See comments at the definition of
+	 * (struct _fpx_sw_bytes)
+	 */
+	__u32				fpstate; /* Zero when no FPU/extended context */
+	__u32				oldmask;
+	__u32				cr2;
+};
+
+/*
+ * The 64-bit signal frame:
+ */
+struct sigcontext_64 {
+	__u64				r8;
+	__u64				r9;
+	__u64				r10;
+	__u64				r11;
+	__u64				r12;
+	__u64				r13;
+	__u64				r14;
+	__u64				r15;
+	__u64				di;
+	__u64				si;
+	__u64				bp;
+	__u64				bx;
+	__u64				dx;
+	__u64				ax;
+	__u64				cx;
+	__u64				sp;
+	__u64				ip;
+	__u64				flags;
+	__u16				cs;
+	__u16				gs;
+	__u16				fs;
+	__u16				ss;
+	__u64				err;
+	__u64				trapno;
+	__u64				oldmask;
+	__u64				cr2;
+
+	/*
+	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
+	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
+	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
+	 * of extended memory layout. See comments at the definition of
+	 * (struct _fpx_sw_bytes)
+	 */
+	__u64				fpstate; /* Zero when no FPU/extended context */
+	__u64				reserved1[8];
+};
+
+/*
+ * Create the real 'struct sigcontext' type:
+ */
+#ifdef __KERNEL__
+# ifdef __i386__
+#  define sigcontext sigcontext_32
+# else
+#  define sigcontext sigcontext_64
+# endif
+#endif
+
+/*
+ * The old user-space sigcontext definition, just in case user-space still
+ * relies on it. The kernel definition (in asm/sigcontext.h) has unified
+ * field names but otherwise the same layout.
+ */
+#ifndef __KERNEL__
+
+#define _fpstate_ia32			_fpstate_32
+#define sigcontext_ia32			sigcontext_32
+
+
+# ifdef __i386__
+struct sigcontext {
+	__u16				gs, __gsh;
+	__u16				fs, __fsh;
+	__u16				es, __esh;
+	__u16				ds, __dsh;
+	__u32				edi;
+	__u32				esi;
+	__u32				ebp;
+	__u32				esp;
+	__u32				ebx;
+	__u32				edx;
+	__u32				ecx;
+	__u32				eax;
+	__u32				trapno;
+	__u32				err;
+	__u32				eip;
+	__u16				cs, __csh;
+	__u32				eflags;
+	__u32				esp_at_signal;
+	__u16				ss, __ssh;
+	struct _fpstate __user		*fpstate;
+	__u32				oldmask;
+	__u32				cr2;
+};
+# else /* __x86_64__: */
+struct sigcontext {
+	__u64				r8;
+	__u64				r9;
+	__u64				r10;
+	__u64				r11;
+	__u64				r12;
+	__u64				r13;
+	__u64				r14;
+	__u64				r15;
+	__u64				rdi;
+	__u64				rsi;
+	__u64				rbp;
+	__u64				rbx;
+	__u64				rdx;
+	__u64				rax;
+	__u64				rcx;
+	__u64				rsp;
+	__u64				rip;
+	__u64				eflags;		/* RFLAGS */
+	__u16				cs;
+
+	/*
+	 * Prior to 2.5.64 ("[PATCH] x86-64 updates for 2.5.64-bk3"),
+	 * Linux saved and restored fs and gs in these slots.  This
+	 * was counterproductive, as fsbase and gsbase were never
+	 * saved, so arch_prctl was presumably unreliable.
+	 *
+	 * These slots should never be reused without extreme caution:
+	 *
+	 *  - Some DOSEMU versions stash fs and gs in these slots manually,
+	 *    thus overwriting anything the kernel expects to be preserved
+	 *    in these slots.
+	 *
+	 *  - If these slots are ever needed for any other purpose,
+	 *    there is some risk that very old 64-bit binaries could get
+	 *    confused.  I doubt that many such binaries still work,
+	 *    though, since the same patch in 2.5.64 also removed the
+	 *    64-bit set_thread_area syscall, so it appears that there
+	 *    is no TLS API beyond modify_ldt that works in both pre-
+	 *    and post-2.5.64 kernels.
+	 *
+	 * If the kernel ever adds explicit fs, gs, fsbase, and gsbase
+	 * save/restore, it will most likely need to be opt-in and use
+	 * different context slots.
+	 */
+	__u16				gs;
+	__u16				fs;
+	union {
+		__u16			ss;	/* If UC_SIGCONTEXT_SS */
+		__u16			__pad0;	/* Alias name for old (!UC_SIGCONTEXT_SS) user-space */
+	};
+	__u64				err;
+	__u64				trapno;
+	__u64				oldmask;
+	__u64				cr2;
+	struct _fpstate __user		*fpstate;	/* Zero when no FPU context */
+#  ifdef __ILP32__
+	__u32				__fpstate_pad;
+#  endif
+	__u64				reserved1[8];
+};
+# endif /* __x86_64__ */
+#endif /* !__KERNEL__ */
+
+#endif /* _UAPI_ASM_X86_SIGCONTEXT_H */
diff --git a/arch/x86/include/uapi/asm/sigcontext32.h b/arch/x86/include/uapi/asm/sigcontext32.h
new file mode 100644
index 000000000..7114801d0
--- /dev/null
+++ b/arch/x86/include/uapi/asm/sigcontext32.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_SIGCONTEXT32_H
+#define _ASM_X86_SIGCONTEXT32_H
+
+/* This is a legacy file - all the type definitions are in sigcontext.h: */
+
+#include <asm/sigcontext.h>
+
+#endif /* _ASM_X86_SIGCONTEXT32_H */
diff --git a/arch/x86/include/uapi/asm/siginfo.h b/arch/x86/include/uapi/asm/siginfo.h
new file mode 100644
index 000000000..6642d8be4
--- /dev/null
+++ b/arch/x86/include/uapi/asm/siginfo.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_SIGINFO_H
+#define _ASM_X86_SIGINFO_H
+
+#ifdef __x86_64__
+# ifdef __ILP32__ /* x32 */
+typedef long long __kernel_si_clock_t __attribute__((aligned(4)));
+#  define __ARCH_SI_CLOCK_T		__kernel_si_clock_t
+#  define __ARCH_SI_ATTRIBUTES		__attribute__((aligned(8)))
+# endif
+#endif
+
+#include <asm-generic/siginfo.h>
+
+#endif /* _ASM_X86_SIGINFO_H */
diff --git a/arch/x86/include/uapi/asm/signal.h b/arch/x86/include/uapi/asm/signal.h
new file mode 100644
index 000000000..777c3a0f4
--- /dev/null
+++ b/arch/x86/include/uapi/asm/signal.h
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_SIGNAL_H
+#define _UAPI_ASM_X86_SIGNAL_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/compiler.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+#define SA_RESTORER	0x04000000
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal-defs.h>
+
+#ifndef __ASSEMBLY__
+
+
+# ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+#ifdef __i386__
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#else /* __i386__ */
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+#endif /* !__i386__ */
+# endif /* ! __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	__kernel_size_t ss_size;
+} stack_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI_ASM_X86_SIGNAL_H */
diff --git a/arch/x86/include/uapi/asm/stat.h b/arch/x86/include/uapi/asm/stat.h
new file mode 100644
index 000000000..9e3982d95
--- /dev/null
+++ b/arch/x86/include/uapi/asm/stat.h
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_STAT_H
+#define _ASM_X86_STAT_H
+
+#include <asm/posix_types.h>
+
+#define STAT_HAVE_NSEC 1
+
+#ifdef __i386__
+struct stat {
+	unsigned long  st_dev;
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned long  st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* We don't need to memset the whole thing just to initialize the padding */
+#define INIT_STRUCT_STAT_PADDING(st) do {	\
+	st.__unused4 = 0;			\
+	st.__unused5 = 0;			\
+} while (0)
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad0[4];
+
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	/* Number 512-byte blocks allocated. */
+	unsigned long long	st_blocks;
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+/* We don't need to memset the whole thing just to initialize the padding */
+#define INIT_STRUCT_STAT64_PADDING(st) do {		\
+	memset(&st.__pad0, 0, sizeof(st.__pad0));	\
+	memset(&st.__pad3, 0, sizeof(st.__pad3));	\
+} while (0)
+
+#else /* __i386__ */
+
+struct stat {
+	__kernel_ulong_t	st_dev;
+	__kernel_ulong_t	st_ino;
+	__kernel_ulong_t	st_nlink;
+
+	unsigned int		st_mode;
+	unsigned int		st_uid;
+	unsigned int		st_gid;
+	unsigned int		__pad0;
+	__kernel_ulong_t	st_rdev;
+	__kernel_long_t		st_size;
+	__kernel_long_t		st_blksize;
+	__kernel_long_t		st_blocks;	/* Number 512-byte blocks allocated. */
+
+	__kernel_ulong_t	st_atime;
+	__kernel_ulong_t	st_atime_nsec;
+	__kernel_ulong_t	st_mtime;
+	__kernel_ulong_t	st_mtime_nsec;
+	__kernel_ulong_t	st_ctime;
+	__kernel_ulong_t	st_ctime_nsec;
+	__kernel_long_t		__unused[3];
+};
+
+/* We don't need to memset the whole thing just to initialize the padding */
+#define INIT_STRUCT_STAT_PADDING(st) do {	\
+	st.__pad0 = 0;				\
+	st.__unused[0] = 0;			\
+	st.__unused[1] = 0;			\
+	st.__unused[2] = 0;			\
+} while (0)
+
+#endif
+
+/* for 32bit emulation and 32 bit kernels */
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+#ifdef __i386__
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+#else
+	unsigned int  st_size;
+	unsigned int  st_atime;
+	unsigned int  st_mtime;
+	unsigned int  st_ctime;
+#endif
+};
+
+#endif /* _ASM_X86_STAT_H */
diff --git a/arch/x86/include/uapi/asm/statfs.h b/arch/x86/include/uapi/asm/statfs.h
new file mode 100644
index 000000000..13c2464cd
--- /dev/null
+++ b/arch/x86/include/uapi/asm/statfs.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_STATFS_H
+#define _ASM_X86_STATFS_H
+
+/*
+ * We need compat_statfs64 to be packed, because the i386 ABI won't
+ * add padding at the end to bring it to a multiple of 8 bytes, but
+ * the x86_64 ABI will.
+ */
+#define ARCH_PACK_COMPAT_STATFS64 __attribute__((packed,aligned(4)))
+
+#include <asm-generic/statfs.h>
+#endif /* _ASM_X86_STATFS_H */
diff --git a/arch/x86/include/uapi/asm/svm.h b/arch/x86/include/uapi/asm/svm.h
new file mode 100644
index 000000000..80e1df482
--- /dev/null
+++ b/arch/x86/include/uapi/asm/svm.h
@@ -0,0 +1,243 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__SVM_H
+#define _UAPI__SVM_H
+
+#define SVM_EXIT_READ_CR0      0x000
+#define SVM_EXIT_READ_CR2      0x002
+#define SVM_EXIT_READ_CR3      0x003
+#define SVM_EXIT_READ_CR4      0x004
+#define SVM_EXIT_READ_CR8      0x008
+#define SVM_EXIT_WRITE_CR0     0x010
+#define SVM_EXIT_WRITE_CR2     0x012
+#define SVM_EXIT_WRITE_CR3     0x013
+#define SVM_EXIT_WRITE_CR4     0x014
+#define SVM_EXIT_WRITE_CR8     0x018
+#define SVM_EXIT_READ_DR0      0x020
+#define SVM_EXIT_READ_DR1      0x021
+#define SVM_EXIT_READ_DR2      0x022
+#define SVM_EXIT_READ_DR3      0x023
+#define SVM_EXIT_READ_DR4      0x024
+#define SVM_EXIT_READ_DR5      0x025
+#define SVM_EXIT_READ_DR6      0x026
+#define SVM_EXIT_READ_DR7      0x027
+#define SVM_EXIT_WRITE_DR0     0x030
+#define SVM_EXIT_WRITE_DR1     0x031
+#define SVM_EXIT_WRITE_DR2     0x032
+#define SVM_EXIT_WRITE_DR3     0x033
+#define SVM_EXIT_WRITE_DR4     0x034
+#define SVM_EXIT_WRITE_DR5     0x035
+#define SVM_EXIT_WRITE_DR6     0x036
+#define SVM_EXIT_WRITE_DR7     0x037
+#define SVM_EXIT_EXCP_BASE     0x040
+#define SVM_EXIT_LAST_EXCP     0x05f
+#define SVM_EXIT_INTR          0x060
+#define SVM_EXIT_NMI           0x061
+#define SVM_EXIT_SMI           0x062
+#define SVM_EXIT_INIT          0x063
+#define SVM_EXIT_VINTR         0x064
+#define SVM_EXIT_CR0_SEL_WRITE 0x065
+#define SVM_EXIT_IDTR_READ     0x066
+#define SVM_EXIT_GDTR_READ     0x067
+#define SVM_EXIT_LDTR_READ     0x068
+#define SVM_EXIT_TR_READ       0x069
+#define SVM_EXIT_IDTR_WRITE    0x06a
+#define SVM_EXIT_GDTR_WRITE    0x06b
+#define SVM_EXIT_LDTR_WRITE    0x06c
+#define SVM_EXIT_TR_WRITE      0x06d
+#define SVM_EXIT_RDTSC         0x06e
+#define SVM_EXIT_RDPMC         0x06f
+#define SVM_EXIT_PUSHF         0x070
+#define SVM_EXIT_POPF          0x071
+#define SVM_EXIT_CPUID         0x072
+#define SVM_EXIT_RSM           0x073
+#define SVM_EXIT_IRET          0x074
+#define SVM_EXIT_SWINT         0x075
+#define SVM_EXIT_INVD          0x076
+#define SVM_EXIT_PAUSE         0x077
+#define SVM_EXIT_HLT           0x078
+#define SVM_EXIT_INVLPG        0x079
+#define SVM_EXIT_INVLPGA       0x07a
+#define SVM_EXIT_IOIO          0x07b
+#define SVM_EXIT_MSR           0x07c
+#define SVM_EXIT_TASK_SWITCH   0x07d
+#define SVM_EXIT_FERR_FREEZE   0x07e
+#define SVM_EXIT_SHUTDOWN      0x07f
+#define SVM_EXIT_VMRUN         0x080
+#define SVM_EXIT_VMMCALL       0x081
+#define SVM_EXIT_VMLOAD        0x082
+#define SVM_EXIT_VMSAVE        0x083
+#define SVM_EXIT_STGI          0x084
+#define SVM_EXIT_CLGI          0x085
+#define SVM_EXIT_SKINIT        0x086
+#define SVM_EXIT_RDTSCP        0x087
+#define SVM_EXIT_ICEBP         0x088
+#define SVM_EXIT_WBINVD        0x089
+#define SVM_EXIT_MONITOR       0x08a
+#define SVM_EXIT_MWAIT         0x08b
+#define SVM_EXIT_MWAIT_COND    0x08c
+#define SVM_EXIT_XSETBV        0x08d
+#define SVM_EXIT_RDPRU         0x08e
+#define SVM_EXIT_EFER_WRITE_TRAP		0x08f
+#define SVM_EXIT_CR0_WRITE_TRAP			0x090
+#define SVM_EXIT_CR1_WRITE_TRAP			0x091
+#define SVM_EXIT_CR2_WRITE_TRAP			0x092
+#define SVM_EXIT_CR3_WRITE_TRAP			0x093
+#define SVM_EXIT_CR4_WRITE_TRAP			0x094
+#define SVM_EXIT_CR5_WRITE_TRAP			0x095
+#define SVM_EXIT_CR6_WRITE_TRAP			0x096
+#define SVM_EXIT_CR7_WRITE_TRAP			0x097
+#define SVM_EXIT_CR8_WRITE_TRAP			0x098
+#define SVM_EXIT_CR9_WRITE_TRAP			0x099
+#define SVM_EXIT_CR10_WRITE_TRAP		0x09a
+#define SVM_EXIT_CR11_WRITE_TRAP		0x09b
+#define SVM_EXIT_CR12_WRITE_TRAP		0x09c
+#define SVM_EXIT_CR13_WRITE_TRAP		0x09d
+#define SVM_EXIT_CR14_WRITE_TRAP		0x09e
+#define SVM_EXIT_CR15_WRITE_TRAP		0x09f
+#define SVM_EXIT_INVPCID       0x0a2
+#define SVM_EXIT_NPF           0x400
+#define SVM_EXIT_AVIC_INCOMPLETE_IPI		0x401
+#define SVM_EXIT_AVIC_UNACCELERATED_ACCESS	0x402
+#define SVM_EXIT_VMGEXIT       0x403
+
+/* SEV-ES software-defined VMGEXIT events */
+#define SVM_VMGEXIT_MMIO_READ			0x80000001
+#define SVM_VMGEXIT_MMIO_WRITE			0x80000002
+#define SVM_VMGEXIT_NMI_COMPLETE		0x80000003
+#define SVM_VMGEXIT_AP_HLT_LOOP			0x80000004
+#define SVM_VMGEXIT_AP_JUMP_TABLE		0x80000005
+#define SVM_VMGEXIT_SET_AP_JUMP_TABLE		0
+#define SVM_VMGEXIT_GET_AP_JUMP_TABLE		1
+#define SVM_VMGEXIT_PSC				0x80000010
+#define SVM_VMGEXIT_GUEST_REQUEST		0x80000011
+#define SVM_VMGEXIT_EXT_GUEST_REQUEST		0x80000012
+#define SVM_VMGEXIT_AP_CREATION			0x80000013
+#define SVM_VMGEXIT_AP_CREATE_ON_INIT		0
+#define SVM_VMGEXIT_AP_CREATE			1
+#define SVM_VMGEXIT_AP_DESTROY			2
+#define SVM_VMGEXIT_HV_FEATURES			0x8000fffd
+#define SVM_VMGEXIT_TERM_REQUEST		0x8000fffe
+#define SVM_VMGEXIT_TERM_REASON(reason_set, reason_code)	\
+	/* SW_EXITINFO1[3:0] */					\
+	(((((u64)reason_set) & 0xf)) |				\
+	/* SW_EXITINFO1[11:4] */				\
+	((((u64)reason_code) & 0xff) << 4))
+#define SVM_VMGEXIT_UNSUPPORTED_EVENT		0x8000ffff
+
+/* Exit code reserved for hypervisor/software use */
+#define SVM_EXIT_SW				0xf0000000
+
+#define SVM_EXIT_ERR           -1
+
+#define SVM_EXIT_REASONS \
+	{ SVM_EXIT_READ_CR0,    "read_cr0" }, \
+	{ SVM_EXIT_READ_CR2,    "read_cr2" }, \
+	{ SVM_EXIT_READ_CR3,    "read_cr3" }, \
+	{ SVM_EXIT_READ_CR4,    "read_cr4" }, \
+	{ SVM_EXIT_READ_CR8,    "read_cr8" }, \
+	{ SVM_EXIT_WRITE_CR0,   "write_cr0" }, \
+	{ SVM_EXIT_WRITE_CR2,   "write_cr2" }, \
+	{ SVM_EXIT_WRITE_CR3,   "write_cr3" }, \
+	{ SVM_EXIT_WRITE_CR4,   "write_cr4" }, \
+	{ SVM_EXIT_WRITE_CR8,   "write_cr8" }, \
+	{ SVM_EXIT_READ_DR0,    "read_dr0" }, \
+	{ SVM_EXIT_READ_DR1,    "read_dr1" }, \
+	{ SVM_EXIT_READ_DR2,    "read_dr2" }, \
+	{ SVM_EXIT_READ_DR3,    "read_dr3" }, \
+	{ SVM_EXIT_READ_DR4,    "read_dr4" }, \
+	{ SVM_EXIT_READ_DR5,    "read_dr5" }, \
+	{ SVM_EXIT_READ_DR6,    "read_dr6" }, \
+	{ SVM_EXIT_READ_DR7,    "read_dr7" }, \
+	{ SVM_EXIT_WRITE_DR0,   "write_dr0" }, \
+	{ SVM_EXIT_WRITE_DR1,   "write_dr1" }, \
+	{ SVM_EXIT_WRITE_DR2,   "write_dr2" }, \
+	{ SVM_EXIT_WRITE_DR3,   "write_dr3" }, \
+	{ SVM_EXIT_WRITE_DR4,   "write_dr4" }, \
+	{ SVM_EXIT_WRITE_DR5,   "write_dr5" }, \
+	{ SVM_EXIT_WRITE_DR6,   "write_dr6" }, \
+	{ SVM_EXIT_WRITE_DR7,   "write_dr7" }, \
+	{ SVM_EXIT_EXCP_BASE + DE_VECTOR,       "DE excp" }, \
+	{ SVM_EXIT_EXCP_BASE + DB_VECTOR,       "DB excp" }, \
+	{ SVM_EXIT_EXCP_BASE + BP_VECTOR,       "BP excp" }, \
+	{ SVM_EXIT_EXCP_BASE + OF_VECTOR,       "OF excp" }, \
+	{ SVM_EXIT_EXCP_BASE + BR_VECTOR,       "BR excp" }, \
+	{ SVM_EXIT_EXCP_BASE + UD_VECTOR,       "UD excp" }, \
+	{ SVM_EXIT_EXCP_BASE + NM_VECTOR,       "NM excp" }, \
+	{ SVM_EXIT_EXCP_BASE + DF_VECTOR,       "DF excp" }, \
+	{ SVM_EXIT_EXCP_BASE + TS_VECTOR,       "TS excp" }, \
+	{ SVM_EXIT_EXCP_BASE + NP_VECTOR,       "NP excp" }, \
+	{ SVM_EXIT_EXCP_BASE + SS_VECTOR,       "SS excp" }, \
+	{ SVM_EXIT_EXCP_BASE + GP_VECTOR,       "GP excp" }, \
+	{ SVM_EXIT_EXCP_BASE + PF_VECTOR,       "PF excp" }, \
+	{ SVM_EXIT_EXCP_BASE + MF_VECTOR,       "MF excp" }, \
+	{ SVM_EXIT_EXCP_BASE + AC_VECTOR,       "AC excp" }, \
+	{ SVM_EXIT_EXCP_BASE + MC_VECTOR,       "MC excp" }, \
+	{ SVM_EXIT_EXCP_BASE + XM_VECTOR,       "XF excp" }, \
+	{ SVM_EXIT_INTR,        "interrupt" }, \
+	{ SVM_EXIT_NMI,         "nmi" }, \
+	{ SVM_EXIT_SMI,         "smi" }, \
+	{ SVM_EXIT_INIT,        "init" }, \
+	{ SVM_EXIT_VINTR,       "vintr" }, \
+	{ SVM_EXIT_CR0_SEL_WRITE, "cr0_sel_write" }, \
+	{ SVM_EXIT_IDTR_READ,   "read_idtr" }, \
+	{ SVM_EXIT_GDTR_READ,   "read_gdtr" }, \
+	{ SVM_EXIT_LDTR_READ,   "read_ldtr" }, \
+	{ SVM_EXIT_TR_READ,     "read_rt" }, \
+	{ SVM_EXIT_IDTR_WRITE,  "write_idtr" }, \
+	{ SVM_EXIT_GDTR_WRITE,  "write_gdtr" }, \
+	{ SVM_EXIT_LDTR_WRITE,  "write_ldtr" }, \
+	{ SVM_EXIT_TR_WRITE,    "write_rt" }, \
+	{ SVM_EXIT_RDTSC,       "rdtsc" }, \
+	{ SVM_EXIT_RDPMC,       "rdpmc" }, \
+	{ SVM_EXIT_PUSHF,       "pushf" }, \
+	{ SVM_EXIT_POPF,        "popf" }, \
+	{ SVM_EXIT_CPUID,       "cpuid" }, \
+	{ SVM_EXIT_RSM,         "rsm" }, \
+	{ SVM_EXIT_IRET,        "iret" }, \
+	{ SVM_EXIT_SWINT,       "swint" }, \
+	{ SVM_EXIT_INVD,        "invd" }, \
+	{ SVM_EXIT_PAUSE,       "pause" }, \
+	{ SVM_EXIT_HLT,         "hlt" }, \
+	{ SVM_EXIT_INVLPG,      "invlpg" }, \
+	{ SVM_EXIT_INVLPGA,     "invlpga" }, \
+	{ SVM_EXIT_IOIO,        "io" }, \
+	{ SVM_EXIT_MSR,         "msr" }, \
+	{ SVM_EXIT_TASK_SWITCH, "task_switch" }, \
+	{ SVM_EXIT_FERR_FREEZE, "ferr_freeze" }, \
+	{ SVM_EXIT_SHUTDOWN,    "shutdown" }, \
+	{ SVM_EXIT_VMRUN,       "vmrun" }, \
+	{ SVM_EXIT_VMMCALL,     "hypercall" }, \
+	{ SVM_EXIT_VMLOAD,      "vmload" }, \
+	{ SVM_EXIT_VMSAVE,      "vmsave" }, \
+	{ SVM_EXIT_STGI,        "stgi" }, \
+	{ SVM_EXIT_CLGI,        "clgi" }, \
+	{ SVM_EXIT_SKINIT,      "skinit" }, \
+	{ SVM_EXIT_RDTSCP,      "rdtscp" }, \
+	{ SVM_EXIT_ICEBP,       "icebp" }, \
+	{ SVM_EXIT_WBINVD,      "wbinvd" }, \
+	{ SVM_EXIT_MONITOR,     "monitor" }, \
+	{ SVM_EXIT_MWAIT,       "mwait" }, \
+	{ SVM_EXIT_XSETBV,      "xsetbv" }, \
+	{ SVM_EXIT_EFER_WRITE_TRAP,	"write_efer_trap" }, \
+	{ SVM_EXIT_CR0_WRITE_TRAP,	"write_cr0_trap" }, \
+	{ SVM_EXIT_CR4_WRITE_TRAP,	"write_cr4_trap" }, \
+	{ SVM_EXIT_CR8_WRITE_TRAP,	"write_cr8_trap" }, \
+	{ SVM_EXIT_INVPCID,     "invpcid" }, \
+	{ SVM_EXIT_NPF,         "npf" }, \
+	{ SVM_EXIT_AVIC_INCOMPLETE_IPI,		"avic_incomplete_ipi" }, \
+	{ SVM_EXIT_AVIC_UNACCELERATED_ACCESS,   "avic_unaccelerated_access" }, \
+	{ SVM_EXIT_VMGEXIT,		"vmgexit" }, \
+	{ SVM_VMGEXIT_MMIO_READ,	"vmgexit_mmio_read" }, \
+	{ SVM_VMGEXIT_MMIO_WRITE,	"vmgexit_mmio_write" }, \
+	{ SVM_VMGEXIT_NMI_COMPLETE,	"vmgexit_nmi_complete" }, \
+	{ SVM_VMGEXIT_AP_HLT_LOOP,	"vmgexit_ap_hlt_loop" }, \
+	{ SVM_VMGEXIT_AP_JUMP_TABLE,	"vmgexit_ap_jump_table" }, \
+	{ SVM_VMGEXIT_PSC,		"vmgexit_page_state_change" }, \
+	{ SVM_VMGEXIT_GUEST_REQUEST,	"vmgexit_guest_request" }, \
+	{ SVM_VMGEXIT_EXT_GUEST_REQUEST, "vmgexit_ext_guest_request" }, \
+	{ SVM_VMGEXIT_AP_CREATION,	"vmgexit_ap_creation" }, \
+	{ SVM_VMGEXIT_HV_FEATURES,	"vmgexit_hypervisor_feature" }, \
+	{ SVM_EXIT_ERR,         "invalid_guest_state" }
+
+
+#endif /* _UAPI__SVM_H */
diff --git a/arch/x86/include/uapi/asm/swab.h b/arch/x86/include/uapi/asm/swab.h
new file mode 100644
index 000000000..cd3fd8ddb
--- /dev/null
+++ b/arch/x86/include/uapi/asm/swab.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_SWAB_H
+#define _ASM_X86_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+	asm("bswapl %0" : "=r" (val) : "0" (val));
+	return val;
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __attribute_const__ __u64 __arch_swab64(__u64 val)
+{
+#ifdef __i386__
+	union {
+		struct {
+			__u32 a;
+			__u32 b;
+		} s;
+		__u64 u;
+	} v;
+	v.u = val;
+	asm("bswapl %0 ; bswapl %1 ; xchgl %0,%1"
+	    : "=r" (v.s.a), "=r" (v.s.b)
+	    : "0" (v.s.a), "1" (v.s.b));
+	return v.u;
+#else /* __i386__ */
+	asm("bswapq %0" : "=r" (val) : "0" (val));
+	return val;
+#endif
+}
+#define __arch_swab64 __arch_swab64
+
+#endif /* _ASM_X86_SWAB_H */
diff --git a/arch/x86/include/uapi/asm/ucontext.h b/arch/x86/include/uapi/asm/ucontext.h
new file mode 100644
index 000000000..5657b7a49
--- /dev/null
+++ b/arch/x86/include/uapi/asm/ucontext.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_UCONTEXT_H
+#define _ASM_X86_UCONTEXT_H
+
+/*
+ * Indicates the presence of extended state information in the memory
+ * layout pointed by the fpstate pointer in the ucontext's sigcontext
+ * struct (uc_mcontext).
+ */
+#define UC_FP_XSTATE	0x1
+
+#ifdef __x86_64__
+/*
+ * UC_SIGCONTEXT_SS will be set when delivering 64-bit or x32 signals on
+ * kernels that save SS in the sigcontext.  All kernels that set
+ * UC_SIGCONTEXT_SS will correctly restore at least the low 32 bits of esp
+ * regardless of SS (i.e. they implement espfix).
+ *
+ * Kernels that set UC_SIGCONTEXT_SS will also set UC_STRICT_RESTORE_SS
+ * when delivering a signal that came from 64-bit code.
+ *
+ * Sigreturn restores SS as follows:
+ *
+ * if (saved SS is valid || UC_STRICT_RESTORE_SS is set ||
+ *     saved CS is not 64-bit)
+ *         new SS = saved SS  (will fail IRET and signal if invalid)
+ * else
+ *         new SS = a flat 32-bit data segment
+ *
+ * This behavior serves three purposes:
+ *
+ * - Legacy programs that construct a 64-bit sigcontext from scratch
+ *   with zero or garbage in the SS slot (e.g. old CRIU) and call
+ *   sigreturn will still work.
+ *
+ * - Old DOSEMU versions sometimes catch a signal from a segmented
+ *   context, delete the old SS segment (with modify_ldt), and change
+ *   the saved CS to a 64-bit segment.  These DOSEMU versions expect
+ *   sigreturn to send them back to 64-bit mode without killing them,
+ *   despite the fact that the SS selector when the signal was raised is
+ *   no longer valid.  UC_STRICT_RESTORE_SS will be clear, so the kernel
+ *   will fix up SS for these DOSEMU versions.
+ *
+ * - Old and new programs that catch a signal and return without
+ *   modifying the saved context will end up in exactly the state they
+ *   started in, even if they were running in a segmented context when
+ *   the signal was raised..  Old kernels would lose track of the
+ *   previous SS value.
+ */
+#define UC_SIGCONTEXT_SS	0x2
+#define UC_STRICT_RESTORE_SS	0x4
+#endif
+
+#include <asm-generic/ucontext.h>
+
+#endif /* _ASM_X86_UCONTEXT_H */
diff --git a/arch/x86/include/uapi/asm/unistd.h b/arch/x86/include/uapi/asm/unistd.h
new file mode 100644
index 000000000..be5e2e747
--- /dev/null
+++ b/arch/x86/include/uapi/asm/unistd.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_UNISTD_H
+#define _UAPI_ASM_X86_UNISTD_H
+
+/*
+ * x32 syscall flag bit.  Some user programs expect syscall NR macros
+ * and __X32_SYSCALL_BIT to have type int, even though syscall numbers
+ * are, for practical purposes, unsigned long.
+ *
+ * Fortunately, expressions like (nr & ~__X32_SYSCALL_BIT) do the right
+ * thing regardless.
+ */
+#define __X32_SYSCALL_BIT	0x40000000
+
+#ifndef __KERNEL__
+# ifdef __i386__
+#  include <asm/unistd_32.h>
+# elif defined(__ILP32__)
+#  include <asm/unistd_x32.h>
+# else
+#  include <asm/unistd_64.h>
+# endif
+#endif
+
+#endif /* _UAPI_ASM_X86_UNISTD_H */
diff --git a/arch/x86/include/uapi/asm/vm86.h b/arch/x86/include/uapi/asm/vm86.h
new file mode 100644
index 000000000..18909b805
--- /dev/null
+++ b/arch/x86/include/uapi/asm/vm86.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_VM86_H
+#define _UAPI_ASM_X86_VM86_H
+
+/*
+ * I'm guessing at the VIF/VIP flag usage, but hope that this is how
+ * the Pentium uses them. Linux will return from vm86 mode when both
+ * VIF and VIP is set.
+ *
+ * On a Pentium, we could probably optimize the virtual flags directly
+ * in the eflags register instead of doing it "by hand" in vflags...
+ *
+ * Linus
+ */
+
+#include <asm/processor-flags.h>
+
+#define BIOSSEG		0x0f000
+
+#define CPU_086		0
+#define CPU_186		1
+#define CPU_286		2
+#define CPU_386		3
+#define CPU_486		4
+#define CPU_586		5
+
+/*
+ * Return values for the 'vm86()' system call
+ */
+#define VM86_TYPE(retval)	((retval) & 0xff)
+#define VM86_ARG(retval)	((retval) >> 8)
+
+#define VM86_SIGNAL	0	/* return due to signal */
+#define VM86_UNKNOWN	1	/* unhandled GP fault
+				   - IO-instruction or similar */
+#define VM86_INTx	2	/* int3/int x instruction (ARG = x) */
+#define VM86_STI	3	/* sti/popf/iret instruction enabled
+				   virtual interrupts */
+
+/*
+ * Additional return values when invoking new vm86()
+ */
+#define VM86_PICRETURN	4	/* return due to pending PIC request */
+#define VM86_TRAP	6	/* return due to DOS-debugger request */
+
+/*
+ * function codes when invoking new vm86()
+ */
+#define VM86_PLUS_INSTALL_CHECK	0
+#define VM86_ENTER		1
+#define VM86_ENTER_NO_BYPASS	2
+#define	VM86_REQUEST_IRQ	3
+#define VM86_FREE_IRQ		4
+#define VM86_GET_IRQ_BITS	5
+#define VM86_GET_AND_RESET_IRQ	6
+
+/*
+ * This is the stack-layout seen by the user space program when we have
+ * done a translation of "SAVE_ALL" from vm86 mode. The real kernel layout
+ * is 'kernel_vm86_regs' (see below).
+ */
+
+struct vm86_regs {
+/*
+ * normal regs, with special meaning for the segment descriptors..
+ */
+	long ebx;
+	long ecx;
+	long edx;
+	long esi;
+	long edi;
+	long ebp;
+	long eax;
+	long __null_ds;
+	long __null_es;
+	long __null_fs;
+	long __null_gs;
+	long orig_eax;
+	long eip;
+	unsigned short cs, __csh;
+	long eflags;
+	long esp;
+	unsigned short ss, __ssh;
+/*
+ * these are specific to v86 mode:
+ */
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned short fs, __fsh;
+	unsigned short gs, __gsh;
+};
+
+struct revectored_struct {
+	unsigned long __map[8];			/* 256 bits */
+};
+
+struct vm86_struct {
+	struct vm86_regs regs;
+	unsigned long flags;
+	unsigned long screen_bitmap;		/* unused, preserved by vm86() */
+	unsigned long cpu_type;
+	struct revectored_struct int_revectored;
+	struct revectored_struct int21_revectored;
+};
+
+/*
+ * flags masks
+ */
+#define VM86_SCREEN_BITMAP	0x0001        /* no longer supported */
+
+struct vm86plus_info_struct {
+	unsigned long force_return_for_pic:1;
+	unsigned long vm86dbg_active:1;       /* for debugger */
+	unsigned long vm86dbg_TFpendig:1;     /* for debugger */
+	unsigned long unused:28;
+	unsigned long is_vm86pus:1;	      /* for vm86 internal use */
+	unsigned char vm86dbg_intxxtab[32];   /* for debugger */
+};
+struct vm86plus_struct {
+	struct vm86_regs regs;
+	unsigned long flags;
+	unsigned long screen_bitmap;
+	unsigned long cpu_type;
+	struct revectored_struct int_revectored;
+	struct revectored_struct int21_revectored;
+	struct vm86plus_info_struct vm86plus;
+};
+
+
+#endif /* _UAPI_ASM_X86_VM86_H */
diff --git a/arch/x86/include/uapi/asm/vmx.h b/arch/x86/include/uapi/asm/vmx.h
new file mode 100644
index 000000000..a5faf6d88
--- /dev/null
+++ b/arch/x86/include/uapi/asm/vmx.h
@@ -0,0 +1,167 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * vmx.h: VMX Architecture related definitions
+ * Copyright (c) 2004, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * A few random additions are:
+ * Copyright (C) 2006 Qumranet
+ *    Avi Kivity <avi@qumranet.com>
+ *    Yaniv Kamay <yaniv@qumranet.com>
+ *
+ */
+#ifndef _UAPIVMX_H
+#define _UAPIVMX_H
+
+
+#define VMX_EXIT_REASONS_FAILED_VMENTRY         0x80000000
+#define VMX_EXIT_REASONS_SGX_ENCLAVE_MODE	0x08000000
+
+#define EXIT_REASON_EXCEPTION_NMI       0
+#define EXIT_REASON_EXTERNAL_INTERRUPT  1
+#define EXIT_REASON_TRIPLE_FAULT        2
+#define EXIT_REASON_INIT_SIGNAL			3
+#define EXIT_REASON_SIPI_SIGNAL         4
+
+#define EXIT_REASON_INTERRUPT_WINDOW    7
+#define EXIT_REASON_NMI_WINDOW          8
+#define EXIT_REASON_TASK_SWITCH         9
+#define EXIT_REASON_CPUID               10
+#define EXIT_REASON_HLT                 12
+#define EXIT_REASON_INVD                13
+#define EXIT_REASON_INVLPG              14
+#define EXIT_REASON_RDPMC               15
+#define EXIT_REASON_RDTSC               16
+#define EXIT_REASON_VMCALL              18
+#define EXIT_REASON_VMCLEAR             19
+#define EXIT_REASON_VMLAUNCH            20
+#define EXIT_REASON_VMPTRLD             21
+#define EXIT_REASON_VMPTRST             22
+#define EXIT_REASON_VMREAD              23
+#define EXIT_REASON_VMRESUME            24
+#define EXIT_REASON_VMWRITE             25
+#define EXIT_REASON_VMOFF               26
+#define EXIT_REASON_VMON                27
+#define EXIT_REASON_CR_ACCESS           28
+#define EXIT_REASON_DR_ACCESS           29
+#define EXIT_REASON_IO_INSTRUCTION      30
+#define EXIT_REASON_MSR_READ            31
+#define EXIT_REASON_MSR_WRITE           32
+#define EXIT_REASON_INVALID_STATE       33
+#define EXIT_REASON_MSR_LOAD_FAIL       34
+#define EXIT_REASON_MWAIT_INSTRUCTION   36
+#define EXIT_REASON_MONITOR_TRAP_FLAG   37
+#define EXIT_REASON_MONITOR_INSTRUCTION 39
+#define EXIT_REASON_PAUSE_INSTRUCTION   40
+#define EXIT_REASON_MCE_DURING_VMENTRY  41
+#define EXIT_REASON_TPR_BELOW_THRESHOLD 43
+#define EXIT_REASON_APIC_ACCESS         44
+#define EXIT_REASON_EOI_INDUCED         45
+#define EXIT_REASON_GDTR_IDTR           46
+#define EXIT_REASON_LDTR_TR             47
+#define EXIT_REASON_EPT_VIOLATION       48
+#define EXIT_REASON_EPT_MISCONFIG       49
+#define EXIT_REASON_INVEPT              50
+#define EXIT_REASON_RDTSCP              51
+#define EXIT_REASON_PREEMPTION_TIMER    52
+#define EXIT_REASON_INVVPID             53
+#define EXIT_REASON_WBINVD              54
+#define EXIT_REASON_XSETBV              55
+#define EXIT_REASON_APIC_WRITE          56
+#define EXIT_REASON_RDRAND              57
+#define EXIT_REASON_INVPCID             58
+#define EXIT_REASON_VMFUNC              59
+#define EXIT_REASON_ENCLS               60
+#define EXIT_REASON_RDSEED              61
+#define EXIT_REASON_PML_FULL            62
+#define EXIT_REASON_XSAVES              63
+#define EXIT_REASON_XRSTORS             64
+#define EXIT_REASON_UMWAIT              67
+#define EXIT_REASON_TPAUSE              68
+#define EXIT_REASON_BUS_LOCK            74
+#define EXIT_REASON_NOTIFY              75
+
+#define VMX_EXIT_REASONS \
+	{ EXIT_REASON_EXCEPTION_NMI,         "EXCEPTION_NMI" }, \
+	{ EXIT_REASON_EXTERNAL_INTERRUPT,    "EXTERNAL_INTERRUPT" }, \
+	{ EXIT_REASON_TRIPLE_FAULT,          "TRIPLE_FAULT" }, \
+	{ EXIT_REASON_INIT_SIGNAL,           "INIT_SIGNAL" }, \
+	{ EXIT_REASON_SIPI_SIGNAL,           "SIPI_SIGNAL" }, \
+	{ EXIT_REASON_INTERRUPT_WINDOW,      "INTERRUPT_WINDOW" }, \
+	{ EXIT_REASON_NMI_WINDOW,            "NMI_WINDOW" }, \
+	{ EXIT_REASON_TASK_SWITCH,           "TASK_SWITCH" }, \
+	{ EXIT_REASON_CPUID,                 "CPUID" }, \
+	{ EXIT_REASON_HLT,                   "HLT" }, \
+	{ EXIT_REASON_INVD,                  "INVD" }, \
+	{ EXIT_REASON_INVLPG,                "INVLPG" }, \
+	{ EXIT_REASON_RDPMC,                 "RDPMC" }, \
+	{ EXIT_REASON_RDTSC,                 "RDTSC" }, \
+	{ EXIT_REASON_VMCALL,                "VMCALL" }, \
+	{ EXIT_REASON_VMCLEAR,               "VMCLEAR" }, \
+	{ EXIT_REASON_VMLAUNCH,              "VMLAUNCH" }, \
+	{ EXIT_REASON_VMPTRLD,               "VMPTRLD" }, \
+	{ EXIT_REASON_VMPTRST,               "VMPTRST" }, \
+	{ EXIT_REASON_VMREAD,                "VMREAD" }, \
+	{ EXIT_REASON_VMRESUME,              "VMRESUME" }, \
+	{ EXIT_REASON_VMWRITE,               "VMWRITE" }, \
+	{ EXIT_REASON_VMOFF,                 "VMOFF" }, \
+	{ EXIT_REASON_VMON,                  "VMON" }, \
+	{ EXIT_REASON_CR_ACCESS,             "CR_ACCESS" }, \
+	{ EXIT_REASON_DR_ACCESS,             "DR_ACCESS" }, \
+	{ EXIT_REASON_IO_INSTRUCTION,        "IO_INSTRUCTION" }, \
+	{ EXIT_REASON_MSR_READ,              "MSR_READ" }, \
+	{ EXIT_REASON_MSR_WRITE,             "MSR_WRITE" }, \
+	{ EXIT_REASON_INVALID_STATE,         "INVALID_STATE" }, \
+	{ EXIT_REASON_MSR_LOAD_FAIL,         "MSR_LOAD_FAIL" }, \
+	{ EXIT_REASON_MWAIT_INSTRUCTION,     "MWAIT_INSTRUCTION" }, \
+	{ EXIT_REASON_MONITOR_TRAP_FLAG,     "MONITOR_TRAP_FLAG" }, \
+	{ EXIT_REASON_MONITOR_INSTRUCTION,   "MONITOR_INSTRUCTION" }, \
+	{ EXIT_REASON_PAUSE_INSTRUCTION,     "PAUSE_INSTRUCTION" }, \
+	{ EXIT_REASON_MCE_DURING_VMENTRY,    "MCE_DURING_VMENTRY" }, \
+	{ EXIT_REASON_TPR_BELOW_THRESHOLD,   "TPR_BELOW_THRESHOLD" }, \
+	{ EXIT_REASON_APIC_ACCESS,           "APIC_ACCESS" }, \
+	{ EXIT_REASON_EOI_INDUCED,           "EOI_INDUCED" }, \
+	{ EXIT_REASON_GDTR_IDTR,             "GDTR_IDTR" }, \
+	{ EXIT_REASON_LDTR_TR,               "LDTR_TR" }, \
+	{ EXIT_REASON_EPT_VIOLATION,         "EPT_VIOLATION" }, \
+	{ EXIT_REASON_EPT_MISCONFIG,         "EPT_MISCONFIG" }, \
+	{ EXIT_REASON_INVEPT,                "INVEPT" }, \
+	{ EXIT_REASON_RDTSCP,                "RDTSCP" }, \
+	{ EXIT_REASON_PREEMPTION_TIMER,      "PREEMPTION_TIMER" }, \
+	{ EXIT_REASON_INVVPID,               "INVVPID" }, \
+	{ EXIT_REASON_WBINVD,                "WBINVD" }, \
+	{ EXIT_REASON_XSETBV,                "XSETBV" }, \
+	{ EXIT_REASON_APIC_WRITE,            "APIC_WRITE" }, \
+	{ EXIT_REASON_RDRAND,                "RDRAND" }, \
+	{ EXIT_REASON_INVPCID,               "INVPCID" }, \
+	{ EXIT_REASON_VMFUNC,                "VMFUNC" }, \
+	{ EXIT_REASON_ENCLS,                 "ENCLS" }, \
+	{ EXIT_REASON_RDSEED,                "RDSEED" }, \
+	{ EXIT_REASON_PML_FULL,              "PML_FULL" }, \
+	{ EXIT_REASON_XSAVES,                "XSAVES" }, \
+	{ EXIT_REASON_XRSTORS,               "XRSTORS" }, \
+	{ EXIT_REASON_UMWAIT,                "UMWAIT" }, \
+	{ EXIT_REASON_TPAUSE,                "TPAUSE" }, \
+	{ EXIT_REASON_BUS_LOCK,              "BUS_LOCK" }, \
+	{ EXIT_REASON_NOTIFY,                "NOTIFY" }
+
+#define VMX_EXIT_REASON_FLAGS \
+	{ VMX_EXIT_REASONS_FAILED_VMENTRY,	"FAILED_VMENTRY" }
+
+#define VMX_ABORT_SAVE_GUEST_MSR_FAIL        1
+#define VMX_ABORT_LOAD_HOST_PDPTE_FAIL       2
+#define VMX_ABORT_LOAD_HOST_MSR_FAIL         4
+
+#endif /* _UAPIVMX_H */
diff --git a/arch/x86/include/uapi/asm/vsyscall.h b/arch/x86/include/uapi/asm/vsyscall.h
new file mode 100644
index 000000000..75275f547
--- /dev/null
+++ b/arch/x86/include/uapi/asm/vsyscall.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_VSYSCALL_H
+#define _UAPI_ASM_X86_VSYSCALL_H
+
+enum vsyscall_num {
+	__NR_vgettimeofday,
+	__NR_vtime,
+	__NR_vgetcpu,
+};
+
+#define VSYSCALL_ADDR (-10UL << 20)
+
+#endif /* _UAPI_ASM_X86_VSYSCALL_H */
-- 
cgit v1.2.3