From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/kernel/cpu/aperfmperf.c | 460 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 460 insertions(+) create mode 100644 arch/x86/kernel/cpu/aperfmperf.c (limited to 'arch/x86/kernel/cpu/aperfmperf.c') diff --git a/arch/x86/kernel/cpu/aperfmperf.c b/arch/x86/kernel/cpu/aperfmperf.c new file mode 100644 index 000000000..fdbb5f074 --- /dev/null +++ b/arch/x86/kernel/cpu/aperfmperf.c @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * x86 APERF/MPERF KHz calculation for + * /sys/.../cpufreq/scaling_cur_freq + * + * Copyright (C) 2017 Intel Corp. + * Author: Len Brown + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "cpu.h" + +struct aperfmperf { + seqcount_t seq; + unsigned long last_update; + u64 acnt; + u64 mcnt; + u64 aperf; + u64 mperf; +}; + +static DEFINE_PER_CPU_SHARED_ALIGNED(struct aperfmperf, cpu_samples) = { + .seq = SEQCNT_ZERO(cpu_samples.seq) +}; + +static void init_counter_refs(void) +{ + u64 aperf, mperf; + + rdmsrl(MSR_IA32_APERF, aperf); + rdmsrl(MSR_IA32_MPERF, mperf); + + this_cpu_write(cpu_samples.aperf, aperf); + this_cpu_write(cpu_samples.mperf, mperf); +} + +#if defined(CONFIG_X86_64) && defined(CONFIG_SMP) +/* + * APERF/MPERF frequency ratio computation. + * + * The scheduler wants to do frequency invariant accounting and needs a <1 + * ratio to account for the 'current' frequency, corresponding to + * freq_curr / freq_max. + * + * Since the frequency freq_curr on x86 is controlled by micro-controller and + * our P-state setting is little more than a request/hint, we need to observe + * the effective frequency 'BusyMHz', i.e. the average frequency over a time + * interval after discarding idle time. This is given by: + * + * BusyMHz = delta_APERF / delta_MPERF * freq_base + * + * where freq_base is the max non-turbo P-state. + * + * The freq_max term has to be set to a somewhat arbitrary value, because we + * can't know which turbo states will be available at a given point in time: + * it all depends on the thermal headroom of the entire package. We set it to + * the turbo level with 4 cores active. + * + * Benchmarks show that's a good compromise between the 1C turbo ratio + * (freq_curr/freq_max would rarely reach 1) and something close to freq_base, + * which would ignore the entire turbo range (a conspicuous part, making + * freq_curr/freq_max always maxed out). + * + * An exception to the heuristic above is the Atom uarch, where we choose the + * highest turbo level for freq_max since Atom's are generally oriented towards + * power efficiency. + * + * Setting freq_max to anything less than the 1C turbo ratio makes the ratio + * freq_curr / freq_max to eventually grow >1, in which case we clip it to 1. + */ + +DEFINE_STATIC_KEY_FALSE(arch_scale_freq_key); + +static u64 arch_turbo_freq_ratio = SCHED_CAPACITY_SCALE; +static u64 arch_max_freq_ratio = SCHED_CAPACITY_SCALE; + +void arch_set_max_freq_ratio(bool turbo_disabled) +{ + arch_max_freq_ratio = turbo_disabled ? SCHED_CAPACITY_SCALE : + arch_turbo_freq_ratio; +} +EXPORT_SYMBOL_GPL(arch_set_max_freq_ratio); + +static bool __init turbo_disabled(void) +{ + u64 misc_en; + int err; + + err = rdmsrl_safe(MSR_IA32_MISC_ENABLE, &misc_en); + if (err) + return false; + + return (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE); +} + +static bool __init slv_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq) +{ + int err; + + err = rdmsrl_safe(MSR_ATOM_CORE_RATIOS, base_freq); + if (err) + return false; + + err = rdmsrl_safe(MSR_ATOM_CORE_TURBO_RATIOS, turbo_freq); + if (err) + return false; + + *base_freq = (*base_freq >> 16) & 0x3F; /* max P state */ + *turbo_freq = *turbo_freq & 0x3F; /* 1C turbo */ + + return true; +} + +#define X86_MATCH(model) \ + X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 6, \ + INTEL_FAM6_##model, X86_FEATURE_APERFMPERF, NULL) + +static const struct x86_cpu_id has_knl_turbo_ratio_limits[] __initconst = { + X86_MATCH(XEON_PHI_KNL), + X86_MATCH(XEON_PHI_KNM), + {} +}; + +static const struct x86_cpu_id has_skx_turbo_ratio_limits[] __initconst = { + X86_MATCH(SKYLAKE_X), + {} +}; + +static const struct x86_cpu_id has_glm_turbo_ratio_limits[] __initconst = { + X86_MATCH(ATOM_GOLDMONT), + X86_MATCH(ATOM_GOLDMONT_D), + X86_MATCH(ATOM_GOLDMONT_PLUS), + {} +}; + +static bool __init knl_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq, + int num_delta_fratio) +{ + int fratio, delta_fratio, found; + int err, i; + u64 msr; + + err = rdmsrl_safe(MSR_PLATFORM_INFO, base_freq); + if (err) + return false; + + *base_freq = (*base_freq >> 8) & 0xFF; /* max P state */ + + err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT, &msr); + if (err) + return false; + + fratio = (msr >> 8) & 0xFF; + i = 16; + found = 0; + do { + if (found >= num_delta_fratio) { + *turbo_freq = fratio; + return true; + } + + delta_fratio = (msr >> (i + 5)) & 0x7; + + if (delta_fratio) { + found += 1; + fratio -= delta_fratio; + } + + i += 8; + } while (i < 64); + + return true; +} + +static bool __init skx_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq, int size) +{ + u64 ratios, counts; + u32 group_size; + int err, i; + + err = rdmsrl_safe(MSR_PLATFORM_INFO, base_freq); + if (err) + return false; + + *base_freq = (*base_freq >> 8) & 0xFF; /* max P state */ + + err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT, &ratios); + if (err) + return false; + + err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT1, &counts); + if (err) + return false; + + for (i = 0; i < 64; i += 8) { + group_size = (counts >> i) & 0xFF; + if (group_size >= size) { + *turbo_freq = (ratios >> i) & 0xFF; + return true; + } + } + + return false; +} + +static bool __init core_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq) +{ + u64 msr; + int err; + + err = rdmsrl_safe(MSR_PLATFORM_INFO, base_freq); + if (err) + return false; + + err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT, &msr); + if (err) + return false; + + *base_freq = (*base_freq >> 8) & 0xFF; /* max P state */ + *turbo_freq = (msr >> 24) & 0xFF; /* 4C turbo */ + + /* The CPU may have less than 4 cores */ + if (!*turbo_freq) + *turbo_freq = msr & 0xFF; /* 1C turbo */ + + return true; +} + +static bool __init intel_set_max_freq_ratio(void) +{ + u64 base_freq, turbo_freq; + u64 turbo_ratio; + + if (slv_set_max_freq_ratio(&base_freq, &turbo_freq)) + goto out; + + if (x86_match_cpu(has_glm_turbo_ratio_limits) && + skx_set_max_freq_ratio(&base_freq, &turbo_freq, 1)) + goto out; + + if (x86_match_cpu(has_knl_turbo_ratio_limits) && + knl_set_max_freq_ratio(&base_freq, &turbo_freq, 1)) + goto out; + + if (x86_match_cpu(has_skx_turbo_ratio_limits) && + skx_set_max_freq_ratio(&base_freq, &turbo_freq, 4)) + goto out; + + if (core_set_max_freq_ratio(&base_freq, &turbo_freq)) + goto out; + + return false; + +out: + /* + * Some hypervisors advertise X86_FEATURE_APERFMPERF + * but then fill all MSR's with zeroes. + * Some CPUs have turbo boost but don't declare any turbo ratio + * in MSR_TURBO_RATIO_LIMIT. + */ + if (!base_freq || !turbo_freq) { + pr_debug("Couldn't determine cpu base or turbo frequency, necessary for scale-invariant accounting.\n"); + return false; + } + + turbo_ratio = div_u64(turbo_freq * SCHED_CAPACITY_SCALE, base_freq); + if (!turbo_ratio) { + pr_debug("Non-zero turbo and base frequencies led to a 0 ratio.\n"); + return false; + } + + arch_turbo_freq_ratio = turbo_ratio; + arch_set_max_freq_ratio(turbo_disabled()); + + return true; +} + +#ifdef CONFIG_PM_SLEEP +static struct syscore_ops freq_invariance_syscore_ops = { + .resume = init_counter_refs, +}; + +static void register_freq_invariance_syscore_ops(void) +{ + register_syscore_ops(&freq_invariance_syscore_ops); +} +#else +static inline void register_freq_invariance_syscore_ops(void) {} +#endif + +static void freq_invariance_enable(void) +{ + if (static_branch_unlikely(&arch_scale_freq_key)) { + WARN_ON_ONCE(1); + return; + } + static_branch_enable(&arch_scale_freq_key); + register_freq_invariance_syscore_ops(); + pr_info("Estimated ratio of average max frequency by base frequency (times 1024): %llu\n", arch_max_freq_ratio); +} + +void freq_invariance_set_perf_ratio(u64 ratio, bool turbo_disabled) +{ + arch_turbo_freq_ratio = ratio; + arch_set_max_freq_ratio(turbo_disabled); + freq_invariance_enable(); +} + +static void __init bp_init_freq_invariance(void) +{ + if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) + return; + + if (intel_set_max_freq_ratio()) + freq_invariance_enable(); +} + +static void disable_freq_invariance_workfn(struct work_struct *work) +{ + int cpu; + + static_branch_disable(&arch_scale_freq_key); + + /* + * Set arch_freq_scale to a default value on all cpus + * This negates the effect of scaling + */ + for_each_possible_cpu(cpu) + per_cpu(arch_freq_scale, cpu) = SCHED_CAPACITY_SCALE; +} + +static DECLARE_WORK(disable_freq_invariance_work, + disable_freq_invariance_workfn); + +DEFINE_PER_CPU(unsigned long, arch_freq_scale) = SCHED_CAPACITY_SCALE; + +static void scale_freq_tick(u64 acnt, u64 mcnt) +{ + u64 freq_scale; + + if (!arch_scale_freq_invariant()) + return; + + if (check_shl_overflow(acnt, 2*SCHED_CAPACITY_SHIFT, &acnt)) + goto error; + + if (check_mul_overflow(mcnt, arch_max_freq_ratio, &mcnt) || !mcnt) + goto error; + + freq_scale = div64_u64(acnt, mcnt); + if (!freq_scale) + goto error; + + if (freq_scale > SCHED_CAPACITY_SCALE) + freq_scale = SCHED_CAPACITY_SCALE; + + this_cpu_write(arch_freq_scale, freq_scale); + return; + +error: + pr_warn("Scheduler frequency invariance went wobbly, disabling!\n"); + schedule_work(&disable_freq_invariance_work); +} +#else +static inline void bp_init_freq_invariance(void) { } +static inline void scale_freq_tick(u64 acnt, u64 mcnt) { } +#endif /* CONFIG_X86_64 && CONFIG_SMP */ + +void arch_scale_freq_tick(void) +{ + struct aperfmperf *s = this_cpu_ptr(&cpu_samples); + u64 acnt, mcnt, aperf, mperf; + + if (!cpu_feature_enabled(X86_FEATURE_APERFMPERF)) + return; + + rdmsrl(MSR_IA32_APERF, aperf); + rdmsrl(MSR_IA32_MPERF, mperf); + acnt = aperf - s->aperf; + mcnt = mperf - s->mperf; + + s->aperf = aperf; + s->mperf = mperf; + + raw_write_seqcount_begin(&s->seq); + s->last_update = jiffies; + s->acnt = acnt; + s->mcnt = mcnt; + raw_write_seqcount_end(&s->seq); + + scale_freq_tick(acnt, mcnt); +} + +/* + * Discard samples older than the define maximum sample age of 20ms. There + * is no point in sending IPIs in such a case. If the scheduler tick was + * not running then the CPU is either idle or isolated. + */ +#define MAX_SAMPLE_AGE ((unsigned long)HZ / 50) + +unsigned int arch_freq_get_on_cpu(int cpu) +{ + struct aperfmperf *s = per_cpu_ptr(&cpu_samples, cpu); + unsigned int seq, freq; + unsigned long last; + u64 acnt, mcnt; + + if (!cpu_feature_enabled(X86_FEATURE_APERFMPERF)) + goto fallback; + + do { + seq = raw_read_seqcount_begin(&s->seq); + last = s->last_update; + acnt = s->acnt; + mcnt = s->mcnt; + } while (read_seqcount_retry(&s->seq, seq)); + + /* + * Bail on invalid count and when the last update was too long ago, + * which covers idle and NOHZ full CPUs. + */ + if (!mcnt || (jiffies - last) > MAX_SAMPLE_AGE) + goto fallback; + + return div64_u64((cpu_khz * acnt), mcnt); + +fallback: + freq = cpufreq_quick_get(cpu); + return freq ? freq : cpu_khz; +} + +static int __init bp_init_aperfmperf(void) +{ + if (!cpu_feature_enabled(X86_FEATURE_APERFMPERF)) + return 0; + + init_counter_refs(); + bp_init_freq_invariance(); + return 0; +} +early_initcall(bp_init_aperfmperf); + +void ap_init_aperfmperf(void) +{ + if (cpu_feature_enabled(X86_FEATURE_APERFMPERF)) + init_counter_refs(); +} -- cgit v1.2.3