From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/kernel/kexec-bzimage64.c | 605 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 605 insertions(+) create mode 100644 arch/x86/kernel/kexec-bzimage64.c (limited to 'arch/x86/kernel/kexec-bzimage64.c') diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c new file mode 100644 index 000000000..6b58610a1 --- /dev/null +++ b/arch/x86/kernel/kexec-bzimage64.c @@ -0,0 +1,605 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Kexec bzImage loader + * + * Copyright (C) 2014 Red Hat Inc. + * Authors: + * Vivek Goyal + */ + +#define pr_fmt(fmt) "kexec-bzImage64: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define MAX_ELFCOREHDR_STR_LEN 30 /* elfcorehdr=0x<64bit-value> */ + +/* + * Defines lowest physical address for various segments. Not sure where + * exactly these limits came from. Current bzimage64 loader in kexec-tools + * uses these so I am retaining it. It can be changed over time as we gain + * more insight. + */ +#define MIN_PURGATORY_ADDR 0x3000 +#define MIN_BOOTPARAM_ADDR 0x3000 +#define MIN_KERNEL_LOAD_ADDR 0x100000 +#define MIN_INITRD_LOAD_ADDR 0x1000000 + +/* + * This is a place holder for all boot loader specific data structure which + * gets allocated in one call but gets freed much later during cleanup + * time. Right now there is only one field but it can grow as need be. + */ +struct bzimage64_data { + /* + * Temporary buffer to hold bootparams buffer. This should be + * freed once the bootparam segment has been loaded. + */ + void *bootparams_buf; +}; + +static int setup_initrd(struct boot_params *params, + unsigned long initrd_load_addr, unsigned long initrd_len) +{ + params->hdr.ramdisk_image = initrd_load_addr & 0xffffffffUL; + params->hdr.ramdisk_size = initrd_len & 0xffffffffUL; + + params->ext_ramdisk_image = initrd_load_addr >> 32; + params->ext_ramdisk_size = initrd_len >> 32; + + return 0; +} + +static int setup_cmdline(struct kimage *image, struct boot_params *params, + unsigned long bootparams_load_addr, + unsigned long cmdline_offset, char *cmdline, + unsigned long cmdline_len) +{ + char *cmdline_ptr = ((char *)params) + cmdline_offset; + unsigned long cmdline_ptr_phys, len = 0; + uint32_t cmdline_low_32, cmdline_ext_32; + + if (image->type == KEXEC_TYPE_CRASH) { + len = sprintf(cmdline_ptr, + "elfcorehdr=0x%lx ", image->elf_load_addr); + } + memcpy(cmdline_ptr + len, cmdline, cmdline_len); + cmdline_len += len; + + cmdline_ptr[cmdline_len - 1] = '\0'; + + pr_debug("Final command line is: %s\n", cmdline_ptr); + cmdline_ptr_phys = bootparams_load_addr + cmdline_offset; + cmdline_low_32 = cmdline_ptr_phys & 0xffffffffUL; + cmdline_ext_32 = cmdline_ptr_phys >> 32; + + params->hdr.cmd_line_ptr = cmdline_low_32; + if (cmdline_ext_32) + params->ext_cmd_line_ptr = cmdline_ext_32; + + return 0; +} + +static int setup_e820_entries(struct boot_params *params) +{ + unsigned int nr_e820_entries; + + nr_e820_entries = e820_table_kexec->nr_entries; + + /* TODO: Pass entries more than E820_MAX_ENTRIES_ZEROPAGE in bootparams setup data */ + if (nr_e820_entries > E820_MAX_ENTRIES_ZEROPAGE) + nr_e820_entries = E820_MAX_ENTRIES_ZEROPAGE; + + params->e820_entries = nr_e820_entries; + memcpy(¶ms->e820_table, &e820_table_kexec->entries, nr_e820_entries*sizeof(struct e820_entry)); + + return 0; +} + +enum { RNG_SEED_LENGTH = 32 }; + +static void +setup_rng_seed(struct boot_params *params, unsigned long params_load_addr, + unsigned int rng_seed_setup_data_offset) +{ + struct setup_data *sd = (void *)params + rng_seed_setup_data_offset; + unsigned long setup_data_phys; + + if (!rng_is_initialized()) + return; + + sd->type = SETUP_RNG_SEED; + sd->len = RNG_SEED_LENGTH; + get_random_bytes(sd->data, RNG_SEED_LENGTH); + setup_data_phys = params_load_addr + rng_seed_setup_data_offset; + sd->next = params->hdr.setup_data; + params->hdr.setup_data = setup_data_phys; +} + +#ifdef CONFIG_EFI +static int setup_efi_info_memmap(struct boot_params *params, + unsigned long params_load_addr, + unsigned int efi_map_offset, + unsigned int efi_map_sz) +{ + void *efi_map = (void *)params + efi_map_offset; + unsigned long efi_map_phys_addr = params_load_addr + efi_map_offset; + struct efi_info *ei = ¶ms->efi_info; + + if (!efi_map_sz) + return 0; + + efi_runtime_map_copy(efi_map, efi_map_sz); + + ei->efi_memmap = efi_map_phys_addr & 0xffffffff; + ei->efi_memmap_hi = efi_map_phys_addr >> 32; + ei->efi_memmap_size = efi_map_sz; + + return 0; +} + +static int +prepare_add_efi_setup_data(struct boot_params *params, + unsigned long params_load_addr, + unsigned int efi_setup_data_offset) +{ + unsigned long setup_data_phys; + struct setup_data *sd = (void *)params + efi_setup_data_offset; + struct efi_setup_data *esd = (void *)sd + sizeof(struct setup_data); + + esd->fw_vendor = efi_fw_vendor; + esd->tables = efi_config_table; + esd->smbios = efi.smbios; + + sd->type = SETUP_EFI; + sd->len = sizeof(struct efi_setup_data); + + /* Add setup data */ + setup_data_phys = params_load_addr + efi_setup_data_offset; + sd->next = params->hdr.setup_data; + params->hdr.setup_data = setup_data_phys; + + return 0; +} + +static int +setup_efi_state(struct boot_params *params, unsigned long params_load_addr, + unsigned int efi_map_offset, unsigned int efi_map_sz, + unsigned int efi_setup_data_offset) +{ + struct efi_info *current_ei = &boot_params.efi_info; + struct efi_info *ei = ¶ms->efi_info; + + if (!efi_enabled(EFI_RUNTIME_SERVICES)) + return 0; + + if (!current_ei->efi_memmap_size) + return 0; + + params->secure_boot = boot_params.secure_boot; + ei->efi_loader_signature = current_ei->efi_loader_signature; + ei->efi_systab = current_ei->efi_systab; + ei->efi_systab_hi = current_ei->efi_systab_hi; + + ei->efi_memdesc_version = current_ei->efi_memdesc_version; + ei->efi_memdesc_size = efi_get_runtime_map_desc_size(); + + setup_efi_info_memmap(params, params_load_addr, efi_map_offset, + efi_map_sz); + prepare_add_efi_setup_data(params, params_load_addr, + efi_setup_data_offset); + return 0; +} +#endif /* CONFIG_EFI */ + +static void +setup_ima_state(const struct kimage *image, struct boot_params *params, + unsigned long params_load_addr, + unsigned int ima_setup_data_offset) +{ +#ifdef CONFIG_IMA_KEXEC + struct setup_data *sd = (void *)params + ima_setup_data_offset; + unsigned long setup_data_phys; + struct ima_setup_data *ima; + + if (!image->ima_buffer_size) + return; + + sd->type = SETUP_IMA; + sd->len = sizeof(*ima); + + ima = (void *)sd + sizeof(struct setup_data); + ima->addr = image->ima_buffer_addr; + ima->size = image->ima_buffer_size; + + /* Add setup data */ + setup_data_phys = params_load_addr + ima_setup_data_offset; + sd->next = params->hdr.setup_data; + params->hdr.setup_data = setup_data_phys; +#endif /* CONFIG_IMA_KEXEC */ +} + +static int +setup_boot_parameters(struct kimage *image, struct boot_params *params, + unsigned long params_load_addr, + unsigned int efi_map_offset, unsigned int efi_map_sz, + unsigned int setup_data_offset) +{ + unsigned int nr_e820_entries; + unsigned long long mem_k, start, end; + int i, ret = 0; + + /* Get subarch from existing bootparams */ + params->hdr.hardware_subarch = boot_params.hdr.hardware_subarch; + + /* Copying screen_info will do? */ + memcpy(¶ms->screen_info, &screen_info, sizeof(struct screen_info)); + + /* Fill in memsize later */ + params->screen_info.ext_mem_k = 0; + params->alt_mem_k = 0; + + /* Always fill in RSDP: it is either 0 or a valid value */ + params->acpi_rsdp_addr = boot_params.acpi_rsdp_addr; + + /* Default APM info */ + memset(¶ms->apm_bios_info, 0, sizeof(params->apm_bios_info)); + + /* Default drive info */ + memset(¶ms->hd0_info, 0, sizeof(params->hd0_info)); + memset(¶ms->hd1_info, 0, sizeof(params->hd1_info)); + + if (image->type == KEXEC_TYPE_CRASH) { + ret = crash_setup_memmap_entries(image, params); + if (ret) + return ret; + } else + setup_e820_entries(params); + + nr_e820_entries = params->e820_entries; + + for (i = 0; i < nr_e820_entries; i++) { + if (params->e820_table[i].type != E820_TYPE_RAM) + continue; + start = params->e820_table[i].addr; + end = params->e820_table[i].addr + params->e820_table[i].size - 1; + + if ((start <= 0x100000) && end > 0x100000) { + mem_k = (end >> 10) - (0x100000 >> 10); + params->screen_info.ext_mem_k = mem_k; + params->alt_mem_k = mem_k; + if (mem_k > 0xfc00) + params->screen_info.ext_mem_k = 0xfc00; /* 64M*/ + if (mem_k > 0xffffffff) + params->alt_mem_k = 0xffffffff; + } + } + +#ifdef CONFIG_EFI + /* Setup EFI state */ + setup_efi_state(params, params_load_addr, efi_map_offset, efi_map_sz, + setup_data_offset); + setup_data_offset += sizeof(struct setup_data) + + sizeof(struct efi_setup_data); +#endif + + if (IS_ENABLED(CONFIG_IMA_KEXEC)) { + /* Setup IMA log buffer state */ + setup_ima_state(image, params, params_load_addr, + setup_data_offset); + setup_data_offset += sizeof(struct setup_data) + + sizeof(struct ima_setup_data); + } + + /* Setup RNG seed */ + setup_rng_seed(params, params_load_addr, setup_data_offset); + + /* Setup EDD info */ + memcpy(params->eddbuf, boot_params.eddbuf, + EDDMAXNR * sizeof(struct edd_info)); + params->eddbuf_entries = boot_params.eddbuf_entries; + + memcpy(params->edd_mbr_sig_buffer, boot_params.edd_mbr_sig_buffer, + EDD_MBR_SIG_MAX * sizeof(unsigned int)); + + return ret; +} + +static int bzImage64_probe(const char *buf, unsigned long len) +{ + int ret = -ENOEXEC; + struct setup_header *header; + + /* kernel should be at least two sectors long */ + if (len < 2 * 512) { + pr_err("File is too short to be a bzImage\n"); + return ret; + } + + header = (struct setup_header *)(buf + offsetof(struct boot_params, hdr)); + if (memcmp((char *)&header->header, "HdrS", 4) != 0) { + pr_err("Not a bzImage\n"); + return ret; + } + + if (header->boot_flag != 0xAA55) { + pr_err("No x86 boot sector present\n"); + return ret; + } + + if (header->version < 0x020C) { + pr_err("Must be at least protocol version 2.12\n"); + return ret; + } + + if (!(header->loadflags & LOADED_HIGH)) { + pr_err("zImage not a bzImage\n"); + return ret; + } + + if (!(header->xloadflags & XLF_KERNEL_64)) { + pr_err("Not a bzImage64. XLF_KERNEL_64 is not set.\n"); + return ret; + } + + if (!(header->xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G)) { + pr_err("XLF_CAN_BE_LOADED_ABOVE_4G is not set.\n"); + return ret; + } + + /* + * Can't handle 32bit EFI as it does not allow loading kernel + * above 4G. This should be handled by 32bit bzImage loader + */ + if (efi_enabled(EFI_RUNTIME_SERVICES) && !efi_enabled(EFI_64BIT)) { + pr_debug("EFI is 32 bit. Can't load kernel above 4G.\n"); + return ret; + } + + if (!(header->xloadflags & XLF_5LEVEL) && pgtable_l5_enabled()) { + pr_err("bzImage cannot handle 5-level paging mode.\n"); + return ret; + } + + /* I've got a bzImage */ + pr_debug("It's a relocatable bzImage64\n"); + ret = 0; + + return ret; +} + +static void *bzImage64_load(struct kimage *image, char *kernel, + unsigned long kernel_len, char *initrd, + unsigned long initrd_len, char *cmdline, + unsigned long cmdline_len) +{ + + struct setup_header *header; + int setup_sects, kern16_size, ret = 0; + unsigned long setup_header_size, params_cmdline_sz; + struct boot_params *params; + unsigned long bootparam_load_addr, kernel_load_addr, initrd_load_addr; + struct bzimage64_data *ldata; + struct kexec_entry64_regs regs64; + void *stack; + unsigned int setup_hdr_offset = offsetof(struct boot_params, hdr); + unsigned int efi_map_offset, efi_map_sz, efi_setup_data_offset; + struct kexec_buf kbuf = { .image = image, .buf_max = ULONG_MAX, + .top_down = true }; + struct kexec_buf pbuf = { .image = image, .buf_min = MIN_PURGATORY_ADDR, + .buf_max = ULONG_MAX, .top_down = true }; + + header = (struct setup_header *)(kernel + setup_hdr_offset); + setup_sects = header->setup_sects; + if (setup_sects == 0) + setup_sects = 4; + + kern16_size = (setup_sects + 1) * 512; + if (kernel_len < kern16_size) { + pr_err("bzImage truncated\n"); + return ERR_PTR(-ENOEXEC); + } + + if (cmdline_len > header->cmdline_size) { + pr_err("Kernel command line too long\n"); + return ERR_PTR(-EINVAL); + } + + /* + * In case of crash dump, we will append elfcorehdr= to + * command line. Make sure it does not overflow + */ + if (cmdline_len + MAX_ELFCOREHDR_STR_LEN > header->cmdline_size) { + pr_debug("Appending elfcorehdr= to command line exceeds maximum allowed length\n"); + return ERR_PTR(-EINVAL); + } + + /* Allocate and load backup region */ + if (image->type == KEXEC_TYPE_CRASH) { + ret = crash_load_segments(image); + if (ret) + return ERR_PTR(ret); + } + + /* + * Load purgatory. For 64bit entry point, purgatory code can be + * anywhere. + */ + ret = kexec_load_purgatory(image, &pbuf); + if (ret) { + pr_err("Loading purgatory failed\n"); + return ERR_PTR(ret); + } + + pr_debug("Loaded purgatory at 0x%lx\n", pbuf.mem); + + + /* + * Load Bootparams and cmdline and space for efi stuff. + * + * Allocate memory together for multiple data structures so + * that they all can go in single area/segment and we don't + * have to create separate segment for each. Keeps things + * little bit simple + */ + efi_map_sz = efi_get_runtime_map_size(); + params_cmdline_sz = sizeof(struct boot_params) + cmdline_len + + MAX_ELFCOREHDR_STR_LEN; + params_cmdline_sz = ALIGN(params_cmdline_sz, 16); + kbuf.bufsz = params_cmdline_sz + ALIGN(efi_map_sz, 16) + + sizeof(struct setup_data) + + sizeof(struct efi_setup_data) + + sizeof(struct setup_data) + + RNG_SEED_LENGTH; + + if (IS_ENABLED(CONFIG_IMA_KEXEC)) + kbuf.bufsz += sizeof(struct setup_data) + + sizeof(struct ima_setup_data); + + params = kzalloc(kbuf.bufsz, GFP_KERNEL); + if (!params) + return ERR_PTR(-ENOMEM); + efi_map_offset = params_cmdline_sz; + efi_setup_data_offset = efi_map_offset + ALIGN(efi_map_sz, 16); + + /* Copy setup header onto bootparams. Documentation/x86/boot.rst */ + setup_header_size = 0x0202 + kernel[0x0201] - setup_hdr_offset; + + /* Is there a limit on setup header size? */ + memcpy(¶ms->hdr, (kernel + setup_hdr_offset), setup_header_size); + + kbuf.buffer = params; + kbuf.memsz = kbuf.bufsz; + kbuf.buf_align = 16; + kbuf.buf_min = MIN_BOOTPARAM_ADDR; + ret = kexec_add_buffer(&kbuf); + if (ret) + goto out_free_params; + bootparam_load_addr = kbuf.mem; + pr_debug("Loaded boot_param, command line and misc at 0x%lx bufsz=0x%lx memsz=0x%lx\n", + bootparam_load_addr, kbuf.bufsz, kbuf.bufsz); + + /* Load kernel */ + kbuf.buffer = kernel + kern16_size; + kbuf.bufsz = kernel_len - kern16_size; + kbuf.memsz = PAGE_ALIGN(header->init_size); + kbuf.buf_align = header->kernel_alignment; + kbuf.buf_min = MIN_KERNEL_LOAD_ADDR; + kbuf.mem = KEXEC_BUF_MEM_UNKNOWN; + ret = kexec_add_buffer(&kbuf); + if (ret) + goto out_free_params; + kernel_load_addr = kbuf.mem; + + pr_debug("Loaded 64bit kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n", + kernel_load_addr, kbuf.bufsz, kbuf.memsz); + + /* Load initrd high */ + if (initrd) { + kbuf.buffer = initrd; + kbuf.bufsz = kbuf.memsz = initrd_len; + kbuf.buf_align = PAGE_SIZE; + kbuf.buf_min = MIN_INITRD_LOAD_ADDR; + kbuf.mem = KEXEC_BUF_MEM_UNKNOWN; + ret = kexec_add_buffer(&kbuf); + if (ret) + goto out_free_params; + initrd_load_addr = kbuf.mem; + + pr_debug("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n", + initrd_load_addr, initrd_len, initrd_len); + + setup_initrd(params, initrd_load_addr, initrd_len); + } + + setup_cmdline(image, params, bootparam_load_addr, + sizeof(struct boot_params), cmdline, cmdline_len); + + /* bootloader info. Do we need a separate ID for kexec kernel loader? */ + params->hdr.type_of_loader = 0x0D << 4; + params->hdr.loadflags = 0; + + /* Setup purgatory regs for entry */ + ret = kexec_purgatory_get_set_symbol(image, "entry64_regs", ®s64, + sizeof(regs64), 1); + if (ret) + goto out_free_params; + + regs64.rbx = 0; /* Bootstrap Processor */ + regs64.rsi = bootparam_load_addr; + regs64.rip = kernel_load_addr + 0x200; + stack = kexec_purgatory_get_symbol_addr(image, "stack_end"); + if (IS_ERR(stack)) { + pr_err("Could not find address of symbol stack_end\n"); + ret = -EINVAL; + goto out_free_params; + } + + regs64.rsp = (unsigned long)stack; + ret = kexec_purgatory_get_set_symbol(image, "entry64_regs", ®s64, + sizeof(regs64), 0); + if (ret) + goto out_free_params; + + ret = setup_boot_parameters(image, params, bootparam_load_addr, + efi_map_offset, efi_map_sz, + efi_setup_data_offset); + if (ret) + goto out_free_params; + + /* Allocate loader specific data */ + ldata = kzalloc(sizeof(struct bzimage64_data), GFP_KERNEL); + if (!ldata) { + ret = -ENOMEM; + goto out_free_params; + } + + /* + * Store pointer to params so that it could be freed after loading + * params segment has been loaded and contents have been copied + * somewhere else. + */ + ldata->bootparams_buf = params; + return ldata; + +out_free_params: + kfree(params); + return ERR_PTR(ret); +} + +/* This cleanup function is called after various segments have been loaded */ +static int bzImage64_cleanup(void *loader_data) +{ + struct bzimage64_data *ldata = loader_data; + + if (!ldata) + return 0; + + kfree(ldata->bootparams_buf); + ldata->bootparams_buf = NULL; + + return 0; +} + +const struct kexec_file_ops kexec_bzImage64_ops = { + .probe = bzImage64_probe, + .load = bzImage64_load, + .cleanup = bzImage64_cleanup, +#ifdef CONFIG_KEXEC_BZIMAGE_VERIFY_SIG + .verify_sig = kexec_kernel_verify_pe_sig, +#endif +}; -- cgit v1.2.3