From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/kernel/vmlinux.lds.S | 511 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 511 insertions(+) create mode 100644 arch/x86/kernel/vmlinux.lds.S (limited to 'arch/x86/kernel/vmlinux.lds.S') diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S new file mode 100644 index 000000000..25f155205 --- /dev/null +++ b/arch/x86/kernel/vmlinux.lds.S @@ -0,0 +1,511 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ld script for the x86 kernel + * + * Historic 32-bit version written by Martin Mares + * + * Modernisation, unification and other changes and fixes: + * Copyright (C) 2007-2009 Sam Ravnborg + * + * + * Don't define absolute symbols until and unless you know that symbol + * value is should remain constant even if kernel image is relocated + * at run time. Absolute symbols are not relocated. If symbol value should + * change if kernel is relocated, make the symbol section relative and + * put it inside the section definition. + */ + +#ifdef CONFIG_X86_32 +#define LOAD_OFFSET __PAGE_OFFSET +#else +#define LOAD_OFFSET __START_KERNEL_map +#endif + +#define RUNTIME_DISCARD_EXIT +#define EMITS_PT_NOTE +#define RO_EXCEPTION_TABLE_ALIGN 16 + +#include +#include +#include +#include +#include +#include +#include + +#undef i386 /* in case the preprocessor is a 32bit one */ + +OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT) + +#ifdef CONFIG_X86_32 +OUTPUT_ARCH(i386) +ENTRY(phys_startup_32) +#else +OUTPUT_ARCH(i386:x86-64) +ENTRY(phys_startup_64) +#endif + +jiffies = jiffies_64; + +#if defined(CONFIG_X86_64) +/* + * On 64-bit, align RODATA to 2MB so we retain large page mappings for + * boundaries spanning kernel text, rodata and data sections. + * + * However, kernel identity mappings will have different RWX permissions + * to the pages mapping to text and to the pages padding (which are freed) the + * text section. Hence kernel identity mappings will be broken to smaller + * pages. For 64-bit, kernel text and kernel identity mappings are different, + * so we can enable protection checks as well as retain 2MB large page + * mappings for kernel text. + */ +#define X86_ALIGN_RODATA_BEGIN . = ALIGN(HPAGE_SIZE); + +#define X86_ALIGN_RODATA_END \ + . = ALIGN(HPAGE_SIZE); \ + __end_rodata_hpage_align = .; \ + __end_rodata_aligned = .; + +#define ALIGN_ENTRY_TEXT_BEGIN . = ALIGN(PMD_SIZE); +#define ALIGN_ENTRY_TEXT_END . = ALIGN(PMD_SIZE); + +/* + * This section contains data which will be mapped as decrypted. Memory + * encryption operates on a page basis. Make this section PMD-aligned + * to avoid splitting the pages while mapping the section early. + * + * Note: We use a separate section so that only this section gets + * decrypted to avoid exposing more than we wish. + */ +#define BSS_DECRYPTED \ + . = ALIGN(PMD_SIZE); \ + __start_bss_decrypted = .; \ + *(.bss..decrypted); \ + . = ALIGN(PAGE_SIZE); \ + __start_bss_decrypted_unused = .; \ + . = ALIGN(PMD_SIZE); \ + __end_bss_decrypted = .; \ + +#else + +#define X86_ALIGN_RODATA_BEGIN +#define X86_ALIGN_RODATA_END \ + . = ALIGN(PAGE_SIZE); \ + __end_rodata_aligned = .; + +#define ALIGN_ENTRY_TEXT_BEGIN +#define ALIGN_ENTRY_TEXT_END +#define BSS_DECRYPTED + +#endif + +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + data PT_LOAD FLAGS(6); /* RW_ */ +#ifdef CONFIG_X86_64 +#ifdef CONFIG_SMP + percpu PT_LOAD FLAGS(6); /* RW_ */ +#endif + init PT_LOAD FLAGS(7); /* RWE */ +#endif + note PT_NOTE FLAGS(0); /* ___ */ +} + +SECTIONS +{ +#ifdef CONFIG_X86_32 + . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; + phys_startup_32 = ABSOLUTE(startup_32 - LOAD_OFFSET); +#else + . = __START_KERNEL; + phys_startup_64 = ABSOLUTE(startup_64 - LOAD_OFFSET); +#endif + + /* Text and read-only data */ + .text : AT(ADDR(.text) - LOAD_OFFSET) { + _text = .; + _stext = .; + /* bootstrapping code */ + HEAD_TEXT + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + SOFTIRQENTRY_TEXT +#ifdef CONFIG_RETPOLINE + __indirect_thunk_start = .; + *(.text.__x86.*) + __indirect_thunk_end = .; +#endif + STATIC_CALL_TEXT + + ALIGN_ENTRY_TEXT_BEGIN + ENTRY_TEXT + ALIGN_ENTRY_TEXT_END + *(.gnu.warning) + + } :text =0xcccc + + /* End of text section, which should occupy whole number of pages */ + _etext = .; + . = ALIGN(PAGE_SIZE); + + X86_ALIGN_RODATA_BEGIN + RO_DATA(PAGE_SIZE) + X86_ALIGN_RODATA_END + + /* Data */ + .data : AT(ADDR(.data) - LOAD_OFFSET) { + /* Start of data section */ + _sdata = .; + + /* init_task */ + INIT_TASK_DATA(THREAD_SIZE) + +#ifdef CONFIG_X86_32 + /* 32 bit has nosave before _edata */ + NOSAVE_DATA +#endif + + PAGE_ALIGNED_DATA(PAGE_SIZE) + + CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) + + DATA_DATA + CONSTRUCTORS + + /* rarely changed data like cpu maps */ + READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES) + + /* End of data section */ + _edata = .; + } :data + + BUG_TABLE + + ORC_UNWIND_TABLE + + . = ALIGN(PAGE_SIZE); + __vvar_page = .; + + .vvar : AT(ADDR(.vvar) - LOAD_OFFSET) { + /* work around gold bug 13023 */ + __vvar_beginning_hack = .; + + /* Place all vvars at the offsets in asm/vvar.h. */ +#define EMIT_VVAR(name, offset) \ + . = __vvar_beginning_hack + offset; \ + *(.vvar_ ## name) +#include +#undef EMIT_VVAR + + /* + * Pad the rest of the page with zeros. Otherwise the loader + * can leave garbage here. + */ + . = __vvar_beginning_hack + PAGE_SIZE; + } :data + + . = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE); + + /* Init code and data - will be freed after init */ + . = ALIGN(PAGE_SIZE); + .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) { + __init_begin = .; /* paired with __init_end */ + } + +#if defined(CONFIG_X86_64) && defined(CONFIG_SMP) + /* + * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the + * output PHDR, so the next output section - .init.text - should + * start another segment - init. + */ + PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu) + ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START, + "per-CPU data too large - increase CONFIG_PHYSICAL_START") +#endif + + INIT_TEXT_SECTION(PAGE_SIZE) +#ifdef CONFIG_X86_64 + :init +#endif + + /* + * Section for code used exclusively before alternatives are run. All + * references to such code must be patched out by alternatives, normally + * by using X86_FEATURE_ALWAYS CPU feature bit. + * + * See static_cpu_has() for an example. + */ + .altinstr_aux : AT(ADDR(.altinstr_aux) - LOAD_OFFSET) { + *(.altinstr_aux) + } + + INIT_DATA_SECTION(16) + + .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { + __x86_cpu_dev_start = .; + *(.x86_cpu_dev.init) + __x86_cpu_dev_end = .; + } + +#ifdef CONFIG_X86_INTEL_MID + .x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \ + LOAD_OFFSET) { + __x86_intel_mid_dev_start = .; + *(.x86_intel_mid_dev.init) + __x86_intel_mid_dev_end = .; + } +#endif + + /* + * start address and size of operations which during runtime + * can be patched with virtualization friendly instructions or + * baremetal native ones. Think page table operations. + * Details in paravirt_types.h + */ + . = ALIGN(8); + .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { + __parainstructions = .; + *(.parainstructions) + __parainstructions_end = .; + } + +#ifdef CONFIG_RETPOLINE + /* + * List of instructions that call/jmp/jcc to retpoline thunks + * __x86_indirect_thunk_*(). These instructions can be patched along + * with alternatives, after which the section can be freed. + */ + . = ALIGN(8); + .retpoline_sites : AT(ADDR(.retpoline_sites) - LOAD_OFFSET) { + __retpoline_sites = .; + *(.retpoline_sites) + __retpoline_sites_end = .; + } + + . = ALIGN(8); + .return_sites : AT(ADDR(.return_sites) - LOAD_OFFSET) { + __return_sites = .; + *(.return_sites) + __return_sites_end = .; + } + + . = ALIGN(8); + .call_sites : AT(ADDR(.call_sites) - LOAD_OFFSET) { + __call_sites = .; + *(.call_sites) + __call_sites_end = .; + } +#endif + +#ifdef CONFIG_X86_KERNEL_IBT + . = ALIGN(8); + .ibt_endbr_seal : AT(ADDR(.ibt_endbr_seal) - LOAD_OFFSET) { + __ibt_endbr_seal = .; + *(.ibt_endbr_seal) + __ibt_endbr_seal_end = .; + } +#endif + +#ifdef CONFIG_FINEIBT + . = ALIGN(8); + .cfi_sites : AT(ADDR(.cfi_sites) - LOAD_OFFSET) { + __cfi_sites = .; + *(.cfi_sites) + __cfi_sites_end = .; + } +#endif + + /* + * struct alt_inst entries. From the header (alternative.h): + * "Alternative instructions for different CPU types or capabilities" + * Think locking instructions on spinlocks. + */ + . = ALIGN(8); + .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { + __alt_instructions = .; + *(.altinstructions) + __alt_instructions_end = .; + } + + /* + * And here are the replacement instructions. The linker sticks + * them as binary blobs. The .altinstructions has enough data to + * get the address and the length of them to patch the kernel safely. + */ + .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { + *(.altinstr_replacement) + } + + . = ALIGN(8); + .apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) { + __apicdrivers = .; + *(.apicdrivers); + __apicdrivers_end = .; + } + + . = ALIGN(8); + /* + * .exit.text is discarded at runtime, not link time, to deal with + * references from .altinstructions + */ + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { + EXIT_TEXT + } + + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { + EXIT_DATA + } + +#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP) + PERCPU_SECTION(INTERNODE_CACHE_BYTES) +#endif + + . = ALIGN(PAGE_SIZE); + + /* freed after init ends here */ + .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) { + __init_end = .; + } + + /* + * smp_locks might be freed after init + * start/end must be page aligned + */ + . = ALIGN(PAGE_SIZE); + .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { + __smp_locks = .; + *(.smp_locks) + . = ALIGN(PAGE_SIZE); + __smp_locks_end = .; + } + +#ifdef CONFIG_X86_64 + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { + NOSAVE_DATA + } +#endif + + /* BSS */ + . = ALIGN(PAGE_SIZE); + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { + __bss_start = .; + *(.bss..page_aligned) + . = ALIGN(PAGE_SIZE); + *(BSS_MAIN) + BSS_DECRYPTED + . = ALIGN(PAGE_SIZE); + __bss_stop = .; + } + + /* + * The memory occupied from _text to here, __end_of_kernel_reserve, is + * automatically reserved in setup_arch(). Anything after here must be + * explicitly reserved using memblock_reserve() or it will be discarded + * and treated as available memory. + */ + __end_of_kernel_reserve = .; + + . = ALIGN(PAGE_SIZE); + .brk : AT(ADDR(.brk) - LOAD_OFFSET) { + __brk_base = .; + . += 64 * 1024; /* 64k alignment slop space */ + *(.bss..brk) /* areas brk users have reserved */ + __brk_limit = .; + } + + . = ALIGN(PAGE_SIZE); /* keep VO_INIT_SIZE page aligned */ + _end = .; + +#ifdef CONFIG_AMD_MEM_ENCRYPT + /* + * Early scratch/workarea section: Lives outside of the kernel proper + * (_text - _end). + * + * Resides after _end because even though the .brk section is after + * __end_of_kernel_reserve, the .brk section is later reserved as a + * part of the kernel. Since it is located after __end_of_kernel_reserve + * it will be discarded and become part of the available memory. As + * such, it can only be used by very early boot code and must not be + * needed afterwards. + * + * Currently used by SME for performing in-place encryption of the + * kernel during boot. Resides on a 2MB boundary to simplify the + * pagetable setup used for SME in-place encryption. + */ + . = ALIGN(HPAGE_SIZE); + .init.scratch : AT(ADDR(.init.scratch) - LOAD_OFFSET) { + __init_scratch_begin = .; + *(.init.scratch) + . = ALIGN(HPAGE_SIZE); + __init_scratch_end = .; + } +#endif + + STABS_DEBUG + DWARF_DEBUG + ELF_DETAILS + + DISCARDS + + /* + * Make sure that the .got.plt is either completely empty or it + * contains only the lazy dispatch entries. + */ + .got.plt (INFO) : { *(.got.plt) } + ASSERT(SIZEOF(.got.plt) == 0 || +#ifdef CONFIG_X86_64 + SIZEOF(.got.plt) == 0x18, +#else + SIZEOF(.got.plt) == 0xc, +#endif + "Unexpected GOT/PLT entries detected!") + + /* + * Sections that should stay zero sized, which is safer to + * explicitly check instead of blindly discarding. + */ + .got : { + *(.got) *(.igot.*) + } + ASSERT(SIZEOF(.got) == 0, "Unexpected GOT entries detected!") + + .plt : { + *(.plt) *(.plt.*) *(.iplt) + } + ASSERT(SIZEOF(.plt) == 0, "Unexpected run-time procedure linkages detected!") + + .rel.dyn : { + *(.rel.*) *(.rel_*) + } + ASSERT(SIZEOF(.rel.dyn) == 0, "Unexpected run-time relocations (.rel) detected!") + + .rela.dyn : { + *(.rela.*) *(.rela_*) + } + ASSERT(SIZEOF(.rela.dyn) == 0, "Unexpected run-time relocations (.rela) detected!") +} + +/* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ +. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), + "kernel image bigger than KERNEL_IMAGE_SIZE"); + +#ifdef CONFIG_X86_64 +/* + * Per-cpu symbols which need to be offset from __per_cpu_load + * for the boot processor. + */ +#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load +INIT_PER_CPU(gdt_page); +INIT_PER_CPU(fixed_percpu_data); +INIT_PER_CPU(irq_stack_backing_store); + +#ifdef CONFIG_SMP +. = ASSERT((fixed_percpu_data == 0), + "fixed_percpu_data is not at start of per-cpu area"); +#endif + +#endif /* CONFIG_X86_64 */ -- cgit v1.2.3