From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/lib/memcpy_64.S | 186 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 186 insertions(+) create mode 100644 arch/x86/lib/memcpy_64.S (limited to 'arch/x86/lib/memcpy_64.S') diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S new file mode 100644 index 000000000..a64017602 --- /dev/null +++ b/arch/x86/lib/memcpy_64.S @@ -0,0 +1,186 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright 2002 Andi Kleen */ + +#include +#include +#include +#include +#include +#include + +.section .noinstr.text, "ax" + +/* + * We build a jump to memcpy_orig by default which gets NOPped out on + * the majority of x86 CPUs which set REP_GOOD. In addition, CPUs which + * have the enhanced REP MOVSB/STOSB feature (ERMS), change those NOPs + * to a jmp to memcpy_erms which does the REP; MOVSB mem copy. + */ + +/* + * memcpy - Copy a memory block. + * + * Input: + * rdi destination + * rsi source + * rdx count + * + * Output: + * rax original destination + */ +SYM_TYPED_FUNC_START(__memcpy) + ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \ + "jmp memcpy_erms", X86_FEATURE_ERMS + + movq %rdi, %rax + movq %rdx, %rcx + shrq $3, %rcx + andl $7, %edx + rep movsq + movl %edx, %ecx + rep movsb + RET +SYM_FUNC_END(__memcpy) +EXPORT_SYMBOL(__memcpy) + +SYM_FUNC_ALIAS(memcpy, __memcpy) +EXPORT_SYMBOL(memcpy) + +/* + * memcpy_erms() - enhanced fast string memcpy. This is faster and + * simpler than memcpy. Use memcpy_erms when possible. + */ +SYM_FUNC_START_LOCAL(memcpy_erms) + movq %rdi, %rax + movq %rdx, %rcx + rep movsb + RET +SYM_FUNC_END(memcpy_erms) + +SYM_FUNC_START_LOCAL(memcpy_orig) + movq %rdi, %rax + + cmpq $0x20, %rdx + jb .Lhandle_tail + + /* + * We check whether memory false dependence could occur, + * then jump to corresponding copy mode. + */ + cmp %dil, %sil + jl .Lcopy_backward + subq $0x20, %rdx +.Lcopy_forward_loop: + subq $0x20, %rdx + + /* + * Move in blocks of 4x8 bytes: + */ + movq 0*8(%rsi), %r8 + movq 1*8(%rsi), %r9 + movq 2*8(%rsi), %r10 + movq 3*8(%rsi), %r11 + leaq 4*8(%rsi), %rsi + + movq %r8, 0*8(%rdi) + movq %r9, 1*8(%rdi) + movq %r10, 2*8(%rdi) + movq %r11, 3*8(%rdi) + leaq 4*8(%rdi), %rdi + jae .Lcopy_forward_loop + addl $0x20, %edx + jmp .Lhandle_tail + +.Lcopy_backward: + /* + * Calculate copy position to tail. + */ + addq %rdx, %rsi + addq %rdx, %rdi + subq $0x20, %rdx + /* + * At most 3 ALU operations in one cycle, + * so append NOPS in the same 16 bytes trunk. + */ + .p2align 4 +.Lcopy_backward_loop: + subq $0x20, %rdx + movq -1*8(%rsi), %r8 + movq -2*8(%rsi), %r9 + movq -3*8(%rsi), %r10 + movq -4*8(%rsi), %r11 + leaq -4*8(%rsi), %rsi + movq %r8, -1*8(%rdi) + movq %r9, -2*8(%rdi) + movq %r10, -3*8(%rdi) + movq %r11, -4*8(%rdi) + leaq -4*8(%rdi), %rdi + jae .Lcopy_backward_loop + + /* + * Calculate copy position to head. + */ + addl $0x20, %edx + subq %rdx, %rsi + subq %rdx, %rdi +.Lhandle_tail: + cmpl $16, %edx + jb .Lless_16bytes + + /* + * Move data from 16 bytes to 31 bytes. + */ + movq 0*8(%rsi), %r8 + movq 1*8(%rsi), %r9 + movq -2*8(%rsi, %rdx), %r10 + movq -1*8(%rsi, %rdx), %r11 + movq %r8, 0*8(%rdi) + movq %r9, 1*8(%rdi) + movq %r10, -2*8(%rdi, %rdx) + movq %r11, -1*8(%rdi, %rdx) + RET + .p2align 4 +.Lless_16bytes: + cmpl $8, %edx + jb .Lless_8bytes + /* + * Move data from 8 bytes to 15 bytes. + */ + movq 0*8(%rsi), %r8 + movq -1*8(%rsi, %rdx), %r9 + movq %r8, 0*8(%rdi) + movq %r9, -1*8(%rdi, %rdx) + RET + .p2align 4 +.Lless_8bytes: + cmpl $4, %edx + jb .Lless_3bytes + + /* + * Move data from 4 bytes to 7 bytes. + */ + movl (%rsi), %ecx + movl -4(%rsi, %rdx), %r8d + movl %ecx, (%rdi) + movl %r8d, -4(%rdi, %rdx) + RET + .p2align 4 +.Lless_3bytes: + subl $1, %edx + jb .Lend + /* + * Move data from 1 bytes to 3 bytes. + */ + movzbl (%rsi), %ecx + jz .Lstore_1byte + movzbq 1(%rsi), %r8 + movzbq (%rsi, %rdx), %r9 + movb %r8b, 1(%rdi) + movb %r9b, (%rdi, %rdx) +.Lstore_1byte: + movb %cl, (%rdi) + +.Lend: + RET +SYM_FUNC_END(memcpy_orig) + -- cgit v1.2.3