From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/mm/kaslr.c | 181 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 181 insertions(+) create mode 100644 arch/x86/mm/kaslr.c (limited to 'arch/x86/mm/kaslr.c') diff --git a/arch/x86/mm/kaslr.c b/arch/x86/mm/kaslr.c new file mode 100644 index 000000000..557f0fe25 --- /dev/null +++ b/arch/x86/mm/kaslr.c @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This file implements KASLR memory randomization for x86_64. It randomizes + * the virtual address space of kernel memory regions (physical memory + * mapping, vmalloc & vmemmap) for x86_64. This security feature mitigates + * exploits relying on predictable kernel addresses. + * + * Entropy is generated using the KASLR early boot functions now shared in + * the lib directory (originally written by Kees Cook). Randomization is + * done on PGD & P4D/PUD page table levels to increase possible addresses. + * The physical memory mapping code was adapted to support P4D/PUD level + * virtual addresses. This implementation on the best configuration provides + * 30,000 possible virtual addresses in average for each memory region. + * An additional low memory page is used to ensure each CPU can start with + * a PGD aligned virtual address (for realmode). + * + * The order of each memory region is not changed. The feature looks at + * the available space for the regions based on different configuration + * options and randomizes the base and space between each. The size of the + * physical memory mapping is the available physical memory. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include "mm_internal.h" + +#define TB_SHIFT 40 + +/* + * The end address could depend on more configuration options to make the + * highest amount of space for randomization available, but that's too hard + * to keep straight and caused issues already. + */ +static const unsigned long vaddr_end = CPU_ENTRY_AREA_BASE; + +/* + * Memory regions randomized by KASLR (except modules that use a separate logic + * earlier during boot). The list is ordered based on virtual addresses. This + * order is kept after randomization. + */ +static __initdata struct kaslr_memory_region { + unsigned long *base; + unsigned long size_tb; +} kaslr_regions[] = { + { &page_offset_base, 0 }, + { &vmalloc_base, 0 }, + { &vmemmap_base, 0 }, +}; + +/* Get size in bytes used by the memory region */ +static inline unsigned long get_padding(struct kaslr_memory_region *region) +{ + return (region->size_tb << TB_SHIFT); +} + +/* Initialize base and padding for each memory region randomized with KASLR */ +void __init kernel_randomize_memory(void) +{ + size_t i; + unsigned long vaddr_start, vaddr; + unsigned long rand, memory_tb; + struct rnd_state rand_state; + unsigned long remain_entropy; + unsigned long vmemmap_size; + + vaddr_start = pgtable_l5_enabled() ? __PAGE_OFFSET_BASE_L5 : __PAGE_OFFSET_BASE_L4; + vaddr = vaddr_start; + + /* + * These BUILD_BUG_ON checks ensure the memory layout is consistent + * with the vaddr_start/vaddr_end variables. These checks are very + * limited.... + */ + BUILD_BUG_ON(vaddr_start >= vaddr_end); + BUILD_BUG_ON(vaddr_end != CPU_ENTRY_AREA_BASE); + BUILD_BUG_ON(vaddr_end > __START_KERNEL_map); + + if (!kaslr_memory_enabled()) + return; + + kaslr_regions[0].size_tb = 1 << (MAX_PHYSMEM_BITS - TB_SHIFT); + kaslr_regions[1].size_tb = VMALLOC_SIZE_TB; + + /* + * Update Physical memory mapping to available and + * add padding if needed (especially for memory hotplug support). + */ + BUG_ON(kaslr_regions[0].base != &page_offset_base); + memory_tb = DIV_ROUND_UP(max_pfn << PAGE_SHIFT, 1UL << TB_SHIFT) + + CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING; + + /* Adapt physical memory region size based on available memory */ + if (memory_tb < kaslr_regions[0].size_tb) + kaslr_regions[0].size_tb = memory_tb; + + /* + * Calculate the vmemmap region size in TBs, aligned to a TB + * boundary. + */ + vmemmap_size = (kaslr_regions[0].size_tb << (TB_SHIFT - PAGE_SHIFT)) * + sizeof(struct page); + kaslr_regions[2].size_tb = DIV_ROUND_UP(vmemmap_size, 1UL << TB_SHIFT); + + /* Calculate entropy available between regions */ + remain_entropy = vaddr_end - vaddr_start; + for (i = 0; i < ARRAY_SIZE(kaslr_regions); i++) + remain_entropy -= get_padding(&kaslr_regions[i]); + + prandom_seed_state(&rand_state, kaslr_get_random_long("Memory")); + + for (i = 0; i < ARRAY_SIZE(kaslr_regions); i++) { + unsigned long entropy; + + /* + * Select a random virtual address using the extra entropy + * available. + */ + entropy = remain_entropy / (ARRAY_SIZE(kaslr_regions) - i); + prandom_bytes_state(&rand_state, &rand, sizeof(rand)); + entropy = (rand % (entropy + 1)) & PUD_MASK; + vaddr += entropy; + *kaslr_regions[i].base = vaddr; + + /* + * Jump the region and add a minimum padding based on + * randomization alignment. + */ + vaddr += get_padding(&kaslr_regions[i]); + vaddr = round_up(vaddr + 1, PUD_SIZE); + remain_entropy -= entropy; + } +} + +void __meminit init_trampoline_kaslr(void) +{ + pud_t *pud_page_tramp, *pud, *pud_tramp; + p4d_t *p4d_page_tramp, *p4d, *p4d_tramp; + unsigned long paddr, vaddr; + pgd_t *pgd; + + pud_page_tramp = alloc_low_page(); + + /* + * There are two mappings for the low 1MB area, the direct mapping + * and the 1:1 mapping for the real mode trampoline: + * + * Direct mapping: virt_addr = phys_addr + PAGE_OFFSET + * 1:1 mapping: virt_addr = phys_addr + */ + paddr = 0; + vaddr = (unsigned long)__va(paddr); + pgd = pgd_offset_k(vaddr); + + p4d = p4d_offset(pgd, vaddr); + pud = pud_offset(p4d, vaddr); + + pud_tramp = pud_page_tramp + pud_index(paddr); + *pud_tramp = *pud; + + if (pgtable_l5_enabled()) { + p4d_page_tramp = alloc_low_page(); + + p4d_tramp = p4d_page_tramp + p4d_index(paddr); + + set_p4d(p4d_tramp, + __p4d(_KERNPG_TABLE | __pa(pud_page_tramp))); + + set_pgd(&trampoline_pgd_entry, + __pgd(_KERNPG_TABLE | __pa(p4d_page_tramp))); + } else { + set_pgd(&trampoline_pgd_entry, + __pgd(_KERNPG_TABLE | __pa(pud_page_tramp))); + } +} -- cgit v1.2.3