From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/platform/efi/memmap.c | 239 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 239 insertions(+) create mode 100644 arch/x86/platform/efi/memmap.c (limited to 'arch/x86/platform/efi/memmap.c') diff --git a/arch/x86/platform/efi/memmap.c b/arch/x86/platform/efi/memmap.c new file mode 100644 index 000000000..c69f8471e --- /dev/null +++ b/arch/x86/platform/efi/memmap.c @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common EFI memory map functions. + */ + +#define pr_fmt(fmt) "efi: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +static phys_addr_t __init __efi_memmap_alloc_early(unsigned long size) +{ + return memblock_phys_alloc(size, SMP_CACHE_BYTES); +} + +static phys_addr_t __init __efi_memmap_alloc_late(unsigned long size) +{ + unsigned int order = get_order(size); + struct page *p = alloc_pages(GFP_KERNEL, order); + + if (!p) + return 0; + + return PFN_PHYS(page_to_pfn(p)); +} + +void __init __efi_memmap_free(u64 phys, unsigned long size, unsigned long flags) +{ + if (flags & EFI_MEMMAP_MEMBLOCK) { + if (slab_is_available()) + memblock_free_late(phys, size); + else + memblock_phys_free(phys, size); + } else if (flags & EFI_MEMMAP_SLAB) { + struct page *p = pfn_to_page(PHYS_PFN(phys)); + unsigned int order = get_order(size); + + free_pages((unsigned long) page_address(p), order); + } +} + +/** + * efi_memmap_alloc - Allocate memory for the EFI memory map + * @num_entries: Number of entries in the allocated map. + * @data: efi memmap installation parameters + * + * Depending on whether mm_init() has already been invoked or not, + * either memblock or "normal" page allocation is used. + * + * Returns zero on success, a negative error code on failure. + */ +int __init efi_memmap_alloc(unsigned int num_entries, + struct efi_memory_map_data *data) +{ + /* Expect allocation parameters are zero initialized */ + WARN_ON(data->phys_map || data->size); + + data->size = num_entries * efi.memmap.desc_size; + data->desc_version = efi.memmap.desc_version; + data->desc_size = efi.memmap.desc_size; + data->flags &= ~(EFI_MEMMAP_SLAB | EFI_MEMMAP_MEMBLOCK); + data->flags |= efi.memmap.flags & EFI_MEMMAP_LATE; + + if (slab_is_available()) { + data->flags |= EFI_MEMMAP_SLAB; + data->phys_map = __efi_memmap_alloc_late(data->size); + } else { + data->flags |= EFI_MEMMAP_MEMBLOCK; + data->phys_map = __efi_memmap_alloc_early(data->size); + } + + if (!data->phys_map) + return -ENOMEM; + return 0; +} + +/** + * efi_memmap_install - Install a new EFI memory map in efi.memmap + * @ctx: map allocation parameters (address, size, flags) + * + * Unlike efi_memmap_init_*(), this function does not allow the caller + * to switch from early to late mappings. It simply uses the existing + * mapping function and installs the new memmap. + * + * Returns zero on success, a negative error code on failure. + */ +int __init efi_memmap_install(struct efi_memory_map_data *data) +{ + efi_memmap_unmap(); + + if (efi_enabled(EFI_PARAVIRT)) + return 0; + + return __efi_memmap_init(data); +} + +/** + * efi_memmap_split_count - Count number of additional EFI memmap entries + * @md: EFI memory descriptor to split + * @range: Address range (start, end) to split around + * + * Returns the number of additional EFI memmap entries required to + * accommodate @range. + */ +int __init efi_memmap_split_count(efi_memory_desc_t *md, struct range *range) +{ + u64 m_start, m_end; + u64 start, end; + int count = 0; + + start = md->phys_addr; + end = start + (md->num_pages << EFI_PAGE_SHIFT) - 1; + + /* modifying range */ + m_start = range->start; + m_end = range->end; + + if (m_start <= start) { + /* split into 2 parts */ + if (start < m_end && m_end < end) + count++; + } + + if (start < m_start && m_start < end) { + /* split into 3 parts */ + if (m_end < end) + count += 2; + /* split into 2 parts */ + if (end <= m_end) + count++; + } + + return count; +} + +/** + * efi_memmap_insert - Insert a memory region in an EFI memmap + * @old_memmap: The existing EFI memory map structure + * @buf: Address of buffer to store new map + * @mem: Memory map entry to insert + * + * It is suggested that you call efi_memmap_split_count() first + * to see how large @buf needs to be. + */ +void __init efi_memmap_insert(struct efi_memory_map *old_memmap, void *buf, + struct efi_mem_range *mem) +{ + u64 m_start, m_end, m_attr; + efi_memory_desc_t *md; + u64 start, end; + void *old, *new; + + /* modifying range */ + m_start = mem->range.start; + m_end = mem->range.end; + m_attr = mem->attribute; + + /* + * The EFI memory map deals with regions in EFI_PAGE_SIZE + * units. Ensure that the region described by 'mem' is aligned + * correctly. + */ + if (!IS_ALIGNED(m_start, EFI_PAGE_SIZE) || + !IS_ALIGNED(m_end + 1, EFI_PAGE_SIZE)) { + WARN_ON(1); + return; + } + + for (old = old_memmap->map, new = buf; + old < old_memmap->map_end; + old += old_memmap->desc_size, new += old_memmap->desc_size) { + + /* copy original EFI memory descriptor */ + memcpy(new, old, old_memmap->desc_size); + md = new; + start = md->phys_addr; + end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1; + + if (m_start <= start && end <= m_end) + md->attribute |= m_attr; + + if (m_start <= start && + (start < m_end && m_end < end)) { + /* first part */ + md->attribute |= m_attr; + md->num_pages = (m_end - md->phys_addr + 1) >> + EFI_PAGE_SHIFT; + /* latter part */ + new += old_memmap->desc_size; + memcpy(new, old, old_memmap->desc_size); + md = new; + md->phys_addr = m_end + 1; + md->num_pages = (end - md->phys_addr + 1) >> + EFI_PAGE_SHIFT; + } + + if ((start < m_start && m_start < end) && m_end < end) { + /* first part */ + md->num_pages = (m_start - md->phys_addr) >> + EFI_PAGE_SHIFT; + /* middle part */ + new += old_memmap->desc_size; + memcpy(new, old, old_memmap->desc_size); + md = new; + md->attribute |= m_attr; + md->phys_addr = m_start; + md->num_pages = (m_end - m_start + 1) >> + EFI_PAGE_SHIFT; + /* last part */ + new += old_memmap->desc_size; + memcpy(new, old, old_memmap->desc_size); + md = new; + md->phys_addr = m_end + 1; + md->num_pages = (end - m_end) >> + EFI_PAGE_SHIFT; + } + + if ((start < m_start && m_start < end) && + (end <= m_end)) { + /* first part */ + md->num_pages = (m_start - md->phys_addr) >> + EFI_PAGE_SHIFT; + /* latter part */ + new += old_memmap->desc_size; + memcpy(new, old, old_memmap->desc_size); + md = new; + md->phys_addr = m_start; + md->num_pages = (end - md->phys_addr + 1) >> + EFI_PAGE_SHIFT; + md->attribute |= m_attr; + } + } +} -- cgit v1.2.3