From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/platform/geode/alix.c | 202 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 202 insertions(+) create mode 100644 arch/x86/platform/geode/alix.c (limited to 'arch/x86/platform/geode/alix.c') diff --git a/arch/x86/platform/geode/alix.c b/arch/x86/platform/geode/alix.c new file mode 100644 index 000000000..b39bf3b5e --- /dev/null +++ b/arch/x86/platform/geode/alix.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * System Specific setup for PCEngines ALIX. + * At the moment this means setup of GPIO control of LEDs + * on Alix.2/3/6 boards. + * + * Copyright (C) 2008 Constantin Baranov + * Copyright (C) 2011 Ed Wildgoose + * and Philip Prindeville + * + * TODO: There are large similarities with leds-net5501.c + * by Alessandro Zummo + * In the future leds-net5501.c should be migrated over to platform + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define BIOS_SIGNATURE_TINYBIOS 0xf0000 +#define BIOS_SIGNATURE_COREBOOT 0x500 +#define BIOS_REGION_SIZE 0x10000 + +/* + * This driver is not modular, but to keep back compatibility + * with existing use cases, continuing with module_param is + * the easiest way forward. + */ +static bool force = 0; +module_param(force, bool, 0444); +/* FIXME: Award bios is not automatically detected as Alix platform */ +MODULE_PARM_DESC(force, "Force detection as ALIX.2/ALIX.3 platform"); + +static struct gpio_keys_button alix_gpio_buttons[] = { + { + .code = KEY_RESTART, + .gpio = 24, + .active_low = 1, + .desc = "Reset button", + .type = EV_KEY, + .wakeup = 0, + .debounce_interval = 100, + .can_disable = 0, + } +}; +static struct gpio_keys_platform_data alix_buttons_data = { + .buttons = alix_gpio_buttons, + .nbuttons = ARRAY_SIZE(alix_gpio_buttons), + .poll_interval = 20, +}; + +static struct platform_device alix_buttons_dev = { + .name = "gpio-keys-polled", + .id = 1, + .dev = { + .platform_data = &alix_buttons_data, + } +}; + +static struct gpio_led alix_leds[] = { + { + .name = "alix:1", + .default_trigger = "default-on", + }, + { + .name = "alix:2", + .default_trigger = "default-off", + }, + { + .name = "alix:3", + .default_trigger = "default-off", + }, +}; + +static struct gpio_led_platform_data alix_leds_data = { + .num_leds = ARRAY_SIZE(alix_leds), + .leds = alix_leds, +}; + +static struct gpiod_lookup_table alix_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + /* The Geode GPIOs should be on the CS5535 companion chip */ + GPIO_LOOKUP_IDX("cs5535-gpio", 6, NULL, 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("cs5535-gpio", 25, NULL, 1, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("cs5535-gpio", 27, NULL, 2, GPIO_ACTIVE_LOW), + { } + }, +}; + +static struct platform_device alix_leds_dev = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &alix_leds_data, +}; + +static struct platform_device *alix_devs[] __initdata = { + &alix_buttons_dev, + &alix_leds_dev, +}; + +static void __init register_alix(void) +{ + /* Setup LED control through leds-gpio driver */ + gpiod_add_lookup_table(&alix_leds_gpio_table); + platform_add_devices(alix_devs, ARRAY_SIZE(alix_devs)); +} + +static bool __init alix_present(unsigned long bios_phys, + const char *alix_sig, + size_t alix_sig_len) +{ + const size_t bios_len = BIOS_REGION_SIZE; + const char *bios_virt; + const char *scan_end; + const char *p; + char name[64]; + + if (force) { + printk(KERN_NOTICE "%s: forced to skip BIOS test, " + "assume system is ALIX.2/ALIX.3\n", + KBUILD_MODNAME); + return true; + } + + bios_virt = phys_to_virt(bios_phys); + scan_end = bios_virt + bios_len - (alix_sig_len + 2); + for (p = bios_virt; p < scan_end; p++) { + const char *tail; + char *a; + + if (memcmp(p, alix_sig, alix_sig_len) != 0) + continue; + + memcpy(name, p, sizeof(name)); + + /* remove the first \0 character from string */ + a = strchr(name, '\0'); + if (a) + *a = ' '; + + /* cut the string at a newline */ + a = strchr(name, '\r'); + if (a) + *a = '\0'; + + tail = p + alix_sig_len; + if ((tail[0] == '2' || tail[0] == '3' || tail[0] == '6')) { + printk(KERN_INFO + "%s: system is recognized as \"%s\"\n", + KBUILD_MODNAME, name); + return true; + } + } + + return false; +} + +static bool __init alix_present_dmi(void) +{ + const char *vendor, *product; + + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!vendor || strcmp(vendor, "PC Engines")) + return false; + + product = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!product || (strcmp(product, "ALIX.2D") && strcmp(product, "ALIX.6"))) + return false; + + printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n", + KBUILD_MODNAME, vendor, product); + + return true; +} + +static int __init alix_init(void) +{ + const char tinybios_sig[] = "PC Engines ALIX."; + const char coreboot_sig[] = "PC Engines\0ALIX."; + + if (!is_geode()) + return 0; + + if (alix_present(BIOS_SIGNATURE_TINYBIOS, tinybios_sig, sizeof(tinybios_sig) - 1) || + alix_present(BIOS_SIGNATURE_COREBOOT, coreboot_sig, sizeof(coreboot_sig) - 1) || + alix_present_dmi()) + register_alix(); + + return 0; +} +device_initcall(alix_init); -- cgit v1.2.3