From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/platform/uv/uv_irq.c | 216 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 216 insertions(+) create mode 100644 arch/x86/platform/uv/uv_irq.c (limited to 'arch/x86/platform/uv/uv_irq.c') diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c new file mode 100644 index 000000000..ee21d6a36 --- /dev/null +++ b/arch/x86/platform/uv/uv_irq.c @@ -0,0 +1,216 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI UV IRQ functions + * + * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +/* MMR offset and pnode of hub sourcing interrupts for a given irq */ +struct uv_irq_2_mmr_pnode { + unsigned long offset; + int pnode; +}; + +static void uv_program_mmr(struct irq_cfg *cfg, struct uv_irq_2_mmr_pnode *info) +{ + unsigned long mmr_value; + struct uv_IO_APIC_route_entry *entry; + + BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != + sizeof(unsigned long)); + + mmr_value = 0; + entry = (struct uv_IO_APIC_route_entry *)&mmr_value; + entry->vector = cfg->vector; + entry->delivery_mode = apic->delivery_mode; + entry->dest_mode = apic->dest_mode_logical; + entry->polarity = 0; + entry->trigger = 0; + entry->mask = 0; + entry->dest = cfg->dest_apicid; + + uv_write_global_mmr64(info->pnode, info->offset, mmr_value); +} + +static void uv_noop(struct irq_data *data) { } + +static int +uv_set_irq_affinity(struct irq_data *data, const struct cpumask *mask, + bool force) +{ + struct irq_data *parent = data->parent_data; + struct irq_cfg *cfg = irqd_cfg(data); + int ret; + + ret = parent->chip->irq_set_affinity(parent, mask, force); + if (ret >= 0) { + uv_program_mmr(cfg, data->chip_data); + send_cleanup_vector(cfg); + } + + return ret; +} + +static struct irq_chip uv_irq_chip = { + .name = "UV-CORE", + .irq_mask = uv_noop, + .irq_unmask = uv_noop, + .irq_eoi = apic_ack_irq, + .irq_set_affinity = uv_set_irq_affinity, +}; + +static int uv_domain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *arg) +{ + struct uv_irq_2_mmr_pnode *chip_data; + struct irq_alloc_info *info = arg; + struct irq_data *irq_data = irq_domain_get_irq_data(domain, virq); + int ret; + + if (nr_irqs > 1 || !info || info->type != X86_IRQ_ALLOC_TYPE_UV) + return -EINVAL; + + chip_data = kmalloc_node(sizeof(*chip_data), GFP_KERNEL, + irq_data_get_node(irq_data)); + if (!chip_data) + return -ENOMEM; + + ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg); + if (ret >= 0) { + if (info->uv.limit == UV_AFFINITY_CPU) + irq_set_status_flags(virq, IRQ_NO_BALANCING); + else + irq_set_status_flags(virq, IRQ_MOVE_PCNTXT); + + chip_data->pnode = uv_blade_to_pnode(info->uv.blade); + chip_data->offset = info->uv.offset; + irq_domain_set_info(domain, virq, virq, &uv_irq_chip, chip_data, + handle_percpu_irq, NULL, info->uv.name); + } else { + kfree(chip_data); + } + + return ret; +} + +static void uv_domain_free(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs) +{ + struct irq_data *irq_data = irq_domain_get_irq_data(domain, virq); + + BUG_ON(nr_irqs != 1); + kfree(irq_data->chip_data); + irq_clear_status_flags(virq, IRQ_MOVE_PCNTXT); + irq_clear_status_flags(virq, IRQ_NO_BALANCING); + irq_domain_free_irqs_top(domain, virq, nr_irqs); +} + +/* + * Re-target the irq to the specified CPU and enable the specified MMR located + * on the specified blade to allow the sending of MSIs to the specified CPU. + */ +static int uv_domain_activate(struct irq_domain *domain, + struct irq_data *irq_data, bool reserve) +{ + uv_program_mmr(irqd_cfg(irq_data), irq_data->chip_data); + return 0; +} + +/* + * Disable the specified MMR located on the specified blade so that MSIs are + * longer allowed to be sent. + */ +static void uv_domain_deactivate(struct irq_domain *domain, + struct irq_data *irq_data) +{ + unsigned long mmr_value; + struct uv_IO_APIC_route_entry *entry; + + mmr_value = 0; + entry = (struct uv_IO_APIC_route_entry *)&mmr_value; + entry->mask = 1; + uv_program_mmr(irqd_cfg(irq_data), irq_data->chip_data); +} + +static const struct irq_domain_ops uv_domain_ops = { + .alloc = uv_domain_alloc, + .free = uv_domain_free, + .activate = uv_domain_activate, + .deactivate = uv_domain_deactivate, +}; + +static struct irq_domain *uv_get_irq_domain(void) +{ + static struct irq_domain *uv_domain; + static DEFINE_MUTEX(uv_lock); + struct fwnode_handle *fn; + + mutex_lock(&uv_lock); + if (uv_domain) + goto out; + + fn = irq_domain_alloc_named_fwnode("UV-CORE"); + if (!fn) + goto out; + + uv_domain = irq_domain_create_hierarchy(x86_vector_domain, 0, 0, fn, + &uv_domain_ops, NULL); + if (!uv_domain) + irq_domain_free_fwnode(fn); +out: + mutex_unlock(&uv_lock); + + return uv_domain; +} + +/* + * Set up a mapping of an available irq and vector, and enable the specified + * MMR that defines the MSI that is to be sent to the specified CPU when an + * interrupt is raised. + */ +int uv_setup_irq(char *irq_name, int cpu, int mmr_blade, + unsigned long mmr_offset, int limit) +{ + struct irq_alloc_info info; + struct irq_domain *domain = uv_get_irq_domain(); + + if (!domain) + return -ENOMEM; + + init_irq_alloc_info(&info, cpumask_of(cpu)); + info.type = X86_IRQ_ALLOC_TYPE_UV; + info.uv.limit = limit; + info.uv.blade = mmr_blade; + info.uv.offset = mmr_offset; + info.uv.name = irq_name; + + return irq_domain_alloc_irqs(domain, 1, + uv_blade_to_memory_nid(mmr_blade), &info); +} +EXPORT_SYMBOL_GPL(uv_setup_irq); + +/* + * Tear down a mapping of an irq and vector, and disable the specified MMR that + * defined the MSI that was to be sent to the specified CPU when an interrupt + * was raised. + * + * Set mmr_blade and mmr_offset to what was passed in on uv_setup_irq(). + */ +void uv_teardown_irq(unsigned int irq) +{ + irq_domain_free_irqs(irq, 1); +} +EXPORT_SYMBOL_GPL(uv_teardown_irq); -- cgit v1.2.3