From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/x86/um/asm/elf.h | 213 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 213 insertions(+) create mode 100644 arch/x86/um/asm/elf.h (limited to 'arch/x86/um/asm/elf.h') diff --git a/arch/x86/um/asm/elf.h b/arch/x86/um/asm/elf.h new file mode 100644 index 000000000..6523eb7c3 --- /dev/null +++ b/arch/x86/um/asm/elf.h @@ -0,0 +1,213 @@ +/* + * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) + * Licensed under the GPL + */ +#ifndef __UM_ELF_X86_H +#define __UM_ELF_X86_H + +#include +#include + +#ifdef CONFIG_X86_32 + +#define R_386_NONE 0 +#define R_386_32 1 +#define R_386_PC32 2 +#define R_386_GOT32 3 +#define R_386_PLT32 4 +#define R_386_COPY 5 +#define R_386_GLOB_DAT 6 +#define R_386_JMP_SLOT 7 +#define R_386_RELATIVE 8 +#define R_386_GOTOFF 9 +#define R_386_GOTPC 10 +#define R_386_NUM 11 + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) \ + (((x)->e_machine == EM_386) || ((x)->e_machine == EM_486)) + +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2LSB +#define ELF_ARCH EM_386 + +#define ELF_PLAT_INIT(regs, load_addr) do { \ + PT_REGS_BX(regs) = 0; \ + PT_REGS_CX(regs) = 0; \ + PT_REGS_DX(regs) = 0; \ + PT_REGS_SI(regs) = 0; \ + PT_REGS_DI(regs) = 0; \ + PT_REGS_BP(regs) = 0; \ + PT_REGS_AX(regs) = 0; \ +} while (0) + +/* Shamelessly stolen from include/asm-i386/elf.h */ + +#define ELF_CORE_COPY_REGS(pr_reg, regs) do { \ + pr_reg[0] = PT_REGS_BX(regs); \ + pr_reg[1] = PT_REGS_CX(regs); \ + pr_reg[2] = PT_REGS_DX(regs); \ + pr_reg[3] = PT_REGS_SI(regs); \ + pr_reg[4] = PT_REGS_DI(regs); \ + pr_reg[5] = PT_REGS_BP(regs); \ + pr_reg[6] = PT_REGS_AX(regs); \ + pr_reg[7] = PT_REGS_DS(regs); \ + pr_reg[8] = PT_REGS_ES(regs); \ + /* fake once used fs and gs selectors? */ \ + pr_reg[9] = PT_REGS_DS(regs); \ + pr_reg[10] = PT_REGS_DS(regs); \ + pr_reg[11] = PT_REGS_SYSCALL_NR(regs); \ + pr_reg[12] = PT_REGS_IP(regs); \ + pr_reg[13] = PT_REGS_CS(regs); \ + pr_reg[14] = PT_REGS_EFLAGS(regs); \ + pr_reg[15] = PT_REGS_SP(regs); \ + pr_reg[16] = PT_REGS_SS(regs); \ +} while (0); + +extern char * elf_aux_platform; +#define ELF_PLATFORM (elf_aux_platform) + +extern unsigned long vsyscall_ehdr; +extern unsigned long vsyscall_end; +extern unsigned long __kernel_vsyscall; + +/* + * This is the range that is readable by user mode, and things + * acting like user mode such as get_user_pages. + */ +#define FIXADDR_USER_START vsyscall_ehdr +#define FIXADDR_USER_END vsyscall_end + + +/* + * Architecture-neutral AT_ values in 0-17, leave some room + * for more of them, start the x86-specific ones at 32. + */ +#define AT_SYSINFO 32 +#define AT_SYSINFO_EHDR 33 + +#define ARCH_DLINFO \ +do { \ + if ( vsyscall_ehdr ) { \ + NEW_AUX_ENT(AT_SYSINFO, __kernel_vsyscall); \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, vsyscall_ehdr); \ + } \ +} while (0) + +#else + +/* x86-64 relocation types, taken from asm-x86_64/elf.h */ +#define R_X86_64_NONE 0 /* No reloc */ +#define R_X86_64_64 1 /* Direct 64 bit */ +#define R_X86_64_PC32 2 /* PC relative 32 bit signed */ +#define R_X86_64_GOT32 3 /* 32 bit GOT entry */ +#define R_X86_64_PLT32 4 /* 32 bit PLT address */ +#define R_X86_64_COPY 5 /* Copy symbol at runtime */ +#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */ +#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */ +#define R_X86_64_RELATIVE 8 /* Adjust by program base */ +#define R_X86_64_GOTPCREL 9 /* 32 bit signed pc relative + offset to GOT */ +#define R_X86_64_32 10 /* Direct 32 bit zero extended */ +#define R_X86_64_32S 11 /* Direct 32 bit sign extended */ +#define R_X86_64_16 12 /* Direct 16 bit zero extended */ +#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */ +#define R_X86_64_8 14 /* Direct 8 bit sign extended */ +#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */ +#define R_X86_64_PC64 24 /* Place relative 64-bit signed */ + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) \ + ((x)->e_machine == EM_X86_64) + +#define ELF_CLASS ELFCLASS64 +#define ELF_DATA ELFDATA2LSB +#define ELF_ARCH EM_X86_64 + +#define ELF_PLAT_INIT(regs, load_addr) do { \ + PT_REGS_BX(regs) = 0; \ + PT_REGS_CX(regs) = 0; \ + PT_REGS_DX(regs) = 0; \ + PT_REGS_SI(regs) = 0; \ + PT_REGS_DI(regs) = 0; \ + PT_REGS_BP(regs) = 0; \ + PT_REGS_AX(regs) = 0; \ + PT_REGS_R8(regs) = 0; \ + PT_REGS_R9(regs) = 0; \ + PT_REGS_R10(regs) = 0; \ + PT_REGS_R11(regs) = 0; \ + PT_REGS_R12(regs) = 0; \ + PT_REGS_R13(regs) = 0; \ + PT_REGS_R14(regs) = 0; \ + PT_REGS_R15(regs) = 0; \ +} while (0) + +#define ELF_CORE_COPY_REGS(pr_reg, _regs) \ + (pr_reg)[0] = (_regs)->regs.gp[0]; \ + (pr_reg)[1] = (_regs)->regs.gp[1]; \ + (pr_reg)[2] = (_regs)->regs.gp[2]; \ + (pr_reg)[3] = (_regs)->regs.gp[3]; \ + (pr_reg)[4] = (_regs)->regs.gp[4]; \ + (pr_reg)[5] = (_regs)->regs.gp[5]; \ + (pr_reg)[6] = (_regs)->regs.gp[6]; \ + (pr_reg)[7] = (_regs)->regs.gp[7]; \ + (pr_reg)[8] = (_regs)->regs.gp[8]; \ + (pr_reg)[9] = (_regs)->regs.gp[9]; \ + (pr_reg)[10] = (_regs)->regs.gp[10]; \ + (pr_reg)[11] = (_regs)->regs.gp[11]; \ + (pr_reg)[12] = (_regs)->regs.gp[12]; \ + (pr_reg)[13] = (_regs)->regs.gp[13]; \ + (pr_reg)[14] = (_regs)->regs.gp[14]; \ + (pr_reg)[15] = (_regs)->regs.gp[15]; \ + (pr_reg)[16] = (_regs)->regs.gp[16]; \ + (pr_reg)[17] = (_regs)->regs.gp[17]; \ + (pr_reg)[18] = (_regs)->regs.gp[18]; \ + (pr_reg)[19] = (_regs)->regs.gp[19]; \ + (pr_reg)[20] = (_regs)->regs.gp[20]; \ + (pr_reg)[21] = current->thread.arch.fs; \ + (pr_reg)[22] = 0; \ + (pr_reg)[23] = 0; \ + (pr_reg)[24] = 0; \ + (pr_reg)[25] = 0; \ + (pr_reg)[26] = 0; + +#define ELF_PLATFORM "x86_64" + +/* No user-accessible fixmap addresses, i.e. vsyscall */ +#define FIXADDR_USER_START 0 +#define FIXADDR_USER_END 0 + +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 +struct linux_binprm; +extern int arch_setup_additional_pages(struct linux_binprm *bprm, + int uses_interp); + +extern unsigned long um_vdso_addr; +#define AT_SYSINFO_EHDR 33 +#define ARCH_DLINFO NEW_AUX_ENT(AT_SYSINFO_EHDR, um_vdso_addr) + +#endif + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_i387_struct elf_fpregset_t; + +struct task_struct; + +#define ELF_EXEC_PAGESIZE 4096 + +#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) + +extern long elf_aux_hwcap; +#define ELF_HWCAP (elf_aux_hwcap) + +#define SET_PERSONALITY(ex) do {} while(0) + +#endif -- cgit v1.2.3