From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/xtensa/lib/umulsidi3.S | 230 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 230 insertions(+) create mode 100644 arch/xtensa/lib/umulsidi3.S (limited to 'arch/xtensa/lib/umulsidi3.S') diff --git a/arch/xtensa/lib/umulsidi3.S b/arch/xtensa/lib/umulsidi3.S new file mode 100644 index 000000000..136081647 --- /dev/null +++ b/arch/xtensa/lib/umulsidi3.S @@ -0,0 +1,230 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later WITH GCC-exception-2.0 */ +#include +#include +#include + +#if !XCHAL_HAVE_MUL16 && !XCHAL_HAVE_MUL32 && !XCHAL_HAVE_MAC16 +#define XCHAL_NO_MUL 1 +#endif + +ENTRY(__umulsidi3) + +#ifdef __XTENSA_CALL0_ABI__ + abi_entry(32) + s32i a12, sp, 16 + s32i a13, sp, 20 + s32i a14, sp, 24 + s32i a15, sp, 28 +#elif XCHAL_NO_MUL + /* This is not really a leaf function; allocate enough stack space + to allow CALL12s to a helper function. */ + abi_entry(32) +#else + abi_entry_default +#endif + +#ifdef __XTENSA_EB__ +#define wh a2 +#define wl a3 +#else +#define wh a3 +#define wl a2 +#endif /* __XTENSA_EB__ */ + + /* This code is taken from the mulsf3 routine in ieee754-sf.S. + See more comments there. */ + +#if XCHAL_HAVE_MUL32_HIGH + mull a6, a2, a3 + muluh wh, a2, a3 + mov wl, a6 + +#else /* ! MUL32_HIGH */ + +#if defined(__XTENSA_CALL0_ABI__) && XCHAL_NO_MUL + /* a0 and a8 will be clobbered by calling the multiply function + but a8 is not used here and need not be saved. */ + s32i a0, sp, 0 +#endif + +#if XCHAL_HAVE_MUL16 || XCHAL_HAVE_MUL32 + +#define a2h a4 +#define a3h a5 + + /* Get the high halves of the inputs into registers. */ + srli a2h, a2, 16 + srli a3h, a3, 16 + +#define a2l a2 +#define a3l a3 + +#if XCHAL_HAVE_MUL32 && !XCHAL_HAVE_MUL16 + /* Clear the high halves of the inputs. This does not matter + for MUL16 because the high bits are ignored. */ + extui a2, a2, 0, 16 + extui a3, a3, 0, 16 +#endif +#endif /* MUL16 || MUL32 */ + + +#if XCHAL_HAVE_MUL16 + +#define do_mul(dst, xreg, xhalf, yreg, yhalf) \ + mul16u dst, xreg ## xhalf, yreg ## yhalf + +#elif XCHAL_HAVE_MUL32 + +#define do_mul(dst, xreg, xhalf, yreg, yhalf) \ + mull dst, xreg ## xhalf, yreg ## yhalf + +#elif XCHAL_HAVE_MAC16 + +/* The preprocessor insists on inserting a space when concatenating after + a period in the definition of do_mul below. These macros are a workaround + using underscores instead of periods when doing the concatenation. */ +#define umul_aa_ll umul.aa.ll +#define umul_aa_lh umul.aa.lh +#define umul_aa_hl umul.aa.hl +#define umul_aa_hh umul.aa.hh + +#define do_mul(dst, xreg, xhalf, yreg, yhalf) \ + umul_aa_ ## xhalf ## yhalf xreg, yreg; \ + rsr dst, ACCLO + +#else /* no multiply hardware */ + +#define set_arg_l(dst, src) \ + extui dst, src, 0, 16 +#define set_arg_h(dst, src) \ + srli dst, src, 16 + +#ifdef __XTENSA_CALL0_ABI__ +#define do_mul(dst, xreg, xhalf, yreg, yhalf) \ + set_arg_ ## xhalf (a13, xreg); \ + set_arg_ ## yhalf (a14, yreg); \ + call0 .Lmul_mulsi3; \ + mov dst, a12 +#else +#define do_mul(dst, xreg, xhalf, yreg, yhalf) \ + set_arg_ ## xhalf (a14, xreg); \ + set_arg_ ## yhalf (a15, yreg); \ + call12 .Lmul_mulsi3; \ + mov dst, a14 +#endif /* __XTENSA_CALL0_ABI__ */ + +#endif /* no multiply hardware */ + + /* Add pp1 and pp2 into a6 with carry-out in a9. */ + do_mul(a6, a2, l, a3, h) /* pp 1 */ + do_mul(a11, a2, h, a3, l) /* pp 2 */ + movi a9, 0 + add a6, a6, a11 + bgeu a6, a11, 1f + addi a9, a9, 1 +1: + /* Shift the high half of a9/a6 into position in a9. Note that + this value can be safely incremented without any carry-outs. */ + ssai 16 + src a9, a9, a6 + + /* Compute the low word into a6. */ + do_mul(a11, a2, l, a3, l) /* pp 0 */ + sll a6, a6 + add a6, a6, a11 + bgeu a6, a11, 1f + addi a9, a9, 1 +1: + /* Compute the high word into wh. */ + do_mul(wh, a2, h, a3, h) /* pp 3 */ + add wh, wh, a9 + mov wl, a6 + +#endif /* !MUL32_HIGH */ + +#if defined(__XTENSA_CALL0_ABI__) && XCHAL_NO_MUL + /* Restore the original return address. */ + l32i a0, sp, 0 +#endif +#ifdef __XTENSA_CALL0_ABI__ + l32i a12, sp, 16 + l32i a13, sp, 20 + l32i a14, sp, 24 + l32i a15, sp, 28 + abi_ret(32) +#else + abi_ret_default +#endif + +#if XCHAL_NO_MUL + + .macro do_addx2 dst, as, at, tmp +#if XCHAL_HAVE_ADDX + addx2 \dst, \as, \at +#else + slli \tmp, \as, 1 + add \dst, \tmp, \at +#endif + .endm + + .macro do_addx4 dst, as, at, tmp +#if XCHAL_HAVE_ADDX + addx4 \dst, \as, \at +#else + slli \tmp, \as, 2 + add \dst, \tmp, \at +#endif + .endm + + .macro do_addx8 dst, as, at, tmp +#if XCHAL_HAVE_ADDX + addx8 \dst, \as, \at +#else + slli \tmp, \as, 3 + add \dst, \tmp, \at +#endif + .endm + + /* For Xtensa processors with no multiply hardware, this simplified + version of _mulsi3 is used for multiplying 16-bit chunks of + the floating-point mantissas. When using CALL0, this function + uses a custom ABI: the inputs are passed in a13 and a14, the + result is returned in a12, and a8 and a15 are clobbered. */ + .align 4 +.Lmul_mulsi3: + abi_entry_default + + .macro mul_mulsi3_body dst, src1, src2, tmp1, tmp2 + movi \dst, 0 +1: add \tmp1, \src2, \dst + extui \tmp2, \src1, 0, 1 + movnez \dst, \tmp1, \tmp2 + + do_addx2 \tmp1, \src2, \dst, \tmp1 + extui \tmp2, \src1, 1, 1 + movnez \dst, \tmp1, \tmp2 + + do_addx4 \tmp1, \src2, \dst, \tmp1 + extui \tmp2, \src1, 2, 1 + movnez \dst, \tmp1, \tmp2 + + do_addx8 \tmp1, \src2, \dst, \tmp1 + extui \tmp2, \src1, 3, 1 + movnez \dst, \tmp1, \tmp2 + + srli \src1, \src1, 4 + slli \src2, \src2, 4 + bnez \src1, 1b + .endm + +#ifdef __XTENSA_CALL0_ABI__ + mul_mulsi3_body a12, a13, a14, a15, a8 +#else + /* The result will be written into a2, so save that argument in a4. */ + mov a4, a2 + mul_mulsi3_body a2, a4, a3, a5, a6 +#endif + abi_ret_default +#endif /* XCHAL_NO_MUL */ + +ENDPROC(__umulsidi3) -- cgit v1.2.3