From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- crypto/ecc_curve_defs.h | 106 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) create mode 100644 crypto/ecc_curve_defs.h (limited to 'crypto/ecc_curve_defs.h') diff --git a/crypto/ecc_curve_defs.h b/crypto/ecc_curve_defs.h new file mode 100644 index 000000000..9719934c9 --- /dev/null +++ b/crypto/ecc_curve_defs.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _CRYTO_ECC_CURVE_DEFS_H +#define _CRYTO_ECC_CURVE_DEFS_H + +/* NIST P-192: a = p - 3 */ +static u64 nist_p192_g_x[] = { 0xF4FF0AFD82FF1012ull, 0x7CBF20EB43A18800ull, + 0x188DA80EB03090F6ull }; +static u64 nist_p192_g_y[] = { 0x73F977A11E794811ull, 0x631011ED6B24CDD5ull, + 0x07192B95FFC8DA78ull }; +static u64 nist_p192_p[] = { 0xFFFFFFFFFFFFFFFFull, 0xFFFFFFFFFFFFFFFEull, + 0xFFFFFFFFFFFFFFFFull }; +static u64 nist_p192_n[] = { 0x146BC9B1B4D22831ull, 0xFFFFFFFF99DEF836ull, + 0xFFFFFFFFFFFFFFFFull }; +static u64 nist_p192_a[] = { 0xFFFFFFFFFFFFFFFCull, 0xFFFFFFFFFFFFFFFEull, + 0xFFFFFFFFFFFFFFFFull }; +static u64 nist_p192_b[] = { 0xFEB8DEECC146B9B1ull, 0x0FA7E9AB72243049ull, + 0x64210519E59C80E7ull }; +static struct ecc_curve nist_p192 = { + .name = "nist_192", + .g = { + .x = nist_p192_g_x, + .y = nist_p192_g_y, + .ndigits = 3, + }, + .p = nist_p192_p, + .n = nist_p192_n, + .a = nist_p192_a, + .b = nist_p192_b +}; + +/* NIST P-256: a = p - 3 */ +static u64 nist_p256_g_x[] = { 0xF4A13945D898C296ull, 0x77037D812DEB33A0ull, + 0xF8BCE6E563A440F2ull, 0x6B17D1F2E12C4247ull }; +static u64 nist_p256_g_y[] = { 0xCBB6406837BF51F5ull, 0x2BCE33576B315ECEull, + 0x8EE7EB4A7C0F9E16ull, 0x4FE342E2FE1A7F9Bull }; +static u64 nist_p256_p[] = { 0xFFFFFFFFFFFFFFFFull, 0x00000000FFFFFFFFull, + 0x0000000000000000ull, 0xFFFFFFFF00000001ull }; +static u64 nist_p256_n[] = { 0xF3B9CAC2FC632551ull, 0xBCE6FAADA7179E84ull, + 0xFFFFFFFFFFFFFFFFull, 0xFFFFFFFF00000000ull }; +static u64 nist_p256_a[] = { 0xFFFFFFFFFFFFFFFCull, 0x00000000FFFFFFFFull, + 0x0000000000000000ull, 0xFFFFFFFF00000001ull }; +static u64 nist_p256_b[] = { 0x3BCE3C3E27D2604Bull, 0x651D06B0CC53B0F6ull, + 0xB3EBBD55769886BCull, 0x5AC635D8AA3A93E7ull }; +static struct ecc_curve nist_p256 = { + .name = "nist_256", + .g = { + .x = nist_p256_g_x, + .y = nist_p256_g_y, + .ndigits = 4, + }, + .p = nist_p256_p, + .n = nist_p256_n, + .a = nist_p256_a, + .b = nist_p256_b +}; + +/* NIST P-384 */ +static u64 nist_p384_g_x[] = { 0x3A545E3872760AB7ull, 0x5502F25DBF55296Cull, + 0x59F741E082542A38ull, 0x6E1D3B628BA79B98ull, + 0x8Eb1C71EF320AD74ull, 0xAA87CA22BE8B0537ull }; +static u64 nist_p384_g_y[] = { 0x7A431D7C90EA0E5Full, 0x0A60B1CE1D7E819Dull, + 0xE9DA3113B5F0B8C0ull, 0xF8F41DBD289A147Cull, + 0x5D9E98BF9292DC29ull, 0x3617DE4A96262C6Full }; +static u64 nist_p384_p[] = { 0x00000000FFFFFFFFull, 0xFFFFFFFF00000000ull, + 0xFFFFFFFFFFFFFFFEull, 0xFFFFFFFFFFFFFFFFull, + 0xFFFFFFFFFFFFFFFFull, 0xFFFFFFFFFFFFFFFFull }; +static u64 nist_p384_n[] = { 0xECEC196ACCC52973ull, 0x581A0DB248B0A77Aull, + 0xC7634D81F4372DDFull, 0xFFFFFFFFFFFFFFFFull, + 0xFFFFFFFFFFFFFFFFull, 0xFFFFFFFFFFFFFFFFull }; +static u64 nist_p384_a[] = { 0x00000000FFFFFFFCull, 0xFFFFFFFF00000000ull, + 0xFFFFFFFFFFFFFFFEull, 0xFFFFFFFFFFFFFFFFull, + 0xFFFFFFFFFFFFFFFFull, 0xFFFFFFFFFFFFFFFFull }; +static u64 nist_p384_b[] = { 0x2a85c8edd3ec2aefull, 0xc656398d8a2ed19dull, + 0x0314088f5013875aull, 0x181d9c6efe814112ull, + 0x988e056be3f82d19ull, 0xb3312fa7e23ee7e4ull }; +static struct ecc_curve nist_p384 = { + .name = "nist_384", + .g = { + .x = nist_p384_g_x, + .y = nist_p384_g_y, + .ndigits = 6, + }, + .p = nist_p384_p, + .n = nist_p384_n, + .a = nist_p384_a, + .b = nist_p384_b +}; + +/* curve25519 */ +static u64 curve25519_g_x[] = { 0x0000000000000009, 0x0000000000000000, + 0x0000000000000000, 0x0000000000000000 }; +static u64 curve25519_p[] = { 0xffffffffffffffed, 0xffffffffffffffff, + 0xffffffffffffffff, 0x7fffffffffffffff }; +static u64 curve25519_a[] = { 0x000000000001DB41, 0x0000000000000000, + 0x0000000000000000, 0x0000000000000000 }; +static const struct ecc_curve ecc_25519 = { + .name = "curve25519", + .g = { + .x = curve25519_g_x, + .ndigits = 4, + }, + .p = curve25519_p, + .a = curve25519_a, +}; + +#endif -- cgit v1.2.3