From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/acpi/acpi_adxl.c | 192 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 192 insertions(+) create mode 100644 drivers/acpi/acpi_adxl.c (limited to 'drivers/acpi/acpi_adxl.c') diff --git a/drivers/acpi/acpi_adxl.c b/drivers/acpi/acpi_adxl.c new file mode 100644 index 000000000..13c8f7b50 --- /dev/null +++ b/drivers/acpi/acpi_adxl.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Address translation interface via ACPI DSM. + * Copyright (C) 2018 Intel Corporation + * + * Specification for this interface is available at: + * + * https://cdrdv2.intel.com/v1/dl/getContent/603354 + */ + +#include +#include + +#define ADXL_REVISION 0x1 +#define ADXL_IDX_GET_ADDR_PARAMS 0x1 +#define ADXL_IDX_FORWARD_TRANSLATE 0x2 +#define ACPI_ADXL_PATH "\\_SB.ADXL" + +/* + * The specification doesn't provide a limit on how many + * components are in a memory address. But since we allocate + * memory based on the number the BIOS tells us, we should + * defend against insane values. + */ +#define ADXL_MAX_COMPONENTS 500 + +#undef pr_fmt +#define pr_fmt(fmt) "ADXL: " fmt + +static acpi_handle handle; +static union acpi_object *params; +static const guid_t adxl_guid = + GUID_INIT(0xAA3C050A, 0x7EA4, 0x4C1F, + 0xAF, 0xDA, 0x12, 0x67, 0xDF, 0xD3, 0xD4, 0x8D); + +static int adxl_count; +static char **adxl_component_names; + +static union acpi_object *adxl_dsm(int cmd, union acpi_object argv[]) +{ + union acpi_object *obj, *o; + + obj = acpi_evaluate_dsm_typed(handle, &adxl_guid, ADXL_REVISION, + cmd, argv, ACPI_TYPE_PACKAGE); + if (!obj) { + pr_info("DSM call failed for cmd=%d\n", cmd); + return NULL; + } + + if (obj->package.count != 2) { + pr_info("Bad pkg count %d\n", obj->package.count); + goto err; + } + + o = obj->package.elements; + if (o->type != ACPI_TYPE_INTEGER) { + pr_info("Bad 1st element type %d\n", o->type); + goto err; + } + if (o->integer.value) { + pr_info("Bad ret val %llu\n", o->integer.value); + goto err; + } + + o = obj->package.elements + 1; + if (o->type != ACPI_TYPE_PACKAGE) { + pr_info("Bad 2nd element type %d\n", o->type); + goto err; + } + return obj; + +err: + ACPI_FREE(obj); + return NULL; +} + +/** + * adxl_get_component_names - get list of memory component names + * Returns NULL terminated list of string names + * + * Give the caller a pointer to the list of memory component names + * e.g. { "SystemAddress", "ProcessorSocketId", "ChannelId", ... NULL } + * Caller should count how many strings in order to allocate a buffer + * for the return from adxl_decode(). + */ +const char * const *adxl_get_component_names(void) +{ + return (const char * const *)adxl_component_names; +} +EXPORT_SYMBOL_GPL(adxl_get_component_names); + +/** + * adxl_decode - ask BIOS to decode a system address to memory address + * @addr: the address to decode + * @component_values: pointer to array of values for each component + * Returns 0 on success, negative error code otherwise + * + * The index of each value returned in the array matches the index of + * each component name returned by adxl_get_component_names(). + * Components that are not defined for this address translation (e.g. + * mirror channel number for a non-mirrored address) are set to ~0ull. + */ +int adxl_decode(u64 addr, u64 component_values[]) +{ + union acpi_object argv4[2], *results, *r; + int i, cnt; + + if (!adxl_component_names) + return -EOPNOTSUPP; + + argv4[0].type = ACPI_TYPE_PACKAGE; + argv4[0].package.count = 1; + argv4[0].package.elements = &argv4[1]; + argv4[1].integer.type = ACPI_TYPE_INTEGER; + argv4[1].integer.value = addr; + + results = adxl_dsm(ADXL_IDX_FORWARD_TRANSLATE, argv4); + if (!results) + return -EINVAL; + + r = results->package.elements + 1; + cnt = r->package.count; + if (cnt != adxl_count) { + ACPI_FREE(results); + return -EINVAL; + } + r = r->package.elements; + + for (i = 0; i < cnt; i++) + component_values[i] = r[i].integer.value; + + ACPI_FREE(results); + + return 0; +} +EXPORT_SYMBOL_GPL(adxl_decode); + +static int __init adxl_init(void) +{ + char *path = ACPI_ADXL_PATH; + union acpi_object *p; + acpi_status status; + int i; + + status = acpi_get_handle(NULL, path, &handle); + if (ACPI_FAILURE(status)) { + pr_debug("No ACPI handle for path %s\n", path); + return -ENODEV; + } + + if (!acpi_has_method(handle, "_DSM")) { + pr_info("No DSM method\n"); + return -ENODEV; + } + + if (!acpi_check_dsm(handle, &adxl_guid, ADXL_REVISION, + ADXL_IDX_GET_ADDR_PARAMS | + ADXL_IDX_FORWARD_TRANSLATE)) { + pr_info("DSM method does not support forward translate\n"); + return -ENODEV; + } + + params = adxl_dsm(ADXL_IDX_GET_ADDR_PARAMS, NULL); + if (!params) { + pr_info("Failed to get component names\n"); + return -ENODEV; + } + + p = params->package.elements + 1; + adxl_count = p->package.count; + if (adxl_count > ADXL_MAX_COMPONENTS) { + pr_info("Insane number of address component names %d\n", adxl_count); + ACPI_FREE(params); + return -ENODEV; + } + p = p->package.elements; + + /* + * Allocate one extra for NULL termination. + */ + adxl_component_names = kcalloc(adxl_count + 1, sizeof(char *), GFP_KERNEL); + if (!adxl_component_names) { + ACPI_FREE(params); + return -ENOMEM; + } + + for (i = 0; i < adxl_count; i++) + adxl_component_names[i] = p[i].string.pointer; + + return 0; +} +subsys_initcall(adxl_init); -- cgit v1.2.3