From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/acpi/acpica/Makefile | 212 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 212 insertions(+) create mode 100644 drivers/acpi/acpica/Makefile (limited to 'drivers/acpi/acpica/Makefile') diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile new file mode 100644 index 000000000..30f3fc13c --- /dev/null +++ b/drivers/acpi/acpica/Makefile @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for ACPICA Core interpreter +# + +ccflags-y := -D_LINUX -DBUILDING_ACPICA +ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT + +# use acpi.o to put all files here into acpi.o modparam namespace +obj-y += acpi.o + +acpi-y := \ + dsargs.o \ + dscontrol.o \ + dsdebug.o \ + dsfield.o \ + dsinit.o \ + dsmethod.o \ + dsmthdat.o \ + dsobject.o \ + dsopcode.o \ + dspkginit.o \ + dsutils.o \ + dswexec.o \ + dswload.o \ + dswload2.o \ + dswscope.o \ + dswstate.o + +acpi-y += \ + evevent.o \ + evgpe.o \ + evgpeblk.o \ + evgpeinit.o \ + evgpeutil.o \ + evglock.o \ + evhandler.o \ + evmisc.o \ + evregion.o \ + evrgnini.o \ + evsci.o \ + evxface.o \ + evxfevnt.o \ + evxfgpe.o \ + evxfregn.o + +acpi-y += \ + exconcat.o \ + exconfig.o \ + exconvrt.o \ + excreate.o \ + exdebug.o \ + exdump.o \ + exfield.o \ + exfldio.o \ + exmisc.o \ + exmutex.o \ + exnames.o \ + exoparg1.o \ + exoparg2.o \ + exoparg3.o \ + exoparg6.o \ + exprep.o \ + exregion.o \ + exresnte.o \ + exresolv.o \ + exresop.o \ + exserial.o \ + exstore.o \ + exstoren.o \ + exstorob.o \ + exsystem.o \ + extrace.o \ + exutils.o + +acpi-y += \ + hwacpi.o \ + hwesleep.o \ + hwgpe.o \ + hwregs.o \ + hwsleep.o \ + hwvalid.o \ + hwxface.o \ + hwxfsleep.o + +acpi-$(CONFIG_PCI) += hwpci.o +acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o + +acpi-y += \ + nsaccess.o \ + nsalloc.o \ + nsarguments.o \ + nsconvert.o \ + nsdump.o \ + nseval.o \ + nsinit.o \ + nsload.o \ + nsnames.o \ + nsobject.o \ + nsparse.o \ + nspredef.o \ + nsprepkg.o \ + nsrepair.o \ + nsrepair2.o \ + nssearch.o \ + nsutils.o \ + nswalk.o \ + nsxfeval.o \ + nsxfname.o \ + nsxfobj.o + +acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o + +acpi-y += \ + psargs.o \ + psloop.o \ + psobject.o \ + psopcode.o \ + psopinfo.o \ + psparse.o \ + psscope.o \ + pstree.o \ + psutils.o \ + pswalk.o \ + psxface.o + +acpi-y += \ + rsaddr.o \ + rscalc.o \ + rscreate.o \ + rsdumpinfo.o \ + rsinfo.o \ + rsio.o \ + rsirq.o \ + rslist.o \ + rsmemory.o \ + rsmisc.o \ + rsserial.o \ + rsutils.o \ + rsxface.o + +acpi-y += \ + tbdata.o \ + tbfadt.o \ + tbfind.o \ + tbinstal.o \ + tbprint.o \ + tbutils.o \ + tbxface.o \ + tbxfload.o \ + tbxfroot.o + +acpi-y += \ + utaddress.o \ + utalloc.o \ + utascii.o \ + utbuffer.o \ + utcksum.o \ + utcopy.o \ + utexcep.o \ + utdebug.o \ + utdecode.o \ + utdelete.o \ + uterror.o \ + uteval.o \ + utglobal.o \ + uthex.o \ + utids.o \ + utinit.o \ + utlock.o \ + utmath.o \ + utmisc.o \ + utmutex.o \ + utnonansi.o \ + utobject.o \ + utosi.o \ + utownerid.o \ + utpredef.o \ + utresdecode.o \ + utresrc.o \ + utstate.o \ + utstring.o \ + utstrsuppt.o \ + utstrtoul64.o \ + utxface.o \ + utxfinit.o \ + utxferror.o \ + utxfmutex.o + +acpi-$(CONFIG_ACPI_DEBUGGER) += \ + dbcmds.o \ + dbconvert.o \ + dbdisply.o \ + dbexec.o \ + dbhistry.o \ + dbinput.o \ + dbmethod.o \ + dbnames.o \ + dbobject.o \ + dbstats.o \ + dbutils.o \ + dbxface.o \ + rsdump.o \ + +acpi-$(ACPI_FUTURE_USAGE) += \ + dbfileio.o \ + dbtest.o \ + utcache.o \ + utprint.o \ + uttrack.o \ + utuuid.o + -- cgit v1.2.3