From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/acpi/acpica/hwesleep.c | 204 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 204 insertions(+) create mode 100644 drivers/acpi/acpica/hwesleep.c (limited to 'drivers/acpi/acpica/hwesleep.c') diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c new file mode 100644 index 000000000..d8597e052 --- /dev/null +++ b/drivers/acpi/acpica/hwesleep.c @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Name: hwesleep.c - ACPI Hardware Sleep/Wake Support functions for the + * extended FADT-V5 sleep registers. + * + * Copyright (C) 2000 - 2022, Intel Corp. + * + *****************************************************************************/ + +#include +#include "accommon.h" + +#define _COMPONENT ACPI_HARDWARE +ACPI_MODULE_NAME("hwesleep") + +/******************************************************************************* + * + * FUNCTION: acpi_hw_execute_sleep_method + * + * PARAMETERS: method_pathname - Pathname of method to execute + * integer_argument - Argument to pass to the method + * + * RETURN: None + * + * DESCRIPTION: Execute a sleep/wake related method with one integer argument + * and no return value. + * + ******************************************************************************/ +void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; + + ACPI_FUNCTION_TRACE(hw_execute_sleep_method); + + /* One argument, integer_argument; No return value expected */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = (u64)integer_argument; + + status = acpi_evaluate_object(NULL, method_pathname, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "While executing method %s", + method_pathname)); + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_sleep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state via the extended FADT sleep + * registers (V5 FADT). + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_sleep(u8 sleep_state) +{ + acpi_status status; + u8 sleep_control; + u64 sleep_status; + + ACPI_FUNCTION_TRACE(hw_extended_sleep); + + /* Extended sleep registers must be valid */ + + if (!acpi_gbl_FADT.sleep_control.address || + !acpi_gbl_FADT.sleep_status.address) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Clear wake status (WAK_STS) */ + + status = acpi_write((u64)ACPI_X_WAKE_STATUS, + &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_gbl_system_awake_and_running = FALSE; + + /* + * Set the SLP_TYP and SLP_EN bits. + * + * Note: We only use the first value returned by the \_Sx method + * (acpi_gbl_sleep_type_a) - As per ACPI specification. + */ + ACPI_DEBUG_PRINT((ACPI_DB_INIT, + "Entering sleep state [S%u]\n", sleep_state)); + + sleep_control = ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK) | ACPI_X_SLEEP_ENABLE; + + /* Flush caches, as per ACPI specification */ + + if (sleep_state < ACPI_STATE_S4) { + ACPI_FLUSH_CPU_CACHE(); + } + + status = acpi_os_enter_sleep(sleep_state, sleep_control, 0); + if (status == AE_CTRL_TERMINATE) { + return_ACPI_STATUS(AE_OK); + } + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_write((u64)sleep_control, &acpi_gbl_FADT.sleep_control); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Wait for transition back to Working State */ + + do { + status = acpi_read(&sleep_status, &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + } while (!(((u8)sleep_status) & ACPI_X_WAKE_STATUS)); + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake_prep + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * + * RETURN: Status + * + * DESCRIPTION: Perform first part of OS-independent ACPI cleanup after + * a sleep. Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) +{ + u8 sleep_type_value; + + ACPI_FUNCTION_TRACE(hw_extended_wake_prep); + + if (acpi_gbl_sleep_type_a_s0 != ACPI_SLEEP_TYPE_INVALID) { + sleep_type_value = + ((acpi_gbl_sleep_type_a_s0 << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK); + + (void)acpi_write((u64)(sleep_type_value | ACPI_X_SLEEP_ENABLE), + &acpi_gbl_FADT.sleep_control); + } + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake(u8 sleep_state) +{ + ACPI_FUNCTION_TRACE(hw_extended_wake); + + /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ + + acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; + + /* Execute the wake methods */ + + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state); + + /* + * Some BIOS code assumes that WAK_STS will be cleared on resume + * and use it to determine whether the system is rebooting or + * resuming. Clear WAK_STS for compatibility. + */ + (void)acpi_write((u64)ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + acpi_gbl_system_awake_and_running = TRUE; + + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); + return_ACPI_STATUS(AE_OK); +} -- cgit v1.2.3