From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/acpi/pci_slot.c | 187 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 187 insertions(+) create mode 100644 drivers/acpi/pci_slot.c (limited to 'drivers/acpi/pci_slot.c') diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c new file mode 100644 index 000000000..d6cb2c27a --- /dev/null +++ b/drivers/acpi/pci_slot.c @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * pci_slot.c - ACPI PCI Slot Driver + * + * The code here is heavily leveraged from the acpiphp module. + * Thanks to Matthew Wilcox for much guidance. + * Thanks to Kenji Kaneshige for code + * review and fixes. + * + * Copyright (C) 2007-2008 Hewlett-Packard Development Company, L.P. + * Alex Chiang + * + * Copyright (C) 2013 Huawei Tech. Co., Ltd. + * Jiang Liu + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int check_sta_before_sun; + +#define SLOT_NAME_SIZE 21 /* Inspired by #define in acpiphp.h */ + +struct acpi_pci_slot { + struct pci_slot *pci_slot; /* corresponding pci_slot */ + struct list_head list; /* node in the list of slots */ +}; + +static LIST_HEAD(slot_list); +static DEFINE_MUTEX(slot_list_lock); + +static int +check_slot(acpi_handle handle, unsigned long long *sun) +{ + int device = -1; + unsigned long long adr, sta; + acpi_status status; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + + acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); + pr_debug("Checking slot on path: %s\n", (char *)buffer.pointer); + + if (check_sta_before_sun) { + /* If SxFy doesn't have _STA, we just assume it's there */ + status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); + if (ACPI_SUCCESS(status) && !(sta & ACPI_STA_DEVICE_PRESENT)) + goto out; + } + + status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr); + if (ACPI_FAILURE(status)) { + pr_debug("_ADR returned %d on %s\n", + status, (char *)buffer.pointer); + goto out; + } + + /* No _SUN == not a slot == bail */ + status = acpi_evaluate_integer(handle, "_SUN", NULL, sun); + if (ACPI_FAILURE(status)) { + pr_debug("_SUN returned %d on %s\n", + status, (char *)buffer.pointer); + goto out; + } + + device = (adr >> 16) & 0xffff; +out: + kfree(buffer.pointer); + return device; +} + +/* + * Check whether handle has an associated slot and create PCI slot if it has. + */ +static acpi_status +register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + int device; + unsigned long long sun; + char name[SLOT_NAME_SIZE]; + struct acpi_pci_slot *slot; + struct pci_slot *pci_slot; + struct pci_bus *pci_bus = context; + + device = check_slot(handle, &sun); + if (device < 0) + return AE_OK; + + /* + * There may be multiple PCI functions associated with the same slot. + * Check whether PCI slot has already been created for this PCI device. + */ + list_for_each_entry(slot, &slot_list, list) { + pci_slot = slot->pci_slot; + if (pci_slot->bus == pci_bus && pci_slot->number == device) + return AE_OK; + } + + slot = kmalloc(sizeof(*slot), GFP_KERNEL); + if (!slot) + return AE_OK; + + snprintf(name, sizeof(name), "%llu", sun); + pci_slot = pci_create_slot(pci_bus, device, name, NULL); + if (IS_ERR(pci_slot)) { + pr_err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot)); + kfree(slot); + return AE_OK; + } + + slot->pci_slot = pci_slot; + list_add(&slot->list, &slot_list); + + get_device(&pci_bus->dev); + + pr_debug("%p, pci_bus: %x, device: %d, name: %s\n", + pci_slot, pci_bus->number, device, name); + + return AE_OK; +} + +void acpi_pci_slot_enumerate(struct pci_bus *bus) +{ + acpi_handle handle = ACPI_HANDLE(bus->bridge); + + if (handle) { + mutex_lock(&slot_list_lock); + acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, + register_slot, NULL, bus, NULL); + mutex_unlock(&slot_list_lock); + } +} + +void acpi_pci_slot_remove(struct pci_bus *bus) +{ + struct acpi_pci_slot *slot, *tmp; + + mutex_lock(&slot_list_lock); + list_for_each_entry_safe(slot, tmp, &slot_list, list) { + if (slot->pci_slot->bus == bus) { + list_del(&slot->list); + pci_destroy_slot(slot->pci_slot); + put_device(&bus->dev); + kfree(slot); + } + } + mutex_unlock(&slot_list_lock); +} + +static int do_sta_before_sun(const struct dmi_system_id *d) +{ + pr_info("%s detected: will evaluate _STA before calling _SUN\n", + d->ident); + check_sta_before_sun = 1; + return 0; +} + +static const struct dmi_system_id acpi_pci_slot_dmi_table[] __initconst = { + /* + * Fujitsu Primequest machines will return 1023 to indicate an + * error if the _SUN method is evaluated on SxFy objects that + * are not present (as indicated by _STA), so for those machines, + * we want to check _STA before evaluating _SUN. + */ + { + .callback = do_sta_before_sun, + .ident = "Fujitsu PRIMEQUEST", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "FUJITSU LIMITED"), + DMI_MATCH(DMI_BIOS_VERSION, "PRIMEQUEST"), + }, + }, + {} +}; + +void __init acpi_pci_slot_init(void) +{ + dmi_check_system(acpi_pci_slot_dmi_table); +} -- cgit v1.2.3