From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/base/driver.c | 303 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 303 insertions(+) create mode 100644 drivers/base/driver.c (limited to 'drivers/base/driver.c') diff --git a/drivers/base/driver.c b/drivers/base/driver.c new file mode 100644 index 000000000..676b6275d --- /dev/null +++ b/drivers/base/driver.c @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * driver.c - centralized device driver management + * + * Copyright (c) 2002-3 Patrick Mochel + * Copyright (c) 2002-3 Open Source Development Labs + * Copyright (c) 2007 Greg Kroah-Hartman + * Copyright (c) 2007 Novell Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "base.h" + +static struct device *next_device(struct klist_iter *i) +{ + struct klist_node *n = klist_next(i); + struct device *dev = NULL; + struct device_private *dev_prv; + + if (n) { + dev_prv = to_device_private_driver(n); + dev = dev_prv->device; + } + return dev; +} + +/** + * driver_set_override() - Helper to set or clear driver override. + * @dev: Device to change + * @override: Address of string to change (e.g. &device->driver_override); + * The contents will be freed and hold newly allocated override. + * @s: NUL-terminated string, new driver name to force a match, pass empty + * string to clear it ("" or "\n", where the latter is only for sysfs + * interface). + * @len: length of @s + * + * Helper to set or clear driver override in a device, intended for the cases + * when the driver_override field is allocated by driver/bus code. + * + * Returns: 0 on success or a negative error code on failure. + */ +int driver_set_override(struct device *dev, const char **override, + const char *s, size_t len) +{ + const char *new, *old; + char *cp; + + if (!override || !s) + return -EINVAL; + + /* + * The stored value will be used in sysfs show callback (sysfs_emit()), + * which has a length limit of PAGE_SIZE and adds a trailing newline. + * Thus we can store one character less to avoid truncation during sysfs + * show. + */ + if (len >= (PAGE_SIZE - 1)) + return -EINVAL; + + /* + * Compute the real length of the string in case userspace sends us a + * bunch of \0 characters like python likes to do. + */ + len = strlen(s); + + if (!len) { + /* Empty string passed - clear override */ + device_lock(dev); + old = *override; + *override = NULL; + device_unlock(dev); + kfree(old); + + return 0; + } + + cp = strnchr(s, len, '\n'); + if (cp) + len = cp - s; + + new = kstrndup(s, len, GFP_KERNEL); + if (!new) + return -ENOMEM; + + device_lock(dev); + old = *override; + if (cp != s) { + *override = new; + } else { + /* "\n" passed - clear override */ + kfree(new); + *override = NULL; + } + device_unlock(dev); + + kfree(old); + + return 0; +} +EXPORT_SYMBOL_GPL(driver_set_override); + +/** + * driver_for_each_device - Iterator for devices bound to a driver. + * @drv: Driver we're iterating. + * @start: Device to begin with + * @data: Data to pass to the callback. + * @fn: Function to call for each device. + * + * Iterate over the @drv's list of devices calling @fn for each one. + */ +int driver_for_each_device(struct device_driver *drv, struct device *start, + void *data, int (*fn)(struct device *, void *)) +{ + struct klist_iter i; + struct device *dev; + int error = 0; + + if (!drv) + return -EINVAL; + + klist_iter_init_node(&drv->p->klist_devices, &i, + start ? &start->p->knode_driver : NULL); + while (!error && (dev = next_device(&i))) + error = fn(dev, data); + klist_iter_exit(&i); + return error; +} +EXPORT_SYMBOL_GPL(driver_for_each_device); + +/** + * driver_find_device - device iterator for locating a particular device. + * @drv: The device's driver + * @start: Device to begin with + * @data: Data to pass to match function + * @match: Callback function to check device + * + * This is similar to the driver_for_each_device() function above, but + * it returns a reference to a device that is 'found' for later use, as + * determined by the @match callback. + * + * The callback should return 0 if the device doesn't match and non-zero + * if it does. If the callback returns non-zero, this function will + * return to the caller and not iterate over any more devices. + */ +struct device *driver_find_device(struct device_driver *drv, + struct device *start, const void *data, + int (*match)(struct device *dev, const void *data)) +{ + struct klist_iter i; + struct device *dev; + + if (!drv || !drv->p) + return NULL; + + klist_iter_init_node(&drv->p->klist_devices, &i, + (start ? &start->p->knode_driver : NULL)); + while ((dev = next_device(&i))) + if (match(dev, data) && get_device(dev)) + break; + klist_iter_exit(&i); + return dev; +} +EXPORT_SYMBOL_GPL(driver_find_device); + +/** + * driver_create_file - create sysfs file for driver. + * @drv: driver. + * @attr: driver attribute descriptor. + */ +int driver_create_file(struct device_driver *drv, + const struct driver_attribute *attr) +{ + int error; + + if (drv) + error = sysfs_create_file(&drv->p->kobj, &attr->attr); + else + error = -EINVAL; + return error; +} +EXPORT_SYMBOL_GPL(driver_create_file); + +/** + * driver_remove_file - remove sysfs file for driver. + * @drv: driver. + * @attr: driver attribute descriptor. + */ +void driver_remove_file(struct device_driver *drv, + const struct driver_attribute *attr) +{ + if (drv) + sysfs_remove_file(&drv->p->kobj, &attr->attr); +} +EXPORT_SYMBOL_GPL(driver_remove_file); + +int driver_add_groups(struct device_driver *drv, + const struct attribute_group **groups) +{ + return sysfs_create_groups(&drv->p->kobj, groups); +} + +void driver_remove_groups(struct device_driver *drv, + const struct attribute_group **groups) +{ + sysfs_remove_groups(&drv->p->kobj, groups); +} + +/** + * driver_register - register driver with bus + * @drv: driver to register + * + * We pass off most of the work to the bus_add_driver() call, + * since most of the things we have to do deal with the bus + * structures. + */ +int driver_register(struct device_driver *drv) +{ + int ret; + struct device_driver *other; + + if (!drv->bus->p) { + pr_err("Driver '%s' was unable to register with bus_type '%s' because the bus was not initialized.\n", + drv->name, drv->bus->name); + return -EINVAL; + } + + if ((drv->bus->probe && drv->probe) || + (drv->bus->remove && drv->remove) || + (drv->bus->shutdown && drv->shutdown)) + pr_warn("Driver '%s' needs updating - please use " + "bus_type methods\n", drv->name); + + other = driver_find(drv->name, drv->bus); + if (other) { + pr_err("Error: Driver '%s' is already registered, " + "aborting...\n", drv->name); + return -EBUSY; + } + + ret = bus_add_driver(drv); + if (ret) + return ret; + ret = driver_add_groups(drv, drv->groups); + if (ret) { + bus_remove_driver(drv); + return ret; + } + kobject_uevent(&drv->p->kobj, KOBJ_ADD); + deferred_probe_extend_timeout(); + + return ret; +} +EXPORT_SYMBOL_GPL(driver_register); + +/** + * driver_unregister - remove driver from system. + * @drv: driver. + * + * Again, we pass off most of the work to the bus-level call. + */ +void driver_unregister(struct device_driver *drv) +{ + if (!drv || !drv->p) { + WARN(1, "Unexpected driver unregister!\n"); + return; + } + driver_remove_groups(drv, drv->groups); + bus_remove_driver(drv); +} +EXPORT_SYMBOL_GPL(driver_unregister); + +/** + * driver_find - locate driver on a bus by its name. + * @name: name of the driver. + * @bus: bus to scan for the driver. + * + * Call kset_find_obj() to iterate over list of drivers on + * a bus to find driver by name. Return driver if found. + * + * This routine provides no locking to prevent the driver it returns + * from being unregistered or unloaded while the caller is using it. + * The caller is responsible for preventing this. + */ +struct device_driver *driver_find(const char *name, struct bus_type *bus) +{ + struct kobject *k = kset_find_obj(bus->p->drivers_kset, name); + struct driver_private *priv; + + if (k) { + /* Drop reference added by kset_find_obj() */ + kobject_put(k); + priv = to_driver(k); + return priv->driver; + } + return NULL; +} +EXPORT_SYMBOL_GPL(driver_find); -- cgit v1.2.3