From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/base/firmware_loader/sysfs.c | 419 +++++++++++++++++++++++++++++++++++ 1 file changed, 419 insertions(+) create mode 100644 drivers/base/firmware_loader/sysfs.c (limited to 'drivers/base/firmware_loader/sysfs.c') diff --git a/drivers/base/firmware_loader/sysfs.c b/drivers/base/firmware_loader/sysfs.c new file mode 100644 index 000000000..56911d75b --- /dev/null +++ b/drivers/base/firmware_loader/sysfs.c @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include +#include +#include +#include + +#include "sysfs.h" + +/* + * sysfs support for firmware loader + */ + +void __fw_load_abort(struct fw_priv *fw_priv) +{ + /* + * There is a small window in which user can write to 'loading' + * between loading done/aborted and disappearance of 'loading' + */ + if (fw_state_is_aborted(fw_priv) || fw_state_is_done(fw_priv)) + return; + + fw_state_aborted(fw_priv); +} + +#ifdef CONFIG_FW_LOADER_USER_HELPER +static ssize_t timeout_show(struct class *class, struct class_attribute *attr, + char *buf) +{ + return sysfs_emit(buf, "%d\n", __firmware_loading_timeout()); +} + +/** + * timeout_store() - set number of seconds to wait for firmware + * @class: device class pointer + * @attr: device attribute pointer + * @buf: buffer to scan for timeout value + * @count: number of bytes in @buf + * + * Sets the number of seconds to wait for the firmware. Once + * this expires an error will be returned to the driver and no + * firmware will be provided. + * + * Note: zero means 'wait forever'. + **/ +static ssize_t timeout_store(struct class *class, struct class_attribute *attr, + const char *buf, size_t count) +{ + int tmp_loading_timeout = simple_strtol(buf, NULL, 10); + + if (tmp_loading_timeout < 0) + tmp_loading_timeout = 0; + + __fw_fallback_set_timeout(tmp_loading_timeout); + + return count; +} +static CLASS_ATTR_RW(timeout); + +static struct attribute *firmware_class_attrs[] = { + &class_attr_timeout.attr, + NULL, +}; +ATTRIBUTE_GROUPS(firmware_class); + +static int do_firmware_uevent(const struct fw_sysfs *fw_sysfs, struct kobj_uevent_env *env) +{ + if (add_uevent_var(env, "FIRMWARE=%s", fw_sysfs->fw_priv->fw_name)) + return -ENOMEM; + if (add_uevent_var(env, "TIMEOUT=%i", __firmware_loading_timeout())) + return -ENOMEM; + if (add_uevent_var(env, "ASYNC=%d", fw_sysfs->nowait)) + return -ENOMEM; + + return 0; +} + +static int firmware_uevent(const struct device *dev, struct kobj_uevent_env *env) +{ + const struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); + int err = 0; + + mutex_lock(&fw_lock); + if (fw_sysfs->fw_priv) + err = do_firmware_uevent(fw_sysfs, env); + mutex_unlock(&fw_lock); + return err; +} +#endif /* CONFIG_FW_LOADER_USER_HELPER */ + +static void fw_dev_release(struct device *dev) +{ + struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); + + if (fw_sysfs->fw_upload_priv) + fw_upload_free(fw_sysfs); + + kfree(fw_sysfs); +} + +static struct class firmware_class = { + .name = "firmware", +#ifdef CONFIG_FW_LOADER_USER_HELPER + .class_groups = firmware_class_groups, + .dev_uevent = firmware_uevent, +#endif + .dev_release = fw_dev_release, +}; + +int register_sysfs_loader(void) +{ + int ret = class_register(&firmware_class); + + if (ret != 0) + return ret; + return register_firmware_config_sysctl(); +} + +void unregister_sysfs_loader(void) +{ + unregister_firmware_config_sysctl(); + class_unregister(&firmware_class); +} + +static ssize_t firmware_loading_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); + int loading = 0; + + mutex_lock(&fw_lock); + if (fw_sysfs->fw_priv) + loading = fw_state_is_loading(fw_sysfs->fw_priv); + mutex_unlock(&fw_lock); + + return sysfs_emit(buf, "%d\n", loading); +} + +/** + * firmware_loading_store() - set value in the 'loading' control file + * @dev: device pointer + * @attr: device attribute pointer + * @buf: buffer to scan for loading control value + * @count: number of bytes in @buf + * + * The relevant values are: + * + * 1: Start a load, discarding any previous partial load. + * 0: Conclude the load and hand the data to the driver code. + * -1: Conclude the load with an error and discard any written data. + **/ +static ssize_t firmware_loading_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); + struct fw_priv *fw_priv; + ssize_t written = count; + int loading = simple_strtol(buf, NULL, 10); + + mutex_lock(&fw_lock); + fw_priv = fw_sysfs->fw_priv; + if (fw_state_is_aborted(fw_priv) || fw_state_is_done(fw_priv)) + goto out; + + switch (loading) { + case 1: + /* discarding any previous partial load */ + fw_free_paged_buf(fw_priv); + fw_state_start(fw_priv); + break; + case 0: + if (fw_state_is_loading(fw_priv)) { + int rc; + + /* + * Several loading requests may be pending on + * one same firmware buf, so let all requests + * see the mapped 'buf->data' once the loading + * is completed. + */ + rc = fw_map_paged_buf(fw_priv); + if (rc) + dev_err(dev, "%s: map pages failed\n", + __func__); + else + rc = security_kernel_post_load_data(fw_priv->data, + fw_priv->size, + LOADING_FIRMWARE, + "blob"); + + /* + * Same logic as fw_load_abort, only the DONE bit + * is ignored and we set ABORT only on failure. + */ + if (rc) { + fw_state_aborted(fw_priv); + written = rc; + } else { + fw_state_done(fw_priv); + + /* + * If this is a user-initiated firmware upload + * then start the upload in a worker thread now. + */ + rc = fw_upload_start(fw_sysfs); + if (rc) + written = rc; + } + break; + } + fallthrough; + default: + dev_err(dev, "%s: unexpected value (%d)\n", __func__, loading); + fallthrough; + case -1: + fw_load_abort(fw_sysfs); + if (fw_sysfs->fw_upload_priv) + fw_state_init(fw_sysfs->fw_priv); + + break; + } +out: + mutex_unlock(&fw_lock); + return written; +} + +DEVICE_ATTR(loading, 0644, firmware_loading_show, firmware_loading_store); + +static void firmware_rw_data(struct fw_priv *fw_priv, char *buffer, + loff_t offset, size_t count, bool read) +{ + if (read) + memcpy(buffer, fw_priv->data + offset, count); + else + memcpy(fw_priv->data + offset, buffer, count); +} + +static void firmware_rw(struct fw_priv *fw_priv, char *buffer, + loff_t offset, size_t count, bool read) +{ + while (count) { + int page_nr = offset >> PAGE_SHIFT; + int page_ofs = offset & (PAGE_SIZE - 1); + int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count); + + if (read) + memcpy_from_page(buffer, fw_priv->pages[page_nr], + page_ofs, page_cnt); + else + memcpy_to_page(fw_priv->pages[page_nr], page_ofs, + buffer, page_cnt); + + buffer += page_cnt; + offset += page_cnt; + count -= page_cnt; + } +} + +static ssize_t firmware_data_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buffer, loff_t offset, size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); + struct fw_priv *fw_priv; + ssize_t ret_count; + + mutex_lock(&fw_lock); + fw_priv = fw_sysfs->fw_priv; + if (!fw_priv || fw_state_is_done(fw_priv)) { + ret_count = -ENODEV; + goto out; + } + if (offset > fw_priv->size) { + ret_count = 0; + goto out; + } + if (count > fw_priv->size - offset) + count = fw_priv->size - offset; + + ret_count = count; + + if (fw_priv->data) + firmware_rw_data(fw_priv, buffer, offset, count, true); + else + firmware_rw(fw_priv, buffer, offset, count, true); + +out: + mutex_unlock(&fw_lock); + return ret_count; +} + +static int fw_realloc_pages(struct fw_sysfs *fw_sysfs, int min_size) +{ + int err; + + err = fw_grow_paged_buf(fw_sysfs->fw_priv, + PAGE_ALIGN(min_size) >> PAGE_SHIFT); + if (err) + fw_load_abort(fw_sysfs); + return err; +} + +/** + * firmware_data_write() - write method for firmware + * @filp: open sysfs file + * @kobj: kobject for the device + * @bin_attr: bin_attr structure + * @buffer: buffer being written + * @offset: buffer offset for write in total data store area + * @count: buffer size + * + * Data written to the 'data' attribute will be later handed to + * the driver as a firmware image. + **/ +static ssize_t firmware_data_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buffer, loff_t offset, size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev); + struct fw_priv *fw_priv; + ssize_t retval; + + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + + mutex_lock(&fw_lock); + fw_priv = fw_sysfs->fw_priv; + if (!fw_priv || fw_state_is_done(fw_priv)) { + retval = -ENODEV; + goto out; + } + + if (fw_priv->data) { + if (offset + count > fw_priv->allocated_size) { + retval = -ENOMEM; + goto out; + } + firmware_rw_data(fw_priv, buffer, offset, count, false); + retval = count; + } else { + retval = fw_realloc_pages(fw_sysfs, offset + count); + if (retval) + goto out; + + retval = count; + firmware_rw(fw_priv, buffer, offset, count, false); + } + + fw_priv->size = max_t(size_t, offset + count, fw_priv->size); +out: + mutex_unlock(&fw_lock); + return retval; +} + +static struct bin_attribute firmware_attr_data = { + .attr = { .name = "data", .mode = 0644 }, + .size = 0, + .read = firmware_data_read, + .write = firmware_data_write, +}; + +static struct attribute *fw_dev_attrs[] = { + &dev_attr_loading.attr, +#ifdef CONFIG_FW_UPLOAD + &dev_attr_cancel.attr, + &dev_attr_status.attr, + &dev_attr_error.attr, + &dev_attr_remaining_size.attr, +#endif + NULL +}; + +static struct bin_attribute *fw_dev_bin_attrs[] = { + &firmware_attr_data, + NULL +}; + +static const struct attribute_group fw_dev_attr_group = { + .attrs = fw_dev_attrs, + .bin_attrs = fw_dev_bin_attrs, +#ifdef CONFIG_FW_UPLOAD + .is_visible = fw_upload_is_visible, +#endif +}; + +static const struct attribute_group *fw_dev_attr_groups[] = { + &fw_dev_attr_group, + NULL +}; + +struct fw_sysfs * +fw_create_instance(struct firmware *firmware, const char *fw_name, + struct device *device, u32 opt_flags) +{ + struct fw_sysfs *fw_sysfs; + struct device *f_dev; + + fw_sysfs = kzalloc(sizeof(*fw_sysfs), GFP_KERNEL); + if (!fw_sysfs) { + fw_sysfs = ERR_PTR(-ENOMEM); + goto exit; + } + + fw_sysfs->nowait = !!(opt_flags & FW_OPT_NOWAIT); + fw_sysfs->fw = firmware; + f_dev = &fw_sysfs->dev; + + device_initialize(f_dev); + dev_set_name(f_dev, "%s", fw_name); + f_dev->parent = device; + f_dev->class = &firmware_class; + f_dev->groups = fw_dev_attr_groups; +exit: + return fw_sysfs; +} -- cgit v1.2.3