From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/base/power/common.c | 230 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 230 insertions(+) create mode 100644 drivers/base/power/common.c (limited to 'drivers/base/power/common.c') diff --git a/drivers/base/power/common.c b/drivers/base/power/common.c new file mode 100644 index 000000000..72115917e --- /dev/null +++ b/drivers/base/power/common.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * drivers/base/power/common.c - Common device power management code. + * + * Copyright (C) 2011 Rafael J. Wysocki , Renesas Electronics Corp. + */ +#include +#include +#include +#include +#include +#include +#include + +#include "power.h" + +/** + * dev_pm_get_subsys_data - Create or refcount power.subsys_data for device. + * @dev: Device to handle. + * + * If power.subsys_data is NULL, point it to a new object, otherwise increment + * its reference counter. Return 0 if new object has been created or refcount + * increased, otherwise negative error code. + */ +int dev_pm_get_subsys_data(struct device *dev) +{ + struct pm_subsys_data *psd; + + psd = kzalloc(sizeof(*psd), GFP_KERNEL); + if (!psd) + return -ENOMEM; + + spin_lock_irq(&dev->power.lock); + + if (dev->power.subsys_data) { + dev->power.subsys_data->refcount++; + } else { + spin_lock_init(&psd->lock); + psd->refcount = 1; + dev->power.subsys_data = psd; + pm_clk_init(dev); + psd = NULL; + } + + spin_unlock_irq(&dev->power.lock); + + /* kfree() verifies that its argument is nonzero. */ + kfree(psd); + + return 0; +} +EXPORT_SYMBOL_GPL(dev_pm_get_subsys_data); + +/** + * dev_pm_put_subsys_data - Drop reference to power.subsys_data. + * @dev: Device to handle. + * + * If the reference counter of power.subsys_data is zero after dropping the + * reference, power.subsys_data is removed. + */ +void dev_pm_put_subsys_data(struct device *dev) +{ + struct pm_subsys_data *psd; + + spin_lock_irq(&dev->power.lock); + + psd = dev_to_psd(dev); + if (!psd) + goto out; + + if (--psd->refcount == 0) + dev->power.subsys_data = NULL; + else + psd = NULL; + + out: + spin_unlock_irq(&dev->power.lock); + kfree(psd); +} +EXPORT_SYMBOL_GPL(dev_pm_put_subsys_data); + +/** + * dev_pm_domain_attach - Attach a device to its PM domain. + * @dev: Device to attach. + * @power_on: Used to indicate whether we should power on the device. + * + * The @dev may only be attached to a single PM domain. By iterating through + * the available alternatives we try to find a valid PM domain for the device. + * As attachment succeeds, the ->detach() callback in the struct dev_pm_domain + * should be assigned by the corresponding attach function. + * + * This function should typically be invoked from subsystem level code during + * the probe phase. Especially for those that holds devices which requires + * power management through PM domains. + * + * Callers must ensure proper synchronization of this function with power + * management callbacks. + * + * Returns 0 on successfully attached PM domain, or when it is found that the + * device doesn't need a PM domain, else a negative error code. + */ +int dev_pm_domain_attach(struct device *dev, bool power_on) +{ + int ret; + + if (dev->pm_domain) + return 0; + + ret = acpi_dev_pm_attach(dev, power_on); + if (!ret) + ret = genpd_dev_pm_attach(dev); + + return ret < 0 ? ret : 0; +} +EXPORT_SYMBOL_GPL(dev_pm_domain_attach); + +/** + * dev_pm_domain_attach_by_id - Associate a device with one of its PM domains. + * @dev: The device used to lookup the PM domain. + * @index: The index of the PM domain. + * + * As @dev may only be attached to a single PM domain, the backend PM domain + * provider creates a virtual device to attach instead. If attachment succeeds, + * the ->detach() callback in the struct dev_pm_domain are assigned by the + * corresponding backend attach function, as to deal with detaching of the + * created virtual device. + * + * This function should typically be invoked by a driver during the probe phase, + * in case its device requires power management through multiple PM domains. The + * driver may benefit from using the received device, to configure device-links + * towards its original device. Depending on the use-case and if needed, the + * links may be dynamically changed by the driver, which allows it to control + * the power to the PM domains independently from each other. + * + * Callers must ensure proper synchronization of this function with power + * management callbacks. + * + * Returns the virtual created device when successfully attached to its PM + * domain, NULL in case @dev don't need a PM domain, else an ERR_PTR(). + * Note that, to detach the returned virtual device, the driver shall call + * dev_pm_domain_detach() on it, typically during the remove phase. + */ +struct device *dev_pm_domain_attach_by_id(struct device *dev, + unsigned int index) +{ + if (dev->pm_domain) + return ERR_PTR(-EEXIST); + + return genpd_dev_pm_attach_by_id(dev, index); +} +EXPORT_SYMBOL_GPL(dev_pm_domain_attach_by_id); + +/** + * dev_pm_domain_attach_by_name - Associate a device with one of its PM domains. + * @dev: The device used to lookup the PM domain. + * @name: The name of the PM domain. + * + * For a detailed function description, see dev_pm_domain_attach_by_id(). + */ +struct device *dev_pm_domain_attach_by_name(struct device *dev, + const char *name) +{ + if (dev->pm_domain) + return ERR_PTR(-EEXIST); + + return genpd_dev_pm_attach_by_name(dev, name); +} +EXPORT_SYMBOL_GPL(dev_pm_domain_attach_by_name); + +/** + * dev_pm_domain_detach - Detach a device from its PM domain. + * @dev: Device to detach. + * @power_off: Used to indicate whether we should power off the device. + * + * This functions will reverse the actions from dev_pm_domain_attach(), + * dev_pm_domain_attach_by_id() and dev_pm_domain_attach_by_name(), thus it + * detaches @dev from its PM domain. Typically it should be invoked during the + * remove phase, either from subsystem level code or from drivers. + * + * Callers must ensure proper synchronization of this function with power + * management callbacks. + */ +void dev_pm_domain_detach(struct device *dev, bool power_off) +{ + if (dev->pm_domain && dev->pm_domain->detach) + dev->pm_domain->detach(dev, power_off); +} +EXPORT_SYMBOL_GPL(dev_pm_domain_detach); + +/** + * dev_pm_domain_start - Start the device through its PM domain. + * @dev: Device to start. + * + * This function should typically be called during probe by a subsystem/driver, + * when it needs to start its device from the PM domain's perspective. Note + * that, it's assumed that the PM domain is already powered on when this + * function is called. + * + * Returns 0 on success and negative error values on failures. + */ +int dev_pm_domain_start(struct device *dev) +{ + if (dev->pm_domain && dev->pm_domain->start) + return dev->pm_domain->start(dev); + + return 0; +} +EXPORT_SYMBOL_GPL(dev_pm_domain_start); + +/** + * dev_pm_domain_set - Set PM domain of a device. + * @dev: Device whose PM domain is to be set. + * @pd: PM domain to be set, or NULL. + * + * Sets the PM domain the device belongs to. The PM domain of a device needs + * to be set before its probe finishes (it's bound to a driver). + * + * This function must be called with the device lock held. + */ +void dev_pm_domain_set(struct device *dev, struct dev_pm_domain *pd) +{ + if (dev->pm_domain == pd) + return; + + WARN(pd && device_is_bound(dev), + "PM domains can only be changed for unbound devices\n"); + dev->pm_domain = pd; + device_pm_check_callbacks(dev); +} +EXPORT_SYMBOL_GPL(dev_pm_domain_set); -- cgit v1.2.3