From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/bcma/driver_mips.c | 360 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 360 insertions(+) create mode 100644 drivers/bcma/driver_mips.c (limited to 'drivers/bcma/driver_mips.c') diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c new file mode 100644 index 000000000..4f01e6b17 --- /dev/null +++ b/drivers/bcma/driver_mips.c @@ -0,0 +1,360 @@ +/* + * Broadcom specific AMBA + * Broadcom MIPS32 74K core driver + * + * Copyright 2009, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch + * Copyright 2010, Bernhard Loos + * Copyright 2011, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" + +#include + +#include +#include +#include +#include +#ifdef CONFIG_BCM47XX +#include +#endif + +enum bcma_boot_dev { + BCMA_BOOT_DEV_UNK = 0, + BCMA_BOOT_DEV_ROM, + BCMA_BOOT_DEV_PARALLEL, + BCMA_BOOT_DEV_SERIAL, + BCMA_BOOT_DEV_NAND, +}; + +/* The 47162a0 hangs when reading MIPS DMP registers */ +static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) +{ + return dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM47162 && + dev->bus->chipinfo.rev == 0 && dev->id.id == BCMA_CORE_MIPS_74K; +} + +/* The 5357b0 hangs when reading USB20H DMP registers */ +static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) +{ + return (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 || + dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) && + dev->bus->chipinfo.pkg == 11 && + dev->id.id == BCMA_CORE_USB20_HOST; +} + +static inline u32 mips_read32(struct bcma_drv_mips *mcore, + u16 offset) +{ + return bcma_read32(mcore->core, offset); +} + +static u32 bcma_core_mips_irqflag(struct bcma_device *dev) +{ + u32 flag; + + if (bcma_core_mips_bcm47162a0_quirk(dev)) + return dev->core_index; + if (bcma_core_mips_bcm5357b0_quirk(dev)) + return dev->core_index; + flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); + + if (flag) + return flag & 0x1F; + else + return 0x3f; +} + +/* Get the MIPS IRQ assignment for a specified device. + * If unassigned, 0 is returned. + * If disabled, 5 is returned. + * If not supported, 6 is returned. + */ +unsigned int bcma_core_mips_irq(struct bcma_device *dev) +{ + struct bcma_device *mdev = dev->bus->drv_mips.core; + u32 irqflag; + unsigned int irq; + + irqflag = bcma_core_mips_irqflag(dev); + if (irqflag == 0x3f) + return 6; + + for (irq = 0; irq <= 4; irq++) + if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & + (1 << irqflag)) + return irq; + + return 5; +} + +static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) +{ + unsigned int oldirq = bcma_core_mips_irq(dev); + struct bcma_bus *bus = dev->bus; + struct bcma_device *mdev = bus->drv_mips.core; + u32 irqflag; + + irqflag = bcma_core_mips_irqflag(dev); + BUG_ON(oldirq == 6); + + dev->irq = irq + 2; + + /* clear the old irq */ + if (oldirq == 0) + bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), + bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & + ~(1 << irqflag)); + else if (oldirq != 5) + bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0); + + /* assign the new one */ + if (irq == 0) { + bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), + bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | + (1 << irqflag)); + } else { + u32 irqinitmask = bcma_read32(mdev, + BCMA_MIPS_MIPS74K_INTMASK(irq)); + if (irqinitmask) { + struct bcma_device *core; + + /* backplane irq line is in use, find out who uses + * it and set user to irq 0 + */ + list_for_each_entry(core, &bus->cores, list) { + if ((1 << bcma_core_mips_irqflag(core)) == + irqinitmask) { + bcma_core_mips_set_irq(core, 0); + break; + } + } + } + bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), + 1 << irqflag); + } + + bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n", + dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2); +} + +static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, + u16 coreid, u8 unit) +{ + struct bcma_device *core; + + core = bcma_find_core_unit(bus, coreid, unit); + if (!core) { + bcma_warn(bus, + "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n", + coreid, unit); + return; + } + + bcma_core_mips_set_irq(core, irq); +} + +static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) +{ + int i; + static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; + char interrupts[25]; + char *ints = interrupts; + + for (i = 0; i < ARRAY_SIZE(irq_name); i++) + ints += sprintf(ints, " %s%c", + irq_name[i], i == irq ? '*' : ' '); + + bcma_debug(dev->bus, "core 0x%04x, irq:%s\n", dev->id.id, interrupts); +} + +static void bcma_core_mips_dump_irq(struct bcma_bus *bus) +{ + struct bcma_device *core; + + list_for_each_entry(core, &bus->cores, list) { + bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); + } +} + +u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) +{ + struct bcma_bus *bus = mcore->core->bus; + + if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) + return bcma_pmu_get_cpu_clock(&bus->drv_cc); + + bcma_err(bus, "No PMU available, need this to get the cpu clock\n"); + return 0; +} +EXPORT_SYMBOL(bcma_cpu_clock); + +static enum bcma_boot_dev bcma_boot_dev(struct bcma_bus *bus) +{ + struct bcma_drv_cc *cc = &bus->drv_cc; + u8 cc_rev = cc->core->id.rev; + + if (cc_rev == 42) { + struct bcma_device *core; + + core = bcma_find_core(bus, BCMA_CORE_NS_ROM); + if (core) { + switch (bcma_aread32(core, BCMA_IOST) & + BCMA_NS_ROM_IOST_BOOT_DEV_MASK) { + case BCMA_NS_ROM_IOST_BOOT_DEV_NOR: + return BCMA_BOOT_DEV_SERIAL; + case BCMA_NS_ROM_IOST_BOOT_DEV_NAND: + return BCMA_BOOT_DEV_NAND; + case BCMA_NS_ROM_IOST_BOOT_DEV_ROM: + default: + return BCMA_BOOT_DEV_ROM; + } + } + } else { + if (cc_rev == 38) { + if (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT) + return BCMA_BOOT_DEV_NAND; + else if (cc->status & BIT(5)) + return BCMA_BOOT_DEV_ROM; + } + + if ((cc->capabilities & BCMA_CC_CAP_FLASHT) == + BCMA_CC_FLASHT_PARA) + return BCMA_BOOT_DEV_PARALLEL; + else + return BCMA_BOOT_DEV_SERIAL; + } + + return BCMA_BOOT_DEV_SERIAL; +} + +static void bcma_core_mips_nvram_init(struct bcma_drv_mips *mcore) +{ + struct bcma_bus *bus = mcore->core->bus; + enum bcma_boot_dev boot_dev; + + /* Determine flash type this SoC boots from */ + boot_dev = bcma_boot_dev(bus); + switch (boot_dev) { + case BCMA_BOOT_DEV_PARALLEL: + case BCMA_BOOT_DEV_SERIAL: +#ifdef CONFIG_BCM47XX + bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH2, + BCMA_SOC_FLASH2_SZ); +#endif + break; + case BCMA_BOOT_DEV_NAND: +#ifdef CONFIG_BCM47XX + bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH1, + BCMA_SOC_FLASH1_SZ); +#endif + break; + default: + break; + } +} + +void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) +{ + struct bcma_bus *bus = mcore->core->bus; + + if (mcore->early_setup_done) + return; + + bcma_chipco_serial_init(&bus->drv_cc); + bcma_core_mips_nvram_init(mcore); + + mcore->early_setup_done = true; +} + +static void bcma_fix_i2s_irqflag(struct bcma_bus *bus) +{ + struct bcma_device *cpu, *pcie, *i2s; + + /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK) + * (IRQ flags > 7 are ignored when setting the interrupt masks) + */ + if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 && + bus->chipinfo.id != BCMA_CHIP_ID_BCM4748) + return; + + cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K); + pcie = bcma_find_core(bus, BCMA_CORE_PCIE); + i2s = bcma_find_core(bus, BCMA_CORE_I2S); + if (cpu && pcie && i2s && + bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 && + bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 && + bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) { + bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504); + bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504); + bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87); + bcma_debug(bus, + "Moved i2s interrupt to oob line 7 instead of 8\n"); + } +} + +void bcma_core_mips_init(struct bcma_drv_mips *mcore) +{ + struct bcma_bus *bus; + struct bcma_device *core; + bus = mcore->core->bus; + + if (mcore->setup_done) + return; + + bcma_debug(bus, "Initializing MIPS core...\n"); + + bcma_core_mips_early_init(mcore); + + bcma_fix_i2s_irqflag(bus); + + switch (bus->chipinfo.id) { + case BCMA_CHIP_ID_BCM4716: + case BCMA_CHIP_ID_BCM4748: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); + bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); + bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); + break; + case BCMA_CHIP_ID_BCM5356: + case BCMA_CHIP_ID_BCM47162: + case BCMA_CHIP_ID_BCM53572: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); + break; + case BCMA_CHIP_ID_BCM5357: + case BCMA_CHIP_ID_BCM4749: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); + bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); + break; + case BCMA_CHIP_ID_BCM4706: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT, + 0); + bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1); + bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON, + 0); + break; + default: + list_for_each_entry(core, &bus->cores, list) { + core->irq = bcma_core_irq(core, 0); + } + bcma_err(bus, + "Unknown device (0x%x) found, can not configure IRQs\n", + bus->chipinfo.id); + } + bcma_debug(bus, "IRQ reconfiguration done\n"); + bcma_core_mips_dump_irq(bus); + + mcore->setup_done = true; +} -- cgit v1.2.3