From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/bluetooth/bluecard_cs.c | 908 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 908 insertions(+) create mode 100644 drivers/bluetooth/bluecard_cs.c (limited to 'drivers/bluetooth/bluecard_cs.c') diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c new file mode 100644 index 000000000..36eabf617 --- /dev/null +++ b/drivers/bluetooth/bluecard_cs.c @@ -0,0 +1,908 @@ +/* + * + * Bluetooth driver for the Anycom BlueCard (LSE039/LSE041) + * + * Copyright (C) 2001-2002 Marcel Holtmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * . Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include +#include + + + +/* ======================== Module parameters ======================== */ + + +MODULE_AUTHOR("Marcel Holtmann "); +MODULE_DESCRIPTION("Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)"); +MODULE_LICENSE("GPL"); + + + +/* ======================== Local structures ======================== */ + + +struct bluecard_info { + struct pcmcia_device *p_dev; + + struct hci_dev *hdev; + + spinlock_t lock; /* For serializing operations */ + struct timer_list timer; /* For LED control */ + + struct sk_buff_head txq; + unsigned long tx_state; + + unsigned long rx_state; + unsigned long rx_count; + struct sk_buff *rx_skb; + + unsigned char ctrl_reg; + unsigned long hw_state; /* Status of the hardware and LED control */ +}; + + +static int bluecard_config(struct pcmcia_device *link); +static void bluecard_release(struct pcmcia_device *link); + +static void bluecard_detach(struct pcmcia_device *p_dev); + + +/* Default baud rate: 57600, 115200, 230400 or 460800 */ +#define DEFAULT_BAUD_RATE 230400 + + +/* Hardware states */ +#define CARD_READY 1 +#define CARD_ACTIVITY 2 +#define CARD_HAS_PCCARD_ID 4 +#define CARD_HAS_POWER_LED 5 +#define CARD_HAS_ACTIVITY_LED 6 + +/* Transmit states */ +#define XMIT_SENDING 1 +#define XMIT_WAKEUP 2 +#define XMIT_BUFFER_NUMBER 5 /* unset = buffer one, set = buffer two */ +#define XMIT_BUF_ONE_READY 6 +#define XMIT_BUF_TWO_READY 7 +#define XMIT_SENDING_READY 8 + +/* Receiver states */ +#define RECV_WAIT_PACKET_TYPE 0 +#define RECV_WAIT_EVENT_HEADER 1 +#define RECV_WAIT_ACL_HEADER 2 +#define RECV_WAIT_SCO_HEADER 3 +#define RECV_WAIT_DATA 4 + +/* Special packet types */ +#define PKT_BAUD_RATE_57600 0x80 +#define PKT_BAUD_RATE_115200 0x81 +#define PKT_BAUD_RATE_230400 0x82 +#define PKT_BAUD_RATE_460800 0x83 + + +/* These are the register offsets */ +#define REG_COMMAND 0x20 +#define REG_INTERRUPT 0x21 +#define REG_CONTROL 0x22 +#define REG_RX_CONTROL 0x24 +#define REG_CARD_RESET 0x30 +#define REG_LED_CTRL 0x30 + +/* REG_COMMAND */ +#define REG_COMMAND_TX_BUF_ONE 0x01 +#define REG_COMMAND_TX_BUF_TWO 0x02 +#define REG_COMMAND_RX_BUF_ONE 0x04 +#define REG_COMMAND_RX_BUF_TWO 0x08 +#define REG_COMMAND_RX_WIN_ONE 0x00 +#define REG_COMMAND_RX_WIN_TWO 0x10 + +/* REG_CONTROL */ +#define REG_CONTROL_BAUD_RATE_57600 0x00 +#define REG_CONTROL_BAUD_RATE_115200 0x01 +#define REG_CONTROL_BAUD_RATE_230400 0x02 +#define REG_CONTROL_BAUD_RATE_460800 0x03 +#define REG_CONTROL_RTS 0x04 +#define REG_CONTROL_BT_ON 0x08 +#define REG_CONTROL_BT_RESET 0x10 +#define REG_CONTROL_BT_RES_PU 0x20 +#define REG_CONTROL_INTERRUPT 0x40 +#define REG_CONTROL_CARD_RESET 0x80 + +/* REG_RX_CONTROL */ +#define RTS_LEVEL_SHIFT_BITS 0x02 + + + +/* ======================== LED handling routines ======================== */ + + +static void bluecard_activity_led_timeout(struct timer_list *t) +{ + struct bluecard_info *info = from_timer(info, t, timer); + unsigned int iobase = info->p_dev->resource[0]->start; + + if (test_bit(CARD_ACTIVITY, &(info->hw_state))) { + /* leave LED in inactive state for HZ/10 for blink effect */ + clear_bit(CARD_ACTIVITY, &(info->hw_state)); + mod_timer(&(info->timer), jiffies + HZ / 10); + } + + /* Disable activity LED, enable power LED */ + outb(0x08 | 0x20, iobase + 0x30); +} + + +static void bluecard_enable_activity_led(struct bluecard_info *info) +{ + unsigned int iobase = info->p_dev->resource[0]->start; + + /* don't disturb running blink timer */ + if (timer_pending(&(info->timer))) + return; + + set_bit(CARD_ACTIVITY, &(info->hw_state)); + + if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) { + /* Enable activity LED, keep power LED enabled */ + outb(0x18 | 0x60, iobase + 0x30); + } else { + /* Disable power LED */ + outb(0x00, iobase + 0x30); + } + + /* Stop the LED after HZ/10 */ + mod_timer(&(info->timer), jiffies + HZ / 10); +} + + + +/* ======================== Interrupt handling ======================== */ + + +static int bluecard_write(unsigned int iobase, unsigned int offset, __u8 *buf, int len) +{ + int i, actual; + + actual = (len > 15) ? 15 : len; + + outb_p(actual, iobase + offset); + + for (i = 0; i < actual; i++) + outb_p(buf[i], iobase + offset + i + 1); + + return actual; +} + + +static void bluecard_write_wakeup(struct bluecard_info *info) +{ + if (!info) { + BT_ERR("Unknown device"); + return; + } + + if (!test_bit(XMIT_SENDING_READY, &(info->tx_state))) + return; + + if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) { + set_bit(XMIT_WAKEUP, &(info->tx_state)); + return; + } + + do { + unsigned int iobase = info->p_dev->resource[0]->start; + unsigned int offset; + unsigned char command; + unsigned long ready_bit; + register struct sk_buff *skb; + int len; + + clear_bit(XMIT_WAKEUP, &(info->tx_state)); + + if (!pcmcia_dev_present(info->p_dev)) + return; + + if (test_bit(XMIT_BUFFER_NUMBER, &(info->tx_state))) { + if (!test_bit(XMIT_BUF_TWO_READY, &(info->tx_state))) + break; + offset = 0x10; + command = REG_COMMAND_TX_BUF_TWO; + ready_bit = XMIT_BUF_TWO_READY; + } else { + if (!test_bit(XMIT_BUF_ONE_READY, &(info->tx_state))) + break; + offset = 0x00; + command = REG_COMMAND_TX_BUF_ONE; + ready_bit = XMIT_BUF_ONE_READY; + } + + skb = skb_dequeue(&(info->txq)); + if (!skb) + break; + + if (hci_skb_pkt_type(skb) & 0x80) { + /* Disable RTS */ + info->ctrl_reg |= REG_CONTROL_RTS; + outb(info->ctrl_reg, iobase + REG_CONTROL); + } + + /* Activate LED */ + bluecard_enable_activity_led(info); + + /* Send frame */ + len = bluecard_write(iobase, offset, skb->data, skb->len); + + /* Tell the FPGA to send the data */ + outb_p(command, iobase + REG_COMMAND); + + /* Mark the buffer as dirty */ + clear_bit(ready_bit, &(info->tx_state)); + + if (hci_skb_pkt_type(skb) & 0x80) { + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wq); + DEFINE_WAIT(wait); + + unsigned char baud_reg; + + switch (hci_skb_pkt_type(skb)) { + case PKT_BAUD_RATE_460800: + baud_reg = REG_CONTROL_BAUD_RATE_460800; + break; + case PKT_BAUD_RATE_230400: + baud_reg = REG_CONTROL_BAUD_RATE_230400; + break; + case PKT_BAUD_RATE_115200: + baud_reg = REG_CONTROL_BAUD_RATE_115200; + break; + case PKT_BAUD_RATE_57600: + default: + baud_reg = REG_CONTROL_BAUD_RATE_57600; + break; + } + + /* Wait until the command reaches the baseband */ + mdelay(100); + + /* Set baud on baseband */ + info->ctrl_reg &= ~0x03; + info->ctrl_reg |= baud_reg; + outb(info->ctrl_reg, iobase + REG_CONTROL); + + /* Enable RTS */ + info->ctrl_reg &= ~REG_CONTROL_RTS; + outb(info->ctrl_reg, iobase + REG_CONTROL); + + /* Wait before the next HCI packet can be send */ + mdelay(1000); + } + + if (len == skb->len) { + kfree_skb(skb); + } else { + skb_pull(skb, len); + skb_queue_head(&(info->txq), skb); + } + + info->hdev->stat.byte_tx += len; + + /* Change buffer */ + change_bit(XMIT_BUFFER_NUMBER, &(info->tx_state)); + + } while (test_bit(XMIT_WAKEUP, &(info->tx_state))); + + clear_bit(XMIT_SENDING, &(info->tx_state)); +} + + +static int bluecard_read(unsigned int iobase, unsigned int offset, __u8 *buf, int size) +{ + int i, n, len; + + outb(REG_COMMAND_RX_WIN_ONE, iobase + REG_COMMAND); + + len = inb(iobase + offset); + n = 0; + i = 1; + + while (n < len) { + + if (i == 16) { + outb(REG_COMMAND_RX_WIN_TWO, iobase + REG_COMMAND); + i = 0; + } + + buf[n] = inb(iobase + offset + i); + + n++; + i++; + + } + + return len; +} + + +static void bluecard_receive(struct bluecard_info *info, + unsigned int offset) +{ + unsigned int iobase; + unsigned char buf[31]; + int i, len; + + if (!info) { + BT_ERR("Unknown device"); + return; + } + + iobase = info->p_dev->resource[0]->start; + + if (test_bit(XMIT_SENDING_READY, &(info->tx_state))) + bluecard_enable_activity_led(info); + + len = bluecard_read(iobase, offset, buf, sizeof(buf)); + + for (i = 0; i < len; i++) { + + /* Allocate packet */ + if (!info->rx_skb) { + info->rx_state = RECV_WAIT_PACKET_TYPE; + info->rx_count = 0; + info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); + if (!info->rx_skb) { + BT_ERR("Can't allocate mem for new packet"); + return; + } + } + + if (info->rx_state == RECV_WAIT_PACKET_TYPE) { + + hci_skb_pkt_type(info->rx_skb) = buf[i]; + + switch (hci_skb_pkt_type(info->rx_skb)) { + + case 0x00: + /* init packet */ + if (offset != 0x00) { + set_bit(XMIT_BUF_ONE_READY, &(info->tx_state)); + set_bit(XMIT_BUF_TWO_READY, &(info->tx_state)); + set_bit(XMIT_SENDING_READY, &(info->tx_state)); + bluecard_write_wakeup(info); + } + + kfree_skb(info->rx_skb); + info->rx_skb = NULL; + break; + + case HCI_EVENT_PKT: + info->rx_state = RECV_WAIT_EVENT_HEADER; + info->rx_count = HCI_EVENT_HDR_SIZE; + break; + + case HCI_ACLDATA_PKT: + info->rx_state = RECV_WAIT_ACL_HEADER; + info->rx_count = HCI_ACL_HDR_SIZE; + break; + + case HCI_SCODATA_PKT: + info->rx_state = RECV_WAIT_SCO_HEADER; + info->rx_count = HCI_SCO_HDR_SIZE; + break; + + default: + /* unknown packet */ + BT_ERR("Unknown HCI packet with type 0x%02x received", + hci_skb_pkt_type(info->rx_skb)); + info->hdev->stat.err_rx++; + + kfree_skb(info->rx_skb); + info->rx_skb = NULL; + break; + + } + + } else { + + skb_put_u8(info->rx_skb, buf[i]); + info->rx_count--; + + if (info->rx_count == 0) { + + int dlen; + struct hci_event_hdr *eh; + struct hci_acl_hdr *ah; + struct hci_sco_hdr *sh; + + switch (info->rx_state) { + + case RECV_WAIT_EVENT_HEADER: + eh = hci_event_hdr(info->rx_skb); + info->rx_state = RECV_WAIT_DATA; + info->rx_count = eh->plen; + break; + + case RECV_WAIT_ACL_HEADER: + ah = hci_acl_hdr(info->rx_skb); + dlen = __le16_to_cpu(ah->dlen); + info->rx_state = RECV_WAIT_DATA; + info->rx_count = dlen; + break; + + case RECV_WAIT_SCO_HEADER: + sh = hci_sco_hdr(info->rx_skb); + info->rx_state = RECV_WAIT_DATA; + info->rx_count = sh->dlen; + break; + + case RECV_WAIT_DATA: + hci_recv_frame(info->hdev, info->rx_skb); + info->rx_skb = NULL; + break; + + } + + } + + } + + + } + + info->hdev->stat.byte_rx += len; +} + + +static irqreturn_t bluecard_interrupt(int irq, void *dev_inst) +{ + struct bluecard_info *info = dev_inst; + unsigned int iobase; + unsigned char reg; + + if (!info || !info->hdev) + /* our irq handler is shared */ + return IRQ_NONE; + + if (!test_bit(CARD_READY, &(info->hw_state))) + return IRQ_HANDLED; + + iobase = info->p_dev->resource[0]->start; + + spin_lock(&(info->lock)); + + /* Disable interrupt */ + info->ctrl_reg &= ~REG_CONTROL_INTERRUPT; + outb(info->ctrl_reg, iobase + REG_CONTROL); + + reg = inb(iobase + REG_INTERRUPT); + + if ((reg != 0x00) && (reg != 0xff)) { + + if (reg & 0x04) { + bluecard_receive(info, 0x00); + outb(0x04, iobase + REG_INTERRUPT); + outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND); + } + + if (reg & 0x08) { + bluecard_receive(info, 0x10); + outb(0x08, iobase + REG_INTERRUPT); + outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND); + } + + if (reg & 0x01) { + set_bit(XMIT_BUF_ONE_READY, &(info->tx_state)); + outb(0x01, iobase + REG_INTERRUPT); + bluecard_write_wakeup(info); + } + + if (reg & 0x02) { + set_bit(XMIT_BUF_TWO_READY, &(info->tx_state)); + outb(0x02, iobase + REG_INTERRUPT); + bluecard_write_wakeup(info); + } + + } + + /* Enable interrupt */ + info->ctrl_reg |= REG_CONTROL_INTERRUPT; + outb(info->ctrl_reg, iobase + REG_CONTROL); + + spin_unlock(&(info->lock)); + + return IRQ_HANDLED; +} + + + +/* ======================== Device specific HCI commands ======================== */ + + +static int bluecard_hci_set_baud_rate(struct hci_dev *hdev, int baud) +{ + struct bluecard_info *info = hci_get_drvdata(hdev); + struct sk_buff *skb; + + /* Ericsson baud rate command */ + unsigned char cmd[] = { HCI_COMMAND_PKT, 0x09, 0xfc, 0x01, 0x03 }; + + skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_KERNEL); + if (!skb) { + BT_ERR("Can't allocate mem for new packet"); + return -1; + } + + switch (baud) { + case 460800: + cmd[4] = 0x00; + hci_skb_pkt_type(skb) = PKT_BAUD_RATE_460800; + break; + case 230400: + cmd[4] = 0x01; + hci_skb_pkt_type(skb) = PKT_BAUD_RATE_230400; + break; + case 115200: + cmd[4] = 0x02; + hci_skb_pkt_type(skb) = PKT_BAUD_RATE_115200; + break; + case 57600: + default: + cmd[4] = 0x03; + hci_skb_pkt_type(skb) = PKT_BAUD_RATE_57600; + break; + } + + skb_put_data(skb, cmd, sizeof(cmd)); + + skb_queue_tail(&(info->txq), skb); + + bluecard_write_wakeup(info); + + return 0; +} + + + +/* ======================== HCI interface ======================== */ + + +static int bluecard_hci_flush(struct hci_dev *hdev) +{ + struct bluecard_info *info = hci_get_drvdata(hdev); + + /* Drop TX queue */ + skb_queue_purge(&(info->txq)); + + return 0; +} + + +static int bluecard_hci_open(struct hci_dev *hdev) +{ + struct bluecard_info *info = hci_get_drvdata(hdev); + unsigned int iobase = info->p_dev->resource[0]->start; + + if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) + bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE); + + /* Enable power LED */ + outb(0x08 | 0x20, iobase + 0x30); + + return 0; +} + + +static int bluecard_hci_close(struct hci_dev *hdev) +{ + struct bluecard_info *info = hci_get_drvdata(hdev); + unsigned int iobase = info->p_dev->resource[0]->start; + + bluecard_hci_flush(hdev); + + /* Stop LED timer */ + del_timer_sync(&(info->timer)); + + /* Disable power LED */ + outb(0x00, iobase + 0x30); + + return 0; +} + + +static int bluecard_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct bluecard_info *info = hci_get_drvdata(hdev); + + switch (hci_skb_pkt_type(skb)) { + case HCI_COMMAND_PKT: + hdev->stat.cmd_tx++; + break; + case HCI_ACLDATA_PKT: + hdev->stat.acl_tx++; + break; + case HCI_SCODATA_PKT: + hdev->stat.sco_tx++; + break; + } + + /* Prepend skb with frame type */ + memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); + skb_queue_tail(&(info->txq), skb); + + bluecard_write_wakeup(info); + + return 0; +} + + + +/* ======================== Card services HCI interaction ======================== */ + + +static int bluecard_open(struct bluecard_info *info) +{ + unsigned int iobase = info->p_dev->resource[0]->start; + struct hci_dev *hdev; + unsigned char id; + + spin_lock_init(&(info->lock)); + + timer_setup(&info->timer, bluecard_activity_led_timeout, 0); + + skb_queue_head_init(&(info->txq)); + + info->rx_state = RECV_WAIT_PACKET_TYPE; + info->rx_count = 0; + info->rx_skb = NULL; + + /* Initialize HCI device */ + hdev = hci_alloc_dev(); + if (!hdev) { + BT_ERR("Can't allocate HCI device"); + return -ENOMEM; + } + + info->hdev = hdev; + + hdev->bus = HCI_PCCARD; + hci_set_drvdata(hdev, info); + SET_HCIDEV_DEV(hdev, &info->p_dev->dev); + + hdev->open = bluecard_hci_open; + hdev->close = bluecard_hci_close; + hdev->flush = bluecard_hci_flush; + hdev->send = bluecard_hci_send_frame; + + id = inb(iobase + 0x30); + + if ((id & 0x0f) == 0x02) + set_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)); + + if (id & 0x10) + set_bit(CARD_HAS_POWER_LED, &(info->hw_state)); + + if (id & 0x20) + set_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state)); + + /* Reset card */ + info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET; + outb(info->ctrl_reg, iobase + REG_CONTROL); + + /* Turn FPGA off */ + outb(0x80, iobase + 0x30); + + /* Wait some time */ + msleep(10); + + /* Turn FPGA on */ + outb(0x00, iobase + 0x30); + + /* Activate card */ + info->ctrl_reg = REG_CONTROL_BT_ON | REG_CONTROL_BT_RES_PU; + outb(info->ctrl_reg, iobase + REG_CONTROL); + + /* Enable interrupt */ + outb(0xff, iobase + REG_INTERRUPT); + info->ctrl_reg |= REG_CONTROL_INTERRUPT; + outb(info->ctrl_reg, iobase + REG_CONTROL); + + if ((id & 0x0f) == 0x03) { + /* Disable RTS */ + info->ctrl_reg |= REG_CONTROL_RTS; + outb(info->ctrl_reg, iobase + REG_CONTROL); + + /* Set baud rate */ + info->ctrl_reg |= 0x03; + outb(info->ctrl_reg, iobase + REG_CONTROL); + + /* Enable RTS */ + info->ctrl_reg &= ~REG_CONTROL_RTS; + outb(info->ctrl_reg, iobase + REG_CONTROL); + + set_bit(XMIT_BUF_ONE_READY, &(info->tx_state)); + set_bit(XMIT_BUF_TWO_READY, &(info->tx_state)); + set_bit(XMIT_SENDING_READY, &(info->tx_state)); + } + + /* Start the RX buffers */ + outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND); + outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND); + + /* Signal that the hardware is ready */ + set_bit(CARD_READY, &(info->hw_state)); + + /* Drop TX queue */ + skb_queue_purge(&(info->txq)); + + /* Control the point at which RTS is enabled */ + outb((0x0f << RTS_LEVEL_SHIFT_BITS) | 1, iobase + REG_RX_CONTROL); + + /* Timeout before it is safe to send the first HCI packet */ + msleep(1250); + + /* Register HCI device */ + if (hci_register_dev(hdev) < 0) { + BT_ERR("Can't register HCI device"); + info->hdev = NULL; + hci_free_dev(hdev); + return -ENODEV; + } + + return 0; +} + + +static int bluecard_close(struct bluecard_info *info) +{ + unsigned int iobase = info->p_dev->resource[0]->start; + struct hci_dev *hdev = info->hdev; + + if (!hdev) + return -ENODEV; + + bluecard_hci_close(hdev); + + clear_bit(CARD_READY, &(info->hw_state)); + + /* Reset card */ + info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET; + outb(info->ctrl_reg, iobase + REG_CONTROL); + + /* Turn FPGA off */ + outb(0x80, iobase + 0x30); + + hci_unregister_dev(hdev); + hci_free_dev(hdev); + + return 0; +} + +static int bluecard_probe(struct pcmcia_device *link) +{ + struct bluecard_info *info; + + /* Create new info device */ + info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->p_dev = link; + link->priv = info; + + link->config_flags |= CONF_ENABLE_IRQ; + + return bluecard_config(link); +} + + +static void bluecard_detach(struct pcmcia_device *link) +{ + bluecard_release(link); +} + + +static int bluecard_config(struct pcmcia_device *link) +{ + struct bluecard_info *info = link->priv; + int i, n; + + link->config_index = 0x20; + + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 64; + link->io_lines = 6; + + for (n = 0; n < 0x400; n += 0x40) { + link->resource[0]->start = n ^ 0x300; + i = pcmcia_request_io(link); + if (i == 0) + break; + } + + if (i != 0) + goto failed; + + i = pcmcia_request_irq(link, bluecard_interrupt); + if (i != 0) + goto failed; + + i = pcmcia_enable_device(link); + if (i != 0) + goto failed; + + if (bluecard_open(info) != 0) + goto failed; + + return 0; + +failed: + bluecard_release(link); + return -ENODEV; +} + + +static void bluecard_release(struct pcmcia_device *link) +{ + struct bluecard_info *info = link->priv; + + bluecard_close(info); + + del_timer_sync(&(info->timer)); + + pcmcia_disable_device(link); +} + +static const struct pcmcia_device_id bluecard_ids[] = { + PCMCIA_DEVICE_PROD_ID12("BlueCard", "LSE041", 0xbaf16fbf, 0x657cc15e), + PCMCIA_DEVICE_PROD_ID12("BTCFCARD", "LSE139", 0xe3987764, 0x2524b59c), + PCMCIA_DEVICE_PROD_ID12("WSS", "LSE039", 0x0a0736ec, 0x24e6dfab), + PCMCIA_DEVICE_NULL +}; +MODULE_DEVICE_TABLE(pcmcia, bluecard_ids); + +static struct pcmcia_driver bluecard_driver = { + .owner = THIS_MODULE, + .name = "bluecard_cs", + .probe = bluecard_probe, + .remove = bluecard_detach, + .id_table = bluecard_ids, +}; +module_pcmcia_driver(bluecard_driver); -- cgit v1.2.3