From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/bluetooth/btmrvl_drv.h | 173 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) create mode 100644 drivers/bluetooth/btmrvl_drv.h (limited to 'drivers/bluetooth/btmrvl_drv.h') diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h new file mode 100644 index 000000000..d7df05c56 --- /dev/null +++ b/drivers/bluetooth/btmrvl_drv.h @@ -0,0 +1,173 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Marvell Bluetooth driver: global definitions & declarations + * + * Copyright (C) 2009, Marvell International Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BTM_HEADER_LEN 4 +#define BTM_UPLD_SIZE 2312 + +/* Time to wait until Host Sleep state change in millisecond */ +#define WAIT_UNTIL_HS_STATE_CHANGED msecs_to_jiffies(5000) +/* Time to wait for command response in millisecond */ +#define WAIT_UNTIL_CMD_RESP msecs_to_jiffies(5000) + +enum rdwr_status { + RDWR_STATUS_SUCCESS = 0, + RDWR_STATUS_FAILURE = 1, + RDWR_STATUS_DONE = 2 +}; + +#define FW_DUMP_MAX_NAME_LEN 8 +#define FW_DUMP_HOST_READY 0xEE +#define FW_DUMP_DONE 0xFF +#define FW_DUMP_READ_DONE 0xFE + +struct memory_type_mapping { + u8 mem_name[FW_DUMP_MAX_NAME_LEN]; + u8 *mem_ptr; + u32 mem_size; + u8 done_flag; +}; + +struct btmrvl_thread { + struct task_struct *task; + wait_queue_head_t wait_q; + void *priv; +}; + +struct btmrvl_device { + void *card; + struct hci_dev *hcidev; + + u8 dev_type; + + u8 tx_dnld_rdy; + + u8 psmode; + u8 pscmd; + u8 hsmode; + u8 hscmd; + + /* Low byte is gap, high byte is GPIO */ + u16 gpio_gap; + + u8 hscfgcmd; + u8 sendcmdflag; +}; + +struct btmrvl_adapter { + void *hw_regs_buf; + u8 *hw_regs; + u32 int_count; + struct sk_buff_head tx_queue; + u8 psmode; + u8 ps_state; + u8 hs_state; + u8 wakeup_tries; + wait_queue_head_t cmd_wait_q; + wait_queue_head_t event_hs_wait_q; + u8 cmd_complete; + bool is_suspended; + bool is_suspending; +}; + +struct btmrvl_private { + struct btmrvl_device btmrvl_dev; + struct btmrvl_adapter *adapter; + struct btmrvl_thread main_thread; + int (*hw_host_to_card)(struct btmrvl_private *priv, + u8 *payload, u16 nb); + int (*hw_wakeup_firmware)(struct btmrvl_private *priv); + int (*hw_process_int_status)(struct btmrvl_private *priv); + spinlock_t driver_lock; /* spinlock used by driver */ +#ifdef CONFIG_DEBUG_FS + void *debugfs_data; +#endif + bool surprise_removed; +}; + +#define MRVL_VENDOR_PKT 0xFE + +/* Vendor specific Bluetooth commands */ +#define BT_CMD_PSCAN_WIN_REPORT_ENABLE 0xFC03 +#define BT_CMD_ROUTE_SCO_TO_HOST 0xFC1D +#define BT_CMD_SET_BDADDR 0xFC22 +#define BT_CMD_AUTO_SLEEP_MODE 0xFC23 +#define BT_CMD_HOST_SLEEP_CONFIG 0xFC59 +#define BT_CMD_HOST_SLEEP_ENABLE 0xFC5A +#define BT_CMD_MODULE_CFG_REQ 0xFC5B +#define BT_CMD_LOAD_CONFIG_DATA 0xFC61 + +/* Sub-commands: Module Bringup/Shutdown Request/Response */ +#define MODULE_BRINGUP_REQ 0xF1 +#define MODULE_BROUGHT_UP 0x00 +#define MODULE_ALREADY_UP 0x0C + +#define MODULE_SHUTDOWN_REQ 0xF2 + +/* Vendor specific Bluetooth events */ +#define BT_EVENT_AUTO_SLEEP_MODE 0x23 +#define BT_EVENT_HOST_SLEEP_CONFIG 0x59 +#define BT_EVENT_HOST_SLEEP_ENABLE 0x5A +#define BT_EVENT_MODULE_CFG_REQ 0x5B +#define BT_EVENT_POWER_STATE 0x20 + +/* Bluetooth Power States */ +#define BT_PS_ENABLE 0x02 +#define BT_PS_DISABLE 0x03 +#define BT_PS_SLEEP 0x01 + +/* Host Sleep states */ +#define HS_ACTIVATED 0x01 +#define HS_DEACTIVATED 0x00 + +/* Power Save modes */ +#define PS_SLEEP 0x01 +#define PS_AWAKE 0x00 + +#define BT_CAL_HDR_LEN 4 +#define BT_CAL_DATA_SIZE 28 + +struct btmrvl_event { + u8 ec; /* event counter */ + u8 length; + u8 data[4]; +} __packed; + +/* Prototype of global function */ + +int btmrvl_register_hdev(struct btmrvl_private *priv); +struct btmrvl_private *btmrvl_add_card(void *card); +int btmrvl_remove_card(struct btmrvl_private *priv); + +void btmrvl_interrupt(struct btmrvl_private *priv); + +bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb); +int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb); + +int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, u8 subcmd); +int btmrvl_pscan_window_reporting(struct btmrvl_private *priv, u8 subcmd); +int btmrvl_send_hscfg_cmd(struct btmrvl_private *priv); +int btmrvl_enable_ps(struct btmrvl_private *priv); +int btmrvl_prepare_command(struct btmrvl_private *priv); +int btmrvl_enable_hs(struct btmrvl_private *priv); + +#ifdef CONFIG_DEBUG_FS +void btmrvl_debugfs_init(struct hci_dev *hdev); +void btmrvl_debugfs_remove(struct hci_dev *hdev); +#endif -- cgit v1.2.3