From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/bluetooth/hci_mrvl.c | 446 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 446 insertions(+) create mode 100644 drivers/bluetooth/hci_mrvl.c (limited to 'drivers/bluetooth/hci_mrvl.c') diff --git a/drivers/bluetooth/hci_mrvl.c b/drivers/bluetooth/hci_mrvl.c new file mode 100644 index 000000000..fbc3f7c3a --- /dev/null +++ b/drivers/bluetooth/hci_mrvl.c @@ -0,0 +1,446 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Bluetooth HCI UART driver for marvell devices + * + * Copyright (C) 2016 Marvell International Ltd. + * Copyright (C) 2016 Intel Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "hci_uart.h" + +#define HCI_FW_REQ_PKT 0xA5 +#define HCI_CHIP_VER_PKT 0xAA + +#define MRVL_ACK 0x5A +#define MRVL_NAK 0xBF +#define MRVL_RAW_DATA 0x1F + +enum { + STATE_CHIP_VER_PENDING, + STATE_FW_REQ_PENDING, +}; + +struct mrvl_data { + struct sk_buff *rx_skb; + struct sk_buff_head txq; + struct sk_buff_head rawq; + unsigned long flags; + unsigned int tx_len; + u8 id, rev; +}; + +struct mrvl_serdev { + struct hci_uart hu; +}; + +struct hci_mrvl_pkt { + __le16 lhs; + __le16 rhs; +} __packed; +#define HCI_MRVL_PKT_SIZE 4 + +static int mrvl_open(struct hci_uart *hu) +{ + struct mrvl_data *mrvl; + int ret; + + BT_DBG("hu %p", hu); + + if (!hci_uart_has_flow_control(hu)) + return -EOPNOTSUPP; + + mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL); + if (!mrvl) + return -ENOMEM; + + skb_queue_head_init(&mrvl->txq); + skb_queue_head_init(&mrvl->rawq); + + set_bit(STATE_CHIP_VER_PENDING, &mrvl->flags); + + hu->priv = mrvl; + + if (hu->serdev) { + ret = serdev_device_open(hu->serdev); + if (ret) + goto err; + } + + return 0; +err: + kfree(mrvl); + + return ret; +} + +static int mrvl_close(struct hci_uart *hu) +{ + struct mrvl_data *mrvl = hu->priv; + + BT_DBG("hu %p", hu); + + if (hu->serdev) + serdev_device_close(hu->serdev); + + skb_queue_purge(&mrvl->txq); + skb_queue_purge(&mrvl->rawq); + kfree_skb(mrvl->rx_skb); + kfree(mrvl); + + hu->priv = NULL; + return 0; +} + +static int mrvl_flush(struct hci_uart *hu) +{ + struct mrvl_data *mrvl = hu->priv; + + BT_DBG("hu %p", hu); + + skb_queue_purge(&mrvl->txq); + skb_queue_purge(&mrvl->rawq); + + return 0; +} + +static struct sk_buff *mrvl_dequeue(struct hci_uart *hu) +{ + struct mrvl_data *mrvl = hu->priv; + struct sk_buff *skb; + + skb = skb_dequeue(&mrvl->txq); + if (!skb) { + /* Any raw data ? */ + skb = skb_dequeue(&mrvl->rawq); + } else { + /* Prepend skb with frame type */ + memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); + } + + return skb; +} + +static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb) +{ + struct mrvl_data *mrvl = hu->priv; + + skb_queue_tail(&mrvl->txq, skb); + return 0; +} + +static void mrvl_send_ack(struct hci_uart *hu, unsigned char type) +{ + struct mrvl_data *mrvl = hu->priv; + struct sk_buff *skb; + + /* No H4 payload, only 1 byte header */ + skb = bt_skb_alloc(0, GFP_ATOMIC); + if (!skb) { + bt_dev_err(hu->hdev, "Unable to alloc ack/nak packet"); + return; + } + hci_skb_pkt_type(skb) = type; + + skb_queue_tail(&mrvl->txq, skb); + hci_uart_tx_wakeup(hu); +} + +static int mrvl_recv_fw_req(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct hci_mrvl_pkt *pkt = (void *)skb->data; + struct hci_uart *hu = hci_get_drvdata(hdev); + struct mrvl_data *mrvl = hu->priv; + int ret = 0; + + if ((pkt->lhs ^ pkt->rhs) != 0xffff) { + bt_dev_err(hdev, "Corrupted mrvl header"); + mrvl_send_ack(hu, MRVL_NAK); + ret = -EINVAL; + goto done; + } + mrvl_send_ack(hu, MRVL_ACK); + + if (!test_bit(STATE_FW_REQ_PENDING, &mrvl->flags)) { + bt_dev_err(hdev, "Received unexpected firmware request"); + ret = -EINVAL; + goto done; + } + + mrvl->tx_len = le16_to_cpu(pkt->lhs); + + clear_bit(STATE_FW_REQ_PENDING, &mrvl->flags); + smp_mb__after_atomic(); + wake_up_bit(&mrvl->flags, STATE_FW_REQ_PENDING); + +done: + kfree_skb(skb); + return ret; +} + +static int mrvl_recv_chip_ver(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct hci_mrvl_pkt *pkt = (void *)skb->data; + struct hci_uart *hu = hci_get_drvdata(hdev); + struct mrvl_data *mrvl = hu->priv; + u16 version = le16_to_cpu(pkt->lhs); + int ret = 0; + + if ((pkt->lhs ^ pkt->rhs) != 0xffff) { + bt_dev_err(hdev, "Corrupted mrvl header"); + mrvl_send_ack(hu, MRVL_NAK); + ret = -EINVAL; + goto done; + } + mrvl_send_ack(hu, MRVL_ACK); + + if (!test_bit(STATE_CHIP_VER_PENDING, &mrvl->flags)) { + bt_dev_err(hdev, "Received unexpected chip version"); + goto done; + } + + mrvl->id = version; + mrvl->rev = version >> 8; + + bt_dev_info(hdev, "Controller id = %x, rev = %x", mrvl->id, mrvl->rev); + + clear_bit(STATE_CHIP_VER_PENDING, &mrvl->flags); + smp_mb__after_atomic(); + wake_up_bit(&mrvl->flags, STATE_CHIP_VER_PENDING); + +done: + kfree_skb(skb); + return ret; +} + +#define HCI_RECV_CHIP_VER \ + .type = HCI_CHIP_VER_PKT, \ + .hlen = HCI_MRVL_PKT_SIZE, \ + .loff = 0, \ + .lsize = 0, \ + .maxlen = HCI_MRVL_PKT_SIZE + +#define HCI_RECV_FW_REQ \ + .type = HCI_FW_REQ_PKT, \ + .hlen = HCI_MRVL_PKT_SIZE, \ + .loff = 0, \ + .lsize = 0, \ + .maxlen = HCI_MRVL_PKT_SIZE + +static const struct h4_recv_pkt mrvl_recv_pkts[] = { + { H4_RECV_ACL, .recv = hci_recv_frame }, + { H4_RECV_SCO, .recv = hci_recv_frame }, + { H4_RECV_EVENT, .recv = hci_recv_frame }, + { HCI_RECV_FW_REQ, .recv = mrvl_recv_fw_req }, + { HCI_RECV_CHIP_VER, .recv = mrvl_recv_chip_ver }, +}; + +static int mrvl_recv(struct hci_uart *hu, const void *data, int count) +{ + struct mrvl_data *mrvl = hu->priv; + + if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) + return -EUNATCH; + + mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count, + mrvl_recv_pkts, + ARRAY_SIZE(mrvl_recv_pkts)); + if (IS_ERR(mrvl->rx_skb)) { + int err = PTR_ERR(mrvl->rx_skb); + bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err); + mrvl->rx_skb = NULL; + return err; + } + + return count; +} + +static int mrvl_load_firmware(struct hci_dev *hdev, const char *name) +{ + struct hci_uart *hu = hci_get_drvdata(hdev); + struct mrvl_data *mrvl = hu->priv; + const struct firmware *fw = NULL; + const u8 *fw_ptr, *fw_max; + int err; + + err = request_firmware(&fw, name, &hdev->dev); + if (err < 0) { + bt_dev_err(hdev, "Failed to load firmware file %s", name); + return err; + } + + fw_ptr = fw->data; + fw_max = fw->data + fw->size; + + bt_dev_info(hdev, "Loading %s", name); + + set_bit(STATE_FW_REQ_PENDING, &mrvl->flags); + + while (fw_ptr <= fw_max) { + struct sk_buff *skb; + + /* Controller drives the firmware load by sending firmware + * request packets containing the expected fragment size. + */ + err = wait_on_bit_timeout(&mrvl->flags, STATE_FW_REQ_PENDING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(2000)); + if (err == 1) { + bt_dev_err(hdev, "Firmware load interrupted"); + err = -EINTR; + break; + } else if (err) { + bt_dev_err(hdev, "Firmware request timeout"); + err = -ETIMEDOUT; + break; + } + + bt_dev_dbg(hdev, "Firmware request, expecting %d bytes", + mrvl->tx_len); + + if (fw_ptr == fw_max) { + /* Controller requests a null size once firmware is + * fully loaded. If controller expects more data, there + * is an issue. + */ + if (!mrvl->tx_len) { + bt_dev_info(hdev, "Firmware loading complete"); + } else { + bt_dev_err(hdev, "Firmware loading failure"); + err = -EINVAL; + } + break; + } + + if (fw_ptr + mrvl->tx_len > fw_max) { + mrvl->tx_len = fw_max - fw_ptr; + bt_dev_dbg(hdev, "Adjusting tx_len to %d", + mrvl->tx_len); + } + + skb = bt_skb_alloc(mrvl->tx_len, GFP_KERNEL); + if (!skb) { + bt_dev_err(hdev, "Failed to alloc mem for FW packet"); + err = -ENOMEM; + break; + } + bt_cb(skb)->pkt_type = MRVL_RAW_DATA; + + skb_put_data(skb, fw_ptr, mrvl->tx_len); + fw_ptr += mrvl->tx_len; + + set_bit(STATE_FW_REQ_PENDING, &mrvl->flags); + + skb_queue_tail(&mrvl->rawq, skb); + hci_uart_tx_wakeup(hu); + } + + release_firmware(fw); + return err; +} + +static int mrvl_setup(struct hci_uart *hu) +{ + int err; + + hci_uart_set_flow_control(hu, true); + + err = mrvl_load_firmware(hu->hdev, "mrvl/helper_uart_3000000.bin"); + if (err) { + bt_dev_err(hu->hdev, "Unable to download firmware helper"); + return -EINVAL; + } + + /* Let the final ack go out before switching the baudrate */ + hci_uart_wait_until_sent(hu); + + if (hu->serdev) + serdev_device_set_baudrate(hu->serdev, 3000000); + else + hci_uart_set_baudrate(hu, 3000000); + + hci_uart_set_flow_control(hu, false); + + err = mrvl_load_firmware(hu->hdev, "mrvl/uart8897_bt.bin"); + if (err) + return err; + + return 0; +} + +static const struct hci_uart_proto mrvl_proto = { + .id = HCI_UART_MRVL, + .name = "Marvell", + .init_speed = 115200, + .open = mrvl_open, + .close = mrvl_close, + .flush = mrvl_flush, + .setup = mrvl_setup, + .recv = mrvl_recv, + .enqueue = mrvl_enqueue, + .dequeue = mrvl_dequeue, +}; + +static int mrvl_serdev_probe(struct serdev_device *serdev) +{ + struct mrvl_serdev *mrvldev; + + mrvldev = devm_kzalloc(&serdev->dev, sizeof(*mrvldev), GFP_KERNEL); + if (!mrvldev) + return -ENOMEM; + + mrvldev->hu.serdev = serdev; + serdev_device_set_drvdata(serdev, mrvldev); + + return hci_uart_register_device(&mrvldev->hu, &mrvl_proto); +} + +static void mrvl_serdev_remove(struct serdev_device *serdev) +{ + struct mrvl_serdev *mrvldev = serdev_device_get_drvdata(serdev); + + hci_uart_unregister_device(&mrvldev->hu); +} + +#ifdef CONFIG_OF +static const struct of_device_id mrvl_bluetooth_of_match[] = { + { .compatible = "mrvl,88w8897" }, + { }, +}; +MODULE_DEVICE_TABLE(of, mrvl_bluetooth_of_match); +#endif + +static struct serdev_device_driver mrvl_serdev_driver = { + .probe = mrvl_serdev_probe, + .remove = mrvl_serdev_remove, + .driver = { + .name = "hci_uart_mrvl", + .of_match_table = of_match_ptr(mrvl_bluetooth_of_match), + }, +}; + +int __init mrvl_init(void) +{ + serdev_device_driver_register(&mrvl_serdev_driver); + + return hci_uart_register_proto(&mrvl_proto); +} + +int __exit mrvl_deinit(void) +{ + serdev_device_driver_unregister(&mrvl_serdev_driver); + + return hci_uart_unregister_proto(&mrvl_proto); +} -- cgit v1.2.3