From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/char/hw_random/npcm-rng.c | 189 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 189 insertions(+) create mode 100644 drivers/char/hw_random/npcm-rng.c (limited to 'drivers/char/hw_random/npcm-rng.c') diff --git a/drivers/char/hw_random/npcm-rng.c b/drivers/char/hw_random/npcm-rng.c new file mode 100644 index 000000000..9903d0357 --- /dev/null +++ b/drivers/char/hw_random/npcm-rng.c @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology corporation. + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define NPCM_RNGCS_REG 0x00 /* Control and status register */ +#define NPCM_RNGD_REG 0x04 /* Data register */ +#define NPCM_RNGMODE_REG 0x08 /* Mode register */ + +#define NPCM_RNG_CLK_SET_62_5MHZ BIT(2) /* 60-80 MHz */ +#define NPCM_RNG_CLK_SET_25MHZ GENMASK(4, 3) /* 20-25 MHz */ +#define NPCM_RNG_DATA_VALID BIT(1) +#define NPCM_RNG_ENABLE BIT(0) +#define NPCM_RNG_M1ROSEL BIT(1) + +#define NPCM_RNG_TIMEOUT_USEC 20000 +#define NPCM_RNG_POLL_USEC 1000 + +#define to_npcm_rng(p) container_of(p, struct npcm_rng, rng) + +struct npcm_rng { + void __iomem *base; + struct hwrng rng; + u32 clkp; +}; + +static int npcm_rng_init(struct hwrng *rng) +{ + struct npcm_rng *priv = to_npcm_rng(rng); + + writel(priv->clkp | NPCM_RNG_ENABLE, priv->base + NPCM_RNGCS_REG); + + return 0; +} + +static void npcm_rng_cleanup(struct hwrng *rng) +{ + struct npcm_rng *priv = to_npcm_rng(rng); + + writel(priv->clkp, priv->base + NPCM_RNGCS_REG); +} + +static int npcm_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait) +{ + struct npcm_rng *priv = to_npcm_rng(rng); + int retval = 0; + int ready; + + pm_runtime_get_sync((struct device *)priv->rng.priv); + + while (max) { + if (wait) { + if (readb_poll_timeout(priv->base + NPCM_RNGCS_REG, + ready, + ready & NPCM_RNG_DATA_VALID, + NPCM_RNG_POLL_USEC, + NPCM_RNG_TIMEOUT_USEC)) + break; + } else { + if ((readb(priv->base + NPCM_RNGCS_REG) & + NPCM_RNG_DATA_VALID) == 0) + break; + } + + *(u8 *)buf = readb(priv->base + NPCM_RNGD_REG); + retval++; + buf++; + max--; + } + + pm_runtime_mark_last_busy((struct device *)priv->rng.priv); + pm_runtime_put_sync_autosuspend((struct device *)priv->rng.priv); + + return retval || !wait ? retval : -EIO; +} + +static int npcm_rng_probe(struct platform_device *pdev) +{ + struct npcm_rng *priv; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + dev_set_drvdata(&pdev->dev, priv); + pm_runtime_set_autosuspend_delay(&pdev->dev, 100); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_enable(&pdev->dev); + +#ifndef CONFIG_PM + priv->rng.init = npcm_rng_init; + priv->rng.cleanup = npcm_rng_cleanup; +#endif + priv->rng.name = pdev->name; + priv->rng.read = npcm_rng_read; + priv->rng.priv = (unsigned long)&pdev->dev; + priv->clkp = (u32)(uintptr_t)of_device_get_match_data(&pdev->dev); + + writel(NPCM_RNG_M1ROSEL, priv->base + NPCM_RNGMODE_REG); + + ret = devm_hwrng_register(&pdev->dev, &priv->rng); + if (ret) { + dev_err(&pdev->dev, "Failed to register rng device: %d\n", + ret); + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + return ret; + } + + return 0; +} + +static int npcm_rng_remove(struct platform_device *pdev) +{ + struct npcm_rng *priv = platform_get_drvdata(pdev); + + devm_hwrng_unregister(&pdev->dev, &priv->rng); + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM +static int npcm_rng_runtime_suspend(struct device *dev) +{ + struct npcm_rng *priv = dev_get_drvdata(dev); + + npcm_rng_cleanup(&priv->rng); + + return 0; +} + +static int npcm_rng_runtime_resume(struct device *dev) +{ + struct npcm_rng *priv = dev_get_drvdata(dev); + + return npcm_rng_init(&priv->rng); +} +#endif + +static const struct dev_pm_ops npcm_rng_pm_ops = { + SET_RUNTIME_PM_OPS(npcm_rng_runtime_suspend, + npcm_rng_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +}; + +static const struct of_device_id rng_dt_id[] __maybe_unused = { + { .compatible = "nuvoton,npcm750-rng", + .data = (void *)NPCM_RNG_CLK_SET_25MHZ }, + { .compatible = "nuvoton,npcm845-rng", + .data = (void *)NPCM_RNG_CLK_SET_62_5MHZ }, + {}, +}; +MODULE_DEVICE_TABLE(of, rng_dt_id); + +static struct platform_driver npcm_rng_driver = { + .driver = { + .name = "npcm-rng", + .pm = &npcm_rng_pm_ops, + .of_match_table = of_match_ptr(rng_dt_id), + }, + .probe = npcm_rng_probe, + .remove = npcm_rng_remove, +}; + +module_platform_driver(npcm_rng_driver); + +MODULE_DESCRIPTION("Nuvoton NPCM Random Number Generator Driver"); +MODULE_AUTHOR("Tomer Maimon "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3