From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/char/ipmi/bt-bmc.c | 493 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 493 insertions(+) create mode 100644 drivers/char/ipmi/bt-bmc.c (limited to 'drivers/char/ipmi/bt-bmc.c') diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c new file mode 100644 index 000000000..7450904e3 --- /dev/null +++ b/drivers/char/ipmi/bt-bmc.c @@ -0,0 +1,493 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2015-2016, IBM Corporation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * This is a BMC device used to communicate to the host + */ +#define DEVICE_NAME "ipmi-bt-host" + +#define BT_IO_BASE 0xe4 +#define BT_IRQ 10 + +#define BT_CR0 0x0 +#define BT_CR0_IO_BASE 16 +#define BT_CR0_IRQ 12 +#define BT_CR0_EN_CLR_SLV_RDP 0x8 +#define BT_CR0_EN_CLR_SLV_WRP 0x4 +#define BT_CR0_ENABLE_IBT 0x1 +#define BT_CR1 0x4 +#define BT_CR1_IRQ_H2B 0x01 +#define BT_CR1_IRQ_HBUSY 0x40 +#define BT_CR2 0x8 +#define BT_CR2_IRQ_H2B 0x01 +#define BT_CR2_IRQ_HBUSY 0x40 +#define BT_CR3 0xc +#define BT_CTRL 0x10 +#define BT_CTRL_B_BUSY 0x80 +#define BT_CTRL_H_BUSY 0x40 +#define BT_CTRL_OEM0 0x20 +#define BT_CTRL_SMS_ATN 0x10 +#define BT_CTRL_B2H_ATN 0x08 +#define BT_CTRL_H2B_ATN 0x04 +#define BT_CTRL_CLR_RD_PTR 0x02 +#define BT_CTRL_CLR_WR_PTR 0x01 +#define BT_BMC2HOST 0x14 +#define BT_INTMASK 0x18 +#define BT_INTMASK_B2H_IRQEN 0x01 +#define BT_INTMASK_B2H_IRQ 0x02 +#define BT_INTMASK_BMC_HWRST 0x80 + +#define BT_BMC_BUFFER_SIZE 256 + +struct bt_bmc { + struct device dev; + struct miscdevice miscdev; + void __iomem *base; + int irq; + wait_queue_head_t queue; + struct timer_list poll_timer; + struct mutex mutex; +}; + +static atomic_t open_count = ATOMIC_INIT(0); + +static u8 bt_inb(struct bt_bmc *bt_bmc, int reg) +{ + return readb(bt_bmc->base + reg); +} + +static void bt_outb(struct bt_bmc *bt_bmc, u8 data, int reg) +{ + writeb(data, bt_bmc->base + reg); +} + +static void clr_rd_ptr(struct bt_bmc *bt_bmc) +{ + bt_outb(bt_bmc, BT_CTRL_CLR_RD_PTR, BT_CTRL); +} + +static void clr_wr_ptr(struct bt_bmc *bt_bmc) +{ + bt_outb(bt_bmc, BT_CTRL_CLR_WR_PTR, BT_CTRL); +} + +static void clr_h2b_atn(struct bt_bmc *bt_bmc) +{ + bt_outb(bt_bmc, BT_CTRL_H2B_ATN, BT_CTRL); +} + +static void set_b_busy(struct bt_bmc *bt_bmc) +{ + if (!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY)) + bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); +} + +static void clr_b_busy(struct bt_bmc *bt_bmc) +{ + if (bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY) + bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); +} + +static void set_b2h_atn(struct bt_bmc *bt_bmc) +{ + bt_outb(bt_bmc, BT_CTRL_B2H_ATN, BT_CTRL); +} + +static u8 bt_read(struct bt_bmc *bt_bmc) +{ + return bt_inb(bt_bmc, BT_BMC2HOST); +} + +static ssize_t bt_readn(struct bt_bmc *bt_bmc, u8 *buf, size_t n) +{ + int i; + + for (i = 0; i < n; i++) + buf[i] = bt_read(bt_bmc); + return n; +} + +static void bt_write(struct bt_bmc *bt_bmc, u8 c) +{ + bt_outb(bt_bmc, c, BT_BMC2HOST); +} + +static ssize_t bt_writen(struct bt_bmc *bt_bmc, u8 *buf, size_t n) +{ + int i; + + for (i = 0; i < n; i++) + bt_write(bt_bmc, buf[i]); + return n; +} + +static void set_sms_atn(struct bt_bmc *bt_bmc) +{ + bt_outb(bt_bmc, BT_CTRL_SMS_ATN, BT_CTRL); +} + +static struct bt_bmc *file_bt_bmc(struct file *file) +{ + return container_of(file->private_data, struct bt_bmc, miscdev); +} + +static int bt_bmc_open(struct inode *inode, struct file *file) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + + if (atomic_inc_return(&open_count) == 1) { + clr_b_busy(bt_bmc); + return 0; + } + + atomic_dec(&open_count); + return -EBUSY; +} + +/* + * The BT (Block Transfer) interface means that entire messages are + * buffered by the host before a notification is sent to the BMC that + * there is data to be read. The first byte is the length and the + * message data follows. The read operation just tries to capture the + * whole before returning it to userspace. + * + * BT Message format : + * + * Byte 1 Byte 2 Byte 3 Byte 4 Byte 5:N + * Length NetFn/LUN Seq Cmd Data + * + */ +static ssize_t bt_bmc_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + u8 len; + int len_byte = 1; + u8 kbuffer[BT_BMC_BUFFER_SIZE]; + ssize_t ret = 0; + ssize_t nread; + + WARN_ON(*ppos); + + if (wait_event_interruptible(bt_bmc->queue, + bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN)) + return -ERESTARTSYS; + + mutex_lock(&bt_bmc->mutex); + + if (unlikely(!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN))) { + ret = -EIO; + goto out_unlock; + } + + set_b_busy(bt_bmc); + clr_h2b_atn(bt_bmc); + clr_rd_ptr(bt_bmc); + + /* + * The BT frames start with the message length, which does not + * include the length byte. + */ + kbuffer[0] = bt_read(bt_bmc); + len = kbuffer[0]; + + /* We pass the length back to userspace as well */ + if (len + 1 > count) + len = count - 1; + + while (len) { + nread = min_t(ssize_t, len, sizeof(kbuffer) - len_byte); + + bt_readn(bt_bmc, kbuffer + len_byte, nread); + + if (copy_to_user(buf, kbuffer, nread + len_byte)) { + ret = -EFAULT; + break; + } + len -= nread; + buf += nread + len_byte; + ret += nread + len_byte; + len_byte = 0; + } + + clr_b_busy(bt_bmc); + +out_unlock: + mutex_unlock(&bt_bmc->mutex); + return ret; +} + +/* + * BT Message response format : + * + * Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6:N + * Length NetFn/LUN Seq Cmd Code Data + */ +static ssize_t bt_bmc_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + u8 kbuffer[BT_BMC_BUFFER_SIZE]; + ssize_t ret = 0; + ssize_t nwritten; + + /* + * send a minimum response size + */ + if (count < 5) + return -EINVAL; + + WARN_ON(*ppos); + + /* + * There's no interrupt for clearing bmc busy so we have to + * poll + */ + if (wait_event_interruptible(bt_bmc->queue, + !(bt_inb(bt_bmc, BT_CTRL) & + (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN)))) + return -ERESTARTSYS; + + mutex_lock(&bt_bmc->mutex); + + if (unlikely(bt_inb(bt_bmc, BT_CTRL) & + (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) { + ret = -EIO; + goto out_unlock; + } + + clr_wr_ptr(bt_bmc); + + while (count) { + nwritten = min_t(ssize_t, count, sizeof(kbuffer)); + if (copy_from_user(&kbuffer, buf, nwritten)) { + ret = -EFAULT; + break; + } + + bt_writen(bt_bmc, kbuffer, nwritten); + + count -= nwritten; + buf += nwritten; + ret += nwritten; + } + + set_b2h_atn(bt_bmc); + +out_unlock: + mutex_unlock(&bt_bmc->mutex); + return ret; +} + +static long bt_bmc_ioctl(struct file *file, unsigned int cmd, + unsigned long param) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + + switch (cmd) { + case BT_BMC_IOCTL_SMS_ATN: + set_sms_atn(bt_bmc); + return 0; + } + return -EINVAL; +} + +static int bt_bmc_release(struct inode *inode, struct file *file) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + + atomic_dec(&open_count); + set_b_busy(bt_bmc); + return 0; +} + +static __poll_t bt_bmc_poll(struct file *file, poll_table *wait) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + __poll_t mask = 0; + u8 ctrl; + + poll_wait(file, &bt_bmc->queue, wait); + + ctrl = bt_inb(bt_bmc, BT_CTRL); + + if (ctrl & BT_CTRL_H2B_ATN) + mask |= EPOLLIN; + + if (!(ctrl & (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) + mask |= EPOLLOUT; + + return mask; +} + +static const struct file_operations bt_bmc_fops = { + .owner = THIS_MODULE, + .open = bt_bmc_open, + .read = bt_bmc_read, + .write = bt_bmc_write, + .release = bt_bmc_release, + .poll = bt_bmc_poll, + .unlocked_ioctl = bt_bmc_ioctl, +}; + +static void poll_timer(struct timer_list *t) +{ + struct bt_bmc *bt_bmc = from_timer(bt_bmc, t, poll_timer); + + bt_bmc->poll_timer.expires += msecs_to_jiffies(500); + wake_up(&bt_bmc->queue); + add_timer(&bt_bmc->poll_timer); +} + +static irqreturn_t bt_bmc_irq(int irq, void *arg) +{ + struct bt_bmc *bt_bmc = arg; + u32 reg; + + reg = readl(bt_bmc->base + BT_CR2); + + reg &= BT_CR2_IRQ_H2B | BT_CR2_IRQ_HBUSY; + if (!reg) + return IRQ_NONE; + + /* ack pending IRQs */ + writel(reg, bt_bmc->base + BT_CR2); + + wake_up(&bt_bmc->queue); + return IRQ_HANDLED; +} + +static int bt_bmc_config_irq(struct bt_bmc *bt_bmc, + struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int rc; + u32 reg; + + bt_bmc->irq = platform_get_irq_optional(pdev, 0); + if (bt_bmc->irq < 0) + return bt_bmc->irq; + + rc = devm_request_irq(dev, bt_bmc->irq, bt_bmc_irq, IRQF_SHARED, + DEVICE_NAME, bt_bmc); + if (rc < 0) { + dev_warn(dev, "Unable to request IRQ %d\n", bt_bmc->irq); + bt_bmc->irq = rc; + return rc; + } + + /* + * Configure IRQs on the bmc clearing the H2B and HBUSY bits; + * H2B will be asserted when the bmc has data for us; HBUSY + * will be cleared (along with B2H) when we can write the next + * message to the BT buffer + */ + reg = readl(bt_bmc->base + BT_CR1); + reg |= BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY; + writel(reg, bt_bmc->base + BT_CR1); + + return 0; +} + +static int bt_bmc_probe(struct platform_device *pdev) +{ + struct bt_bmc *bt_bmc; + struct device *dev; + int rc; + + dev = &pdev->dev; + dev_info(dev, "Found bt bmc device\n"); + + bt_bmc = devm_kzalloc(dev, sizeof(*bt_bmc), GFP_KERNEL); + if (!bt_bmc) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, bt_bmc); + + bt_bmc->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(bt_bmc->base)) + return PTR_ERR(bt_bmc->base); + + mutex_init(&bt_bmc->mutex); + init_waitqueue_head(&bt_bmc->queue); + + bt_bmc->miscdev.minor = MISC_DYNAMIC_MINOR; + bt_bmc->miscdev.name = DEVICE_NAME; + bt_bmc->miscdev.fops = &bt_bmc_fops; + bt_bmc->miscdev.parent = dev; + rc = misc_register(&bt_bmc->miscdev); + if (rc) { + dev_err(dev, "Unable to register misc device\n"); + return rc; + } + + bt_bmc_config_irq(bt_bmc, pdev); + + if (bt_bmc->irq >= 0) { + dev_info(dev, "Using IRQ %d\n", bt_bmc->irq); + } else { + dev_info(dev, "No IRQ; using timer\n"); + timer_setup(&bt_bmc->poll_timer, poll_timer, 0); + bt_bmc->poll_timer.expires = jiffies + msecs_to_jiffies(10); + add_timer(&bt_bmc->poll_timer); + } + + writel((BT_IO_BASE << BT_CR0_IO_BASE) | + (BT_IRQ << BT_CR0_IRQ) | + BT_CR0_EN_CLR_SLV_RDP | + BT_CR0_EN_CLR_SLV_WRP | + BT_CR0_ENABLE_IBT, + bt_bmc->base + BT_CR0); + + clr_b_busy(bt_bmc); + + return 0; +} + +static int bt_bmc_remove(struct platform_device *pdev) +{ + struct bt_bmc *bt_bmc = dev_get_drvdata(&pdev->dev); + + misc_deregister(&bt_bmc->miscdev); + if (bt_bmc->irq < 0) + del_timer_sync(&bt_bmc->poll_timer); + return 0; +} + +static const struct of_device_id bt_bmc_match[] = { + { .compatible = "aspeed,ast2400-ibt-bmc" }, + { .compatible = "aspeed,ast2500-ibt-bmc" }, + { .compatible = "aspeed,ast2600-ibt-bmc" }, + { }, +}; + +static struct platform_driver bt_bmc_driver = { + .driver = { + .name = DEVICE_NAME, + .of_match_table = bt_bmc_match, + }, + .probe = bt_bmc_probe, + .remove = bt_bmc_remove, +}; + +module_platform_driver(bt_bmc_driver); + +MODULE_DEVICE_TABLE(of, bt_bmc_match); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alistair Popple "); +MODULE_DESCRIPTION("Linux device interface to the IPMI BT interface"); -- cgit v1.2.3