From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/char/ipmi/ipmi_dmi.c | 223 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 223 insertions(+) create mode 100644 drivers/char/ipmi/ipmi_dmi.c (limited to 'drivers/char/ipmi/ipmi_dmi.c') diff --git a/drivers/char/ipmi/ipmi_dmi.c b/drivers/char/ipmi/ipmi_dmi.c new file mode 100644 index 000000000..bbf7029e2 --- /dev/null +++ b/drivers/char/ipmi/ipmi_dmi.c @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * A hack to create a platform device from a DMI entry. This will + * allow autoloading of the IPMI drive based on SMBIOS entries. + */ + +#define pr_fmt(fmt) "%s" fmt, "ipmi:dmi: " +#define dev_fmt pr_fmt + +#include +#include +#include +#include +#include +#include "ipmi_dmi.h" +#include "ipmi_plat_data.h" + +#define IPMI_DMI_TYPE_KCS 0x01 +#define IPMI_DMI_TYPE_SMIC 0x02 +#define IPMI_DMI_TYPE_BT 0x03 +#define IPMI_DMI_TYPE_SSIF 0x04 + +struct ipmi_dmi_info { + enum si_type si_type; + unsigned int space; /* addr space for si, intf# for ssif */ + unsigned long addr; + u8 slave_addr; + struct ipmi_dmi_info *next; +}; + +static struct ipmi_dmi_info *ipmi_dmi_infos; + +static int ipmi_dmi_nr __initdata; + +static void __init dmi_add_platform_ipmi(unsigned long base_addr, + unsigned int space, + u8 slave_addr, + int irq, + int offset, + int type) +{ + const char *name; + struct ipmi_dmi_info *info; + struct ipmi_plat_data p; + + memset(&p, 0, sizeof(p)); + + name = "dmi-ipmi-si"; + p.iftype = IPMI_PLAT_IF_SI; + switch (type) { + case IPMI_DMI_TYPE_SSIF: + name = "dmi-ipmi-ssif"; + p.iftype = IPMI_PLAT_IF_SSIF; + p.type = SI_TYPE_INVALID; + break; + case IPMI_DMI_TYPE_BT: + p.type = SI_BT; + break; + case IPMI_DMI_TYPE_KCS: + p.type = SI_KCS; + break; + case IPMI_DMI_TYPE_SMIC: + p.type = SI_SMIC; + break; + default: + pr_err("Invalid IPMI type: %d\n", type); + return; + } + + p.addr = base_addr; + p.space = space; + p.regspacing = offset; + p.irq = irq; + p.slave_addr = slave_addr; + p.addr_source = SI_SMBIOS; + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + pr_warn("Could not allocate dmi info\n"); + } else { + info->si_type = p.type; + info->space = space; + info->addr = base_addr; + info->slave_addr = slave_addr; + info->next = ipmi_dmi_infos; + ipmi_dmi_infos = info; + } + + if (ipmi_platform_add(name, ipmi_dmi_nr, &p)) + ipmi_dmi_nr++; +} + +/* + * Look up the slave address for a given interface. This is here + * because ACPI doesn't have a slave address while SMBIOS does, but we + * prefer using ACPI so the ACPI code can use the IPMI namespace. + * This function allows an ACPI-specified IPMI device to look up the + * slave address from the DMI table. + */ +int ipmi_dmi_get_slave_addr(enum si_type si_type, unsigned int space, + unsigned long base_addr) +{ + struct ipmi_dmi_info *info = ipmi_dmi_infos; + + while (info) { + if (info->si_type == si_type && + info->space == space && + info->addr == base_addr) + return info->slave_addr; + info = info->next; + } + + return 0; +} +EXPORT_SYMBOL(ipmi_dmi_get_slave_addr); + +#define DMI_IPMI_MIN_LENGTH 0x10 +#define DMI_IPMI_VER2_LENGTH 0x12 +#define DMI_IPMI_TYPE 4 +#define DMI_IPMI_SLAVEADDR 6 +#define DMI_IPMI_ADDR 8 +#define DMI_IPMI_ACCESS 0x10 +#define DMI_IPMI_IRQ 0x11 +#define DMI_IPMI_IO_MASK 0xfffe + +static void __init dmi_decode_ipmi(const struct dmi_header *dm) +{ + const u8 *data = (const u8 *) dm; + int space = IPMI_IO_ADDR_SPACE; + unsigned long base_addr; + u8 len = dm->length; + u8 slave_addr; + int irq = 0, offset = 0; + int type; + + if (len < DMI_IPMI_MIN_LENGTH) + return; + + type = data[DMI_IPMI_TYPE]; + slave_addr = data[DMI_IPMI_SLAVEADDR]; + + memcpy(&base_addr, data + DMI_IPMI_ADDR, sizeof(unsigned long)); + if (!base_addr) { + pr_err("Base address is zero, assuming no IPMI interface\n"); + return; + } + if (len >= DMI_IPMI_VER2_LENGTH) { + if (type == IPMI_DMI_TYPE_SSIF) { + space = 0; /* Match I2C interface 0. */ + base_addr = data[DMI_IPMI_ADDR] >> 1; + if (base_addr == 0) { + /* + * Some broken systems put the I2C address in + * the slave address field. We try to + * accommodate them here. + */ + base_addr = data[DMI_IPMI_SLAVEADDR] >> 1; + slave_addr = 0; + } + } else { + if (base_addr & 1) { + /* I/O */ + base_addr &= DMI_IPMI_IO_MASK; + } else { + /* Memory */ + space = IPMI_MEM_ADDR_SPACE; + } + + /* + * If bit 4 of byte 0x10 is set, then the lsb + * for the address is odd. + */ + base_addr |= (data[DMI_IPMI_ACCESS] >> 4) & 1; + + irq = data[DMI_IPMI_IRQ]; + + /* + * The top two bits of byte 0x10 hold the + * register spacing. + */ + switch ((data[DMI_IPMI_ACCESS] >> 6) & 3) { + case 0: /* Byte boundaries */ + offset = 1; + break; + case 1: /* 32-bit boundaries */ + offset = 4; + break; + case 2: /* 16-byte boundaries */ + offset = 16; + break; + default: + pr_err("Invalid offset: 0\n"); + return; + } + } + } else { + /* Old DMI spec. */ + /* + * Note that technically, the lower bit of the base + * address should be 1 if the address is I/O and 0 if + * the address is in memory. So many systems get that + * wrong (and all that I have seen are I/O) so we just + * ignore that bit and assume I/O. Systems that use + * memory should use the newer spec, anyway. + */ + base_addr = base_addr & DMI_IPMI_IO_MASK; + offset = 1; + } + + dmi_add_platform_ipmi(base_addr, space, slave_addr, irq, + offset, type); +} + +static int __init scan_for_dmi_ipmi(void) +{ + const struct dmi_device *dev = NULL; + + while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) + dmi_decode_ipmi((const struct dmi_header *) dev->device_data); + + return 0; +} +subsys_initcall(scan_for_dmi_ipmi); -- cgit v1.2.3