From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/char/tpm/tpm_tis_core.h | 220 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 drivers/char/tpm/tpm_tis_core.h (limited to 'drivers/char/tpm/tpm_tis_core.h') diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h new file mode 100644 index 000000000..b68479e0d --- /dev/null +++ b/drivers/char/tpm/tpm_tis_core.h @@ -0,0 +1,220 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2005, 2006 IBM Corporation + * Copyright (C) 2014, 2015 Intel Corporation + * + * Authors: + * Leendert van Doorn + * Kylene Hall + * + * Maintained by: + * + * Device driver for TCG/TCPA TPM (trusted platform module). + * Specifications at www.trustedcomputinggroup.org + * + * This device driver implements the TPM interface as defined in + * the TCG TPM Interface Spec version 1.2, revision 1.0. + */ + +#ifndef __TPM_TIS_CORE_H__ +#define __TPM_TIS_CORE_H__ + +#include "tpm.h" + +enum tis_access { + TPM_ACCESS_VALID = 0x80, + TPM_ACCESS_ACTIVE_LOCALITY = 0x20, + TPM_ACCESS_REQUEST_PENDING = 0x04, + TPM_ACCESS_REQUEST_USE = 0x02, +}; + +enum tis_status { + TPM_STS_VALID = 0x80, + TPM_STS_COMMAND_READY = 0x40, + TPM_STS_GO = 0x20, + TPM_STS_DATA_AVAIL = 0x10, + TPM_STS_DATA_EXPECT = 0x08, + TPM_STS_READ_ZERO = 0x23, /* bits that must be zero on read */ +}; + +enum tis_int_flags { + TPM_GLOBAL_INT_ENABLE = 0x80000000, + TPM_INTF_BURST_COUNT_STATIC = 0x100, + TPM_INTF_CMD_READY_INT = 0x080, + TPM_INTF_INT_EDGE_FALLING = 0x040, + TPM_INTF_INT_EDGE_RISING = 0x020, + TPM_INTF_INT_LEVEL_LOW = 0x010, + TPM_INTF_INT_LEVEL_HIGH = 0x008, + TPM_INTF_LOCALITY_CHANGE_INT = 0x004, + TPM_INTF_STS_VALID_INT = 0x002, + TPM_INTF_DATA_AVAIL_INT = 0x001, +}; + +enum tis_defaults { + TIS_MEM_LEN = 0x5000, + TIS_SHORT_TIMEOUT = 750, /* ms */ + TIS_LONG_TIMEOUT = 2000, /* 2 sec */ + TIS_TIMEOUT_MIN_ATML = 14700, /* usecs */ + TIS_TIMEOUT_MAX_ATML = 15000, /* usecs */ +}; + +/* Some timeout values are needed before it is known whether the chip is + * TPM 1.0 or TPM 2.0. + */ +#define TIS_TIMEOUT_A_MAX max_t(int, TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_A) +#define TIS_TIMEOUT_B_MAX max_t(int, TIS_LONG_TIMEOUT, TPM2_TIMEOUT_B) +#define TIS_TIMEOUT_C_MAX max_t(int, TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_C) +#define TIS_TIMEOUT_D_MAX max_t(int, TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_D) + +#define TPM_ACCESS(l) (0x0000 | ((l) << 12)) +#define TPM_INT_ENABLE(l) (0x0008 | ((l) << 12)) +#define TPM_INT_VECTOR(l) (0x000C | ((l) << 12)) +#define TPM_INT_STATUS(l) (0x0010 | ((l) << 12)) +#define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12)) +#define TPM_STS(l) (0x0018 | ((l) << 12)) +#define TPM_STS3(l) (0x001b | ((l) << 12)) +#define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12)) + +#define TPM_DID_VID(l) (0x0F00 | ((l) << 12)) +#define TPM_RID(l) (0x0F04 | ((l) << 12)) + +#define LPC_CNTRL_OFFSET 0x84 +#define LPC_CLKRUN_EN (1 << 2) +#define INTEL_LEGACY_BLK_BASE_ADDR 0xFED08000 +#define ILB_REMAP_SIZE 0x100 + +enum tpm_tis_flags { + TPM_TIS_ITPM_WORKAROUND = BIT(0), + TPM_TIS_INVALID_STATUS = BIT(1), + TPM_TIS_DEFAULT_CANCELLATION = BIT(2), +}; + +struct tpm_tis_data { + u16 manufacturer_id; + int locality; + int irq; + bool irq_tested; + unsigned long flags; + void __iomem *ilb_base_addr; + u16 clkrun_enabled; + wait_queue_head_t int_queue; + wait_queue_head_t read_queue; + const struct tpm_tis_phy_ops *phy_ops; + unsigned short rng_quality; + unsigned int timeout_min; /* usecs */ + unsigned int timeout_max; /* usecs */ +}; + +/* + * IO modes to indicate how many bytes should be read/written at once in the + * tpm_tis_phy_ops read_bytes/write_bytes calls. Use TPM_TIS_PHYS_8 to + * receive/transmit byte-wise, TPM_TIS_PHYS_16 for two bytes etc. + */ +enum tpm_tis_io_mode { + TPM_TIS_PHYS_8, + TPM_TIS_PHYS_16, + TPM_TIS_PHYS_32, +}; + +struct tpm_tis_phy_ops { + /* data is passed in little endian */ + int (*read_bytes)(struct tpm_tis_data *data, u32 addr, u16 len, + u8 *result, enum tpm_tis_io_mode mode); + int (*write_bytes)(struct tpm_tis_data *data, u32 addr, u16 len, + const u8 *value, enum tpm_tis_io_mode mode); + int (*verify_crc)(struct tpm_tis_data *data, size_t len, + const u8 *value); +}; + +static inline int tpm_tis_read_bytes(struct tpm_tis_data *data, u32 addr, + u16 len, u8 *result) +{ + return data->phy_ops->read_bytes(data, addr, len, result, + TPM_TIS_PHYS_8); +} + +static inline int tpm_tis_read8(struct tpm_tis_data *data, u32 addr, u8 *result) +{ + return data->phy_ops->read_bytes(data, addr, 1, result, TPM_TIS_PHYS_8); +} + +static inline int tpm_tis_read16(struct tpm_tis_data *data, u32 addr, + u16 *result) +{ + __le16 result_le; + int rc; + + rc = data->phy_ops->read_bytes(data, addr, sizeof(u16), + (u8 *)&result_le, TPM_TIS_PHYS_16); + if (!rc) + *result = le16_to_cpu(result_le); + + return rc; +} + +static inline int tpm_tis_read32(struct tpm_tis_data *data, u32 addr, + u32 *result) +{ + __le32 result_le; + int rc; + + rc = data->phy_ops->read_bytes(data, addr, sizeof(u32), + (u8 *)&result_le, TPM_TIS_PHYS_32); + if (!rc) + *result = le32_to_cpu(result_le); + + return rc; +} + +static inline int tpm_tis_write_bytes(struct tpm_tis_data *data, u32 addr, + u16 len, const u8 *value) +{ + return data->phy_ops->write_bytes(data, addr, len, value, + TPM_TIS_PHYS_8); +} + +static inline int tpm_tis_write8(struct tpm_tis_data *data, u32 addr, u8 value) +{ + return data->phy_ops->write_bytes(data, addr, 1, &value, + TPM_TIS_PHYS_8); +} + +static inline int tpm_tis_write32(struct tpm_tis_data *data, u32 addr, + u32 value) +{ + __le32 value_le; + int rc; + + value_le = cpu_to_le32(value); + rc = data->phy_ops->write_bytes(data, addr, sizeof(u32), + (u8 *)&value_le, TPM_TIS_PHYS_32); + return rc; +} + +static inline int tpm_tis_verify_crc(struct tpm_tis_data *data, size_t len, + const u8 *value) +{ + if (!data->phy_ops->verify_crc) + return 0; + return data->phy_ops->verify_crc(data, len, value); +} + +static inline bool is_bsw(void) +{ +#ifdef CONFIG_X86 + return ((boot_cpu_data.x86_model == INTEL_FAM6_ATOM_AIRMONT) ? 1 : 0); +#else + return false; +#endif +} + +void tpm_tis_remove(struct tpm_chip *chip); +int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq, + const struct tpm_tis_phy_ops *phy_ops, + acpi_handle acpi_dev_handle); + +#ifdef CONFIG_PM_SLEEP +int tpm_tis_resume(struct device *dev); +#endif + +#endif -- cgit v1.2.3