From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clk/at91/at91rm9200.c | 217 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 217 insertions(+) create mode 100644 drivers/clk/at91/at91rm9200.c (limited to 'drivers/clk/at91/at91rm9200.c') diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c new file mode 100644 index 000000000..16870943a --- /dev/null +++ b/drivers/clk/at91/at91rm9200.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include + +#include + +#include "pmc.h" + +static DEFINE_SPINLOCK(rm9200_mck_lock); + +struct sck { + char *n; + char *p; + u8 id; +}; + +struct pck { + char *n; + u8 id; +}; + +static const struct clk_master_characteristics rm9200_mck_characteristics = { + .output = { .min = 0, .max = 80000000 }, + .divisors = { 1, 2, 3, 4 }, +}; + +static u8 rm9200_pll_out[] = { 0, 2 }; + +static const struct clk_range rm9200_pll_outputs[] = { + { .min = 80000000, .max = 160000000 }, + { .min = 150000000, .max = 180000000 }, +}; + +static const struct clk_pll_characteristics rm9200_pll_characteristics = { + .input = { .min = 1000000, .max = 32000000 }, + .num_output = ARRAY_SIZE(rm9200_pll_outputs), + .output = rm9200_pll_outputs, + .out = rm9200_pll_out, +}; + +static const struct sck at91rm9200_systemck[] = { + { .n = "udpck", .p = "usbck", .id = 1 }, + { .n = "uhpck", .p = "usbck", .id = 4 }, + { .n = "pck0", .p = "prog0", .id = 8 }, + { .n = "pck1", .p = "prog1", .id = 9 }, + { .n = "pck2", .p = "prog2", .id = 10 }, + { .n = "pck3", .p = "prog3", .id = 11 }, +}; + +static const struct pck at91rm9200_periphck[] = { + { .n = "pioA_clk", .id = 2 }, + { .n = "pioB_clk", .id = 3 }, + { .n = "pioC_clk", .id = 4 }, + { .n = "pioD_clk", .id = 5 }, + { .n = "usart0_clk", .id = 6 }, + { .n = "usart1_clk", .id = 7 }, + { .n = "usart2_clk", .id = 8 }, + { .n = "usart3_clk", .id = 9 }, + { .n = "mci0_clk", .id = 10 }, + { .n = "udc_clk", .id = 11 }, + { .n = "twi0_clk", .id = 12 }, + { .n = "spi0_clk", .id = 13 }, + { .n = "ssc0_clk", .id = 14 }, + { .n = "ssc1_clk", .id = 15 }, + { .n = "ssc2_clk", .id = 16 }, + { .n = "tc0_clk", .id = 17 }, + { .n = "tc1_clk", .id = 18 }, + { .n = "tc2_clk", .id = 19 }, + { .n = "tc3_clk", .id = 20 }, + { .n = "tc4_clk", .id = 21 }, + { .n = "tc5_clk", .id = 22 }, + { .n = "ohci_clk", .id = 23 }, + { .n = "macb0_clk", .id = 24 }, +}; + +static void __init at91rm9200_pmc_setup(struct device_node *np) +{ + const char *slowxtal_name, *mainxtal_name; + struct pmc_data *at91rm9200_pmc; + u32 usb_div[] = { 1, 2, 0, 0 }; + const char *parent_names[6]; + struct regmap *regmap; + struct clk_hw *hw; + int i; + bool bypass; + + i = of_property_match_string(np, "clock-names", "slow_xtal"); + if (i < 0) + return; + + slowxtal_name = of_clk_get_parent_name(np, i); + + i = of_property_match_string(np, "clock-names", "main_xtal"); + if (i < 0) + return; + mainxtal_name = of_clk_get_parent_name(np, i); + + regmap = device_node_to_regmap(np); + if (IS_ERR(regmap)) + return; + + at91rm9200_pmc = pmc_data_allocate(PMC_PLLBCK + 1, + nck(at91rm9200_systemck), + nck(at91rm9200_periphck), 0, 4); + if (!at91rm9200_pmc) + return; + + bypass = of_property_read_bool(np, "atmel,osc-bypass"); + + hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, + bypass); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_rm9200_main(regmap, "mainck", "main_osc"); + if (IS_ERR(hw)) + goto err_free; + + at91rm9200_pmc->chws[PMC_MAIN] = hw; + + hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0, + &at91rm9200_pll_layout, + &rm9200_pll_characteristics); + if (IS_ERR(hw)) + goto err_free; + + at91rm9200_pmc->chws[PMC_PLLACK] = hw; + + hw = at91_clk_register_pll(regmap, "pllbck", "mainck", 1, + &at91rm9200_pll_layout, + &rm9200_pll_characteristics); + if (IS_ERR(hw)) + goto err_free; + + at91rm9200_pmc->chws[PMC_PLLBCK] = hw; + + parent_names[0] = slowxtal_name; + parent_names[1] = "mainck"; + parent_names[2] = "pllack"; + parent_names[3] = "pllbck"; + hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, + parent_names, + &at91rm9200_master_layout, + &rm9200_mck_characteristics, + &rm9200_mck_lock); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_master_div(regmap, "masterck_div", + "masterck_pres", + &at91rm9200_master_layout, + &rm9200_mck_characteristics, + &rm9200_mck_lock, CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + + at91rm9200_pmc->chws[PMC_MCK] = hw; + + hw = at91rm9200_clk_register_usb(regmap, "usbck", "pllbck", usb_div); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = slowxtal_name; + parent_names[1] = "mainck"; + parent_names[2] = "pllack"; + parent_names[3] = "pllbck"; + for (i = 0; i < 4; i++) { + char name[6]; + + snprintf(name, sizeof(name), "prog%d", i); + + hw = at91_clk_register_programmable(regmap, name, + parent_names, 4, i, + &at91rm9200_programmable_layout, + NULL); + if (IS_ERR(hw)) + goto err_free; + + at91rm9200_pmc->pchws[i] = hw; + } + + for (i = 0; i < ARRAY_SIZE(at91rm9200_systemck); i++) { + hw = at91_clk_register_system(regmap, at91rm9200_systemck[i].n, + at91rm9200_systemck[i].p, + at91rm9200_systemck[i].id); + if (IS_ERR(hw)) + goto err_free; + + at91rm9200_pmc->shws[at91rm9200_systemck[i].id] = hw; + } + + for (i = 0; i < ARRAY_SIZE(at91rm9200_periphck); i++) { + hw = at91_clk_register_peripheral(regmap, + at91rm9200_periphck[i].n, + "masterck_div", + at91rm9200_periphck[i].id); + if (IS_ERR(hw)) + goto err_free; + + at91rm9200_pmc->phws[at91rm9200_periphck[i].id] = hw; + } + + of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91rm9200_pmc); + + return; + +err_free: + kfree(at91rm9200_pmc); +} +/* + * While the TCB can be used as the clocksource, the system timer is most likely + * to be used instead. However, the pinctrl driver doesn't support probe + * deferring properly. Once this is fixed, this can be switched to a platform + * driver. + */ +CLK_OF_DECLARE(at91rm9200_pmc, "atmel,at91rm9200-pmc", at91rm9200_pmc_setup); -- cgit v1.2.3