From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clk/clk-cs2000-cp.c | 634 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 634 insertions(+) create mode 100644 drivers/clk/clk-cs2000-cp.c (limited to 'drivers/clk/clk-cs2000-cp.c') diff --git a/drivers/clk/clk-cs2000-cp.c b/drivers/clk/clk-cs2000-cp.c new file mode 100644 index 000000000..320d39922 --- /dev/null +++ b/drivers/clk/clk-cs2000-cp.c @@ -0,0 +1,634 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CS2000 -- CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier + * + * Copyright (C) 2015 Renesas Electronics Corporation + * Kuninori Morimoto + */ +#include +#include +#include +#include +#include +#include +#include + +#define CH_MAX 4 +#define RATIO_REG_SIZE 4 + +#define DEVICE_ID 0x1 +#define DEVICE_CTRL 0x2 +#define DEVICE_CFG1 0x3 +#define DEVICE_CFG2 0x4 +#define GLOBAL_CFG 0x5 +#define Ratio_Add(x, nth) (6 + (x * 4) + (nth)) +#define Ratio_Val(x, nth) ((x >> (24 - (8 * nth))) & 0xFF) +#define Val_Ratio(x, nth) ((x & 0xFF) << (24 - (8 * nth))) +#define FUNC_CFG1 0x16 +#define FUNC_CFG2 0x17 + +/* DEVICE_ID */ +#define REVISION_MASK (0x7) +#define REVISION_B2_B3 (0x4) +#define REVISION_C1 (0x6) + +/* DEVICE_CTRL */ +#define PLL_UNLOCK (1 << 7) +#define AUXOUTDIS (1 << 1) +#define CLKOUTDIS (1 << 0) + +/* DEVICE_CFG1 */ +#define RSEL(x) (((x) & 0x3) << 3) +#define RSEL_MASK RSEL(0x3) +#define AUXOUTSRC(x) (((x) & 0x3) << 1) +#define AUXOUTSRC_MASK AUXOUTSRC(0x3) +#define ENDEV1 (0x1) + +/* DEVICE_CFG2 */ +#define AUTORMOD (1 << 3) +#define LOCKCLK(x) (((x) & 0x3) << 1) +#define LOCKCLK_MASK LOCKCLK(0x3) +#define FRACNSRC_MASK (1 << 0) +#define FRACNSRC_STATIC (0 << 0) +#define FRACNSRC_DYNAMIC (1 << 0) + +/* GLOBAL_CFG */ +#define FREEZE (1 << 7) +#define ENDEV2 (0x1) + +/* FUNC_CFG1 */ +#define CLKSKIPEN (1 << 7) +#define REFCLKDIV(x) (((x) & 0x3) << 3) +#define REFCLKDIV_MASK REFCLKDIV(0x3) + +/* FUNC_CFG2 */ +#define LFRATIO_MASK (1 << 3) +#define LFRATIO_20_12 (0 << 3) +#define LFRATIO_12_20 (1 << 3) + +#define CH_SIZE_ERR(ch) ((ch < 0) || (ch >= CH_MAX)) +#define hw_to_priv(_hw) container_of(_hw, struct cs2000_priv, hw) +#define priv_to_client(priv) (priv->client) +#define priv_to_dev(priv) (&(priv_to_client(priv)->dev)) + +#define CLK_IN 0 +#define REF_CLK 1 +#define CLK_MAX 2 + +static bool cs2000_readable_reg(struct device *dev, unsigned int reg) +{ + return reg > 0; +} + +static bool cs2000_writeable_reg(struct device *dev, unsigned int reg) +{ + return reg != DEVICE_ID; +} + +static bool cs2000_volatile_reg(struct device *dev, unsigned int reg) +{ + return reg == DEVICE_CTRL; +} + +static const struct regmap_config cs2000_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = FUNC_CFG2, + .readable_reg = cs2000_readable_reg, + .writeable_reg = cs2000_writeable_reg, + .volatile_reg = cs2000_volatile_reg, +}; + +struct cs2000_priv { + struct clk_hw hw; + struct i2c_client *client; + struct clk *clk_in; + struct clk *ref_clk; + struct regmap *regmap; + + bool dynamic_mode; + bool lf_ratio; + bool clk_skip; + + /* suspend/resume */ + unsigned long saved_rate; + unsigned long saved_parent_rate; +}; + +static const struct of_device_id cs2000_of_match[] = { + { .compatible = "cirrus,cs2000-cp", }, + {}, +}; +MODULE_DEVICE_TABLE(of, cs2000_of_match); + +static const struct i2c_device_id cs2000_id[] = { + { "cs2000-cp", }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cs2000_id); + +static int cs2000_enable_dev_config(struct cs2000_priv *priv, bool enable) +{ + int ret; + + ret = regmap_update_bits(priv->regmap, DEVICE_CFG1, ENDEV1, + enable ? ENDEV1 : 0); + if (ret < 0) + return ret; + + ret = regmap_update_bits(priv->regmap, GLOBAL_CFG, ENDEV2, + enable ? ENDEV2 : 0); + if (ret < 0) + return ret; + + ret = regmap_update_bits(priv->regmap, FUNC_CFG1, CLKSKIPEN, + (enable && priv->clk_skip) ? CLKSKIPEN : 0); + if (ret < 0) + return ret; + + return 0; +} + +static int cs2000_ref_clk_bound_rate(struct cs2000_priv *priv, + u32 rate_in) +{ + u32 val; + + if (rate_in >= 32000000 && rate_in < 56000000) + val = 0x0; + else if (rate_in >= 16000000 && rate_in < 28000000) + val = 0x1; + else if (rate_in >= 8000000 && rate_in < 14000000) + val = 0x2; + else + return -EINVAL; + + return regmap_update_bits(priv->regmap, FUNC_CFG1, + REFCLKDIV_MASK, + REFCLKDIV(val)); +} + +static int cs2000_wait_pll_lock(struct cs2000_priv *priv) +{ + struct device *dev = priv_to_dev(priv); + unsigned int i, val; + int ret; + + for (i = 0; i < 256; i++) { + ret = regmap_read(priv->regmap, DEVICE_CTRL, &val); + if (ret < 0) + return ret; + if (!(val & PLL_UNLOCK)) + return 0; + udelay(1); + } + + dev_err(dev, "pll lock failed\n"); + + return -ETIMEDOUT; +} + +static int cs2000_clk_out_enable(struct cs2000_priv *priv, bool enable) +{ + /* enable both AUX_OUT, CLK_OUT */ + return regmap_update_bits(priv->regmap, DEVICE_CTRL, + (AUXOUTDIS | CLKOUTDIS), + enable ? 0 : + (AUXOUTDIS | CLKOUTDIS)); +} + +static u32 cs2000_rate_to_ratio(u32 rate_in, u32 rate_out, bool lf_ratio) +{ + u64 ratio; + u32 multiplier = lf_ratio ? 12 : 20; + + /* + * ratio = rate_out / rate_in * 2^multiplier + * + * To avoid over flow, rate_out is u64. + * The result should be u32. + */ + ratio = (u64)rate_out << multiplier; + do_div(ratio, rate_in); + + return ratio; +} + +static unsigned long cs2000_ratio_to_rate(u32 ratio, u32 rate_in, bool lf_ratio) +{ + u64 rate_out; + u32 multiplier = lf_ratio ? 12 : 20; + + /* + * ratio = rate_out / rate_in * 2^multiplier + * + * To avoid over flow, rate_out is u64. + * The result should be u32 or unsigned long. + */ + + rate_out = (u64)ratio * rate_in; + return rate_out >> multiplier; +} + +static int cs2000_ratio_set(struct cs2000_priv *priv, + int ch, u32 rate_in, u32 rate_out) +{ + u32 val; + unsigned int i; + int ret; + + if (CH_SIZE_ERR(ch)) + return -EINVAL; + + val = cs2000_rate_to_ratio(rate_in, rate_out, priv->lf_ratio); + for (i = 0; i < RATIO_REG_SIZE; i++) { + ret = regmap_write(priv->regmap, + Ratio_Add(ch, i), + Ratio_Val(val, i)); + if (ret < 0) + return ret; + } + + return 0; +} + +static u32 cs2000_ratio_get(struct cs2000_priv *priv, int ch) +{ + unsigned int tmp, i; + u32 val; + int ret; + + val = 0; + for (i = 0; i < RATIO_REG_SIZE; i++) { + ret = regmap_read(priv->regmap, Ratio_Add(ch, i), &tmp); + if (ret < 0) + return 0; + + val |= Val_Ratio(tmp, i); + } + + return val; +} + +static int cs2000_ratio_select(struct cs2000_priv *priv, int ch) +{ + int ret; + u8 fracnsrc; + + if (CH_SIZE_ERR(ch)) + return -EINVAL; + + ret = regmap_update_bits(priv->regmap, DEVICE_CFG1, RSEL_MASK, RSEL(ch)); + if (ret < 0) + return ret; + + fracnsrc = priv->dynamic_mode ? FRACNSRC_DYNAMIC : FRACNSRC_STATIC; + + ret = regmap_update_bits(priv->regmap, DEVICE_CFG2, + AUTORMOD | LOCKCLK_MASK | FRACNSRC_MASK, + LOCKCLK(ch) | fracnsrc); + if (ret < 0) + return ret; + + return 0; +} + +static unsigned long cs2000_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct cs2000_priv *priv = hw_to_priv(hw); + int ch = 0; /* it uses ch0 only at this point */ + u32 ratio; + + ratio = cs2000_ratio_get(priv, ch); + + return cs2000_ratio_to_rate(ratio, parent_rate, priv->lf_ratio); +} + +static long cs2000_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct cs2000_priv *priv = hw_to_priv(hw); + u32 ratio; + + ratio = cs2000_rate_to_ratio(*parent_rate, rate, priv->lf_ratio); + + return cs2000_ratio_to_rate(ratio, *parent_rate, priv->lf_ratio); +} + +static int cs2000_select_ratio_mode(struct cs2000_priv *priv, + unsigned long rate, + unsigned long parent_rate) +{ + /* + * From the datasheet: + * + * | It is recommended that the 12.20 High-Resolution format be + * | utilized whenever the desired ratio is less than 4096 since + * | the output frequency accuracy of the PLL is directly proportional + * | to the accuracy of the timing reference clock and the resolution + * | of the R_UD. + * + * This mode is only available in dynamic mode. + */ + priv->lf_ratio = priv->dynamic_mode && ((rate / parent_rate) > 4096); + + return regmap_update_bits(priv->regmap, FUNC_CFG2, LFRATIO_MASK, + priv->lf_ratio ? LFRATIO_20_12 : LFRATIO_12_20); +} + +static int __cs2000_set_rate(struct cs2000_priv *priv, int ch, + unsigned long rate, unsigned long parent_rate) + +{ + int ret; + + ret = regmap_update_bits(priv->regmap, GLOBAL_CFG, FREEZE, FREEZE); + if (ret < 0) + return ret; + + ret = cs2000_select_ratio_mode(priv, rate, parent_rate); + if (ret < 0) + return ret; + + ret = cs2000_ratio_set(priv, ch, parent_rate, rate); + if (ret < 0) + return ret; + + ret = cs2000_ratio_select(priv, ch); + if (ret < 0) + return ret; + + ret = regmap_update_bits(priv->regmap, GLOBAL_CFG, FREEZE, 0); + if (ret < 0) + return ret; + + priv->saved_rate = rate; + priv->saved_parent_rate = parent_rate; + + return 0; +} + +static int cs2000_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate) +{ + struct cs2000_priv *priv = hw_to_priv(hw); + int ch = 0; /* it uses ch0 only at this point */ + + return __cs2000_set_rate(priv, ch, rate, parent_rate); +} + +static int cs2000_set_saved_rate(struct cs2000_priv *priv) +{ + int ch = 0; /* it uses ch0 only at this point */ + + return __cs2000_set_rate(priv, ch, + priv->saved_rate, + priv->saved_parent_rate); +} + +static int cs2000_enable(struct clk_hw *hw) +{ + struct cs2000_priv *priv = hw_to_priv(hw); + int ret; + + ret = cs2000_enable_dev_config(priv, true); + if (ret < 0) + return ret; + + ret = cs2000_clk_out_enable(priv, true); + if (ret < 0) + return ret; + + ret = cs2000_wait_pll_lock(priv); + if (ret < 0) + return ret; + + return ret; +} + +static void cs2000_disable(struct clk_hw *hw) +{ + struct cs2000_priv *priv = hw_to_priv(hw); + + cs2000_enable_dev_config(priv, false); + + cs2000_clk_out_enable(priv, false); +} + +static u8 cs2000_get_parent(struct clk_hw *hw) +{ + struct cs2000_priv *priv = hw_to_priv(hw); + + /* + * In dynamic mode, output rates are derived from CLK_IN. + * In static mode, CLK_IN is ignored, so we return REF_CLK instead. + */ + return priv->dynamic_mode ? CLK_IN : REF_CLK; +} + +static const struct clk_ops cs2000_ops = { + .get_parent = cs2000_get_parent, + .recalc_rate = cs2000_recalc_rate, + .round_rate = cs2000_round_rate, + .set_rate = cs2000_set_rate, + .prepare = cs2000_enable, + .unprepare = cs2000_disable, +}; + +static int cs2000_clk_get(struct cs2000_priv *priv) +{ + struct device *dev = priv_to_dev(priv); + struct clk *clk_in, *ref_clk; + + clk_in = devm_clk_get(dev, "clk_in"); + /* not yet provided */ + if (IS_ERR(clk_in)) + return -EPROBE_DEFER; + + ref_clk = devm_clk_get(dev, "ref_clk"); + /* not yet provided */ + if (IS_ERR(ref_clk)) + return -EPROBE_DEFER; + + priv->clk_in = clk_in; + priv->ref_clk = ref_clk; + + return 0; +} + +static int cs2000_clk_register(struct cs2000_priv *priv) +{ + struct device *dev = priv_to_dev(priv); + struct device_node *np = dev->of_node; + struct clk_init_data init; + const char *name = np->name; + static const char *parent_names[CLK_MAX]; + u32 aux_out = 0; + int ref_clk_rate; + int ch = 0; /* it uses ch0 only at this point */ + int ret; + + of_property_read_string(np, "clock-output-names", &name); + + priv->dynamic_mode = of_property_read_bool(np, "cirrus,dynamic-mode"); + dev_info(dev, "operating in %s mode\n", + priv->dynamic_mode ? "dynamic" : "static"); + + of_property_read_u32(np, "cirrus,aux-output-source", &aux_out); + ret = regmap_update_bits(priv->regmap, DEVICE_CFG1, + AUXOUTSRC_MASK, AUXOUTSRC(aux_out)); + if (ret < 0) + return ret; + + priv->clk_skip = of_property_read_bool(np, "cirrus,clock-skip"); + + ref_clk_rate = clk_get_rate(priv->ref_clk); + ret = cs2000_ref_clk_bound_rate(priv, ref_clk_rate); + if (ret < 0) + return ret; + + if (priv->dynamic_mode) { + /* Default to low-frequency mode to allow for large ratios */ + priv->lf_ratio = true; + } else { + /* + * set default rate as 1/1. + * otherwise .set_rate which setup ratio + * is never called if user requests 1/1 rate + */ + ret = __cs2000_set_rate(priv, ch, ref_clk_rate, ref_clk_rate); + if (ret < 0) + return ret; + } + + parent_names[CLK_IN] = __clk_get_name(priv->clk_in); + parent_names[REF_CLK] = __clk_get_name(priv->ref_clk); + + init.name = name; + init.ops = &cs2000_ops; + init.flags = CLK_SET_RATE_GATE; + init.parent_names = parent_names; + init.num_parents = ARRAY_SIZE(parent_names); + + priv->hw.init = &init; + + ret = clk_hw_register(dev, &priv->hw); + if (ret) + return ret; + + ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &priv->hw); + if (ret < 0) { + clk_hw_unregister(&priv->hw); + return ret; + } + + return 0; +} + +static int cs2000_version_print(struct cs2000_priv *priv) +{ + struct device *dev = priv_to_dev(priv); + const char *revision; + unsigned int val; + int ret; + + ret = regmap_read(priv->regmap, DEVICE_ID, &val); + if (ret < 0) + return ret; + + /* CS2000 should be 0x0 */ + if (val >> 3) + return -EIO; + + switch (val & REVISION_MASK) { + case REVISION_B2_B3: + revision = "B2 / B3"; + break; + case REVISION_C1: + revision = "C1"; + break; + default: + return -EIO; + } + + dev_info(dev, "revision - %s\n", revision); + + return 0; +} + +static void cs2000_remove(struct i2c_client *client) +{ + struct cs2000_priv *priv = i2c_get_clientdata(client); + struct device *dev = priv_to_dev(priv); + struct device_node *np = dev->of_node; + + of_clk_del_provider(np); + + clk_hw_unregister(&priv->hw); +} + +static int cs2000_probe(struct i2c_client *client) +{ + struct cs2000_priv *priv; + struct device *dev = &client->dev; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client = client; + i2c_set_clientdata(client, priv); + + priv->regmap = devm_regmap_init_i2c(client, &cs2000_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + ret = cs2000_clk_get(priv); + if (ret < 0) + return ret; + + ret = cs2000_clk_register(priv); + if (ret < 0) + return ret; + + ret = cs2000_version_print(priv); + if (ret < 0) + goto probe_err; + + return 0; + +probe_err: + cs2000_remove(client); + + return ret; +} + +static int __maybe_unused cs2000_resume(struct device *dev) +{ + struct cs2000_priv *priv = dev_get_drvdata(dev); + + return cs2000_set_saved_rate(priv); +} + +static const struct dev_pm_ops cs2000_pm_ops = { + SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, cs2000_resume) +}; + +static struct i2c_driver cs2000_driver = { + .driver = { + .name = "cs2000-cp", + .pm = &cs2000_pm_ops, + .of_match_table = cs2000_of_match, + }, + .probe_new = cs2000_probe, + .remove = cs2000_remove, + .id_table = cs2000_id, +}; + +module_i2c_driver(cs2000_driver); + +MODULE_DESCRIPTION("CS2000-CP driver"); +MODULE_AUTHOR("Kuninori Morimoto "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3