From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clk/meson/sclk-div.c | 253 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 253 insertions(+) create mode 100644 drivers/clk/meson/sclk-div.c (limited to 'drivers/clk/meson/sclk-div.c') diff --git a/drivers/clk/meson/sclk-div.c b/drivers/clk/meson/sclk-div.c new file mode 100644 index 000000000..76d31c0a3 --- /dev/null +++ b/drivers/clk/meson/sclk-div.c @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Jerome Brunet + * + * Sample clock generator divider: + * This HW divider gates with value 0 but is otherwise a zero based divider: + * + * val >= 1 + * divider = val + 1 + * + * The duty cycle may also be set for the LR clock variant. The duty cycle + * ratio is: + * + * hi = [0 - val] + * duty_cycle = (1 + hi) / (1 + val) + */ + +#include +#include + +#include "clk-regmap.h" +#include "sclk-div.h" + +static inline struct meson_sclk_div_data * +meson_sclk_div_data(struct clk_regmap *clk) +{ + return (struct meson_sclk_div_data *)clk->data; +} + +static int sclk_div_maxval(struct meson_sclk_div_data *sclk) +{ + return (1 << sclk->div.width) - 1; +} + +static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk) +{ + return sclk_div_maxval(sclk) + 1; +} + +static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate, + unsigned long prate, int maxdiv) +{ + int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate); + + return clamp(div, 2, maxdiv); +} + +static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate, + unsigned long *prate, + struct meson_sclk_div_data *sclk) +{ + struct clk_hw *parent = clk_hw_get_parent(hw); + int bestdiv = 0, i; + unsigned long maxdiv, now, parent_now; + unsigned long best = 0, best_parent = 0; + + if (!rate) + rate = 1; + + maxdiv = sclk_div_maxdiv(sclk); + + if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) + return sclk_div_getdiv(hw, rate, *prate, maxdiv); + + /* + * The maximum divider we can use without overflowing + * unsigned long in rate * i below + */ + maxdiv = min(ULONG_MAX / rate, maxdiv); + + for (i = 2; i <= maxdiv; i++) { + /* + * It's the most ideal case if the requested rate can be + * divided from parent clock without needing to change + * parent rate, so return the divider immediately. + */ + if (rate * i == *prate) + return i; + + parent_now = clk_hw_round_rate(parent, rate * i); + now = DIV_ROUND_UP_ULL((u64)parent_now, i); + + if (abs(rate - now) < abs(rate - best)) { + bestdiv = i; + best = now; + best_parent = parent_now; + } + } + + if (!bestdiv) + bestdiv = sclk_div_maxdiv(sclk); + else + *prate = best_parent; + + return bestdiv; +} + +static long sclk_div_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + int div; + + div = sclk_div_bestdiv(hw, rate, prate, sclk); + + return DIV_ROUND_UP_ULL((u64)*prate, div); +} + +static void sclk_apply_ratio(struct clk_regmap *clk, + struct meson_sclk_div_data *sclk) +{ + unsigned int hi = DIV_ROUND_CLOSEST(sclk->cached_div * + sclk->cached_duty.num, + sclk->cached_duty.den); + + if (hi) + hi -= 1; + + meson_parm_write(clk->map, &sclk->hi, hi); +} + +static int sclk_div_set_duty_cycle(struct clk_hw *hw, + struct clk_duty *duty) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + + if (MESON_PARM_APPLICABLE(&sclk->hi)) { + memcpy(&sclk->cached_duty, duty, sizeof(*duty)); + sclk_apply_ratio(clk, sclk); + } + + return 0; +} + +static int sclk_div_get_duty_cycle(struct clk_hw *hw, + struct clk_duty *duty) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + int hi; + + if (!MESON_PARM_APPLICABLE(&sclk->hi)) { + duty->num = 1; + duty->den = 2; + return 0; + } + + hi = meson_parm_read(clk->map, &sclk->hi); + duty->num = hi + 1; + duty->den = sclk->cached_div; + return 0; +} + +static void sclk_apply_divider(struct clk_regmap *clk, + struct meson_sclk_div_data *sclk) +{ + if (MESON_PARM_APPLICABLE(&sclk->hi)) + sclk_apply_ratio(clk, sclk); + + meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1); +} + +static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long prate) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + unsigned long maxdiv = sclk_div_maxdiv(sclk); + + sclk->cached_div = sclk_div_getdiv(hw, rate, prate, maxdiv); + + if (clk_hw_is_enabled(hw)) + sclk_apply_divider(clk, sclk); + + return 0; +} + +static unsigned long sclk_div_recalc_rate(struct clk_hw *hw, + unsigned long prate) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + + return DIV_ROUND_UP_ULL((u64)prate, sclk->cached_div); +} + +static int sclk_div_enable(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + + sclk_apply_divider(clk, sclk); + + return 0; +} + +static void sclk_div_disable(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + + meson_parm_write(clk->map, &sclk->div, 0); +} + +static int sclk_div_is_enabled(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + + if (meson_parm_read(clk->map, &sclk->div)) + return 1; + + return 0; +} + +static int sclk_div_init(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); + unsigned int val; + + val = meson_parm_read(clk->map, &sclk->div); + + /* if the divider is initially disabled, assume max */ + if (!val) + sclk->cached_div = sclk_div_maxdiv(sclk); + else + sclk->cached_div = val + 1; + + sclk_div_get_duty_cycle(hw, &sclk->cached_duty); + + return 0; +} + +const struct clk_ops meson_sclk_div_ops = { + .recalc_rate = sclk_div_recalc_rate, + .round_rate = sclk_div_round_rate, + .set_rate = sclk_div_set_rate, + .enable = sclk_div_enable, + .disable = sclk_div_disable, + .is_enabled = sclk_div_is_enabled, + .get_duty_cycle = sclk_div_get_duty_cycle, + .set_duty_cycle = sclk_div_set_duty_cycle, + .init = sclk_div_init, +}; +EXPORT_SYMBOL_GPL(meson_sclk_div_ops); + +MODULE_DESCRIPTION("Amlogic Sample divider driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3